Wifi hotspot stoped working
When i am using wifi hotspot in my xperia m2 its good working. but few minutes later automacily stoped. please give me correct solution. version 4.4.4
Do you have stamina enabled?
Similar Messages
-
Iphone 5c wifi hotspot not working before ios 8 update after it.
I going through **** lot of issues, after getting an iphone(5c) a piece of ****,straight out of the box bowl full of ****.
1.Wifi Hotspot Problem
2.Overheating problem remains, no effect of ios updates.
3.Itunes ***** in india,update download fails numerous times before processing of file.I Have a similar problem occurred on my iPhone 5 , after install iOS 8 I can hear by ear speaker but the mic didn't work also volume bottoms didon't work,
my ear speaker still new in a good condition. -
Xperia Neo ICS update wifi hotspot not working?
Hi
I updated GB to ICS yesterday but now I am not able to connect to internet yhrough wifi hotspot. Please help USB tether is fineSorry to hear about your phones issues!
Check the thread on the link below, it might help out.
http://talk.sonymobile.com/message/203949#203949
What do you think about this forum? Let us know by doing this short survey. -
Weak WiFi hotspots at work - is there a signal booster available?
My company has both private and public WiFi connections available and my office is in an area which receives a low signal, causing me (and my co-workers) to loose connection regularly.
My work is software application support for hundreds of clients and soon the company will launch the software to be available for mobile products (iPhone and iPads).
The company is definately NOT going to upgrade or install a hotspot directly in my area so I am looking for other options. Are there tools, products, antenna, equipment available that would help my iPad get more regular, improved reception??
I heard that there is something out there for approx $100 which can be placed at or under a desk, but I have come up empty so far in my searchmy laptop is connected to a dock and I do get a wireless/ WiFi signal. But docks are new to me, so I'll have to look and see what it's all about.... I believe there IS an extra Ethernet port. If there is NO extra port, is it possible to use something like a splitter on the port my dock is connected to?
Guess that's a question for my deskside support folks
time for work.... I will find out what I haave within the hour -
My Wifi has stoped working on my iphone4 after 4.3.3 update
Can it be fixed or will this Iphone have to go back to apple? I'm not very good with the computer talk so simple answers please,
TaI think I have the answer... This just worked for me.
1. Turn off your wireless router
2. Turn your wireless router back on
3. Go to back to your wifi settings on your iphone
4. Reconnect / login to your wifi connect
My wifi is back up and running on my phone.... too weird to believe!
Good Luck! -
Looking for a WiFi printer that will work with my Nexus WiFi hotspot
On a recommendation, we have bought an Epson NX530 WiFi-enabled printer. It does not work with the WiFi hotspot feature of my Galaxy Nexus. The support tech at Epson suggested that we get a WiFi router rather than trying to use the Galaxy Nexus. I told her that I would rather trash the NX530 and get a printer that would work with my phone.
So we have 3 questions:
1) does anyone know how to make an Epson NX530 work via the Galaxy Nexus hotspot?
2) does anyone know of a different WiFi enabled printer that works with the Galaxy Nexus?
3) does anyone know if the Galaxy Nexus is inherently unable to work with any WiFi printer?
Thanks,
CraigThis website should be able to assist you. http://www.galaxynexusforum.com/forum/galaxy-nexus-help/8520-wifi-printing.html I use an app called Printhand from the Google Play Store for my Android tablet and smart phones. I have a Canon Pixima 3220 that functions great. I also have a higher end HP Envy D410a that also works great with printhand. The Canon is cheap at BJ's at $40 when I bought it. The HP is about $269 at Staples and other outlets. Good Luck
-
My wifi hotspot is not working on my Iphone4S
Thanks deggie for replyng.
Actually on my phone personal Hostpot won't turn on. it say contact your service provider. But I could connect to other phone's wifi easily. On of my friends has the same iphone but he could easily turn on personal hotspot and he is using the same carrier "vodafone". Also he has not contacted to vodafone to unable this setting.
only difference is that he purcahsed iphone 2 months back and mine is 10 months old. but its the same Iphone 4S -
How can I tether via USB my iPhone 4S with iOS 7.1.1 to my MacBook with Snow Leopard 10.6.8 and iTunes 11.2.2 ?? Please note that at the same time Personal Hotspot via both WiFi and Bluetooth works perfectly!
