WiFi in Asia works on iPhone but not Macbook Pro

I am currently traveling around Asia and I have my Macbook Pro and iPhone with me.  I have had no problems connecting to WiFi networks with my iPhone (currently typing this message with it on my hotel's WiFi).  However, my Macbook Pro has had endless issues.  Sometime it works, but often it doesn't.  The most common issue is that it gets a self assigned IP address and can't connect to the internet.  It can usually find and connect to the WiFi network, but from there things get dodgy.  As I said, it sometimes works fine.  I would say it works on 1 out of every 3 networks that I try. 
So far I have tried the following:
Renewing DHCP Lease (without client ID and with made up client ID)
Disabling firewall.
Turning off wifi and them back on.
Restarting computer.
Deleting WiFi service and recreating.
Creating new "location".
Repairing permissions.
Using different login account.
Manually entering TCP/IP settings copied from iPhone.
"Forgetting network" and rejoining.
None of the above has helped, except that one time renewing DHCP lease with a made up client ID did the trick.
I have the summer 2012 MacBook Pro 13" with OS 10.7.5 installed.
Any help would be very appreciated.  :)
-Shawn

It doesn't seem like anybody is going to respond to this thread, but I guess I will keep updating it just in case (and perhaps if I ever find a solution it will be helpful to others).
Since my last post I have been to about 12 hotels in both Thailand and Cambodia.  This issue has continued with some variations:
* At 3 of the hotels the wifi on my MacBook Pro actually worked!  It seemed to work ok, with minimal speed issues.
* At 6 of the hotels the wifi did not work on my MacBook Pro, but worked fine on my iPhone.
* At 3 of the hotels the wifi worked on my MacBook Pro but was PAINFULLY slow (to point where I couldn't upload photos, could barely check facebook, etc).  In fact, it was so slow that I basically gave up using the internet with my MacBook Pro and used my iPhone instead (which had normal speeds).
I have continued to search the internet for solutions and nothing has helped yet.  It seems like this is a common issue with newer MacBook Pros, especially with OS Lion.
I have also concluded that this isn't necessarily an Asia specific issue.  It seems like an issue with my MacBook Pro and using various WiFi routers with various setups.  Some work, but most do not.  Unfortunately I do not have access to any of the routers that I am using, so changing router setup is not an option.
-Shawn-

Similar Messages

  • Netflix works on iphone but not MacBook Pro?

    I'm a new Apple Macbook pro guy.  Switched from Window PCs after getting my iphone.  I downloaded the Netflix for iphone - works great, but Netflix on my MAC wants Silverlight.  Is that secure?  I heard you also have to enable JavaScripts - Java is secure, but JavaScripts are not?
    Old guy needs some help :-)

    It doesn't seem like anybody is going to respond to this thread, but I guess I will keep updating it just in case (and perhaps if I ever find a solution it will be helpful to others).
    Since my last post I have been to about 12 hotels in both Thailand and Cambodia.  This issue has continued with some variations:
    * At 3 of the hotels the wifi on my MacBook Pro actually worked!  It seemed to work ok, with minimal speed issues.
    * At 6 of the hotels the wifi did not work on my MacBook Pro, but worked fine on my iPhone.
    * At 3 of the hotels the wifi worked on my MacBook Pro but was PAINFULLY slow (to point where I couldn't upload photos, could barely check facebook, etc).  In fact, it was so slow that I basically gave up using the internet with my MacBook Pro and used my iPhone instead (which had normal speeds).
    I have continued to search the internet for solutions and nothing has helped yet.  It seems like this is a common issue with newer MacBook Pros, especially with OS Lion.
    I have also concluded that this isn't necessarily an Asia specific issue.  It seems like an issue with my MacBook Pro and using various WiFi routers with various setups.  Some work, but most do not.  Unfortunately I do not have access to any of the routers that I am using, so changing router setup is not an option.
    -Shawn-

  • Just bought an Epson 2540 Printer, connects with iPhone but not Macbook Pro

    I am able to print from my iPhone but not my Macbook Pro. Wireless test page worked fine. Turned on Sharing option, turned off firewall, and still does not connect. This is very frustrating, please help

    You may have to visit the Epson website and make sure your printer has drivers updated for Mavericks:
    http://www.epson.com/cgi-bin/Store/support/SupportMavericks.jsp?BV_UseBVCookie=y es
    Updating the drivers through this link should fix your issue. Post if there's any problem.

