WiFi is always disabled after period of inactivity

When my ZTE One (orange) sits idle for a while, WiFi is always disabled when I wake up the phone. I re-enable WiFi & everything is fine, but I shouldn't have to do that each time.

Hi!
If the signal strength is not powerful enough to receive a connection for a period of time the Wi-Fi will disconnect and eventually disable itself. <br> Although, if there is a Wi-Fi network recognized but the phone is inactive the phone will disconnect and this is to save you battery power, but once you wake the phone, the phone should automatically connect back to Wi-Fi if the network is in range and if the signal is good.
Should you have any more questions regarding this, please feel free to ask.
Thanks!
-Andrew

Similar Messages

I keep losing my wireless connection after periods of inactivity - any solution? I recently installed a new wireless router with improved range.

I recently installed a Netgear Wireless router for improved reception, but now my macbook loses connection through Airport after periods of inactivity. We have another older Macbook in the house, and it never loses connection. I never had this problem with the previous Linksys router, just limited range. Any ideas what is causing this? It's frustrating to have to frequently shout down and re-boot. That so far is the only way I can re-connect.

Adjust the Wireless Settings on your linksys router...
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab on the Setup page- Here Wireless Network mode should be mixed- Provide any non linksys network name ....
Name (SSID) box- Set wireless channel to 11- And wireless SSID broadcast should be Enabled and then click on "Save Settings" >>
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your
network key whenever you connect to your wireless network.
Do NOT give this key to anyone.
Click on Advanced Wireless settings>>
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2304 >>Click on "Save Settings" ...
Try to look for the Wireless Network on your laptop and attempt to connect...

MacBook Pro shuts down after periods of inactivity

I had a 6-year old MacBook Pro. Besides just being a bit old and tired it would attempt to shut down after periods of inactivity. I tried setting it to never sleep. I tried the whole reset thing where you take the battery out and hold the power button for 5 seconds. I bought new memory for it. Eventually I used it as an excuse to buy a new machine.
Of course I copied my image over to the new MacBook. Now I know its not a hardware issue because it still happens!
I also have other quirky issues (probably not related, but who knows).
I just cannot get my remote (or any apple remote to work).
I have an empty folder that I can't delete–it crashes the system.
Aperature hangs up all the time
VMware hangs up all the time
Firefox and Chrome both hang up
Sometimes I have to force quit Mail
Is this a good time to do a clean install?

Resetting the SMC doesn't seem to have done anything. The progress bar hasn't reached the end to shut down yet, but so far, it's displaying the same behavior.

Sun Rays with VDI 3.1 - Black screen after periods of inactivity

Running VDI 3.1 with bundled versions of SRSS on three servers in a cluster running Solaris 10 with VSphere as a desktop provider - also using meta-kiosk with all smartcards configured to run "VDA" script when inserted, DTUs require registered cards.
Bit of a strange issue that is unfortunately not always reproducible:
After what seems a random period after having removed a smartcard from a DTU (if still logged into a Windows session, or after disconnecting it) sometimes as short as 20mins, sometimes only after overnight, upon reinserting the card, the VDI login screen does not always appear immediately (as should happen), but instead a black screen with a moveable mouse pointer is shown. This persists for almost exactly 2 minutes whenever it happens, then the VDI screen appears. If you manually kill the session from the admin web-interface and power-cycle the Sun Ray, it will pop up immediately as expected.
At times, the VDI screen does simply appear immediately as expected, at others this 2-minute black screen first...
You can often force the behaviour on a working VDI login screen by choosing "More options - Quit" - this will often trigger the black screen/2 minute delay. At other times quitting in this manner does not reproduce the error and the VDI login screen appears immediately.
I've researched this for a couple of weeks, and a lot of bugs mentioning "black screens" pointed towards problems with uttsc-bin - I've already applied the patch here: http://sunsolve.sun.com/search/document.do?assetkey=1-21-143215-03-1 to no avail.
I assume that it possibly is nothing to do with the Windows connector, since it's really the VDI login screen that is not appearing in a timely manner and Windows logins/sessions always start/resume immediately after logging in from the VDI screen.
Can anyone offer any help?

