Wifi is connected but not functioning correctly

Ok I have a iPhone 4S, when I brought it after Christmas it connected to my 'Virgin Media wifi' instantly and game me the full 60 meg speed. As time has gone by, and multiple wifi routers replaced (thought it was initially the router) the iPhone is now struggling to connect and when it does its speed is less than using and EDGE conection. Of I reset the conection settings it works well again but after a week or so it will deteriorate back to how it was before he restart. I'm not sure if this is an ongoing problem with the hardware or if the software doesn't like virgin media as all other makes of phone and laptop will happily connect to my wifi with decent speeds. Hope someone can give me a few pointers on what happens
P.S. I have restarted the router multiple times

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Have each of these steps been tried?

Similar Messages

IPhone 4 vibration, wifi, and calling will not function correctly?

I have had my iPhone 4 for 6 months now, and I have dropped it a couple of times, but a few days after I dropped it nothing happened. My first problem started in May when I noticed that my phone could not reach the wifi at home or other places quickly as it normally could and when I would go into other rooms I would lose the connection quickly.This made me have to use my 3g more often and I only have a limit of 300MB, I normally do not use it, because of the wifi i have around,but it is getting harder. 2-3 days ago I called the DATA (*3282#) in my phone and got 64.89 out of 300MB. I later used my 3G for awhile, so a day later i called DATA and the same number (64.89 out of 300MB) comes on again. I knew this was a mistake so I called it again and the same number shows up. I KNOW FOR SURE I USED MY 3G, so I dont know why this keeps popping up. Everything else channged (texting and calling) On top of that my vibration started to not work in early June and it's difficult for me to know when someone has texted or called. I have tried going into settings and choosing a different type of vibration, but it does not vibrate overall and yes it is turned on. My version right now is 6.1. Will upgrading help? Everything else works fine, but is there a way I can fix this or do I have to go the Apple Store? I'm also in AT&T.

For the data usage,
I have AT&T as well and I found that the Data usage only updates about once a day even though texting updated instantly.
As for the vibration,
The vibration motor thing may be broken.
But I am not sure.

On 3G we cannot send emails from either our iPhones or iPad and this also happens with some WiFi connections but not all. Yet we can always send emails from our Hotmail Email account. What is causing this and what do we need to do to resolve it?

On 3G we cannot send Business emails from either our iPhones or Ipad and this also happens with some WiFi connections but not all. Yet we can always send emails from our Hotmail Account using both 3G and WiFi.
We bought the iPhones and Ipad so that we could send emails while we are out of the Office, but we are not able to do this unless we can find a WiFi connection. Incoming emails are fine. We use IMAP, for Business emails just incase this is relevant and I know that Hotmail is POP3.
Our technical IT knowledge is not great, so we look forward to your suggestions as to how to resolve this.

Contact whomever supports the email account and get the correct Outgoing email server settings from them.

HP Photoprinter C7280 printer. The wireless radio is on but not functioning - so no wifi conection.

HP Photoprinter C7280 printer. The wireless radio is on but not functioning - so am unable to gain wifi connection and print! - Why? How do I fix, Thanks

I would guess that the printer's wireless radio has died. Have you tried plugging the printer into your wireless router with an Ethernet cable? It should work and give you the same functions as wireless. Your computer or router will not care how the printer is connected.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My wifi is connected but when i try to connect to safari it tells me its not connect it says safari cannot open the page because it is not connected to the internet.. but the wifi is on and connected, i have tryed resetting the network settings

my wifi is connected but when i try to connect to safari it says the internet is not connected, i tryed resetting network system but still no luck.

Your iPad sees the WiFi network signal but obviously it is not connected to the network. Try rebooting your router - unplug it for about 30 seconds and then plug it in again.

I believe my firefox is viewing some websites on my laptop in formats that are used for cellular devices. Sites like facebook, sports illustrated, yahoo are not functioning correctly but certain sites work fine.

sits such as facebook, yahoo, and sports illustrated do not function correctly on firefox but they do on my internet explorer. I believes its somehow set itself into the same format used for cellular devices... My JSU.edu page says somethin about it being in (portal mode). It is also a different format now that normal.

Hi @TheBigGiggle ,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY TouchSmart 17 Notebook PC and a keys not functioning correctly. Here is a document on cleaning the keyboard.
I would start with air on the keys as sometimes debris can cause this issue.
Here is a link to uninstall the keyboard. In the device manager have you uninstall all that is listed in keyboards, restart the computer after uninstalling, it should reinstall automatically and resolve any issues with the keyboard.
Here is a link to keyboard troubleshooting.
Here is a fix from Microsoft that might help.
Let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

In my iphone 4, wifi is connected but internet is not running. when i usd safari and other internet application it alwasys says wifi is not connected. why ? what happen to my iphone?

in my iphone 4, wifi is connected but internet is not running. when i usd safari and other internet application it alwasys says wifi is not connected. why ? what happen to my iphone?

