Wifi failed to start on Intel 5100
New Linux user here, I hope to increase my skills rapidly.
I searched quite a while for a solution for this to no avail.
Wifi worked fine for me on installation but as soon as I rebooted, I received failure messages when trying to connect to my router.
When trying to access my router through wifi-menu, I recieve:
Job for netctl@wls1\x2d2WIRE740.service failed. See 'systemctl status netctl@wls1\x2d2WIRE740.service and journalctl -xn' for details.
systemctl status netctl@wls1\x2d2WIRE740.service says:
Loaded: loaded (/usr/lib/systemmd/system/[email protected]; static)
Active: inactive (dead)
Docs: man:netctl.profile(5)
journalctl -xn says:
-- Unit netctl@wls1\x2d2WIRE740.service has begun starting up.
Jan 01 06:40:43 termin01 network[2002]: Starting network profile 'wls1-2WIRE740' ...
Jan 01 06:40:43 termin01 network[2002]: The interface of network profile 'wls1-2WIRE740' is already up
Jan 01 06:40:43 termin01 systemd[1]: netctl@wls1\x2d2WIRE740.service:main process exited. code=exited, status=1/FAILURE
Jan 01 06:40:43 termin01 systemd[1]: Failed to start Automatically generated profile by wifi-menu.
Any help is much appreciated.
Thank you for your time.
New Linux user here, I hope to increase my skills rapidly.
I searched quite a while for a solution for this to no avail.
Wifi worked fine for me on installation but as soon as I rebooted, I received failure messages when trying to connect to my router.
When trying to access my router through wifi-menu, I recieve:
Job for netctl@wls1\x2d2WIRE740.service failed. See 'systemctl status netctl@wls1\x2d2WIRE740.service and journalctl -xn' for details.
systemctl status netctl@wls1\x2d2WIRE740.service says:
Loaded: loaded (/usr/lib/systemmd/system/[email protected]; static)
Active: inactive (dead)
Docs: man:netctl.profile(5)
journalctl -xn says:
-- Unit netctl@wls1\x2d2WIRE740.service has begun starting up.
Jan 01 06:40:43 termin01 network[2002]: Starting network profile 'wls1-2WIRE740' ...
Jan 01 06:40:43 termin01 network[2002]: The interface of network profile 'wls1-2WIRE740' is already up
Jan 01 06:40:43 termin01 systemd[1]: netctl@wls1\x2d2WIRE740.service:main process exited. code=exited, status=1/FAILURE
Jan 01 06:40:43 termin01 systemd[1]: Failed to start Automatically generated profile by wifi-menu.
Any help is much appreciated.
Thank you for your time.
Similar Messages
-
Device failed to start - Code 10 - Intel Wireless Card on NB550D
Hi everyone,
It's just a normal Toshiba NB550D netbook
The only thing that I change is the Wireless Card inside it: the original is a common Atheros half mini card. Recently I have the urge to use internet in 5 ghz (frequency).
Thus, I decide to replace the old one with the *half mini card Intel Wifi Link 5100 AGN*
It doesn't turn out so well. The driver is not recognised or more precisely the windows tries to install the driver but FAIL is reported. Device manager tool shows an "!" next to the network card and when I go the its properties at general tab: "*The device failed to start - Code 10*"
I tried many ways to uninstall the driver and reinstall again ; also tried to download drivers from toshiba website for intel network card.
Nothing works so far and yeah I just don't know what to do now.
The possibility that the intel card is broken or malfunctioned is eliminated because I checked that with another laptop already and it just worked like a charm.
Please help me solve this problem. I really need to use dual band (2.4 and 5 ghz) internet.
Appreciate any help!!>The possibility that the intel card is broken or malfunctioned is eliminated because I checked that with another laptop already and it just worked like a charm
Regarding the error code 10:
http://support.microsoft.com/kb/943104/en-us
+The Code 10 error pertains mainly to hardware and device driver issues or to compatibility issues between hardware drivers and additional software that is installed in Windows.+
I dont think its Wlan card issue it could be a compatibility problem between the BIOS and the WLan card.
Not all devices are supported by BIOS.
But at the other hand the WLan card appears already in device manager and therefore I think there should not be a BIOS compatibility issue.
Did you check if chipset would handle the Wlan card properly? -
Hi all,
I recently deleted a few gigs worth of photos off my iPhone 4. Ever since I've been having trouble with a few things. All software is up to date. So far here are the things I've noticed that seem suspicious.
iPhone fails to start sync using wifi. It times out on Step 1 (starting sync) or Step 2 (backup). I've tried closing and reopening iTunes, restarting the MBP and iPhone, and deleting my iPhone backup. In some cases iTunes loses the connection to phone and won't come back. It syncs fine using a USB cable, but won't get past step 2 using wifi. I hate wires so I would prefer to do this over the air.
