Wifi ipad2 can connect to wifi hotspot but can't browsing with wifi so what should i do?

sometimes ago i can browsing the internet with wifi, but now i can not browsing with my wifi.( wifi hotspot is the same not change) .
anyone can help me ?

Normally i compare to my friend samsang mobile me and my friend both are same place his mobile receiving signal 3point (signal range) but my iphone5s received only 1point(signal range)
You are posting in the Time Capsule area.. do you have a time capsule?
If not the question is better to ask in the iphone discussion area.
We cannot really make much comment on the iphone here as it is an area we specialise in Time Capsule problems.
If your phone is so poor compared to the samsung it sounds like you are using a non-apple router. Certainly the apple routers can have issues but there are some troubleshooting steps you can do.
Reset the TC (used for time capsule from now on) to factory, and use all short names, no spaces and pure alphanumeric. Set different names for 2.4ghz and 5ghz.
So TC name = TC
2.4ghz name = TC24ghz
5ghz name = TC5ghz
Use only wpa2 personal security with 10-20 character pure alphanumeric password.
Now test by manually setting channels, 11, 6, 1 in that order for 5ghz.
36, 40, 44 and 149 or greater for 5ghz.
Force the phone to join 2.4ghz rather than 5ghz for the best range.

Similar Messages

  • My iPod 5 can't connect to wifi. It connects to personal hotspots but no to my home wifi. I tried resetting the network settings but no change. I put the right password but it just keeps loading forever. What should I do??

    My iPod 5 can't connect to wifi. It connects to personal hotspots but no to my home wifi. I tried resetting the network settings but no change. I put the right password but it just keeps loading forever. What should I do??

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • What web player I use on my ipad2 bot watch live sports and how I get it?   PLEASE HELP. Also since I updated my ipad2 to ios6 cannot connect to iTunes  so cannot get no apps nothing can connect to App Store but can't get nothing it's brand new?

    What web player can I get on my ipad 2 so I can watch live sports? And how comes since I updated to ios6 I cannot acces the iTunes can connect to App Store but can't get nothing at all from there? PLEASE HeLP

    Just connect the new iPod to your computer and setup the iPod via iTunes (instead of via wifi).
    If you want to copy all the infor from an old iPod touch to the inew iPod see:
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

  • TS3681 I restored my iPad and then i clicked "Restore iTunes backup". It is finished but on the iPad screen it says connect to iTunes. I connected it to iTunes but it says the same thing. What should I do?

    I restored my iPad and then i clicked "Restore iTunes backup". It is finished but on the iPad screen it says connect to iTunes. I connected it to iTunes but it says the same thing. What should I do?

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port. (Make sure you have the latest version of iTune on your computer)
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • My Iphone doesnt turn on after updating. It keeps on blinking the apple logo, even after seeing the low battery image, i tried to charge the iphone. Then I tried to connect to itunes. But itunes cant recognize the device. What should I do?

    My Iphone doesnt turn on after updating. It keeps on blinking the apple logo, after seeing the low battery image, i tried to charge the iphone. After charging for 30 minutes, it still wont turn on but keeps on blinking the apple logo. It has been blinking for 2 days. Then I tried to connect to itunes, but itunes cant recognize the device. What should I do?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps..
    But... if the Device has been Modified... this will Not necessarily work.
    Unauthorized modification of iOS  >  http://support.apple.com/kb/HT3743

  • Can connect to LAN wirelessly but can not connect to the internet.

    The problem:
    I can connect to the wireless router and modem router wireless and can browse the router setting web pages etc without issue. However i can not browse the internet, send or receive mail etc.
    The setup:
    A Belkin/iinet modem connects to the internet (ip 10.1.1.1), a DLink 565 then broadcasts the signal wirelessly (ip 10.1.1.100).
    What i have tried:
    Trusty old powercycle
    I know the internet is working via the wifi as my ipod touch has full internet functionality through my wifi.
    I have tried using ip address instead of urls to browse the web to no luck.
    I have tried deleting Libary\Preferences\SystemConfiguration\preferences.plist
    I have tried reseting the DHCP lease.
    The only other thing i know works (eventually) is if i constantly change locations back and forth and turn airport on and off repeatedly, eventually i will get on the wifi but that can take upwards of an hour.
    The macbook also works fine via ethernet connected to the wireless router.