Hello, lustige luka.
Thank you for visiting Apple Support Communities.
The Personal Hotspot feature using USB should be as simple as connecting the device to your Mac via the USB cable when Hotspot is enabled. Here is some more information regarding this feature and an article that will provide some troubleshooting steps if you are experiencing an issue.
iOS: Understanding Personal Hotspot
http://support.apple.com/kb/ht4517
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/TS2756
Cheers,
Jason H. -
Dear All,
I have update ios5.1 last week on my iphone4 16GB. Now Wifi is not working and Wifi Hotspot not displaying in setting menu.
Pls help. What can i do now
SenthilCan you tap the little "i" in the blue circle and "Forget this Network"
-
HT204023 which works better - bluetooth or wifi hotspot on iPhone 5?
which works better - bluetooth or wifi hotspot on iPhone 5?
The problem magically solved itself by an accidental drop of my phone on the floor. Maybe you should not try this at home
-
Lenovo g570 wifi hotspot sharing in windows 8 not working below the log
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\Windows\system32>netsh wlan set hostednetwork mode=allow ssid=name wifi Hotsp
ot key=yourpassword
One or more parameters for the command are not correct or missing.
Usage: set hostednetwork [mode=]allow|disallow [ssid=]<ssid>
[key=]<passphrase> [keyUsage=]persistent|temporary
Parameters:
Tag Value
mode Specifies whether to allow or disallow the hosted network.
ssid SSID of the hosted network.
key The user security key used by the hosted network.
keyUsage Specifies whether the user security key is persistent or
temporary.
Remarks:
This command changes the properties of hosted network, including: SSID
of the hosted network, allow or disallow the hosted network in the system,
and a user security key that is used by the hosted network.
The user security key should be a string with 8 to 63 ASCII characters,
eg. a passphrase, or 64 hexadecimal digits which represent 32 binary
bytes.
If keyUsage is specified as persistent, the security key will be saved
and used when the hosted network is started again in future. Otherwise
it will be used only when the current or next time the hosted network
is started. Once the hosted network is stopped, the temporary security
key will be deleted from the system. If keyUsage is not specified, it
is persistent by default.
This command requires administrator privileges to allow or disallow the
hosted network.
Examples:
set hostednetwork mode=allow
set hostednetwork ssid=ssid1
set hostednetwork key=passphrase keyUsage=persistent
C:\Windows\system32>
C:\Windows\system32>netsh wlan set hostednetwork mode=allow
The hosted network mode has been set to allow.
C:\Windows\system32>ssid=name wifi Hotspot key=yourpassword
'ssid' is not recognized as an internal or external command,
operable program or batch file.
C:\Windows\system32>netsh wlan set hostednetwork mode=allow ssid=name wifi Hotsp
ot key=yourpassword
One or more parameters for the command are not correct or missing.
Usage: set hostednetwork [mode=]allow|disallow [ssid=]<ssid>
[key=]<passphrase> [keyUsage=]persistent|temporary
Parameters:
Tag Value
mode Specifies whether to allow or disallow the hosted network.
ssid SSID of the hosted network.
key The user security key used by the hosted network.
keyUsage Specifies whether the user security key is persistent or
temporary.
Remarks:
This command changes the properties of hosted network, including: SSID
of the hosted network, allow or disallow the hosted network in the system,
and a user security key that is used by the hosted network.
The user security key should be a string with 8 to 63 ASCII characters,
eg. a passphrase, or 64 hexadecimal digits which represent 32 binary
bytes.
If keyUsage is specified as persistent, the security key will be saved
and used when the hosted network is started again in future. Otherwise
it will be used only when the current or next time the hosted network
is started. Once the hosted network is stopped, the temporary security
key will be deleted from the system. If keyUsage is not specified, it
is persistent by default.
This command requires administrator privileges to allow or disallow the
hosted network.