Never figured out what was causing this, but an upgrade to VDI 3.2 has fixed it (for now at least!)

Wifi connection alway disconnect after update to iOS6

After update to iOS6 for a month, I found the wifi connection alway disconnect and need to reconnect severaly times. Plese help to suggest for setting up.

Hello there cyldevil,
I would recommend using this article if the Wifi is grayed out in settings.
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Here is also some additional info on troubleshooting wifi in general on your device from iOS: Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/ts1398
Be sure that you are in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.If unable to do so, see this article.
Confirm that your Wi-Fi router and Cable or DSL modem are connected to power, turned on, and indicate that they are connected to the Internet.If not, refer to your network administrator or ISP for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you are connected. Then tap > and Forget this Network. Try to connect to your desired Wi-Fi network again.
Note: You will need to enter your Wi-Fi password again if your desired network requires one.
Turn your Wi-Fi router off and then on again2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2.For AirPort Base Stations, see this article for information about firmware updates.
All the best,
Sterling

Applications closing after period of inactivity

My applications are closing after a period of inactivity. I would appreciate any help. I'm on a 27inch iMac late 2013 running 10.10.1.
If application is idol for some time it can close on me. Skype closes often. Adobe products and mamp will close periodically as well. This really interrupts my work flow. Any help would be much appreciated.

Hello neverask333,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like multiple programs close on their own. I would recommend that you read this article, it may be able to help the issue.
OS X Yosemite: If an app freezes or quits unexpectedly
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Set auto shut down for iPod touch after period of inactivity

I keep falling asleep with my iPod on. My old MP3 player had a setting where it automatically shutdown after a specified period of inactivity. Is there a download or setting of some sort that will make the ipod touch do the same?

I can't try it out for you now and don't know if it's on 2.x, but read p. 32 of the IPT manual under Sleep Timer. The option is under the Clock -> Timer on the Home menu. If the feature is still there...
Here's a link to the online manual:
[http://manuals.info.apple.com/en/iPodtouch_FeaturesGuide.pdf]

Run script after period of inactivity

I'd like to run an apple script after a certain period of inactivity (say 10 minutes). is there a way to do that?

Sample code:
property iRun : 0 -- Global variable (retains latest value between applet executions).
on run
set iRun to 0 -- Clears global variable.
say "Working" -- Optional, your code here.
end run
on idle {}
if (iRun > 0) then -- Do not execute code immediately, instead wait until after delay time.
say "Processing" -- Your code here.
end if
if (iRun = 1) then quit -- Optional code, to quit after processing use code, after a single delay period.
set iRun to 1 -- Needed to guarantee that code is processed after delay period.
return (60 * 10) -- Where '10' indicates 10 minutes.
end idle

Disconnect Bluetooth Device After Period of Inactivity

I have connected a bluetooth device successfully, and it remains paired through power cycles. I'm attempting to now get the device to disconnect after a certain period of inactivity. The device is a ps3 controller, if that matters.
Any advice?

Sorry,
HP 8600 Pro e
Windows XP SP3
IE8
Computer->Router->DSL Modem->Internet
Assigned IP address on Computer
Reserved IP address on Printer
I guess I could also solve the problem by attaching the WIRELESS printer with a cable to the router, but HP is selling thise products as wireless, so why should I have to do that?

Laserjet 300 color MFP nw STOPS SEEING NETWORK after period of inactivity

I work in an office of a television show. We are all on Macs. Printer worked fine for a while, now has an annoying problem.
IF we turn it on, it prints fine for a while and the printer IP is seen by my browser. BUT, if you wait an indefinite amount of time (not sure how many minutes/hours), THEN try to print or access the printer IP... the connection fails.
I've updated the fimware. I've disabled IPv6. I've created a static IP address for the printer, re-added the printer using the IP address-- all to no avail. Each time, after an unspecificed amout of time... the printer seems to DROP from the wireless network, which requires users to turn it off, then on so that it can be seen by the network.
PLEASE SOMEBODY tell me that it's a simple setting and not the network card failing... !