  • Wifi works on iPhone but not MacBook with more bars!

    so, sitting in the same spot my MacBook Pro has 4/4 bars but the wifi only works for five seconds at a time (not literally but it feels like it), then I have to disconnect and reconnect. My iPhone has 2/3-3/3 bars and the wifi works great! why is this? Shouldn't the MacBook have better reception as its bigger/has more power? Why does it show more bars than the iPhone but hAbe a worse connection?

    Start up in Recovery mode. In the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. While in Recovery, you'll have no access to your saved bookmarks or passwords, so make a note of those before you begin, if they're needed for the test.
    Test. After testing, restart as usual and post the results.

  • FaceTime works on iPhone but not macbook..? HEEELP.

    Facetime makes/recieves calls as per usual with iphone, but Macbook pro is unsuccessful- says 'connecting' and rings without ever getting through/does not recieve incoming facetime from other devices.

    Hello emilia_,
    Thank you for the details of the issue you are experiencing with FaceTime.  It sounds like you have isolated the issue to your MacBook Pro. 
    You may be experiencing this issue due to an expired certificate that can be updated by running the software updates on your MacBook Pro.  I recommend reviewing the following article:
    Unable to make or receive FaceTime calls after April 16, 2014
    http://support.apple.com/kb/TS5419
    If your software is up to date, I recommend continuing to troubleshoot with the steps in the following article:
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/TS4185
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Tethering working on MacPro but NOT Macbook Pro

    Having a problem with tethering when using it with my laptop. Macbook Pro (6.1), Snow Leopard 10.6.6 and Aperture 3.1.1.
    My MacPro is working without any problem. (Snow Leopard 10.6.6 and Aperture 3.1.1)
    I have tried both my cameras Canon 5Dmk2 and Canon 20D. Both cameras are recognized in both Macbook Pro and MacPro but only on the MacPro the images will show up. In my Macbook Pro I can press capture and both cameras react but then nothing happens.
    Strange it works on one computer but not the other one.
    Any suggestions?

    You're right it is strange. As it works on one system and not the other with the exact same camera and cable and the fact that you hear the shutter go off even on the system where the images don't show up would seem to indicate some difference in the configuration of Aperture on the MBP.
    Do the images ever show up? If you go to the Photos icon and search you're complete library do they appear anywhere? There isn't a filter set on the project your importing into by any chance?
    I would make a new empty library and try using that to see if it makes any difference. You could also move the com.apple.Aperture.plist file from your Library/Preferences folder to the desktop, restart Aperture and see if that makes any difference.
    regards

  • Mail received on iPhone but not Macbook Pro

    I use godaddy as my domain host. Just today I noticed that when I click the button to get new messages in Mail, the activity light indicates that messages are being loaded, but nothing actually comes in.
    All incoming emails are received on my iPhone.
    I can send mail from the account.

    After opening several service tickets with Godaddy, this issue was resolved by an account reset on their side.

  • IMessage working on iPhone but not on MacBook Pro or iPad Air

    I Am getting increasingly frustrated that iMessage is working on my iPhone but not on iPad or MacBook Pro.  I have tried settings system preferences, taking jabber off etc but still no joy. It's been two weeks now, can anybody help me please

