Wifi Fix for YouTube Videos

Just in case someone hasn't found it yet, last week I figured out some of the issues with videos being blocked if you are using a Sonicwall Appliance, and possibly any other Gateway Antivirus. The "Enable HTTP Byte-Range requests with Gateway AV" check box needs to be checked in the Gateway Antivirus settings. Just an FYI...

I solved my issue by doing the following:
My Apple TVs are hardwired, not wireless, Netgear Firewall,
I found some information on Netgear Firewall and iOS6, and problems some users were having. I also remembered that I was having probems with the New iPad before the iOS 6 update, specifically the youtube app was giving me the same error message that I was seeing on the Apple TVs - "No content was found"
So these are all of the steps I took to finally get everything working:
1) I ended up resetting my Netgear VPN Firewall to factory settings, then added back my customizations and security.
2) I assigned fixed IP addresses for both my Apple TV 3 and Apple TV 2,
3) I reset each Apple TV individually, then set the Ethernet settings to Manual and assigned the IP address that I assigned in the Netgear Firewall.
4) I re-entered my iTunes ID and Password
5) I turned on Sharing, I turned on iTunes Match
6) I entered my YouTube UserName and Password. (I'm using my YouTube User Name not my google login ([email protected]))
7) Repeated 3-6 for the 2nd Apple TV
I then went to watch a YouTube video and everything is working fine again.
I'm guessing in my case the issue was the Netgear Firewall, by resetting it cleared up whatever problem was blocking YouTube. As I mentioned originally I was always able to login into both iTunes and YouTube without a problem.
Prior to resetting my router, I did reset each Apple TV on more than one occassion, but that never fixed the problem with the "No content was found. ...."
I'm happy it is working again.

Similar Messages

  • Why does it take. So much longer for YouTube videos to load on my iPad 1st gen. then on my iPod touch?

    Why does it take so much longer for YouTube videos to load on my 1st gen. iPad then on my iPod touch or my laptop?

    This is not the place to make a point. This is a user to user support forum. I do not need instructions about the use and care or alleged failure of cables. At no time did I ever say or imply that you were an idiot, that is your statement and words, not mine. Take the time to Google and you will find instances where there have been injuries and death dealing with 3rd party cables and chargers. The abilities that Apple has for manufacturing and what business decisions they make in creating their products is nothing more than speculation, and that is not allowed under the terms of the forum that you agreed on when you joined here. If you want to rant at Apple, then use the feedback link, www.apple.com/feedback. Other users cannot do anything for you.

  • What are the best settings for Youtube videos using Camileo X200

    What is the best video settings for the x200 for youtube videos. 720p-30/ 720p-60/ 1080p-30 .
    Thanks

    Hi
    In my opinion the 720p-30 is good enough for Youtube.

  • Fix for Youtube: An error occurred. Please try again later. or Youtube videos don't play.

    Try this solution.

    i tried to figure out various options (1) removing addons (2) updating flash players etc. finally i came to know that google chrome that i installed recently was the cause of this error in firefox. I uninstalled google chrome, and now youtube videos working well in my firefox. please comment if this solution has worked for you.

  • Recommended Software for YouTube video download

    Hi
    What is the best software out there (bang for buck), free or fee that allows you to download youtube videos easily on your mac and eventually burn to DVD or other formats/hardware? I've run into TubeSock. One of the formats is a save to "Mac" but will I in turn be able to burn it on DVD afterwards? Thanks.

    Hi Tonden,
    Your recommendation was right on. Thank you! I used TubeTV to download then MPEG Streamclip to convert for play on my Mac. I'd like to take these video files and burn them to my DVD. What is the format I should covert to in Streamclip for this? Can I burn multiple video clips to DVD? Do I use iDVD for burning? I guess I'm kind of confused between iDVD and imovie HD. Thanks.

  • Would Like Willing Person to Make an Intro For Youtube Videos

         I am looking for someone who would be willing to make an intro in after effects for my youtube videos. I suck at after effects and would gladly pay if I wasn't dirt poor. Eventually if I get successful enough I would pay the willing person back for all their trouble. What I would like is a white cut across a black screen similar to that of the fruit ninja cut. Then the black screen would burn away in small white flames revealing a layer behind it where I will put text and pictures.
         If anyone can help I would be very grateful, thank you. My email is [email protected] if you are interested, and of course please no spam.

    This is nothing more than an animated mask, a little glow and some fractal noise. You should be able to do this for yourself with a couple of hours research on the net looking for tutorials on masking, glow, creating fire. There's nothing magical about it just find the effect you want to duplicate, take a screen shot, and then try and figure out what elements could create the effect.
    Put up a screen shot and I'll point you in the right direction. I can't do it for you because I'm swamped and working for a promise of pay later isn't ever good for either party, but I'll gladly give you some pointers so you can do it for yourself.

  • Exporting for YouTube Videos?

    Hi, I have a fifteen minute video (320 x 180) that I'd like to upload to YouTube, but I can't find a decent preset for exporting it. When I try to export with MPEG2, the resulting video has an odd, jerking motion to it. MPEG4 exports everything as blurrily as possible. AVI works great, but the file sizes are all way over 2 gigabytes, which is YouTube's limit. The only one that works, it seems, is WMV, but each file takes 2+ hours to upload, and, once online, the videos load excruciatingly slowly.
    So, for those of you who export for YouTube: What presets do you use?