My smart playlists no longer sync. I've tried unchecking the boxes and selecting them again, but nothing. Duplicating an exisitng smart playlist and selecting it to sync seems to have worked for now, but I'm concerned about now being able to add my original playlist. Sounds like a larger issue to me.
My iTunes screensaver on my MBP no longer displays artwork. It says there is no artwork to display, but iTunes still has artwork in it.
I've read numerous threads about all these issues. I know there are many people out there having these problems. I just haven't found a good solution for any of them. Everything was working beautifully until I tried to clean up some old stuff on my phone. Apple is playing dumb according to the people that have contacted them.
I'm running:
OSX Lion 10.7.4
iTunes 10.6.3
iOS 5.1.1
Any help is greatly appreciated.
Thanks!Just nudging this one back to the top in case anyone has some input.
-
when i try to FaceTime on my iPod touch, and the call gets accepted it says connecting... and then just goes to FaceTime failed. this started after a 800 number called my FaceTime. i have tried putting in several other emails & on diff wifi. suggestions??
i have also tried facetiming with several other people. the same thing has hapened every single time and it has always worked just fine until that 800 number called me.Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue.
http://www.apple.com/support/systemstatus/ -
I am trying to sync iphones with itunes and receive message the sync failed to start its happening with my wife's and my phone. Any suggestions?
RonKlimsyn'd to a different one? I don't understand. How can I be sure my phone is sync'd to this computer, it's plugged into it.
Thanx -
Intel(r) Management Engine Interface fails to start
HP G62 Notebook PC running 8 Gig of Memory and Windows 7 Professional 64 bit.
Get message in Device Manager of this device failing to start. with code 0000000A. Have done Bios upgrade and checked for latest driver and the system tells me I have it already, yet this error still persists.Hi,
It seems your machine has motherboard with Intel chips. And this problem occurs if you install a driver via Windows Update. You could try to upgrade the latest version driver from Intel, then this problem would be solved. Here is some information about Intel
Management Engine:
http://www.intel.com/en_US/Assets/PDF/general/ug_Intel_MEBX.pdf
Notice: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this.
“Also getting update failure on Microsoft SQL Server 2005 Service Pack 4 (KB2463332).”
This is a Service Pack for SQL server. Since this is a SQL server related issue, I suggest you could post this problem to Microsoft SQL Server forum.
http://social.technet.microsoft.com/Forums/en-US/category/sqlserver/
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
William Tan
TechNet Community Support -
[Solved] Wired connection ok but wireless problem on Intel 5100
Here is how i solved the problem :
1 - get back to the wiki doing everything in order
2 - added dbus in attition to hal in the deamon line in rc.conf
3 - put wicd at the end of the deamon line
4 - then configured wicd for my wireless network at boot : no more dbus error, and connection perfectly ok
Thx very much for the superb wiki, certainly my fault if i messed up but i still have to learn
Hi
I've got a problem with the wireless connection on my toshiba R10
my wired connection is working flawlessly but i can't use my wifi card. I'm using arch 2009.8 i686
Here is what i've done following the wiki :
1 : installed ifplugd for the RJ45 connection + added the deamon on my rc.conf
2 : installed wireless-tools
3 : installed the driver intel 5100
# pacman -S iwlwifi-5000-ucode
set up my mod_autolog yes
here is my ifconfig -a
[me@arch ~]$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1C:7E:83:EB:B4
inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21c:7eff:fe83:ebb4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:603 errors:0 dropped:0 overruns:0 frame:0
TX packets:610 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:329491 (321.7 Kb) TX bytes:84091 (82.1 Kb)
Memory:ffcc0000-ffce0000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:66 errors:0 dropped:0 overruns:0 frame:0
TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4400 (4.2 Kb) TX bytes:4400 (4.2 Kb)
wlan0 Link encap:Ethernet HWaddr 00:22:FB:04:1A:72
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wmaster0 Link encap:UNSPEC HWaddr 00-22-FB-04-1A-72-00-00-00-00-00-00-00-00-00-00
UP RUNNING MTU:0 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
I have a dbus error : « Could not connect to wicd's D-Bus interface. Check the wicd log for error messages. »
so i modified my configuration file following this topic on the french forum http://forums.archlinux.fr/topic3967.html (same error message)
here is my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="fr_FR.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/Paris"
KEYMAP="fr-pc"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="arch"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp" )
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng hal network ifplugd netfs slim crond alsa fam)
i tried to start wicd manually but it stay busy infinitely :
here is my /etc/wicd/manager-setting.conf
GNU nano 2.0.9 Fichier : /etc/wicd/manager-settings.conf
[Settings]
wireless_interface = wlan0
pref_width = 450
window_width = 530
prefer_wired = False
flush_tool = 0
use_global_dns = False