    HI,
    In System Preferences > Internet Accounts  you can enable some email type addresses (they may or may not be actual email addresses) to be able to join various services.
    Therefore a Google ID  can be activated  for Messages as Google allow Google Mail IDs to use their GoogleTalk Service which in turn  happens to be a Google Server.
    At Facebook (if you have an account there) you can enable Chat which gives you a Facebook Chat ID  which also runs off a Jabber server (the ID is similar to your regular ID  but has chat in the name and does not work with the Mail App)
    Apple Issued IDs (@mac.com @me.com and @icloud.com ending IDs) will work as AIM valid Screen Names  in Messages until the 30th June at least (Then @mac.com and @me.com names will stop).
    The iOS version of Messages will send either iMessages  to Apple IDs and iPhone Numbers or in some cases will send SMS to other phones including iPhones that may not have enough service coverage to do iMessaging.
    Of course people may use their Google ID as their Apple ID and use it in the Messages app on the Mac which in turn may mean it is the same on the iOS device.
    The same can be done with  Yahoo ID.
    This means the email IDs from both those services could be used as a Messages account anyway, the iMessages ID as the Apple ID and be active for Mail in Internet Accounts.
    7:58 pm      Friday; June 20, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • I have air printer that works on iPhones but not iPad 2

    I have air printer that works with both iPhones but not with iPad2

    Just to build on red_menace's answer a bit...
    set MyText to do shell script "ps -A | grep '[M]ac VNC 2.1.app' | awk '{print $5}'"
    log "MyText=" & MyText
    set content of text field "Dir" of front window to MyText
    The log command will write the results of the "do shell script" to Xcode's run log window. If you see the correct output there then you know that part is working correctly and the problem is in the way you're trying to insert the string into the text field. Maybe "Dir" doesn't match the name you've given your text field in IB? Or maybe your text field is contained within another view, such as an NSBox or an NSTabView?
    Also, I guess "of front window" should work in AppleScript Studio but I always give my windows AppleScript names in IB and then explicitly specify the window in my scripts. Like this:
    set content of text field "Dir" of window "MyWindow" to MyText
    Steve

  • I've updated one of my contacts and the entry is corrected on my iMac and my iPhone, but not MacBook.  Why not?

    I've updated one of my contacts (to correct their email address) and the correction was made on my iMac (where I made the correction) and my iPhone, but not on my MacBook.  All three devices are on the "cloud"...

    but not on my MacBook.  All three devices are on the "cloud"...
    On the Macbook switch Contacts off then back on in System Preferences > iCloud then restart the Mac.

  • Music works on iPhone but not on iTunes

    A really good chunk of my music doesn't work on iTunes anymore - I'll try to play it but get the message that iTunes can't find the file. It definitely still works on my iPhone, but I'm afraid to sync because I'm worried that what music does work on the iPhone will stop working when it syncs with iTunes.
    What can I do to get the music that works on my phone back onto iTunes? I probably haven't synced the two since maybe the holiday season; I don't remember how long this has been happening, but it's not new.
    Thank you in advance!

    I figured out how to remedy this last night. I had to pull my music off of my iPhone since it was no longer on my hard drive -- I used a free program called [Senuti|http://www.fadingred.org/senuti> to transfer the music (note: you have to download the Beta, which is linked at the bottom of the page, for it to work with an iPhone).
    The program's website has instructions on how to do the transfer without your phone syncing to your computer (which might delete the music from your phone that's missing in iTunes).
    Senuti works by figuring out which music is already on your computer, and copying any music that isn't already there. The problem with this is that all of your music is listed in iTunes even though the files aren't there, so Senuti won't copy anything without some extra steps first.
    I had to delete all the songs in my iTunes library (from within iTunes -- and make sure you choose to *keep the files* on your hard drive).
    Then in iTunes, I chose *File >> Add To Library...* (or Command + O). By default my iTunes Music folder was already chosen, but you might have to navigate to it and then click "Open."
    This will add the files that you do have back into your library. After this, use Senuti and it will copy over all of the missing files from your iPhone to your computer.

