Wifi idle 1min doesnt work after that

hey all,
i have this problem ever since i bought this phone.
when ever im browsing over wifi and stops browsing for 1min and if i again start browsing it jst doesn't work and shows me that it is trying to load the page. however this thing never happens on my laptop.
even if i use my cellular net to browse and left it idle for 30min even though it starts browsing whenever i want to BUT WHY THIS PROBLEM IS ONLY WITH MY PHONE'S WIFI??
currently i have to disconnect my wifi connection and then reconnect to make it in working condition but this is not right.... if you guys knw the solution let me knw ..
P.S.
im not using any power saver options. the phone is at high performence from all aspects

Wi-Fi Problems in OS X Yosemite
Wi-Fi Problems in OS X Yosemite (2)
Wireless Diagnostics
Also try turning off Bluetooth.
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)

Similar Messages

Imessaging doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

imessaging on ipod touch doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

Short of a reset to factory settings I've found making sure iMessaging is not left minimised helps. It doesn't seem to keep its connection. So, by closing after each use this helps. I've been doing this since I logged out of iMessaging at least 1/2 doz times and even changed my apple id pw as this had ceased to be recognised. I get fewer send failures now and don't have an inactive send button so much. Having said this its all a bit of a work around as iMessaging isn't behaving as it once did. If over time not resolved will do factory reset. All the best.

My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.

My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Why my hp mini 5101 the "7" key doesnt work after upgraded the bios?

why my hp mini 5101 the "7" key doesnt work after upgraded the bios?
The current bios version is F.07

korpx,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Adressbook doesnt work after update to 10.7.3 PB says your adressbook is 5.0.3. Can anyone please help?

Adressbook doesnt work after update from Snow Lepard to Lion 10.7.3 PB says your adressbook is 5.0.3.
PB says You have adressbook 10.5.3, yes, but now?
Can anyone please help?

Use the copy of AddressBook that is in your Applications folder, not the one on your Dock that's linked to a transplanted copy of the prevoius AddressBook App.

The front camera of my iPad 3 doesnt work after updated ios7

The front camera of my iPad 3 doesnt work after updated ios7

Have you tried closing the Camera app completely and seeing if it works when you re-open the app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If neither fix it then you could try contacting Apple.

I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.

BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton

I have an iPod 4th gen and the bottom part of it doesn't work where the space, .?123, and the go buttons are I droped it yesterday but it started doing this an hour ago I can slide to get in but it's stops working after that someone tell me how I fix this

I have an iPod 4th gen and the bottom part of it doesn't work where the space, .?123, and the go buttons are not working I droped it yesterday but it started doing this an hour ago I can slide to get in but it's stops working after that someone tell me how I fix this

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My Ipod classic stopped suddenly while playing on the dock. On checking it said connect to iTunes to restore and the battery had also exhausted itself. On connecting to iTunes it kept displaying the message Do Not Disconnect. It never worked after that.

My Ipod classic stopped suddenly while playing on the dock. On checking it said connect to iTunes to restore and the battery had also exhausted itself. On connecting to iTunes it kept displaying the message Do Not Disconnect but showed the battery getting charged. Sometime later it said OK TO DISCONNECT. It never worked after that. Please help /guide to restore...

Hello Harrywahi,
Sorry to hear about the trouble you are having with your unresponsive iPod classic. I found a resource that I think would help in a situation like this.
I recommend following the steps in this troubleshooting assistant:
iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Ios 7, camera doesnt work after updating, iphone4

My iphone 4 camera doesnt work after updating on ios 7

completely erease the ipad and reinstall the OS.
Go to settings>general>reset>erease all content and settings. Wait for the ipad to finish then see if it works.

Okay, so my computer was having some problems. I recently did a restore (the one where you set back time to an earlier date) itunes didnt work after that... i tried uninstalling it but that didnt work. I then downloaded a third party app to...

completely remove itunes... i re downloaded after that and itunes is up and running (currently listening to music) however i now have no way to sync my iphone to the pc... i first tried using wifi sync, but the phone said the "pc was unavailble" and the sync button was greyed out. i then plugged the iphone directly into the computer via a apple usb 30 pin connector. Nothing. The computer recognizes the iphone in "my computer" and i can access my photos that way. but itunes doesnt recognize it at all. there is currently no way for me to sync my iphone. I have already "reset" my iphone... (holding down home button and lock button until it shuts off... and still until it shows a apple icon and then releasing after the apple icon goes away). i then turn it back on and plug it into the computer. itunes still doesnt find it. what do i do? i really dont want to unistall it again.. its a huge hassle and take forever.