global_dns_dom = None
always_show_wired_interface = True
sudo_app = 0
global_dns_1 = None
global_dns_2 = None
global_dns_3 = None
backend = external
link_detect_tool = 0
dhcp_client = 0
window_height = 529
wired_connect_mode = 1
debug_mode = 0
sudo_app = 0
global_dns_1 = None
global_dns_2 = None
global_dns_3 = None
backend = external
link_detect_tool = 0
dhcp_client = 0
window_height = 529
wired_connect_mode = 1
debug_mode = 0
pref_height = 450
wired_interface = eth0
signal_display_type = 1
global_search_dom = None
auto_reconnect = True
wpa_driver = wext
and what i get ont the graphical interface : no wireless network found
here is my "ps aux | grep dbus"
[root@arch ~]# ps aux | grep dbus
dbus 1373 0.0 0.0 2252 940 ? Ss 14:27 0:00 /usr/bin/dbus-daemon --system
me 1703 0.0 0.0 3156 696 ? S 14:27 0:00 /usr/bin/dbus-launch --sh-syntax --exit-with-session
me 1704 0.0 0.0 2264 972 ? Ss 14:27 0:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
root 2794 0.0 0.0 3892 872 pts/1 S+ 15:11 0:00 grep dbus
in the preference settings of wicd, it's correct : eth0 as wired connection and wlan0 as wireless
here is my "iwlist wlan0"
[root@arch ~]# iwlist wlan0 scanning
wlan0 No scan results
i've tried a lspci -vv :
[me@arch ~]$ lspci -vv
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Toshiba America Info Systems Device 0001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
Subsystem: Toshiba America Info Systems Device 0001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ffcff000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: heci
Kernel modules: heci
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
Subsystem: Toshiba America Info Systems Device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at ffcc0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at ffcfe000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at cf80 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
Subsystem: Toshiba America Info Systems Device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
01:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
Subsystem: Intel Corporation Device 1301
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at ff900000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
Kernel modules: iwlagn
I suspect that something is wrong between iwlagn and iwlwifi-5000 which can cause this problem.
I have to say that I'm quite lost here, i hope someone will have an idea
thank you very much
Last edited by Janarto (2009-08-30 02:46:18)Stab in the dark...the hal daemon should start dbus, but sometimes I've been encouraged to add the dbus DAEMON explicitly (before hal).
I don't really understand dbus too intimately, but I've come across situations where although dbus is running, I can't talk to it because the DBUS_SESSION_BUS_{ADDRESS,PID,WINDOWID} variables weren't visible in the environment I was working in. For instance, if dbus is started by xinitrc, and then some system-level daemon tries to talk to dbus, usually it fails for me, and I have to use some workaround.
Now I would expect wicd to be set up so that the ordinary user doesn't encounter any problems of this sort. On the other hand, the error you're getting does say that it's dbus communication which is failing. Perhaps you could try shutting down hald and dbus, open a terminal, su -, /etc/rc.d/dbus start, and then try from that command line to tell wicd to connect? -
Unknown Status: the dependency service or group failed to start AFTER upgrading to WIN10
EDITED: Need some help with SATELLITE P50-BP/N: PSPNSU-00M004 First, after upgrading to win10, the bluetooth stopped working.did play around the device manager, checked the intel wireless 7260 driver and found a USB decriptor error.after thinking and eating and drinking, I thought that maybe I need to install the latest chipset driver for win8.Download the driver from intel's website. . . . . . then pooof bluetooth started to work again..... NOW..... Another problem came in, function keys stopped working but only from f1-f4. I reinstalled TVAP and good, my keys are back. Then another one came in, my wifi stopped working saying it has Unknown Status. so I see now this message that the dependency failed to start. tried to runnetsh winsock reset
EDITED: Need some help with SATELLITE P50-BP/N: PSPNSU-00M004 First, after upgrading to win10, the bluetooth stopped working.did play around the device manager, checked the intel wireless 7260 driver and found a USB decriptor error.after thinking and eating and drinking, I thought that maybe I need to install the latest chipset driver for win8.Download the driver from intel's website. . . . . . then pooof bluetooth started to work again..... NOW..... Another problem came in, function keys stopped working but only from f1-f4. I reinstalled TVAP and good, my keys are back. Then another one came in, my wifi stopped working saying it has Unknown Status. so I see now this message that the dependency failed to start. tried to runnetsh winsock reset
-
Cannot sync. Error message says "sync session failed to start"
I am not able to sync my ipod. The error message "the ipod could not be synced because the sync session failed to start" keeps popping up. I have tried both syncing it plugged in and by wifi and the same message appears
Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working. -
GNOME Fails to start - Polkit? Main.js? - Receive 'Oops' message.
Been using Arch for years but this is my first problem surprisingly so posting it in this Newbies section.