    Check these details:
    1. Right click your wireless connection
    2. Select STATUS
    3. Select the SUPPORT tab
    4. Select the DETAILS button
    You should see a page with all sorts of network details.
    Make sure that you see the following:
    1. You have an assigned IP address from your router
    2. You have a default gateway address -- typically the IP address of your router.
    3. A primary and alternate DNS server address (the router gets
    these from your ISP and passes them along during DHCP connect
    processing.)
    I found that step #3 did not happen reliably. Your mileage may vary. I set DNS server values into my router, based on what I got from my ISP, so that the connect-time data handoff was not required. A large part of my troubles went away.
    ~~~ Dan 0;-D

  • Can connect to Linksys WRT54G but can't get to the internet.

    PowerBook G4 17" 1GHz with OS 10.5.4
    Linksys WRT54G v8.00.5
    SpeedStream DSL Modem
    I am having a strange issue. I am able to connect to my wireless network with my PowerBook and can see the Linksys setup page, but I cannot get on the internet. If I bypass the router I can get online with my PowerBook. If I use an ethernet cable connected to my Linksys I can get online with my PowerBook. My Sony Viao can connect wirelessly and get on the internet with no issue. My PlayStation 3 and PSP have no issues. It is solely this machine that is having the issue. I contacted Linksys and went through their troubleshooting to no avail.
    Does anyone have any idea as to what the issue may be, or what I can try to resolve this issue? I have done everything I can think of and no luck. Any ideas?

    Adam D wrote:
    I pinged 208.67.219.99 and the following was returned:
    PING 208.67.219.99 (208.67.219.99): 56 data bytes
    64 bytes from 208.67.219.99: icmp_seq=0 ttl=47 time=88.752 ms
    No error message was returned.
    I plugged the IP address into Safari and, although there were 27 errors, the page loaded. I hadn't tried that before. Interesting.
    The fact that the ping worked means you are connected to the Internet, and what is likely failing (causing the "You are not connected" message) is DNS name resolution.
    DNS name resolution is what converts names like "www.opendns.com" to numbers, like the numbers I gave above, 208.67.219.99.
    Changing your system to use the OpenDNS DNS servers, as directed above, will fix the name resolution issue on your system.

  • Can connect to itunes store but can't update ipod

    So I can Connect to my App's Store and Download Apps but for some reason I cant Update my App's. When I enter my password to Update my App's the screen says Cannot Connect to App Store. I've Restored my Ipod at the Apple Store and it didn't Help so if theres anything I can do to fix this, it would be Great. Thanks.

    Hey bobiannacone,
    Thanks for the question. I understand that you are experiencing connectivity issues with iTunes. The following resource outlines information if you are unable to connect to the Gracenote Service:
    iTunes for Windows: Connection issues when using Internet filters, accelerators, or firewalls
    http://support.apple.com/kb/TS1379
    Thanks,
    Matt M.

  • Songs appear on my ipod 5 when it is connected to my itunes but don't show on the ipod, what should i do?

    I have just bought the new i touch and synced my songs from my itunes to the itouch. However, the songs appear on my ipod when it is connected to the itunes but aren't actually on my ipod.
    What should I do?
    Thanks

    Hi Hirra,
    Thanks for visiting Apple Support Communities.
    If you've synced your iPod touch with iTunes, but the music doesn't appear on the device, you may want to try setting up syncing in iTunes again by following the steps in the right article below. If you're syncing music, try un-checking and then re-checking the "Sync music" checkbox in iTunes.
    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12113
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    Best,
    Jeremy

  • WRT54G v6 - Can Connect to wireless network but can't access internet

    Ok, this is my last resort for help. I spent two hours yesterday with linksys "chat" support to no avail.
    First the techincal details:
    OS for all machines = Windows XP
    Laptop w/two adapters - one wired, one wireless
    WRT54G v6 upgraded with 1.00.9 firmware
    SpeedStream modem from DSL provider
    I have manually set the IP, subnet mask, gateway, primary and secondary DNS for my wireless adapter (using the Alternate Configuration in the Internet Protocol Properties of the Wireless Network Connection). When I connect to the wireless network I see that the IP, subnet, gateway and DNS server IPs are all correct (via ipconfig /all).  I see that I am connected to my SSID (11.0 MBps, signal strength Excellent) however I can't access web sites (the server not found message appears in the browser) nor can I ping the router IP or any other IP (LAN or WAN).
    My wired PC works fine with this router. My laptop works fine with this router when wired. 
    Anyone face a similar situation and have a solution?  Thanks.