Try Settings > General > Reset > Reset network connections.
Other basic troubleshooting from the User's Guide is reset, restart, and restore.

Got a new LG in Anchorage and was told Glennallen, AK is in a service area. Got home and all I get is Message 41, Roaming. Can make calls with WiFi connection but not on the road. Any idea whats going on?

Got a new LG in Anchorage and was told Glennallen, AK is in a service area. Got home and all I get is Message 41, Roaming.
I can make calls with WiFi connection but not on the road. Any idea whats going on?

Oh no! I'm sorry to hear you had problems in the are you're in AkJohnDye. I checked your coverage and I do see we have an extended 4G coverage. This means you're able to use your phone but it needs to be activated in a 4G LTE Verizon Wireless coverage zone. I apologize.
AdaS_VZW
Follow us on Twitter at @VZWSupport

Iphone is recognized, but not identified correctly

Hi,
i have a problem with my iphoe 4 under Win 7 x64. Everytime i connect the phone iTunes shows me the message like 'iphone is recognized, but not identified correctly' (in German: ein iPhone wurde entdeckt, konnte jedoch nicht korrekt identifiziert werden.)
I have a debug log attached.
Uninstall an Install newest iTunes have i repeated three times. I checked every USB-port and i have disabled my virus scanner G-Data.
Anyone any idea?
Greetings Stephan
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe]
====================================
AppleMobileDeviceHelper.exe begins
====================================
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] parent process: 6300 "iTunes.exe"
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] main thread 4108
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] command line: "C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\AppleMobileDeviceHelper.exe" --pipe \\.\pipe\30122278-1496151065100246300 --parentPipe
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] ALLUSERSPROFILE=C:\ProgramData
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] APPDATA=C:\Users\bomholt\AppData\Roaming
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] asl.log=Destination=file;OnFirstLog=command,environment,parent
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] CLASSPATH=.;C:\Program Files (x86)\Java\jre6\lib\ext\QTJava.zip
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] CommonProgramFiles=C:\Program Files (x86)\Common Files
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] CommonProgramW6432=C:\Program Files\Common Files
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] COMPUTERNAME=SBSM6300
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] ComSpec=C:\Windows\system32\cmd.exe
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] FPNO_HOSTCHECK=NO
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] HOMEDRIVE=C:
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] HOMEPATH=\Users\bomholt
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] lib=C:\Program Files\SQLXML 4.0\bin\
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] LOCALAPPDATA=C:\Users\bomholt\AppData\Local
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] LOGONSERVER=\\SBSM6300
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] MOZCRASHREPORTER_DATADIRECTORY=C:\Users\bomholt\AppData\Roaming\Mozilla\Firefox\Crash Reports
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] MOZCRASHREPORTER_RESTART_ARG0=C:\Program Files (x86)\Mozilla Firefox\firefox.exe
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] MOZCRASHREPORTER_STRINGSOVERRIDE=C:\Program Files (x86)\Mozilla Firefox\crashreporter-override.ini
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] MpConfig_ProductAppDataPath=C:\ProgramData\Microsoft\Windows Defender
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] MpConfig_ProductCodeName=AntiSpyware
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] MpConfig_ProductPath=C:\Program Files (x86)\Windows Defender
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] MpConfig_ProductUserAppDataPath=C:\Users\bomholt\AppData\Local\Microsoft\Window s Defender
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] MpConfig_ReportingGUID=1B1BB305-BF4F-4BA6-8BD8-01850E52FC93
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] NLSLANG=GERMANGERMANY.WE8ISO8859P1
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] NUMBEROFPROCESSORS=2
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] OS=Windows_NT
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] Path=C:\Program Files (x86)\Common Files\Apple\Apple Application Support\;C:\Program Files (x86)\Adobe\Reader 9.0\Reader\plug_ins;C:\Program Files (x86)\Adobe\Reader 9.0\Reader\;C:\Program Files (x86)\Mozilla Firefox;C:\Windows\system32\ora11g\;C:\Program Files (x86)\PC Connectivity Solution\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\Sy stem32\WindowsPowerShell\v1.0\;C:\Program Files\Intel\WiFi\bin\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;C:\Program Files (x86)\Vulcan.NET\Bin\;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Program Files\TortoiseSVN\bin;D:\Program Files (x86)\Vulcan.NET 2.0\Bin\;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files (x86)\CVSNT\
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] PROCESSOR_ARCHITECTURE=x86
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] PROCESSOR_ARCHITEW6432=AMD64
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 23 Stepping 6, GenuineIntel
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] PROCESSOR_LEVEL=6
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] PROCESSOR_REVISION=1706
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] ProgramData=C:\ProgramData
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] ProgramFiles=C:\Program Files (x86)
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] ProgramFiles(x86)=C:\Program Files (x86)
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] ProgramW6432=C:\Program Files
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] PUBLIC=C:\Users\Public
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] QTJAVA=C:\Program Files (x86)\Java\jre6\lib\ext\QTJava.zip
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] SESSIONNAME=Console
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] SystemDrive=C:
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] SystemRoot=C:\Windows
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] TEMP=C:\Users\bomholt\AppData\Local\Temp
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] TMP=C:\Users\bomholt\AppData\Local\Temp
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] TNSADMIN=d:oracleproduct11.1.0db1\NETWORK\ADMIN\
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] USERDOMAIN=sbsm6300
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] USERNAME=bomholt
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] USERPROFILE=C:\Users\bomholt
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] VS100COMNTOOLS=C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\Tools\
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] VS90COMNTOOLS=C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\Tools\
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] VSTO_SUPPRESSDISPLAYALERTS=0
[8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] windir=C:\Windows
[6300 @ Tue Dec 21 16:49:35 2010] [(unknown facility) iTunes.exe] AMDeviceCopyValue (thread 9616): There was an error getting the value for [com.apple.mobile.iTunes]:[] from lockdown: InvalidResponse
[8416 @ Tue Dec 21 16:49:50 2010] [YSLoader AppleMobileDeviceHelper.exe]