I have MATE, KDE, and FLUXBOX working fine as desktop environments for years. Thought I would give GNOME a try and no matter what I've tried I cannot get it working. All I get is a sad face with an 'OOPS' message on screen. Although I am prompted to enter my WiFi password presumably from NetworkManager. None of the errors listed below turn up much on Google so I thought I'd turn to the community. Any help getting GNOME working correctly would be very much appreciated.
-- Logs begin at Mon 2014-06-09 18:04:18 BST. --
Jan 19 14:26:50 glow lightdm[1574]: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0)
Jan 19 14:26:50 glow systemd-logind[432]: New session c4 of user lightdm.
Jan 19 14:26:50 glow org.a11y.Bus[1582]: Activating service name='org.a11y.atspi.Registry'
Jan 19 14:26:50 glow org.a11y.Bus[1582]: Successfully activated service 'org.a11y.atspi.Registry'
Jan 19 14:26:50 glow org.a11y.atspi.Registry[1588]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Jan 19 14:26:50 glow systemd-logind[432]: Removed session c1.
Jan 19 14:26:51 glow NetworkManager[422]: <warn> Could not get scan request result: Scan request rejected
Jan 19 14:26:59 glow login[1524]: pam_unix(login:session): session opened for user cellardoor by LOGIN(uid=0)
Jan 19 14:26:59 glow systemd-logind[432]: New session c5 of user cellardoor.
Jan 19 14:26:59 glow login[1524]: LOGIN ON tty3 BY cellardoor
Jan 19 14:27:16 glow org.a11y.Bus[1718]: Activating service name='org.a11y.atspi.Registry'
Jan 19 14:27:16 glow org.a11y.Bus[1718]: Successfully activated service 'org.a11y.atspi.Registry'
Jan 19 14:27:16 glow org.a11y.atspi.Registry[1725]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Jan 19 14:27:16 glow gnome-keyring-daemon[1735]: couldn't access control socket: /run/user/1000/keyring/control: No such file or directory
Jan 19 14:27:16 glow gnome-session[1714]: ** Message: couldn't access control socket: /run/user/1000/keyring/control: No such file or directory
Jan 19 14:27:16 glow gnome-session[1714]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
Jan 19 14:27:16 glow gnome-session[1714]: GPG_AGENT_INFO=/run/user/1000/keyring/gpg:0:1
Jan 19 14:27:16 glow gnome-session[1714]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
Jan 19 14:27:16 glow rtkit-daemon[833]: Successfully made thread 1753 of process 1753 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jan 19 14:27:16 glow rtkit-daemon[833]: Supervising 2 threads of 2 processes of 1 users.
Jan 19 14:27:16 glow pulseaudio[1753]: Daemon already running.
Jan 19 14:27:16 glow dbus[425]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
Jan 19 14:27:16 glow dbus[425]: [system] Successfully activated service 'org.freedesktop.hostname1'
Jan 19 14:27:16 glow dbus[425]: [system] Activating via systemd: service name='org.freedesktop.locale1' unit='dbus-org.freedesktop.locale1.service'
Jan 19 14:27:16 glow dbus[425]: [system] Successfully activated service 'org.freedesktop.locale1'
Jan 19 14:27:16 glow gnome-session[1714]: (gnome-shell:1773): Gjs-WARNING **: JS ERROR: Error: Requiring Polkit, version none: Typelib file for namespace 'Polkit' (any version) not found
Jan 19 14:27:16 glow gnome-session[1714]: @resource:///org/gnome/shell/ui/endSessionDialog.js:28
Jan 19 14:27:16 glow gnome-session[1714]: @resource:///org/gnome/shell/ui/main.js:15
Jan 19 14:27:16 glow gnome-session[1714]: @<main>:1
Jan 19 14:27:16 glow gnome-session[1714]: ** Message: Execution of main.js threw exception: JS_EvaluateScript() failed
Jan 19 14:27:16 glow gnome-session[1714]: gnome-session[1714]: WARNING: App 'gnome-shell.desktop' exited with code 1
Jan 19 14:27:16 glow gnome-session[1714]: WARNING: App 'gnome-shell.desktop' exited with code 1
Jan 19 14:27:17 glow gnome-session[1714]: (gnome-shell:1790): Gjs-WARNING **: JS ERROR: Error: Requiring Polkit, version none: Typelib file for namespace 'Polkit' (any version) not found
Jan 19 14:27:17 glow gnome-session[1714]: @resource:///org/gnome/shell/ui/endSessionDialog.js:28
Jan 19 14:27:17 glow gnome-session[1714]: @resource:///org/gnome/shell/ui/main.js:15
Jan 19 14:27:17 glow gnome-session[1714]: @<main>:1
Jan 19 14:27:17 glow gnome-session[1714]: ** Message: Execution of main.js threw exception: JS_EvaluateScript() failed
Jan 19 14:27:17 glow gnome-session[1714]: WARNING: App 'gnome-shell.desktop' exited with code 1
Jan 19 14:27:17 glow gnome-session[1714]: WARNING: App 'gnome-shell.desktop' respawning too quickly
Jan 19 14:27:17 glow gnome-session[1714]: gnome-session[1714]: WARNING: App 'gnome-shell.desktop' exited with code 1
Jan 19 14:27:17 glow gnome-session[1714]: gnome-session[1714]: WARNING: App 'gnome-shell.desktop' respawning too quickly
Jan 19 14:27:17 glow gnome-session[1714]: Unrecoverable failure in required component gnome-shell.desktop
Jan 19 14:27:17 glow fingerprint-polkit-agent[1806]: Got "debug" argument.
