WiFi in IOS6 does nor work

I read a lot to day about how to handle the Problem, but i doesen´t work on my iPad 3. WiFi still is nor working and was ok until i changed to IOS6.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

WiFi iPhone 4S does not work after update iOS 6.0

WiFi iPhone 4S does not work after update iOS 6.0

This sounds more like a hardware issue.
Have you checked that the dock connector port is not dirty?

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

Kowhai wrote:
Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

IMessage Beta doesn't work on my home wifi but it does at work, any suggestions why?

iMessage Beta doesn't work on my home wifi but it does at work, any suggestions why?

Hi carre13,
Welcome to the Support Communities!
The article below may be able to help you troubleshoot your Wi-Fi issue.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398?viewlocale=en_US
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
I hope this information helps ....
Have a great day!
- Judy

Time capsule Wifi (for guest) does not work

Using the last model of airport time capsule, i faced an issue with the guest wifi. I see the guest wifi on the available wifi list, then i digit the password (system accept it) but i cannot abtain any connection. I tried several time by making several set up (also without protection) but the connection does not work. Only the main wifi is working well (i mean the wifi without any restriction..used by administrator). Someone could help me? thx Marco

The TC must be in router mode.. if it is in bridge even though it looks like guest network is available and even though Apple says it now works.. it doesn't.

Bluetooth keyboard and ipad numbers does nor work appropriatelly

Please, someone knows why the direction arrows in the bluetooth keyboard does not work?

Hello sean:
Welcome to Apple discussions.
If you are able, do the following:
Be sure the devices are on and discoverable. Make both the devices favorites.
Trash a preference file and restart (com.apple.bluetooth.plist).
If you are unable to do the above or it does not help, return the iMac to an Apple store or call Applecare with a warranty issue.
Barry

Ideapad A1-07 tablet wifi-bluetooth does not work!

Hello everyone. As you can see from the title on my tablet is not working wifi and bluetooth. When turning wifi tablet is reset and continues to be off and on until it forcibly turns off, and when you turn it on again, and do not touch wifi everything is normal and there are no problems with resetting. Can someone help me and give suggestion to solve this stupid problem. I'm from Croatia and I'm bad with the English writing.

Hi
Welcome To Lenovo Community
Please perform a factory reset
Please ensure you have backed any important data before doing factory reset
Hold the volume down and the power till Lenovo logo appears .
System will boot into recover mode. Follow the instructions
Hope This Helps
Cheers!!!
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HT1386 Does this work for anyone? For a company who spouts "It Just Works" this WiFi sync just does not work.

What's up with WiFi sync? Is there a trick to it? I get it to work once and then it just doesn't work again. I have an iPhone 5, iPad 3, iOS 6, IMac 2011, latest OS and iTunes, a Cisco E4200. How the heck do you make it work?

Is your computer ON while you're trying to sync through wifi? Sync through wifi will work only if your computer is running at the same time.

SDHC card does nor work on Satellite A200-1J0 with a clean Vista install

Greetings,
When I bought this notebook there was preinstalled Vista 32bit and as usual some Toshiba's drivers and software. As I remeber there was no problems with built in memory card reader, it was reading regular SD cards and also SDHC.
One day I had to reinstall operating system (without using recovery disc) and i've downloaded drivers for my notebook from official site, installed them and the card reader now it's not able to read SDHC cards. Is it just me?
This is what I installed for reader:
-Toshiba Value Added Package where is TOSHIBA Flash Cards inside of it
-Flashmedia Driver
-SD Utilities
I just want to highlight that there's no problem with reading mmc or normal sd cards.
My sdhc card is 100% working properly with other card readers.
Another sdhc card that I have is not working, it's just like I put nothing inside the reader.
Just nothing happens.
Is there anything else that I missed and this is the reason of my problem?
Any fix for Vista or something like that?

Dear Jeffrey,
My problem is solved, thank you so much! :)
This words were very helpful:
"Mostly an installation instruction is placed on the Toshiba European driver page which contains the essential installation order."
So I went on that site and found file where was written:
Contents and Installation order
for Windows Vista
INSTALL ORDER
WINDOWS VISTA
No. Component Name Version
1 Windows Vista RTM
2 Intel ICH7M Chipset Utility native
3 Intel 945GM Display Driver
or
3 nVIDIA G72MV-A3/NB7P-GS Display Driver
4 Realtek ALC861D Audio Driver
5 Realtek 10/100 8101E/ Gigabit 8111B LAN Driver
6 Synaptics Touch Pad Driver (with LuxPad)
7 ALPS Touch Pad Driver
8 TI Multiple Digital Media Card Reader
9 TOSHIBA Software Modem
10 Intel Golan Wireless LAN Driver
11 Intel Kedron Wireless LAN Driver
12 Atheros Wireless LAN Driver
13 Chicony Camera Software
14 Bluetooth Stack for Windows by Toshiba
15 Bluetooth Monitor
16 TOSHIBA Value Added Package
17 TOSHIBA Flash Cards Support Utility
18 TOSHIBA Hardware Setup Utility
19 TOSHIBA Supervisor Password
20 TOSHIBA SD Memory Utilities
21 TOSHIBA ConfigFree
22 TOSHIBA Assist
23 TOSHIBA Speech System
24 TOSHIBA Extended Tiles for Windows Mobility Center V1.01
25 TOSHIBA Fingerprint Utility V5.6.0.3221
Thanks to that file I've found that I haven't installed "TI Multiple Digital Media Card Reader". In toshiba european download site there's nothing like that so nothing weird that I didn't find that before. Here google became a good companion and helped me to find that file. I just simply installed it without deinstaling previously installed drivers (just like is NOT written in install order above) and it's working :)
Thank you once again!
Best regards,
Davit

Published (webfont) Typekit fonts does nor work in Muse

I have published a typekit to utilise in Muse. When I go to add a web font all I get are the standard free fonts. Why can I not see the font that I published, all of which are available as part of my Creative Cloud Subscription.
Any clues?

