Wifi Drivers not working for 500-205t

Hi,
Ive tried all drivers listed for the model. none have worked. Win 7 64bit
The HW id for the devices are:
BCM43142A0
USB/VID_0A5C&PID_216C&REV_0012
Network Controller
PCI\VEN_14E4&DEV_4365&SUBSYS_2230103C&REV_01
Ant help would be appreciated.
Thx
This question was solved.
View Solution.

Hi:
Please see if these drivers work...
Wireless:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405371&sp...
Bluetooth:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405371&sp...

Similar Messages

Wifi is not working for me but woking for everyonne else in my house

Hi my wifi on my ipod5 is not working I am the only one it is not working for.. also I turned off my imessage because I noticed it was taking a very long time to send the message and it made me sign in like normal and i was not able to sign in because i didn't have wifi. PLEASE HELP!!!

open settings, wifi and find the network name. Does it connect? Does it prompt for a password? What happens?

Network controller, pci device, wifi drivers not working

my device model is dv6-6121tx
i am not able to install network controller and PCI device drivers...
also my wifi is not working..
no wireless adapter in device manager..
please help...
This question was solved.
View Solution.

Hello again samyak. You are very welcome!
The first device (the virtual adapter) is virtual network which allows you to use the computer as a "software router." Unless you're using this PC as an Access Point this device is useless to you. This article has more information on the service. Your best bet is to just disable it. Try the following.
Click Start, go to "All Programs," and select "Accessories."
Right click on "Command Prompt" and select "Run as Administrator."
Type the command "netsh wlan set hostednetwork [mode=disallow] and press Enter. This should disable the virtual adapter.
Exit Command Prompt, reboot the computer, and verify that the device is no longer listed.
The device with the "ACPI/HPQ0004" ID actually returned two results. The first was the Quick Launch Button software. The other was related to Hard Drive Protection. Try this driver.
Make sure to reboot after all of these instructions have been completed. Then go back to Device Manager and verify whether everything looks as it should.
Continue to have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

HP Probook 4440s WIFI Drivers Not Working After Windows 10 Update

I updated my Hp ProBook 4440s from windows 7 32 bit to Windows 10 32 bit, everything is working except for my WiFi it says 'Windows did not detect any networking hardware' Can you please provide me with the compatible wifi drivers for Windows 10 Pro 32 bit. I hope you can help

Hi: I guess what I meant to say is that you may want to play around with some of the advanced settings for the card in the device manager. It seems that reading the article you posted, that procedure may have been for folks that have Cisco software to allow for Virtual Private Networking (VPN) and I don't think the drivers you have include any Cisco extensions. You can see if there is Cisco networking software by going to the Programs menu in the control panel and see the list of programs installed. There are usually 2-3 Cisco networking software items listed if you do. Sometimes tweaking those advanced settings help. Here is an article that explains what some of these settings are for. http://superuser.com/questions/342759/can-somebody-explain-about-wi-fi-device-manager-settings-and-power-settings-in-w The ones I normally change are: Enable WMM. Set Roam tendency to conservative. Roam decision to optimize distance. I had to change some setting on an old Intel 5300 wireless card to allow it to connect in W10. The drivers were there, etc but when I went to connect to a network, it did nothing.

HP drivers not working for Windows 8.1

Hi,
I've been given this laptop and it came pre-installed with Windows 8, touch screen and every driver works fine on Windows 8 till I've upgraded it to Windows 8.1, touch screen no longer works installed the latest driver from the HP website and the own built in HP support assistant and verified it works for 8.1 and it still does not work. Any help would be much appreciated.
Regards.