I had a little time to elaborate with and getting involved more deeply. I found out that there was an old installation of IrfanView (some older version) which probably interacted with the iTunes. After unistallation both iTunes (including registry entries and all files from disk) and that sh*t (=IrfanView), the new iTunes installation ran properly and the problem was solved.
It could be caused by the exact combination of: Win7, iTunes 9 or 10, IrfanView, Lenovo T400 and probably something more I cannot recognize .
p.s. During the problem solution I bought me a brandnew iPhone 4 so I was able to test it both with iPhone 4 and iPhone 3. The result was - It does not matter what iPhone do you have...

N96 Telephone Service Not Functioning Correctly

Good evening folks,
Now, I've had this problem for as long as I've had an N96. TWO N96's in fact, as my first was replaced by Nokia due to the screen-slide connection malfunctioning. Both have been fully firmware updated and restored on multiple occasions in an attempt to fix the problem.
The telephone service on the handset has the habit of not functioning correctly, like the service has hanged or just doesn't respond.
For example, I find a contacts name in contacts, press the green key to show their contact numbers, and green again on the number I wish to call- nothing happens, other than the available numbers disappear and you return to the regular contacts view. This is what would normally happen anyway, only you'd have an outgoing call happening over it and showing the "telephone" screen.
Or, example two, in a text message I chose Options > Call > Voice Call and press the select or middle button to initiate the call- No call, instead the options dialogue disappears and I return to the standard message view. Again, I should be in an outgoing call, not viewing my text message.
Example three, to really show the telephone service isn't working;
I'm in full signal, text messages are functioning correctly and the mobile web is working flawlessly. A friend sat next to me rings me and is immediately directed to my voicemail, not a single indication from the handset that I may have been receiving a call.
Seconds later I receive a text message from my operator to let me know about a new voicemail my friend just left me.
So, the telephone service isn't functioning as it should be.
A quick restart fixes the problem in 4 out of 5 cases, however usually within 24 hours the problem is persisting again.
Not being able to make outgoing calls isn't a problem, because at least then I know the telephone service has failed on me and I can restart.
A potentially important incoming call about anything being directed immediately to my voicemail? Problematic, especially if they don't leave a message and instead just keep trying me, as I receive no notification from my operator about missed calls and there is no way other than to try and make an outgoing call as to determine whether the service is still functioning.
It isn't shown as a regular application whilst not in a call and I don't believe I should even have to check if it's still running as this function is the main function implied in the device category 'smartphone'.
Rant over, so if there's anyone out there who could shed some light onto this situation, please do.
Also, kind of off topic- but in the case that this is a universal problem (which I'm assuming it is, having had two completely different handsets with the same symptoms), do I go after Nokia to provide me with a different model of handset, or the supplier (The Carphone Warehouse) since my handset isn't properly providing a function that is advertised?
Somehow I presume I'm rightfully entitled to a reimbursement or different model. Hopefully.
Thanks in advance people