  • Outgoing mail server will work on Iphone but not Mail on Macbook

    My POP account will send mail on my iphone no problem, but on the mail program on my macbook it times out. All the account information is identical. The mail program keeps telling the server does not support port 995, but on the Iphone it does. I have tried changing the port but it still won't work. Suggestions please!

    misilulu, outgoing mail uses the SMTP protocol on ports, 25, 587 (for submission only) and, in the case of SMTPS, port 465 (rarely used and deprecated).
    The POP is used for incoming mail on ports 110 or, in the case of POP over SSL, 993.
    If all the settings between your iPhone and your MacBook are the same and you are having problems sending outgoing email on your MacBook it is most likely because you are using the wrong port. If you are using port 25 then it is most likely that your ISP is blocking that port for all mail servers except their own. If that is the case try the mail submission port 587. If that doesn't work then try 465 as a last resort.

  • IMessage work between iPhones but not from other devices or paypal or ...etc

    I can receive messages from iphones using imessages but not SMS sent from non iphones or web sites (e.g. paypal) or my bank !!!
    I have tried to de-active imessage, reboot, checked I am not using the subject, ...etc
    nothing is working
    PLEASE HELP!!!! as I need these SMS to work NOW :-(

    Hello akommatas. Welcome to the Apple Discussions!
    Please try temporarily disabling the Windows or third-party software firewall on any PC that is having difficulties accessing the AirPort Express Base Station (AX) with the AirPort Utility. Can the utility find and access the AX now?
    If not, instead of waiting for the AirPort Utility to scan, go to the utility's menu bar, and then, choose File > Configure Other ... > Enter 10.0.1.1 in the IP Address field, and then, enter public for the password.

  • Can connect iPhone to friend's wifi, but not MacBook Pro. Says password is invalid.t

    My friend gave me her wifi password so I can connect at her house. I onnected my iPhone with no problems. But when I try to connect my MacBook Pro I keep getting a message that the password is invalid. It's the exact same password I used to connect my phone! recently she had relatives visit and the same thing happened for them. What's up?

    You would do better to ask in the Mac Forum - this is the iPad forum.

  • FaceTime works on iPhone, but not on my Macbook Pro.

    Hi, I have long been problems for me to log FaceTime on my Mac. It alwayscomes an error message about the network connection. Now I've tried FaceTimeon my iPhone in the same wireless network and it works. Can someone perhapshelp with this?
    Thanks in advance.

    Lauretta, hi
    I just posted this to another discussion where we've been tracking Apple's Facetime problems
    https://discussions.apple.com/message/22878878#22878878
    "Today, I had to turn off my iPhone in order to do a facetime session between the Facetime app on my MacBook Pro and the Facetime app on my son's iPad mini using his email address because when the phone was on and sitting next to the laptop it kept killing the Facetime connection.  TURN IT OFF!  Can you believe?  Can anyone else out there duplicate this condition?"
    Do you think thi smight have something to do with the problem you described?
    STeve

Maybe you are looking for

  • Load on 2 CPUs is smaller than 2 times load on 1 CPU, how to improve?

    Good afternoon, I am trying to improve the performance on my system. I have used "pbind" to fix a process on a CPU, like this: Process P1 -> CPU 1 Process P2 -> CPU 2 Every process uses Oracle access (although most of the data are loaded into memory)

  • How do I save and display all messages in non primary email address

    I have 2 email accounts on Thunderbird. The emails to the secondary account are not saved. I can open and read new messages but if I want to view them later, they are gone. My primary email retains all messages. Can I configure Thunderbird so I can r

  • WCF Support in Web Services Manager

    Guys, I'm doing so implemtation using Windows Communication Foundation. Specifically using : WS-Security 1.1 WS-TrustFebruary2005 WS-SecureConversationFebruary2005 WS-SecurityPolicy1.1 BasicSecurityProfile1.0 Does OWSM suport any/all of these, as I'm

  • How do I create a new Folder for each test report based on Serial number?

    I want to be able to create a new folder for each test report based on serial number. Each time a UUT is tested, I want the report to go to the appropriate folder. What is the best way to do this? Thanks

  • How do I stop the "open book" animation

    I see the cover of my book in the bookshelf. When I choose the book, it does the standard fly over and opens the book to the first page. I plan to put some nice cover art on my book, so I don't want the book to open but instead fill the screen with t