Hi Stephen,
Please see this thread: http://forums.adobe.com/message/4429756#4429756
Thanks,
Abhishek

Wifi does not work correctly on iPad Mini w/ Retina display

I've found that Wifi does not work properly on the iPad mini w/ Retina display.
Some background: I own three iPads (iPad mini w/ retina display, iPad mini, and iPad 3rd gen), an iPod touch 5th gen, and a Macbook Air, and use them all frequently with my pocket Wifi router.
None of them exhibit any Wifi problems whatsoever except for my iPad mini w/ retina display.
Here are the details:
In the middle of using Wifi with my pocket Wifi router, the Wifi connection will abrubptly drop, then reconnect. After the Wifi reconnects, it is no longer able to connect to the internet (even though Wifi itself is connected).
Once the iPad mini w/ retina display's Wifi gets into this state, the following may or may not restore WiFi temporarily:
Restart the device
Reset network settings
Yet, even if connectevitiy is restored, the problem will happen again within minutes.
When the iPad mini w/ retina display gets into this state, the Wifi on my iPod touch, other iPads, and on my Macbook Air work perfectly fine, so I know the problem is not with my Wifi device or it's connection, but specifically with the iPad mini w/ retina display
Note:
The iPad mini w/ retina display never has any issues with my home or work Wifi networks. The problem only happens when connected to my pocket Wifi device. Yet, all of my other iOS devices and my MacBook Air work perfectly with my pocket Wifi device, therefore I know the problem is not with the pocket Wifi device, but with the iPad mini with retina display.
Solutions:
Resetting the iPad mini w/ retina display to factory settings does not solve the problem
Resetting network settings on the iPad mini w/ retina display does not solve the problem
I have even replaced my original iPad mini w/ retina and got a new one. Yet, the new device exhibits the exact same behavior as the original device.
Conclusion:
I know this is not a hardware problem (since it happened with both my original as well as replacement device).
I know this is not a problem with my pocket WiFi router, since it works perfectly with all of my other iOS devices and MacBook Air.
Therefore, this must be a software / firmware bug with the iPad mini w/ retina display. Apple will need to fix this in a future software update.
Has anyone else seen this problem?

I too have experienced this issue over the past two days... I have a 16gb ipad mini retina, for reference. I bought the device one week ago, and had not experience any issues at all until bringing my device to work. I logged into my work's enterprise level wireless network both yesterday and today, maintained normal wifi capabilities for 2-4 hours each day, and was then randomly dropped, both days. I tried hard resets, resetting my network settings, airplane mode, etc. Nothing has worked. I am still offline on my ipad mini retina.
My iPhone 5 is sitting right next to my iPad mini retina. The iPhone is currently connected to the same very network, and has been for the past two years. I have never lost connection on my iPhone's wifi, just my iPad mini retina.
This must be some kind of bug, as it does not sound like a hardware nor network issue.
Hopefully they fix this in 7.1.

With IOS6 3G does not work. This has already happened with IOS5.1, was only solved with IOS5.1.1. More anyone have this problem? How do you solve?

With IOS6 3G does not work.
This has already happened with IOS5.1, was only solved with IOS5.1.1.
More anyone have this problem? How do you solve?

This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

SWP 6.4 install on second computer in wifi WIN 7 network does not work for me.

Installed on my desktop, works fine. Installed on my Laptop, does not work.
As administrator I see the clip window, can open and close it but no menu, so I cannot use it.
As user the switch in the toolbar is there but it does not activate the clip window.
On both machines the OS is Win 7 Home Premium, the printer is the Smart 109B. Printing through Wifi to my printer which is attached to my desktop as a USB-printer works fine. But i take it the real printing is not involved in working with SWP. Maybe networking but I cannot find any hint. Pse help me.
Henk

Hi Tomasz,
as I figured out, this problem is related to the usage or measurement of the InDesign-document at least for me.
I create two portrait-oriented InDesign Layouts.
For the first I choose Print-usage in the New Document-dialog.
For the second I choose Web-usage in the New Document-dialog.
The first will render as bitmap (wrong).
The second will render as PDF (correct).
Folio- and Article-Image-Type is set to PDF in both cases.
Strange behavior.
Regards
Ingo
Am 06.09.2011 um 15:52 schrieb Tomasz Kuczborski:
OK. Ingo, have a look:
attached below is what you see whenever you create new article. So, if you create 10 articles, you have 10 opportunities to set the rendering intent differently. I think this is wrong, as the image format setting applies to the whole folio. Or maybe it has changed recently? If not, the least what should happen is a warning, that your new choice changes the actual setting.
Cheers,
Tomek
http://forums.adobe.com/servlet/JiveServlet/showImage/81969/ScreenShot2011-09-06at15.46.58.png
>

I downloaded today 09.19.2013 iOS 7 on my iphone 4 and iPad retina. Unfortunately on the camera app the switch from photo to video does not work neither on iphone nor on ipad. Is it a "youth" bug ?

I downloaded ios 7 today 09.19.2013 on my iphone 4 and ipad retina 3hrd generation 64g . The switch from photo to video on the camera app does not work neither on iphone nor on ipad. Is it a "youth"bug ?

Did you try swipe up and down to change?

WiFi in IOS6 does nor work

Similar Messages

Maybe you are looking for