Examples:
set hostednetwork mode=allow
set hostednetwork ssid=ssid1
set hostednetwork key=passphrase keyUsage=persistent
C:\Windows\system32>
C:\Windows\system32>netsh wlan show drivers
Interface name: Wi-Fi
Driver : Qualcomm Atheros AR9285 Wireless Network Adapter
Vendor : Qualcomm Atheros Communications Inc.
Provider : Microsoft
Date : 7/3/2012
Version : 3.0.0.130
INF file : C:\Windows\INF\netathrx.inf
Files : 2 total
C:\Windows\system32\DRIVERS\athrx.sys
C:\Windows\system32\drivers\vwifibus.sys
Type : Native Wi-Fi Driver
Radio types supported : 802.11b 802.11g 802.11n
FIPS 140-2 mode supported : Yes
802.11w Management Frame Protection supported : Yes
Hosted network supported : Yes
Authentication and cipher supported in infrastructure mode:
Open None
Open WEP-40bit
Open WEP-104bit
Open WEP
WPA-Enterprise TKIP
WPA-Personal TKIP
WPA2-Enterprise TKIP
WPA2-Personal TKIP
Vendor defined TKIP
WPA2-Enterprise Vendor defined
Vendor defined Vendor defined
WPA-Enterprise CCMP
WPA-Personal CCMP
WPA2-Enterprise CCMP
Vendor defined CCMP
WPA2-Enterprise Vendor defined
Vendor defined Vendor defined
WPA2-Personal CCMP
Vendor defined Vendor defined
Authentication and cipher supported in ad-hoc mode:
Open None
Open WEP-40bit
Open WEP-104bit
Open WEP
WPA2-Personal CCMP
Vendor defined Vendor defined
Interface name: Wi-Fi 6
Driver : Belkin USB Wireless Adaptor
Vendor : Belkin International, Inc.
Provider : Microsoft
Date : 6/1/2011
Version : 1086.41.214.2012
INF file : C:\Windows\INF\net8192su64.inf
Files : 2 total
C:\Windows\system32\DRIVERS\RTL8192su.sys
C:\Windows\system32\drivers\vwifibus.sys
Type : Native Wi-Fi Driver
Radio types supported : 802.11n 802.11g 802.11b
FIPS 140-2 mode supported : No
802.11w Management Frame Protection supported : No
Hosted network supported : Yes
Authentication and cipher supported in infrastructure mode:
Open None
WPA2-Personal CCMP
Open WEP-40bit
Open WEP-104bit
Open WEP
WPA-Enterprise TKIP
WPA-Personal TKIP
WPA2-Enterprise TKIP
WPA2-Personal TKIP
WPA-Enterprise CCMP
WPA-Personal CCMP
WPA2-Enterprise CCMP
Vendor defined TKIP
Vendor defined CCMP
Authentication and cipher supported in ad-hoc mode:
Open None
Open WEP-40bit
Open WEP-104bit
Open WEP
WPA2-Personal CCMP
C:\Windows\system32>Type netsh wlan set hostednetwork mode=allow ssid=Hotspotnam
e key=password
The system cannot find the file specified.
Error occurred while processing: netsh.
The system cannot find the file specified.
Error occurred while processing: wlan.
The system cannot find the file specified.
Error occurred while processing: set.
The system cannot find the file specified.
Error occurred while processing: hostednetwork.
The system cannot find the file specified.
Error occurred while processing: mode.
The system cannot find the file specified.
Error occurred while processing: allow.
The system cannot find the file specified.
Error occurred while processing: ssid.
The system cannot find the file specified.
Error occurred while processing: Hotspotname.
The system cannot find the file specified.
Error occurred while processing: key.
The system cannot find the file specified.
Error occurred while processing: password.
C:\Windows\system32>wlan set hostednetwork mode=allow ssid=Hotspotname key=passw
ord
'wlan' is not recognized as an internal or external command,
operable program or batch file.
C:\Windows\system32>netsh wlan set hostednetwork mode=allow ssid=Hotspotname key
=password
The hosted network mode has been set to allow.
The SSID of the hosted network has been successfully changed.
The user key passphrase of the hosted network has been successfully changed.
