Wifi hot spot and USB tethering not working

I updated my both Lenovo a 7000a phones to Bulid Number A7000-a_S144_150721_ROW today, Since then both of my phones stopped Wi Fi Tethering and USB Tethering.Base Band Version A7000.ROW.V15,2015/07/21 20.44I would like to mention further that Both the Wifi Tethering and USB tethering were working fine before the update! This is in contrast to the Previous bug found in S 142 version! Now devices are being connected but with limited connectivity.Please comment for a solution!

I would like to mention further that Both the Wifi Tethering and USB tethering were working fine before the update! This is in contrast to the Previous bug found in S 142 version! Now devices are being connected but with limited connectivity.

Similar Messages

HT4587 My airport express and wireless airplay speaker are connected to wife, but airplay and homesharing are not working...what to do?

My airport express and wireless airplay speaker are connected to WIFI, but airplay and homesharing are not working...what to do? Everything was working fine until about two weeks ago, all of the sudden airplay has disappeared from the iphone, itunes on the laptop, and the apple remote for iphone. I have restarted the router many times, re-setup the airplay speaker and the airport express and booth are showing as being properly connected to the router when I log into the router IP address. I was on the phone with Apple support for 30 minutes they blames verizon, got on the phone with verizon and they stated the settings were all correct and compatible with apple, got back on the phone with apple and they again are blaming verizon and trying to get me to get an airport extreme because that would fix the problem...any suggestions, please!

There are three Airport resets, soft, hard and factory default. It would probably be beneficial if you tried each one in sequence. Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.

Touchsmart TX-2 fingerprint scanner and USB ports not working

Hi everyone,
Please forgive me if this is in the wrong spot.
Just sent my laptop (Touchsmart TX-2 1015au) off for a warranty fix - told them the USB ports weren't working on Windows 7, 64 bit. It came back wiped, running on Vista 32 bit and.....with the USB ports not working.
I figured I'd try to get it working because I need my laptop for uni and can't send it back right now. So I clean installed Windows 7, 64 bit again and its still not working. Did the standard open device manager and uninstall everything under the usb tab. All that has resulted in is causing the fingerprint scanner to stop working (being told that it is not connected) and still no working USB ports.
All advice really welcome and very much appreciated!
Thanks in advance

Hi:
Should be no problem to get W7 32 bit to work on that model.
Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
Your model uses the Intel HD graphics driver only.
The first driver you have to install is the Intel chipset installation utility and then reboot.
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
Audio: Accept the agreement. Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

Mobile Hot Spot on Driod Charge not working and can't figure out how to tether.

I called support and they told me the wifi hotspot was out system wide, not just on my Driod Charge. Can anyone confirm this? Also I was told I could tether my Charge with Verizon's software. The tech sent me the link to download the software. BUT, the download link has many choices as to which handheld you will be tethering. The Droid Charge is not one of them. Can anyone tell me which device that was listed will work with my phone?

Will be fixed with the update today & tonight:
http://support.vzw.com/pdf/system_update/droid_charge.pdf

Why is my Intel iMac restarting randomly and USB keyboard not working randomly?

My intel iMac has been randomly rebooting itself without any error messages. It also seems to coincide with the keyboard (USB) not working, but not always. At first, it seemed to happen right after waking the computer from sleep, but now it happens when I am just sitting at the computer about once or twice a day. For now, i have temporarily removed all external devices (except time capsule) and disabled any bluetooth or iTunes synch'ing over wifi. I have also disabled all power management features.
I've tried different keyboards and resetting the SMC. Could bad memory cause this?

Could be anything from a loose power cable, to loose or bad RAM module.
1. Check all your power connections, including the mag connector on the back of the iMac.
2. Reinstall the RAM modules, as per > iMac: How to remove or install memory. When installing new or reinstalling RAM, be sure to push firmly on each module with both thumbs to insure that they are fully seated in the slots.
Then if it is still acting up...
3. Run the > Extended Apple Hardware Test

Webcam and usb drive not working--possible hardware issue?

Hello,
I recently purchased a Lenovo ideapad U510 with Windows 8. I bought it as a returned machine but the Staples employee didn't know why it had been returned and thought it was just because the buyer didn't like Windows 8. When I first set it up I kept getting an error message that my usb device was not recognized, even though I had never plugged anything in. As I was leaving the country, I dismissed the issue and decided to deal w/ it when I returned to the US, since my other usb drives worked fine.
However, later my integrated webcam stopped working as well. It worked one time when I used Skype but not after that. I checked online forums for possible solutions, and most said I needed to download an updated driver. I didn't think this was the issue b/c when I went to device manager and tried to update my driver for the easycam, it said I already had the most up-to-date driver. I have uninstalled drivers, downloaded and re-installed drivers, and even refreshed my computer, all to no avail.
Here are the error messages I receive:
In device manager>view>show hidden devices>imaging devices>Lenovo EasyCamera, device status says
Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer.
When I try to run the Bison setup: Lenovo EasyCam has not found!
When I try to run the Chicony setup: Setup failed! Please Plugin camera and install driver again!
So, I'm thinking it's not a driver issue, but I'm not a techie and don't know what else it could be. Wondering if the usb problem and webcam problem are connected. Found another forum post that said maybe the webcam is not connected to the motherboard...suggestions?
Thank you in advance for your help.