You're so right.... I managed to get over the problems, never upgraded the firmware... Once I got all the apps I use and needed, never touched it.... Still the phone is a mess, worst ever... I came from an Iphone, fleeing from lock OS and stuff, and found myself in a Symbian hell..... Definitely Windows Mobile... I'm so down on this phone, I spent 650 dollars, one year ago.... The worst investment ever... Never again a Nokia or a Symbian smartphone, for cheap ones apparently are the best. I'll wait another year, to feel less pain when buying a new one for 600-1000 dollars.
Solution: Buy another phone... Better if it is a Windows Mobile.... As HTC for example.
Regards,

CUC Cluster not functioning correctly

Saw a few posts and documents relating to this issue but they don't match up perfectly with my particular scenario. Basically, the customer could no longer log into the Unity Pub so we had to do a rebuild as nothing was working. The sub took over as it should, a co-worker rebuilt their Pub and the split-brained effect never went away. In, fact they arn't communicating at all almost a week later. Here are the things I've checked so far:
DB Replication: (from the subs perspective)
DB and Replication Services: ALL RUNNING
Cluster Replication State: Only available on the PUB
DB Version: ccm9_1_1_10000_11
Repltimeout set to: 300s
PROCESS option set to: 1
Cluster Detailed View from XXXXX-UCXN02 (2 Servers):
                                PING            CDR Server      REPL.   DBver& REPL.   REPLICATION SETUP
SERVER-NAME     IP ADDRESS      (msec) RPC?    (ID) & STATUS   QUEUE   TABLES LOOP?   (RTMT)
XXXXX-UCXN01    10.200.9.21     0.575   Yes     (2) Connected   0      match   Yes     (2)
XXXXX-UCXN02    10.103.9.22     0.067   Yes     (3) Connected   0      match   Yes     (2)
(Pubs perspective)
DB and Replication Services: ALL RUNNING
DB CLI Status: No other dbreplication CLI is running...
Cluster Replication State: BROADCAST SYNC Completed on 1 servers at: 2015-01-23-17-19
     Last Sync Result: SYNC COMPLETED 603 tables sync'ed out of 603
     Sync Errors: NO ERRORS
DB Version: ccm9_1_1_10000_11
Repltimeout set to: 300s
PROCESS option set to: 1
Cluster Detailed View from XXXXX-UCXN01 (2 Servers):
                                PING            CDR Server      REPL.   DBver& REPL.   REPLICATION SETUP
SERVER-NAME     IP ADDRESS      (msec) RPC?    (ID) & STATUS   QUEUE   TABLES LOOP?   (RTMT) & details
XXXXX-UCXN01    10.200.9.21     0.084   Yes     (2) Connected   0      match   Yes     (2) PUB Setup Completed
XXXXX-UCXN02    10.103.9.22     0.663   Yes     (3) Connected   0      match   Yes     (2) Setup Completed
Clusters look good:
admin:show network cluster
10.200.9.21 xxxxx-ucxn01.xxxxx.local xxxxx-ucxn01 Publisher authenticated
10.103.9.22 xxxxx-ucxn02.xxxxx.local xxxxx-ucxn02 Subscriber authenticated using TCP since Fri Jan 23 16:42:15 2015
Server Table (processnode) Entries
10.200.9.21
10.103.9.22
Successful
Overall, they are in that split-brained mode and working with CUCM but I'm not sure why it hasn't corrected itself. Both the pub and sub have been restarted to no effect.... Any ideas on why this is still happening? I am in the process of pulling logs.
Error shown by CUC at the Admin page after login:
  Communication is not functioning correctly between the servers in the Cisco Unity Connection cluster. To review server status for the cluster, go to the Tools > Cluster Management page of Cisco Unity Connection Serviceability.

Check NTP. Ensure Unity is synced to a stable good stratum source - preferably stratum 1,2 or 3.
On your version, time slips can cause memory leaks on servm. This in turn affects cluster communication.
You said you couldn't access Pub. Pub would have been on high CPU. Another symptom of this issue.
You can confirm by looking at the core dumps - 'utils core active list'
See if there are any servm core dumps. Most likely the server is affected by CSCug53756 / CSCud58000
HTH
Anirudh

Cisco vpn 5.0.07.0440-k9 connected but not access remote network from Windows 8.1 pro

I am using Cisco vpn 5.0.07.0440-k9 and Cisco vpn 5.0.07.0290-k9 both version on our windows 8.1 pro laptop.
VPN successfully connected but not access remote network and not getting ping.
But when i am try through wifi then vpn good work.
Please help me as soon as possible.
Thanks
Sanjib

