Wifi email not working when travelling internationally?

On a recent trip to Canada (Dec 2014 - after update to 8.1.2), my email client did not work on either my iPhone or iPad when on WiFi. These were the same WiFi connections (family visits) that had previously worked in the summer but now email was not able to be received or sent. Internet and web-base email was fine but the IOS client did not send or receive. Is this a result of the 8.1.2 update? Not sure what other explanation is likely - there were multiple ISPs and WiFi networks involved. I tried multiple re-boots, removing and re-adding the accounts etc. but nothing worked until I drive back across the border into US cell coverage. After that, it is difficult to know whether email is being processed on WiFi or cellular when both are available - perhaps it is never using WiFi...

Having the same issue - also with a Bell phone (my boss'). He gets angry because when he arrives home or at the office he's getting a bunch of email. Now his bbm and his text are also only coming in on wifi. He has turned his wifi off in disgust.
I hope you find an answer - but I see your post is month old with nothing.

Similar Messages

  • I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired

    I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired and i also reset network setting but nothing gonna be worked

    Sounds like the device was dropped at some point and damaged as a result.
    Take it to Apple for evaluation and a replacement.

  • My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.

    My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.

    The problem would seem to be in the firewall in your router.  Have you tried disabling it? I assume you've updated the router firmware, right?  Consider bypassing the ISP provided router (using it as a modem only) and unsing another device such as an Aiport Express.

  • Hi APPLE! I have one question, Why does my iPod Touch 5-th generation WiFi is not working, When an iPod is in sleep position It appeared after the update iOS seven!! Please tell me how to fix it!!

    Hi APPLE! I have one question, Why does my iPod Touch 5-th generation WiFi is not working, When an iPod is in sleep position It appeared after the update iOS seven!! Please tell me how to fix it!!

    You are not addressing APple here. We are all just users like yourself.
    See if this long discussion for iOS 6 helps
    How do I make IOS 6 keep wifi on when...: Apple Support Communities

  • Lenovo S8-50LC Wlan(WiFi) Does not work when use Sim Cart(3G)

    Hi
    Tablet Lenovo S8-50LC
    Wlan(WiFi) Does not work when use Sim Cart(3G).
    What is the solution for this problem?
    Build Number : TABS8-50LC_S000200_150121_ROW
    SoftWarw Version : TABS8-50LC_150121

    Right, but if you have the SIM in the tablet and you put the tablet in airplane mode, does wifi work then? If so, it may be a bad SIM. Do you have another SIM you can try?

  • HT4628 The Wifi does not work when Macbook Air is started by Win8. How to let the Wifi work in Win8 ?

    Hi all,
    WIFI of Macbook Air works when the notebook started with OS X.
    But when I restart the Macbook Air with Win8, the Wifi does not work.
    The Macbook Air was bought last month. It is new model. The wifi may be a/c.
    Thanks,

    hey zyzzyxx, you're not the only one with this issue. it happens to me too. as soon as i unplug my cintiq via thunderbolt display my connection shoots straight back to having 20mbps down. i checked it using a speedtest.
    ever find a fix for it?

  • Abap Logic for performance tuning not working when using Internal tables

    Hi,
    I wrote this piece of code that is working correctly that is select SUM of cost from DSO where Plant is the same for Sales Items.
    LOOP AT RESULT_PACKAGE INTO rp.
    SELECT SUM( /N/S_STRDCOST ) FROM /N/ADSP_DPIT00 INTO
    rp-/N/S_STRDCOST
    WHERE /N42/S_SALESITEM = rp-/N42/S_ITEMID AND /N42/S_PLPLANT EQ
    rp-/N42/S_SOURCE.
    MODIFY RESULT_PACKAGE FROM rp.
    Clear rp.
    ENDLOOP.
    Now I try to rewrite it for performance tunning using internal table  but I am getting 0 values. can't figure out whats the problem and been struggling fixing it.
    TYPES : begin of ty_DSO_TABLE,
             /N42/S_STRDCOST TYPE /N/ADSP_DSPC00-/N/S_STRDCOST,
             /N42/S_ITEMID TYPE /N/ADSP_DSPC00-/N/S_ITEMID,
           end of ty_DSO_TABLE.
    DATA: it_DSO_TABLE type hashed table of ty_DSO_TABLE with unique key
    /N/S_ITEMID,
         wa_DSO_TABLE type ty_DSO_TABLE.
    Field-symbols:  <rp> TYPE tys_TG_1.
    LOOP AT RESULT_PACKAGE assigning <rp>.
      clear wa_DSO_TABLE.
    Read table IT_DSO_TABLE into wa_DSO_TABLE with table key /N/S_ITEMID
      = <rp>-/N/S_ITEMID.
      if sy-subrc ne 0.
          select SUM( /N/S_STRDCOST )  into CORRESPONDING
          FIELDS OF wa_DSO_TABLE from
          /N/ADSP_DPIT00 WHERE /N/S_SALESITEM =  <rp>-/N/S_ITEMID AND
          /N/S_PLPLANT EQ <rp>-/N/S_SOURCE.
         if sy-subrc eq 0.
              <rp>-/N/S_STRDCOST = wa_DSO_TABLE-/N/S_STRDCOST.
         endif.
    endif.
    ENDLOOP.
    Any idea whats wrong with the code
    thanks