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Wifi and bluetooth doesnt work anymore - Help

Earlier today I was able connect my playbook to my home wifi network and blackberry tour through the bridge platform. Now I can no longer get bluetooth enabled on my tablet and it is unable to pick up not only my personal wifi network but others as well.
I have a Linksys router with 2.4Ghz and 5Ghz Antenna, my playbook has always been connected to the 2.4Ghz band before. For some reason, it wouldtnt connect to the 5Ghz anyway. It wasnt a concern until tonight..
Since I could not connect to Wifi anymore and couldnt bring bluetooth back on either, I tried multiple restart, hard reset and finally a security wipe, hoping it would bring me back to factory default at least.
Now im back at the initial setup, but I still cant connect to my wifi. The 2.4ghz wifi wont even show in the available network, and even though I can see the 5ghz network, it wont connect.
Connecting the playbook to desktop software at this point doesnt seem to work, it tells "Setup hasnt been completed for the connected Playbook. Disconnect your device and finish the setup" bla bla bla.
Any other way to actually reset that thing ?

My bluetooth was OFF and so was my Wifi.
When I went into Bridge setup on the playbook, it said something like "you have to enable bluetooth to get bridge working" but bluetooth wouldnt come back ON anyway... so I dont know what crashed bluetooth + wifi...
This morning I updated the playbook with Desktop Software, but Im still stuck in setup trying to connect a Wifi. It will shows an available network but when I try to connect it fails and then the network is just not available anymore. Im sitting 2 feet from the router.. cant be because there is a bad signal. The wifi network is also working for anything else trying to connect to it.
I wish there was a way to get pass that setup without a wifi connection.

Itunes wifi sync does not work after upgrade to OS X Yosemite

Hi,
After upgrade to OS X Yosemite itunes wifi sync with my ipad and iphone stopped working. After attaching the iphone and ipad with a cable, I could sync, but as soon as the cable was removed, the ipad and iphone disappeared again from itunes. And wifi did still nok work.

Apparently something is not being saved somewhere and this technique forces the save. Below is a C&P from another poster describing the technique on a different thread. It's been working for him for some fifteen hours. I tried it and it's been working but it's been only ten minutes. My gut feel is that quitting and relaunching iTunes are critical steps.
With the device connected via cable, click on its icon
Uncheck WiFi syncing
Click Apply
Quit iTunes
Launch iTunes
Check WiFi syncing
Click Apply

Hifi mode doesnt work after xp reboot

To get the hifi mode to work, i have to remove the power plug at the back and put it in again, after restarting windows xp. Then it works. I hate doing this
ps even the hifi button doesnt work!
any fixes for this would be appreciated!
thanks
latest updates etc installed using msi update thingy
mega 865
tdk 4x dvdrw
512 ram
ati 9800 se 128

The Hi-Fi mode switch can not be used when the computer is turned on BUT if using the MMC III you will notice that the HI-FI will light up. Can you give us some more information on this ie does it happen if you start up XP and do not use the MMCIII, what happens if you shut your computer down by holding in the PC button? Have you tried this with your CD and AGP cards installed, has this always happened, Have you tried a boot disk to see if the operating system is upseting the LCD. If it works fine off a boot up disk then I would do a fresh install of your XP.

Drag and move doesnt work after 5 mintues

Hi,
If i start my system up, i can move a window by dragging the titlebar, but then after about 5 minutes it doesnt work anymore. Also i cant copy text by clicking left and moving the cursor. I have a Lenovo T410 and i am using the touchpad. I just freshly configured my system on a new ssd from vertex. Before i didnt have this issue and i copied my old xorg files to the new system but that didnt work either. I have no idea where the problem lies.
Thanks for your help!
Cheers Felix

Hi Igoksadze,
Welcome to Lenovo Community!
As per the query we understood that you are facing the issue with the system if the system wakes up the keyboard and mouse not working.
As per the query would like to give some trouble shooting steps:
Start>C Panel> System & Security> Power Options> Change Plan settings>Change adv power settings> (and look for the sleep tab / settings along with USB, etc).
Check if the USB port is disabled or enabled.
Also check in BIOS for the wake up power options.
Hope this helps! Do post us back for further queries.
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Wifi idle 1min doesnt work after that

Similar Messages

Maybe you are looking for