C:\Windows\system32>netsh wlan start hostednetwork
The hosted network couldn't be started.
A device attached to the system is not functioning.
C:\Windows\system32>
Solved!
Go to Solution.hi airtet,
Seing that you have an both the Qualcomm Atheros AR9285 Wireless Network Adapter and the Belkin USB Wireless Adaptor, have you tried disabling one or the other and run Connectify?
You may also want to check this discussion for more info and troubleshooting.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
I need help to figure this out b4 I leave on Monday.
Turning your iPad into a WiFi Hotspot, is only necessary if you are needing to share WiFi with other devices, if your iPad is already connected to WiFi or Cellular etc..
Ask the Hotel where you are staying for their WiFi information for Guests and connect to their WiFi Network in the list that shows up in iPads WiFi Settings.
Joining and troubleshooting Wi-Fi networks
http://www.apple.com/support/ipad/assistant/wifi/ -
Instant Hotspot not working on MacBook Pro Early 2011?
Hi and tnxs for reading.
I have a MacBook Pro Early 2011, and I cannot figure out how to use Instant Hotspot.
It is regularly working as standard hotspot by activating it on my iPhone and checking the iPhone WiFi Hotspot from WiFi menu, but otherwise is not available after the iPhone goes on stby...exactly as before.
Is this a limitation like the major part of Continuity?
Tnxsnot working for me either and i have iphone6 and macbook mid 2014 so it cant be a hardware problem for me at least....
-
How can i use "phone relay" on a iPad mini over iPhone created wifi hotspot?
How can i use "phone relay" on a iPad mini over iPhone created wifi hotspot?
It works nicely over home wifi, but for example, i am sitting in my car, phone is in my pocket and I'm using the iPad, call comes in and i don't want to start digging for my phone.
Is there any way?
devices:
iPad mini cellular (no SIM card at the moment)
iPhone 5S
Thanks!well yes, but it basically makes wifi for the other devices, it basically mimics wifi.
as i get from your answer, it is not possible?
it would be common sense to make it work this way also. directly from device to device. no bounce between WiFi router
Then again, common sense is not that common these days... -
I am going to a lake cabin in Northern Minnesota for a week and need to get wifi for my Mac. Is there any way to create a wifi hotspot using my Ipad so that I have internet service for my laptop?
No, iPad can become a hot spot, but if you have an iPhone, it can tether if you have a data plan that incudes the tethering option. With AT&T for example, you can add tethering for $20 month or for $45/month, you receive tethering and 4GB of data per month. If you have the unlimited data plan from AT&T you'll unfortunately have to give it up if you want to tether. You can also go to almost any carrier and purchase a MiFi unit which may work for you. Whether iw will work in Northern Minnesota is something only your carrier could answer.
Maybe you are looking for
-
Error while binding node attribute to a UI element (table)
Hi When I bind a node attribute to a table in a View... It gives a chain of exceptions..starting with java.lang.NoClassDefFoundError: com/sap/tc/webdynpro/clientserver/uielib/standard/api/IWDAbstractTableColumn at java.lang.Class.getDeclaredCons
-
Starting Up: Folder with Question Mark Icon
I do not know when this problem began whereas I do not restart my Mac that often. But the problem is that whenever I boot up my MacPro now I get this icon that is a folder with a question mark inside of it, and it keeps blinking. The weird thing is,
-
Apple's annoying ignorance of Apple apps in subfolders
Why is it the case that OS X 10.10 (and all versions before) keep ignoring that I moved the Apple application ›iTunes‹ from the first level of my application folder into one of the subfolders (which helps me and my 500 applications to stay organized)
-
OCTROI DURING STOCK TRANSPORT ORDER
Hi, We have the following scenario. Octroi has to be paid during goods transfer from one plant to other. I'll be having an octroi agent who'll be paying the octroi for on my behalf. and the actroi agent will get this amount reimbursed once in a month
-
Mac Photoshop layers not visible to Windows user
I'm using Photoshop CS6 Extended on a Mac. My client requested a PSD file saved with layers, which I provided. Her web developer is on Windows CS6 and is unable to see the layers in the file. Do you know why the layers are not visible to the Windows