Jan 19 14:27:17 glow fingerprint-polkit-agent[1806]: started.
Jan 19 14:27:17 glow gnome-session[1714]: (uint32 1,)
Jan 19 14:27:17 glow gnome-session[1714]: Entering running state
Jan 19 14:27:17 glow gnome-session[1714]: Failed to play sound: File or data not found
Jan 19 14:27:17 glow gnome-session[1714]: New PolkitAgentListener 0xb637a0
Jan 19 14:27:17 glow gnome-session[1714]: Adding new listener PolkitQt1::Agent::Listener(0x7fff29d587e0) for 0xb637a0
Jan 19 14:27:17 glow org.gnome.zeitgeist.Engine[1718]: ** (zeitgeist-datahub:1857): WARNING **: zeitgeist-datahub.vala:226: Unable to get name "org.gnome.zeitgeist.datahub" on the bus!
Jan 19 14:27:17 glow polkitd[433]: Registered Authentication Agent for unix-session:c5 (system bus name :1.90 [/usr/lib/fingerprint-gui/fingerprint-polkit-agent -d], object path /fingerprintgui/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8)
Jan 19 14:27:17 glow fingerprint-polkit-agent[1806]: Listener "/fingerprintgui/PolicyKit1/AuthenticationAgent" registered.
Jan 19 14:27:17 glow NetworkManager[422]: <info> Auto-activating connection 'The Promised LAN'.
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) starting connection 'The Promised LAN'
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) started...
Jan 19 14:27:17 glow NetworkManager[422]: <info> (wlp3s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) scheduled...
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) complete.
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) starting...
Jan 19 14:27:17 glow NetworkManager[422]: <info> (wlp3s0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0/wireless): access point 'The Promised LAN' has security, but secrets are required.
Jan 19 14:27:17 glow NetworkManager[422]: <info> (wlp3s0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 19 14:27:17 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) complete.
Jan 19 14:27:17 glow org.freedesktop.thumbnails.Cache1[1718]: (tumblerd:1887): tumbler-WARNING **: Failed to load plugin "tumbler-raw-thumbnailer.so": libopenrawgnome.so.1: cannot open shared object file: No such file or directory
Jan 19 14:27:17 glow org.freedesktop.thumbnails.Cache1[1718]: (tumblerd:1887): tumbler-WARNING **: Failed to load plugin "tumbler-ffmpeg-thumbnailer.so": libffmpegthumbnailer.so.4: cannot open shared object file: No such file or directory
Jan 19 14:27:17 glow gnome-session[1714]: Traceback (most recent call last):
Jan 19 14:27:17 glow gnome-session[1714]: File "<frozen importlib._bootstrap>", line 2158, in _find_spec
Jan 19 14:27:17 glow gnome-session[1714]: AttributeError: 'DynamicImporter' object has no attribute 'find_spec'
Jan 19 14:27:17 glow gnome-session[1714]: During handling of the above exception, another exception occurred:
Jan 19 14:27:17 glow gnome-session[1714]: Traceback (most recent call last):
Jan 19 14:27:17 glow gnome-session[1714]: File "/usr/share/system-config-printer/applet.py", line 45, in <module>
Jan 19 14:27:17 glow gnome-session[1714]: from gi.repository import Notify
Jan 19 14:27:17 glow gnome-session[1714]: File "/usr/lib/python3.4/site-packages/gi/importer.py", line 53, in find_module
Jan 19 14:27:17 glow gnome-session[1714]: 'introspection typelib not found' % namespace)
Jan 19 14:27:17 glow gnome-session[1714]: ImportError: cannot import name Notify, introspection typelib not found
Jan 19 14:27:17 glow gnome-session[1714]: (nm-applet:1810): libnm-glib-CRITICAL **: nm_secret_agent_register: assertion 'priv->registered == FALSE' failed
Jan 19 14:27:17 glow gnome-session[1714]: nm-applet-Message: No keyring secrets found for The Promised LAN/802-11-wireless-security; asking user.