Hello Karthik,
I am using "MTS usb wifi" device and connect vpn through wifi Its working good the same win8.1 pro. But when i am try to connect VPN through LAN/Wired or USB modem (Like: Vodafone,MTS and others) its not working.
I am using Easy vpn on Cisco RV325 router in our office. Same VPN client is very good working in Windows 7 SP1 and Windows XP SP3.
Thanks
Sanjib

Spry Menu Issues - Not functioning correctly in Microsoft IE

Hi there,
I am fairly new to web design and dreamweaver.
I have constructed a simple page that I am happy with complete with Spry Menu which again I am happy with. However this spry menu works perfectly in firefox but for some reason on IE my spry menu does not function correctly and goes all over my page!
CORRECT VERTICAL MENU - FIREFOX -
INCORRECT MENU FUNCTION! - IE -
See my CSS Code below for the spry menu in questions - if this helps -
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
    margin: 0;
    padding: 0;
    list-style-type: inherit;
    font-size: 100%;
    cursor: default;
    width: 1000px;
    height: 47px;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
    z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: medium;
    position: relative;
    text-align: center;
    cursor: pointer;
    width: 318px;
    float: left;
    height: auto;
    background-color: #000000;
    border: 2px solid #FFF;
    font-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    z-index: auto;
    cursor: default;
    width: auto;
    position: absolute;
    left: -1000em;
    font-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
left: auto;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
    width: 318px;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
    position: absolute;
    margin-top: -5%;
    margin-right: 0;
    margin-bottom: 0;
    margin-left: 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
    left: auto;
    top: 0px;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
    border: 1px solid #FFFFFF;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
    display: block;
    cursor: pointer;
    background-color: #bcbdb9;
    padding: 0.5em 0.75em;
    color: #FFF;
    text-decoration: none;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
    background-color: #000;
    color: #FFF;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
    background-color: #000;
    color: #FFF;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
    background-image: url(SpryMenuBarDown.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
    background-image: url(SpryMenuBarRight.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarDownHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarRightHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
    filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
    display: inherit;
    f\loat: left;
    background: #FFF;
** I am also using Windows 8 and Dreamweaver CS6 If this helps.**
Any help with this would be fantastic as I need this to be resolved before the end of the week.
Any further information required please message me to find out.
Thanks,
Jamie

THE CONFLICT IS BETWEEN YOUR DOCUMENT CSS AND THE SPRY CSS.
It is because the <li> and <a> TAGS have been styled and therefore OVERRIDDEN THE SPRY CSS.
Use CLASS TAGS e.g. <li class="anyclass"> and <a class="anyclass">
and STOP USING THE <a> TAGS.
N.b. you may need to unstyle any <a> or other TAGS that conflict with the SPRY CSS. (However it's best to start over knowing that styling basic tags may affect the SPRY CSS).

Hyperlinks Are Not Functioning Correctly

I have a problem with the some of the hyperlinks in my
WebHelp Pro project not functioning correctly once the project is
compiled. What happens is that when I click on a hyperlink the text
doesn't change from blue to purple. Not all the hyperlinks on a
page are affected; some may work while others do not.
When I look at the HTML code, I see two different things
happening, and both things may not occur in the same code:
1) In some documents the code reads "a visited=0000ff." The
value should be 800080.
2) In other documents "font color=blue" is being added to the
HTML code for a particular hyperlink. Other hyperlink code in the
same document may be unaffected.
I have checked the font color in the editor to make sure it
was set to "automatic" before I created the hyperlink. I removed
the hyperlinks altogether, recompiled, then opened the document
back up and recreated the hyperlinks. The problem still exists.
Every document in my project is using the default.css style sheet.
I use the same paragraph style throughout the project, both on the
links that work correctly and those that do not.
Has anyone ever experienced this problem? And if so, do you
know the fix? I could manually edit the HTML code before publishing
my project, but that is just a bandaid fix.

The hyperlink color is controlled by the style sheet. I edit
my style sheets in a text editor. Make sure you clear your browser
history before testing the color changes.
FWIW, I like my links to stay blue--I usually have the color
change to purple in hover just to indicate that what is moused is
indeed a viable link.

Widgets not functioning correctly on tablet layout

I've noticed that my new ipad is showing my tablet layout of muse website, but some of the widgets are not functioning correctly. I have tried a few widgets for the tablet layout and it has resulted in problems.
Please take a look at www.littlesouth.com for an example of the current error.

Hi
I tried to check the site in tablet and it works fine.
Can you please elaborate as which specific widgets are not working ? and are they on home page or any particular page within the site.
Thanks,
Sanjit

Wifi is connected but not functioning correctly

Similar Messages

Maybe you are looking for