I am certain it is a hardware issue from the problems youre describing. I would contact Lenovo. They may try to have you purchase their "software" support, but don't let them. I had wifi issues and they tried to make me spend $90 because I was too lazy to figure it out on my own.
Make sure when you're calling support that you tell them that you restored to factory default and before you send your computer in, back up your data. Also tell them that it's a new computer and you do not want to pay for shipping... They will most likely comp you shipping in both directions.

Installed Windows & 32 Bit But Drivers and USB ports NOT WORKING.

I bugh an HP Pavillion TS 14 Notebook that came preinstall with Windows 8.1 64 bit which I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem. None of my network drivers work and the 2 uSB ports where I plug my mouse and other SB hardware in no longer work.
I did a back up of the SW Set up file that has all of the HP dvers for my laptop but both the network and video divers won't install. And When I try to install the drives I get the eror message saying they are not compatible with this version of Windows.
I have loked on the HP website under my laptop model which s as above but HP don't do drivers for Windows 7 32 for my laptop. And I have looked on both the Realteck website for both the Realteck ethnet and Realteck wireless network drivers but none of them work or install on my operating system. The video drivers Intel don't work either. So I am really stuck a I cannot go back to Windows 8.1 as though that 32 bit Windows 7 would work on my laptop but most of my drivers are not compatible with the operating sytem And I don't want to install 64 bit Windows as I like 32 bit.
The drivers that are not working on Windows 7 32 bit are:
Realteck RTL8188EE 802-11b/gn witeless lan
Realteck ethnet die and
Intel High definition graphcs driver
Which don't work at all on Windows 7 32 bit as they are 64 bit only drivers.
So can you please post me a link bth the network and Intel graphics drvers that work with my laptop. As I have tried lots of different Realteck and raphics drivers for Window 7 but NONE of them work on my system. And None of my USB ports are working either. So how do I solve this problem?
This question was solved.
View Solution.

Hi:
Should be no problem to get W7 32 bit to work on that model.
Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
Your model uses the Intel HD graphics driver only.
The first driver you have to install is the Intel chipset installation utility and then reboot.
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
Audio: Accept the agreement. Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

Both internal and USB mics not working

Hi there, all. Long-time lurker, first-time poster. Starting last night, I have been having issues with microphone use on my iBook G4. Neither the internal mic nor my USB headset mic (Altec Lansing AHS302USB) are accepting input.
The internal mic's failure doesn't surprise me, as I have heard about the delicate nature of the wire connecting the internal mic from its position on the display down to the main computer. It's the USB mic that confuses me, since USB mics are what everyone seems to recommend that people use when the internal mic is on the fritz (thanks to other mics not working with Mac due to the line-in thing). Also there is the fact that I have used this headset with this computer for over a year with no significant issues until now, with both mics simultaneously failing.
There doesn't seem to be a problem with the headset's wires; I am still able to hear audio through the headphones quite well, and when I load my audio recording program (Audio In) and Sound Preferences, I can see the occasional blip of sound recognition when I move the USB adapter portion around in the port. These blips even occur when the pink microphone jack and headphones jack are unplugged from the adapter, so this suggests to me that the problem lies not with the wires, but somewhere in the USB adapter, port, or the computer itself.
I'm leaning toward the computer itself, since it just seems odd that both mics would just happen to stop working at the same time. That and the fact that audio output still works through the headset, and the USB ports work fine for other USB devices such as my external drive and iPod.
I have tried restarting, resetting the PRAM, and repairing permissions with Disk Utility. Nothing's working so far.
Does anyone have any idea what could possibly be wrong?
For reference's sake, I took a recording of the sound that results from jiggling the USB headset adapter in the port. It's very quiet, so you may need to turn up the volume a little bit to hear it. Again, these are the ONLY sounds that the mic is able to pick up currently.
http://animeutahime.com/temp/faultymicrecording.mp3
iBook G4 Mac OS X (10.4.10) 768 MB RAM, 37.7 GB hard disk