Jan 19 14:27:17 glow gnome-session[1714]: (gnome-settings-daemon:1742): GLib-GIO-CRITICAL **: g_dbus_proxy_call_internal: assertion 'G_IS_DBUS_PROXY (proxy)' failed
Jan 19 14:27:17 glow gnome-session[1714]: (gnome-settings-daemon:1742): GLib-GIO-CRITICAL **: g_dbus_proxy_call_internal: assertion 'G_IS_DBUS_PROXY (proxy)' failed
Jan 19 14:27:17 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Call to gst_discoverer_discover_uri() failed: GStreamer encountered a general stream error.
Jan 19 14:27:17 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Task for 'file:///home/cellardoor/test.webm' finished with error: Could not get any metadata for uri:'file:///home/cellardoor/test.webm' and mime:'video/webm'
Jan 19 14:27:17 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Failed to open file: No OLE2 signature
Jan 19 14:27:17 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Task for 'file:///home/cellardoor/samsungkeyforserver.pub' finished with error: Could not get any metadata for uri:'file:///home/cellardoor/samsungkeyforserver.pub' and mime:'application/vnd.ms-publisher'
Jan 19 14:27:18 glow org.gnome.OnlineAccounts[1718]: goa-daemon-Message: goa-daemon version 3.14.2 starting
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): tumbler-WARNING **: Failed to load plugin "tumbler-raw-thumbnailer.so": libopenrawgnome.so.1: cannot open shared object file: No such file or directory
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): tumbler-WARNING **: Failed to load plugin "tumbler-ffmpeg-thumbnailer.so": libffmpegthumbnailer.so.4: cannot open shared object file: No such file or directory
Jan 19 14:27:18 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Couldn't create PopplerDocument from uri:'file:///home/cellardoor/Documents/Holiday/certificate_flight_plus_2_a.pdf', PDF document is damaged
Jan 19 14:27:18 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Task for 'file:///home/cellardoor/Documents/Holiday/certificate_flight_plus_2_a.pdf' finished with error: Could not get any metadata for uri:'file:///home/cellardoor/Documents/Holiday/certificate_flight_plus_2_a.pdf' and mime:'application/pdf'
Jan 19 14:27:18 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Call to gst_discoverer_discover_uri() failed: Your GStreamer installation is missing a plug-in.
Jan 19 14:27:18 glow gnome-session[1714]: (tracker-extract:1813): Tracker-WARNING **: Task for 'file:///home/cellardoor/Documents/Java/Assignment3/evidence%20of%20testing%20and%20results%20not%20as%20expected.xcf' finished with error: Could not get any metadata for uri:'file:///home/cellardoor/Documents/Java/Assignment3/evidence%20of%20testing%20and%20results%20not%20as%20expected.xcf' and mime:'image/x-xcf'
Jan 19 14:27:18 glow gnome-session[1714]: Destroying listener
Jan 19 14:27:18 glow gnome-session[1714]: Removing listener PolkitQt1::Agent::Listener(0x7fff29d587e0)
Jan 19 14:27:18 glow polkitd[433]: Unregistered Authentication Agent for unix-session:c5 (system bus name :1.90, object path /fingerprintgui/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8)
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:1->'Hangup'
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:1->'Hangup'
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:1->'Hangup'
Jan 19 14:27:18 glow NetworkManager[422]: <warn> No agents were available for this request.
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 19 14:27:18 glow NetworkManager[422]: <warn> Activation (wlp3s0) failed for connection 'The Promised LAN'
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): deactivating device (reason 'none') [0]
Jan 19 14:27:18 glow NetworkManager[422]: <info> Auto-activating connection 'Security'.
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) starting connection 'Security'
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) started...
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) scheduled...
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:1->'Hangup'
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) complete.
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) starting...
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0/wireless): access point 'Security' has security, but secrets are required.
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 19 14:27:18 glow NetworkManager[422]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) complete.
Jan 19 14:27:18 glow NetworkManager[422]: <warn> No agents were available for this request.