Hi there @DuskHunter
Welcome to the HP Support Forums!
I understand that you updated to windows 8.1 , and now some devices are not working correctly. You did not specify the exact product you have , but I did find the support page for the closely related 14-n033tx, so you can give the drivers there a try.
HP Pavilion TouchSmart 14-n033tx Ultrabook Drivers
If not, then please post the full product number for your notebook. See the following, if you need help in finding that.
How Do I Find My Model Number or Product Number?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Sound & Graphics Drivers not working for Qosmio F15R

I was granted this Laptop with nothing more than AC Adapter. I didn't need the information contained in it and didn't want to deal with its configuration issues either, so I started planning formatting it. Looking for model number label at the bottom found it says "Qosmio F15R". I couldn't found this model number at support website for drivers, closest model was F-15AV201, figured it out by watching its pictures in detailed specs documentation. Everything but Bluetooth seemed to be available, so I formatted and reinstalled Windows XP Pro SP3 and then downloaded all drivers. Touchpad, Ethernet, Wireless, Flash memory, TV-FM and DVD-RAM worked just fine. On the other hand Sound, Display and Modem didn't work at all.
While installing Sound driver I got this error message:
http://img21.imageshack.us/img21/5075/sounddriver.png
(it says: "couldn't find driver, reboot and reinstall")
After installing Display driver checked display adapter properties and found this:
http://img402.imageshack.us/img402/5171/vga.png
(no information available and even scrolling on web browser is crappy)
After installing Modem driver realized it was not identified:
http://img237.imageshack.us/img237/4613/devicemanager.png
(Sound, Display, unknown device, Modem)
I thought I was using drivers for wrong model, so I downloaded PC Wizard, a freeware that identifies hardware configuration:
http://img262.imageshack.us/img262/6452/pcwizard.png
wich gave me chipset, processor, video card and-
http://img175.imageshack.us/img175/4121/soundr.png
-sound card: 82801FB ICH6 AC'97.
I couldn't find any proper driver nor for sound nor display, so I tried a shareware, Everest:
http://img337.imageshack.us/img337/6199/everesth.png
wich showed me the same chipset, video card and sound card model numbers than PC Wizard.
I realized that chipset, and display model didn't match detailed specs documentation. I thought that hardware was not working properly, so I downloaded and installed a Linux distro (Kubuntu 9.10 RC i386), and fount out that display and sound were working just fine but I need it to work properly with Windows XP.
Can anyone tell me where can I get sound and display drivers (and even Bluetooth if possible) for this laptop? Thanks in advance. Regards.

I have the same problem with audio driver. I can send you the graphic driver that works with Qosmio F15R if you need. My email: [email protected] Toshiba is so bad in supporting with their products.

Itunes wifi sync not working for iPhone 4s ?

i have a MBP 15'' , 3 iPhone 4s , 1 iPad 3 but only MY iphone 4s is not syncing over wifi , it syncs via usb cable but not when i connect to charger and connected to wifi or even when i press the itunes wifi sync in the settings it syas looking for MBP and does not sync , whereas all my other gadgets like ipad and iphones automatically sync as soon as they are in wifi zone . i tried everything like reeboting my iphone and quitting and reopening my itunes but nothing helped checked and unchecked the "sync with this iphone over wifi" several times still nothing then even tried changing the ip address but no , then even restored my iphone from backup even then nothing helped , and even did all the obvious things like connected bluethooth , used iphone remort for itunes , and even did homesharing of itune library through iphone , nothing helped so if anyone knows how to get this straight please let me know .. and yes i even checked the iphone and itunes version they are both up to date

hey kasey, i dont know why you have to do that or why does it not work even with all the right settings but what i know is after that process that i just explained above your problem will be gone and iphone will wifi sync as soon as you enter the wifi zone
the cause of the problem might be ( what i think is ) when you update you iphone software directly from iphone instead through your computer you get this problem because for me also it was working finely until i updated to 5.1.1 from iphone itself and wich caused me so much trouble, well now i have installed IOS6 and working great .evean if you did not update your iphone and still got this problem can be due to the reason that sometimes your iphone or computer cahnges some internet settings on theri on for their best connection which might cause confusion between 2 gadgets .