    A new discovery...
    When I disable the wireless security on the router, I am able to connect to the wireless network, ping the router and access the internet.  So, there is apparently something wrong with the WEP security (although I am able to connect to the wireless network when WEP is enabled). 
    I am thouroughly confused. Any help is appreciated. Thanks.

  • Can connect HP3920 to PCs but can't connect to Mac using AirPort Express...

    Yes, this is my problem, almost unbelievable!!!
    I have a HP Deskjet 3920 attached on an AirPort Express and I did add it in my two PCs (one XP and another Vista) using Bonjour for Windows but no way to add it in my MacBook (Leopard).
    I tried everything but apparently there is no way to do that... I just want to know why and what do I need to look for when choosing a printer...
    Regards,
    Alex

    Solved.
    I had likely the same problem. It was solved by replacing the home router internal connections with a real switch.
    Many home routers will not properly multicast the required Airplay/Bonjour multicasts.  Netgear and D-Link for instance does not work, although some ASUS routers work if you turn off IGMP snooping and fiddle with the firewall, but only with some firmware, so it is very iffy.
    So, in my case, I connect Internet modem <-> router <-> switch <-> access points <-> devices
    Works without any problem. Also the wired devices connect to the switch.
    Do not connect any Airplay devices to the router!

  • TS1424 " itunes could not contact the ipod software update server because you are not connected to the internet " . but my itunes store and internet works. what should i do?

    i can not restore my ipod ot my iphne because the message above pops up. please help.

    Temporarily disable your firewall and antivirus software and try again...
    See here for Connection Issues
    http://support.apple.com/kb/TS1379
    From Here
    http://www.apple.com/support/itunes/troubleshooting/

  • Can't get my portable hard drive to conect with FCP! What should I do?

    Every time I try to reset my scratch disk to have my media go to my portable hard drive the message "Unable to set scratch disk. Selected directory is on a write protected or non-writable media." How do I change/fix this so my media can be sent to my portable hard drive?

    Hi - Try this.
    In the finder, click on the external drive icon.
    Go to the Menu:: File > Get Info
    A window will open.
    At the bottom of that window, click on the triangle next to "Sharing and Permissions" to open the pane.
    Click on the lock at the bottom corner of the pane and enter your password so that you can change the permissions for the drive.
    Change the permissions. Re-lock the pane.
    Close the window.
    Restart your computer.
    You should be good to go.
    Hope this helos.
    Message was edited by: Meg The Dog to fix typo

  • IPad 2 connects to personal hotspot but not wifi

    I dropped my ipad2, but all seems to be working fine except for my wifi. What doesn't seem to make sense is that my wifi will see and connect to my iphone 5S personal hotspot but doesn't see my wifi router.  It is also picking up other wifi signals from my smart tv. If there is a wifi hardware issue, shouldn't that impact the ability to connect to hotspot?

    Hello Bella9678
    Start with going into Settings > General > Reset and Reset Network Settings, then try to connect to your Wi-Fi network. Check out the article below for more troubleshooting options to get your Wi-Fi working again.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Regards,
    -Norm G. 

  • I purchased an Italian hotspot to access internet on my American Ipad2 while abroad. I had no trouble connecting to the hotspot but when I try and access the internet it "cannot connect to the server". what does that mean and how can I fix it?

    I am abroad for the summer and there is no internet available. I purchased a hotspot in a nearby vodaphone and they helped me connect the Ipad to the hotspot. I assumed I would have no trouble after that. Once I got home though and connected to the hotspot i found i could not open the internet without getting a notice about not connecting to the server. I have a signal and can connect to the hotspot and yet i get no internet. I already spent 50 euro on the hotspot for 2 months of wifi...is there a way to actually fix the problem without me having to spend more money?

    I'm guessing e mail does not work either.  While the pad is seeing the network, it is not yet connecting, probably trying to work through your security set up.  I suggest you go to settings, then network, then the details of the network.  Do you see an ip address that starts with 192.168.1. Then some number? If not, the router has not made friends with the pad.
    Suggest that from that same screen, you select 'forget this network'. Then start over again, paying close attention to what happens when you provide the security password.

  • My safari can connect to the Internet, but other apps can't. I am using ipad3 wifi edition

    My safari can connect to the Internet, but other apps can't. I am using ipad3 wifi edition

    I have managed to resolve it. What I found is I typed in a wrong password when one app loaded. That app gave a misleading network connectivity error. Other apps are connecting fine now.

Maybe you are looking for