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 19 14:27:18 glow NetworkManager[422]: <warn> Activation (wlp3s0) failed for connection 'Security'
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 19 14:27:18 glow NetworkManager[422]: <info> (wlp3s0): deactivating device (reason 'none') [0]
Jan 19 14:27:18 glow kernel: tracker-miner-f[1827]: segfault at 130000017a ip 00007f14f57cbdbe sp 00007ffff6a89330 error 4 in libgio-2.0.so.0.4200.1[7f14f5779000+16f000]
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Cache1[1718]: (tumblerd:1887): GVFS-RemoteVolumeMonitor-WARNING **: Owner of volume monitor org.gtk.Private.UDisks2VolumeMonitor disconnected from the bus; removing drives/volumes/mounts
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Cache1[1718]: (tumblerd:1887): GVFS-RemoteVolumeMonitor-WARNING **: Owner of volume monitor org.gtk.Private.MTPVolumeMonitor disconnected from the bus; removing drives/volumes/mounts
Jan 19 14:27:18 glow NetworkManager[422]: <warn> Could not get scan request result: Scan request rejected
Jan 19 14:27:18 glow org.a11y.Bus[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow gnome-session[1714]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:15->'Terminated'
Jan 19 14:27:18 glow org.gtk.vfs.Daemon[1718]: A connection to the bus can't be made
Jan 19 14:27:18 glow org.gtk.vfs.Daemon[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.freedesktop.Tracker1[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gtk.vfs.Daemon[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gnome.OnlineAccounts[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gtk.Private.UDisks2VolumeMonitor[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gtk.Private.MTPVolumeMonitor[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gnome.evolution.dataserver.Sources3[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gnome.zeitgeist.Engine[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.freedesktop.Tracker1[1718]: Received signal:15->'Terminated'
Jan 19 14:27:18 glow org.freedesktop.Tracker1[1718]: OK
Jan 19 14:27:18 glow ca.desrt.dconf[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow gnome-session[1714]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gnome.zeitgeist.Engine[1718]: [14:27:18.337568 WARNING] zeitgeist-daemon.vala:449: The connection is closed
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:15->'Terminated'
Jan 19 14:27:18 glow gnome-session[1714]: OK
Jan 19 14:27:18 glow org.freedesktop.Telepathy.AccountManager[1718]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow org.gnome.evolution.dataserver.Calendar4[1718]: Could not connect: Connection refused
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: Error creating proxy: The connection is closed (g-io-error-quark, 18)
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: Error creating proxy: Error calling StartServiceByName for org.gtk.Private.MTPVolumeMonitor: The connection is closed (g-io-error-quark, 18)
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: Error creating proxy: Error calling StartServiceByName for org.gtk.vfs.Daemon: The connection is closed (g-io-error-quark, 18)
Jan 19 14:27:18 glow gnome-session[1714]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jan 19 14:27:18 glow gnome-session[1714]: Received signal:15->'Terminated'
Jan 19 14:27:18 glow org.freedesktop.thumbnails.Thumbnailer1[1718]: (tumblerd:1909): tumblerd-WARNING **: Failed to start the thumbnail cache service: Another thumbnail cache service is already running
Jan 19 14:27:18 glow gnome-session[1714]: OK
Jan 19 14:27:18 glow systemd-coredump[1943]: Process 1827 (tracker-miner-f) of user 1000 dumped core.
Thank you!
Moderator edit: Added code tags
Last edited by ewaller (2015-01-19 15:57:10)Please use code tags when posting logs. From
Jan 19 14:27:16 glow gnome-session[1714]: ** Message: couldn't access control socket: /run/user/1000/keyring/control: No such file or directory
Jan 19 14:27:16 glow gnome-session[1714]: (gnome-shell:1773): Gjs-WARNING **: JS ERROR: Error: Requiring Polkit, version none: Typelib file for namespace 'Polkit' (any version) not found
it seems you're missing dependencies, or they're not started for some reason. Try running GNOME via GDM, installing latter should pull in the full kitchen sink. If you want more hints, google for "gjs polkit not found".
Last edited by Alad (2015-01-19 15:38:09) -
I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
On pressing retry I got the same message.
On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
I reinstalled with the same error messages and the same results.
I uninstalled existing and reinstalled from scratch and the same error messages again.
I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
I hope you can advise me how to recover my backupsHi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
Sync failed to start w/ iTunes 10.7, iPod Touch 3rd gen
Since upgrading to iTunes 10.7 on Windows 7x64, I have had trouble getting my iPod Touch (3rd gen, 5.1.1) to sync. I am getting the message "sync failed to start". This happens with either WiFi or USB connection to the device. I know the iPod WiFi is working because the Remote app shows my iTunes library, fetches email, etc.
After installing iTunes 10.7, when I connected via USB, Windows tried to search for and install new drivers. After a very long delay, I canceled the search and continued using the existing drivers. I'm not sure if this is related.I have resolved the problem by 'shutting down' my MacBook ('restarting' the computer was not sufficient to resolve it). While I was at it, I took the battery out briefly before rebooting – don't know if this made the difference, but I do know that Apple Tech Support have instructed me to remove the battery momentarily on previous occasions when resolving other issues with the computer. Anyway, either just shutting down (or shutting down + removing the battery) seems to have resolved the problem, as iTunes is once again recognising my iPod Touch and I'm able to sync again. Phew!
-
ColdFusion 8 Fails to start after update Java for Mac OSX 10.5 Update 4
I have been using ColdFusion on a Mac for years. Now CF fails to start after I updated Java for Mac OS X 10.5 Update 4. I usually start by typing in the terminal window sudo /Applications/ColdFusion8/bin/ColdFusion start.
There is a crash report but I don't know how to read it. See attached.