Hi BenjaHa,
Welcome to the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Tour will not turn back on after period of inactivity

Hello,
My Tour will not turn on after about 2 weeks of inactivity. The battery was stored in it at appx 40% (I realize this was probably a mistake...).
When plugged into the charger, the red light goes on for appx 10 secs, then turns off (whether battery is in or out).
Several battery pulls have not made a difference.
Phone has been plugged in for over an hour now, with no result.
Tried putting the battery in with the phone plugged/unplugged.
Plugging phone into PC USB tries to install the drivers (so it's def not fried)
Thank you in advance for ANY help
Wesley

Yes I was going to suggest the same thing. Either place a friend's in your device or take it into your carrier's store to see if another battery does the trick
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

L3 Cache Always Disabled after Boot

Hi
I hope someone can help.
Basically I have only noticed this in the last few days. I had thought a few of my audio applications were showing more cpu use and thought I was losing the plot.
But when I check in the preferences - processor, the 1MB L3 Cache always shows disabled. At first I thought my hardware had broke but I can enable it if I go into the preferences and manually do this. But I have to do this everytime I start up ..this never happened before, how do I get it to stick?
I have checked the cache is working correctly and all reports were good.
I dunno what to do now..Please Help.
Thanks
Daryl

Its just happened again..I've managed to figure out whats causing the problem but not why its happening (10.4.7)
The power management in osx has started acting up . I think its OSX 10.4.7 broken something, because its just started happening since then (hardware tests ok).
The battery is alive but it stops getting charged, L3 cache gets disabled (reduced mode) and the battery meter keeps trying to calculate and is stuck wasting cpu cycles.Performance has gone out of the window.I am doing audio work so noticed straight away and just thought ... not again.
Apple fix this please. 10.4.7 seems to have some serious issues (I've been lucky up until now)

Cannot prevent display from dimming after period of inactivity

once again, another weird unexplainable problem that has been discussed on here but never quite solved. this has nothing to do with the ambient light sensor or the "pass your hand over the speaker grill" situation.
the problem is that my screen dims after about 2 minutes of inactivity. I've got the "reduce screen brightness before sleep" UNchecked, and the "adjust brightness as ambient light changes" is also UNchecked. I've made these settings for both the power adapter and the battery. I don't see any reason why the screen should dim unless I've checked the option to make it do so.
any ideas?

I found this:
http://www.technodaddy.com/wp/2005/07/24/mac-tip-how-to-stop-tiger-from-half-dim ming-your-screen/
which I tried, and it worked. however, when I listed the current state (according to the directions) it was already at 0 (zero) but I did the command as directed and it doesn't dim any more.
cheers!
15" powerbook (new version) Mac OS X (10.4.3) 100 GB 7200 rpm hd

FCP FREEZES AFTER PERIOD OF INACTIVITY

Running FCP 5 onPowerPC Powerbk G4, 1.67
OS: 10.4.11
Whenever I leave the program just sitting there with no activity (usually at least 1/2 hr or longer) the canvas freezes. The audio plays and pretty much everything else is functional.
My only known solution is to close and reopen FCP. I've been editing this one project for several months and the problem has only appeared in last several weeks.
thank you.

Absolutely no way to even start guessing. But that's never stopped me.
Usually associated with the sleep function.
bogiesan

Indesign CS5 gets paralyzed after periods of inactivity

This happens also with Photoshop and Illustrator, under OSXLion.
Reviewing the posts I cleaned preferences, repair HD permissions and verify disk but this failure is so pesistent: making some activity during 15 minutes outside the Suite and then applications are not responding...
Thank you.

DOV ISAACS!!!!
Some hours ago you posted here a very interesting commentary that has disappeared...
You talked about the relation between OS crashing and damage of files in preferences that could interfere in the process of opening the CS...
I have a post about it but it is not here anymore and cannot refer as a proper quotation is required.
Thank you.

WiFi is always disabled after period of inactivity

Similar Messages

Maybe you are looking for