X201 Tablet: Drivers not working for Network controller on Windows 7 Pro x64

Hello,
After downloading and installing all LAN and WLAN drivers for X201 Tablet, I couldn't find one that works on Windows 7 x64.
How can I proceed?
Thank you in advance
Solved!
Go to Solution.

I fixed it by downloading this drivers:
https://downloadcenter.intel.com/download/18713/Network-Adapter-Driver-for-Windows-7-
And after installing them and restarting, searching for them manually from the Device Manager.
Cheers

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Hi I have iphone 4s and my Bluetooth and wifi do not work. it was working before and I did not do any update for IOS or anything but it just happened. what I should I do to resolve this?

Hi I have iphone 4s and my Bluetooth and wifi do not work. it was working before and I did not do any update for IOS or anything but it just happened. what I should I do to resolve this?

Hae you tried to do a hard reset of your phone? This will not lose any data. Hold the sleep/wake button and the home button until the phone turns off ignoring any slide to power off messages. Then power the phone back on.

After upgrading iOS 7 on my iPhone 5, the wifi is not working . It cannot detect any wifi nor am I able to enable wifi under settings. Is there a way for me to fix this?

After upgrading iOS 7 on my iPhone 5, the wifi is not working . It cannot detect any wifi nor am I able to enable wifi under settings. Is there a way for me to fix this?

Hi samer almasri,
If you are having issues with enabling Wifi on your iPhone you may want to try a couple of things to troubleshoot. First of all I would quit all open applications on the phone and try again. See this previous thread for how -
How do I close apps on my iPhone with iOS 7?
https://discussions.apple.com/thread/5581063
Next, I would try restarting the iPhone -
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
If the issue is still present, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
Thanks for using Apple Support Communities.
Best,
Brett L

Wifi driver not installing for windows7 64 Bit edition

HI
i had replaced my operating system to windows ultimate Bit.
My laptop model no: G580 (20157)
after replacing my operating system all the drivers are installed successfully except network controller & USB 3.0 host controller.
then after i tried to reinstall my driver and installed my driver.but wifi is not working
please help me my wifi driver is installed but not working.i had installed energy management then from shortcut i turn on my wifi but it is not turningon.
and when i searched from CMD promt(c:\netsh wlan show drivers),it gives there is no wifi driver found.
please anyone suggest me wether there is any other driver for this problem....

Hi Slape84,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the Wireless driver is not getting installed in your G580 laptop after re-installing OS (Operating System), I suggest you to check if the Wireless is enabled in BIOS first then try to install the drivers. Below is the steps to access BIOS and check if the Wireless is enabled or not:
To enter BIOS setup utility, press F2 when the Lenovo logo appears on the screen while the computer is starting up.
NOTE: To check how the BIOS menu looks and to explore its options click here.
Now select “Configuration” Tab and enable the “Wireless LAN Support” by clicking on Enter Key when you are on the option.
Then Click on “F10” Key and then YES to save the changes that are done in BIOS, the computer will automatically restart.
Now check installing the Wireless driver in the computer, but and while installing while installing the driver right click on the downloaded file and select “Run as administrator” option to get it installed without any error.
NOTE: Please click on "Select Product" then in "QUICK PATH" enter the model no. as G580 select the exact model.
Support Drivers & Software downloads
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired and i also reset network setting but nothing gonna be worked

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

TS4062 My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

Hello there, TempestBelcher.
It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
Apple - Support - iPhone - Calls Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/calls/#section_0
If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Wifi is not working in my iphone 4s after upgrading its ios to ios 7.. now i want to downgrade it back to ios 6.1.3.. is it possible to do it and if yes then HOW?? Please help

wifi is not working on 4s after upgrading its ios version.. please help me, what to do???

thanks, but what if i restore my iphone using itunes, will it help me? actually i brought this phone from australia and now i am using it in india and it is factory unlocked.. so if i restore it to factory setting then shall i have to go through factory unlock process again or my phone will stay activated for indian telecom network?

Wifi Drivers not working for 500-205t

Similar Messages

Maybe you are looking for