    Hi Vaidya,
    According to the code which you have written, there is no value in table IT_DSO_TABLE when you are trying to read the values.And after the read statement you have given a condition for sy-subrc. Hence the select statement is actually not even getting executed. *Also you have not assigned the final value back to the ResultPackage.*_
    So Kindly correct your code as follows:
    Data: wa_dso type ty_DSO_TABLE.
    LOOP AT RESULT_PACKAGE assigning <rp>.
    clear wa_DSO_TABLE.
    select SUM( /N/S_STRDCOST ) into CORRESPONDING
    FIELDS OF wa_DSO_TABLE from
    /N/ADSP_DPIT00 WHERE /N/S_SALESITEM = <rp>-/N/S_ITEMID AND
    /N/S_PLPLANT EQ <rp>-/N/S_SOURCE.
    if sy-subrc eq 0.
    <rp>-/N/S_STRDCOST = wa_DSO_TABLE-/N/S_STRDCOST.
    MODIFY RESULT_PACKAGE FROM <rp>.
    endif.
    ENDLOOP.
    Hope this helps you.
    Regards,
    Satyam

  • Send file as email not working when Outlook 2013 is default mail client

    Have Adobe Reader XI 11.0.2 installed.  Running Windows 7 Pro 64 bit with Office 2013 installed.  When I set Default E-mail Application to Microsoft Outlook from Preferences I receive the following error trying to send any file as an e-mail:
    "Either there is no default mail client or the current mail client cannot fulfill the messaging request.  Please run Microsoft Outlook and set it as the default mail client."
    I have toggled Microsoft Outlook 2013 off and back on as the default e-mail handler in the Default Programs of the Control Panel, but this has not resolved the issue.
    I am guessing this may be a new bug since Outlook 2013 only recently came out, but if not, and someone has a fix, please let me know.
    Thank you,
    - Brian

    Please try the steps mentioned at: http://support.microsoft.com/kb/813745 and check whether the issue is resolved or not.
    If not, then try starting the outlook in safe mode using (Outlook.exe /safe) and check the issue again.
    Hopefully, these will resolve your issue.

  • My wifi is not working on my iphone

    hi my name is chevaughn My wifi is not working when i upgrade my iphone

    Read this http://support.apple.com/kb/ts1398

  • Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    what email service - Yahoo mail have been acting up lately
    you can try setting Mail as your email client - it resolves this pfoblem for some people
    LN

  • TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    Sorry for the delay...
    I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
    I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
    Thanks for the help, anyway!!

  • TS1398 when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to

    when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to

    First, grow up.  Just because YOUR phone isn't working, doesn't mean Apple put out bad software.  I've not had any difficulty, nor has anyone else I know.  And just how is Apple risking lives with Bluetooth kits not working?  It's YOUR decision to talk on the phone or text and drive.  Not Apple's.
    We're users here, volunteering our time to help others.  Posts like yours, which are whiny and ranting, simply means we're likely to ignore you and not provide you with any help.  Not to mention, it makes you look absolutely foolish.
    Further making you look foolish is the fact that you haven't even asked a technical support question, nor have you provided anyone here with any troubleshooting steps you might have taken, including those recommended in the user guide.
    Good luck getting help.
    GDG

  • Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting general

    my i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting >general<reset<reset network setting. but all in vain. tell me the solution

    restore your phone as new through itunes. if the issue persists after a factory restore via itunes, it means you've got a hardware issue and the phone needs to be repaired

  • My wifi is not working (location accuracy is improved when wifi is turned on.)

    Product Name iphone 4
    Version IOS 7.1.2
    my wifi is not working (location accuracy is improved when wifi is turned on.)
    No

    Please define "not working" with as much detail as possible.

Maybe you are looking for