Just to chime in here - I wonder if it's down to the software: I've recently updated to 10.4.10, and the internal mic seems to have stopped working.
One positive effect of the change to 10.4.10 is that my Griffin iMic no longer flips to 8-bit, 22khz recording when I plug it in.
Having said that, I really like to get my internal mic back up and running again.
iBook Mac OS X (10.4.10) 1.5gb RAM, 60gb hard disk

Toshiba L505D-ES5025 Microphone, Sound , Webcam and Usb ports not working

Title says all, i also dont have any usb port tree in my device manager

For the sound go search in your start menu sound and click manage try the same for mic you may haft to configure it if not go to device drives ( sane for ports) you either haft to enable or ad drives if that does not work shut down your computer we'll starting it up press f8 and and select repair computer if it doesn't work you will haft to repeat the sand process except don't click repair click open the partition and follow the instruction when it ask you put it to out of box state

HPDV6 6c04sa - HP truevision HD camea and usb ports not working

My camera is not working - there appear to be no drivers for it through the website for re-installing, and none in HP recovery and the copies of the original drivers loaded on the computer. Cyerlink you cam does not install a driver.
How am I expected to be able to re-instal a driver when there is not driver for it?
Secondly, there is no information on the camera provided in the laptop.
USB ports on the left hand side are not working.
Finally - there is a mysterious Q drive which also appears not to function.
Running Windows 7 64 bit.

bump
Is the HP TrueVision HD internal webcam usb based?

Thinkpad L412 Integrated Camera and USB Controller Not working

My Integrated Camera has disappeared from the device manager listing, and "USB not connected". Further, the USB Controller has an "Unknown Device" with no driver. None of my USB ports work beyond power. I cannot find any drivers or other way to resolve. Any suggestions?
Thanks in advance for assistance!!!

Grab the latest chipset driver package from Intel's download center, and run the setup EXE with the -overall switch.
https://www.raymond.cc/blog/the-proper-way-to-fully-install-intel-chipset-driver/
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Headphone jack and USB's not working.

Hi
I bought a 17.3" Envy 2 months ago. Up until today I have not had to use the headphone jack or either of the USB's on the right hand side of the laptop, however when i've come to use my turtle beaches today, they do not work.
The USB slots also do not work with my mouse which works on the two slots on the left hand side of the laptop, and my earphones or sennheiser headphones do not work in the jack either.
What can you advise?
Thanks
Tom

Hi @Tom30191
Welcome to the HP Support Forums!
I understand that you are having trouble with some usb ports and your audio jack. I am happy to help with this.
I would start by refreshing/reinstalling the chipset drivers, for your notebook, and you may also want to try updating the BIOS from the same page, and see if it helps.
HP ENVY 17-j184na Notebook PC (ENERGY STAR) - Software & Drivers
Give it a try and let me know if it makes any difference.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Wifi sudden disconnection and lock button not working properly on my iphone 4s....... It is under warranty

When using wifi on my iphone,sometimes it disconnects automatically...... And my lock button is not working properly.....
What should i do, my iphone is under warranty....

The Sleep/Wake button is a hardware issue and that's covered by the warranty. I would take it to the Apple Store and see what they can do.
Hope that helps

Usb tethering not working in iphone5 after ios8 update

Hello,
I have upgraded my iPhone 5 to iOS 8. My personal hotspot is not working anymore with my laptop. There is a personal hotspot section under cellular in settings, however i am not sure what to do!
Kindly help on the same

Hi Pathikrit B,
Welcome to the Apple Support Communities!
Please review the following article for information on how to set up your Personal Hotspot.
iOS: Understanding Personal Hotspot
Have a great day,
Joe

Esata Port and USB Ports Not working

My USB ports have not been working for a long time. They will charge my phone, but windows doesnt pick them up nor any other device I connect via any of the USB ports. I recently took my computer into a shop to have them fix a wire that had come undone
and asked them to look at my USB ports and figure out why they werent working. When I got it back they told me the USB ports were connected to the motherboard and to get them to work they would need to replace the motherboard. They said however that the Esata
port worked and I asked them if I could use that to connect my USB from my iPhone in order to connect to itunes. They said with an adapter it should work. So I bought the adapter and of course when I connect the USB in to it, the computer wont recognize the
device. I even tried connecting the USB directly into the Esata port and still nothing, but it will charge the phone, just not recognize it.
Any advice would be much appreciated.
The computer is a Dell Inspiron N7010 running Windows 7

Hi,
Obviously, you can't connect USB directly into Esata port, for they are not compatible.
Attempt to install your phone usb driver and then check if it works.
If not, it should be related to your adater, not all adapters support data transfer.
Andy Altmann
TechNet Community Support

Wifi hot spot and USB tethering not working

Similar Messages

Maybe you are looking for