    I export to YouTube on a daily basis... here is a screen capture of my settings for HD and SD, respectively. For both, Audio is set at AAC Stereo, 48kHz, High quality, 128kbps, and multiplexing is at mp4 with standard stream compatibility (though iPod seems to work just as well).

  • Missing plugin for youtube video

    i'm trying to add youtube videos to my website in iweb.  when i click on the widget and paste my url, it says "missing plugin."  what do i do?

    This page...
    http://www.iwebformusicians.com/Website-Movie-Video/YouTube.html

  • Lack of sound for YouTube videos

    My iPad2 doesn't play any sound when I watch YouTube videos in Facebook.  All the settings within Souns appear to be correct.  It's been kike this since iOS6 update.

    I tried both your suggestions but still no change.
    The 10.4.10 update has definitely increased my Mac's maximum sound output. It's now a lot louder than it used to be, but at the expense of killing sound in my browser
    iMac G5 17" (Rev. B) Mac OS X (10.4.10)

  • What is the best compression for youtube videos ?

    I know I can go in export movie, then chosse medium for youtube, but is there a better compression because when I upload it on youtube, the quality is much lower. Should i export with QuickTime or i dunno ?
    Thnx for aswering !!

    What is your source material? If it is DV, then sending to YouTube in the Medium Preset is fine.
    If your source is AVCHD, you could import at 1920x1080. Then after editing, share using QuickTime at 1280x720 in h.264. Then upload to YouTube through the website.

  • Closed caption for youtube videos?

    How do you watch a youtube video with cc by airplay?

    When you have the YouTube app open, tap the magnifying glass in the upper right corner. Then enter closed caption in the search field. Don't forget the three dots.

  • BEST COMPRESSOR SETTINGS FOR YOUTUBE VIDEO?!?!?

    I have about a 3 min 30 sec video that I am trying to put up on youtube. I see on some youtube videos quality is still sometimes good, and on others its terrible. I am wondering what type of setup I can use in compressor to get the best quality out of my video after uploading to youtube!! Thank you

    This article is awesome:
    http://www.kenstone.net/fcphomepage/youtube_compressorgary.html
    Hope that helps!
    ~Luke

  • Sound on iPad Mini for youtube videos doesn't work

    iPad mini will play youtube videos just fine, but no sound. When accessed through facebook app, video tube, no sound. When accessed through YouPlayer, sound works fine. All other system sounds/music/etc fully functional. Nothing is muted, all volume controls that I can find are up.
    Any ideas?

    Obviously a problem with those apps then.
    You can try this:
    Make Sure iOS is updated to the latest version
    Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings

  • Best settings for YouTube video?

    I've just finished editing my first video in iMovie and would like to export it to upload to YouTube. The YouTube site asks for MPEG4 at 320x240 pixels, 30fps, with MP3 audio. But what about all the other settings in the advanced export settings? Does anyone know what they should be for best results?
    Thanks in advance.

    This, from Karsten Schlülter (YouTuber):
    I recommend in the expert settings:
    mpeg4 as comprossor
    in the options:
    320x240 (youtube's "native" res)
    30 fps (for fast action), 15 fps (to generate smaller files for longer movies)
    the bitrate slider...- 500kB/sec is an excellent quality for such res (and generates laaarge files), but the conversion at youtube adds a lot of artfifacts...
    :)Sue

  • Best camera settings for youtube videos

    What settings should I shoot video at in order to get the best youtube output?    My choices are 1920x1080-30; 1920x1080-24; 1280x720-60; 640x480-60; crop-640-60
    I'm wondering if it's better to compress a high quaility video, or can I shoot at low quality and get the same results?
    I have a Canon 60D and CS4 master collection with Premiere Pro and Encore.

    Use the preset under H.264 and set the framerate the same as your footage.
    Do a little experimenting, you dont have to upload the whole movie, couple of minutes is enough.
    HD footage can be upload as HD so why go for low.

Maybe you are looking for

  • Reference behaviour of strictly typed controls

    I have a question regarding the bahaviour of a user-made cluster which I have set to strictly typed. I am using a reference to this cluster (Which in turn contains other clusters) to automatically read an ini file. I also have an array within one of

  • Flash 10.1 Randomly going corrupt

    Hi, I am a technician with a school district.  This summer most of the computers in our schools were re-imaged with our latest images, which includes flash 10.1.53 Active X.  We are now getting tons of calls from schools reporting that Flash Player i

  • Replicating material to CRM

    Hi all, we are replicating material master data from ERP to CRM. First it all worked well, the data was sendt immediately after changing a material. But now, it is not sent automatically. We have to debug and manipulate a few variables so the correct

  • Touch ID still not working after update 7.1.1

    Hi, Like many other users, I had issues with the TouchID in 7.1 Just updated to 7.1.1 and the same issues persist. Not only am I not able to login with my touchID, I am unable to add my fingerprints upon deleting them. It always gets to the end of th

  • Export trouble shooting

    Lightroom5 , Windows 7 The export controls are greyed out and if I\ try to export a file I see the message that the export feature is disabled. Have reset export preferences with no change. How to put this right.?