Please help, I need this working for my job.
Thanks...ColinDear Craig,
Macbook Pro 2.4GHz Intel Core 2 Duo 4 GB RAM
I'm sure that this is 64-bit
CF 8.0.1 Enterprise Build 3080
I had moved the Java SE 6 to the top in both Plugin and Applications. The
correct version is showing in the terminal window. See below.
Last login: Thu Jun 18 11:27:09 on ttys001
Beta-4:~ Colin$ java -version
java version "1.6.0_13"
Java(TM) SE Runtime Environment (build 1.6.0_13-b03-211)
Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02-83, mixed mode)
Beta-4:~ Colin$
CF will not start. I have the activity monitor open, and when I start CF you
see it in the activity monitor for a few seconds as it starts up. When the
message process is completed in the terminal window CF disappears in the
activity monitor.
Any suggestions?
C
Hi, Colin,
My apologies but I forgot to ask 2 questions: (1) What kind of Mac you have
(Intel or PowerPC)? (2) What version of CF are you running and what installer
did you choose (8 or 8.0.1, 32-bit, 64-bit, etc.)?
To start, try the following:
1. Normally you'd shut CF down first ... but that's not necessary for you
2. Open Java Preferences again
3. Select Java SE 6 and move it (drag) to the top spot in both section (Applet
Plugin and Applications)
4. Open Terminal
5. Type java -version (you should see 1.6.0_13 as the new version)
6. Try to start CF again
This may not work (I've had issues with it) but it's technically how it's
supposed to work. With the Java Preferences utility, you're visually setting a
default JVM (you can do it with commands in Terminal but this is much faster
and easier).
If CF still won't start, look for the jvm.config file in your CF application
folder (try /Applications/ColdFusion8/bin or
/Applications/ColdFusion8/runtime/bin -- the latter is where a jvm.config file
is on my machine for a particular version of CF that's installed similar to
yours). You can override the JVM in this file but, hopefully, that won't be
necessary!
Best,
Craig -
Failed to start org.freedesktop.Avahi
Every time during boot i see a message:
dbus[725] [system] Failed to activate service 'org.freedesktop.Avahi': timed out
What cause that service failed to start? Why it is trying to be loaded? Should be?
My system is msi wind u100 with arch and recent updates:
Linux msi 3.0-ARCH #1 SMP PREEMPT Sat Aug 6 16:49:00 CEST 2011 i686 Intel(R) Atom(TM) CPU N270 @ 1.60GHz GenuineIntel GNU/Linux
rc.conf content, if it's relevant:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="pl_PL.UTF-8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/Warsaw"
KEYMAP="pl"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(uvcvideo acpi_cpufreq cpufreq_ondemand cpufreq_powersave !ati_remote !lirc_atiusb)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="msi"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng dbus hal crond bluetooth alsa wicd !samba kdm !cups !lircd)
Last edited by bagheera (2011-08-14 08:48:29)bagheera wrote:
karol wrote:You're still using the old rc.conf setup - why? You're blacklisting modules in rc.conf, even though it doesn't work anymore.
#MOD_BLACKLIST=() #deprecated
It's commented out, so it doesn't matter
I was talking about
MODULES=(uvcvideo acpi_cpufreq cpufreq_ondemand cpufreq_powersave !ati_remote !lirc_atiusb)
http://www.archlinux.org/news/changes-t … cklisting/
Before this change you could
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist. -
HT1386 Sync session failed to start message. No help there...
Can't sync iPad because it "failed to start". Not a helpful message or direction on what to do about it? Cords hooked up, wifi enabled, everything seems to be ok, but it fails to start. Any ideas?
Try quitting iTunes, restart your computer, reset your iDevice and then try to sync again.
Reset the iDevice by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the device start up.
Maybe you are looking for
-
How to detect mobile phone number???
Hi, Is there a way to get phone number somehow? well what i m trying to do is, connect a web site from mobile and fill some fields (may be send picture to this page). While connected to this page, i want to detect and keep this mobile's number. Any s
-
Imac (intel) 2008 24" screen.
Hi there, I bought my imac (intel) in 2008 along with an Applecare plan which I forgot to register (a complete waste! silly me). Can I register it now? The box is still un-opened? Any suggestions?thanks!
-
Hello, I made a study regarding inbound communication in JCA. The assumption is about that resource adapter is effectively the client of the EJB container; so I implemented the JCA 1.0 resource adapter as it was a client. In detail: when I got a conn
-
Can't Access Netflix....HELP
03/02 Greetings: In IL Apple TV was working fine and able to access Netflix with no problems. Presently in FL for the month and don't get the list of programming, especially Netflix. Any help will be appreciated. Mike
-
I need return the result of a query on a stored procedure
I need return the result of a query on a stored procedure, I mean when I execute a stored procedure it returns a result set as a select query. Best regards...