Wifi is connected to my Ipod and has great signal I just cannot load ANY webpages or get on the web at all. PLEASE HELP!
I have connected my Ipod to the wifi at my house. the ipod reads the signal and its great signal and has a check mark beside the name of the wifi connection as if it reads it, but absolutely nothing from the web loads. Sometimes it will just say "loading" but will never do anything, or it will say internet is not connected. I don't understand how to make this work. I have two computers that are using the same wifi and the connection is great i am having no trouble with the connection to other devices just the IPOD Touch, please help!
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off and then back on your router.
- On the iPod reset network settings: Settings>General>reset>Reset Network Settings
- The troubleshooting here:
Apple - Support - iPod touch - Wi-Fi
Similar Messages
-
i have reset my password and i dont have wifi to connect to my ipod and activate the steps in the i cloud process, now i want to know that will all my videos , photos and music will lost if i connect to my computer if storage and backup is in off mode
If iCloud Backup is set to Off in Settings>iCloud>Storage & Backup, it means that your iPod will not automatically back up to iCloud, but will automatically back up to your computer when you sync. The only way you would risk losing data is if you have never synced with iTunes before. If that's the case, you have to take special precautions to avoid losing data, as outlined in this user tip: https://discussions.apple.com/docs/DOC-3141.
-
I own the very first ipod and can no longer be updated or synced any suggestions to get it back up and running, has just decided to stop 2015
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
It could be that the battery has died -
I have downloaded a Maverick OS X 10.9.4 and installed it on my Mac from a USB, and i can't receive a Verification Code via SMS when setting up the iCloud Keychain. Please help.
Hello, Kutoz.
Thank you for visiting Apple Support Communities.
Here is some information that you may find helpful with this issue.
I'm not receiving the verification code via SMS.
Make sure that you have a strong cellular network connection on your phone.
Make sure that your phone number can receive SMS messages. You can do this by asking someone to send you a text message.
Make sure that the correct phone number is associated with your account:
iOS 7.0.3 or later: Tap Settings > iCloud > Account, then tap Keychain. Make sure the phone number under Verification Number is correct. If not, enter another phone number.
OS X Mavericks v10.9 or later: Choose Apple () > System Preferences. Click iCloud, then click Account Details. Make sure the phone number listed under Verification number is correct. If not, enter another phone number.
If you can't access a device that has iCloud Keychain enabled, you can contact Apple Support and verify your identity to get help completing iCloud Keychain setup.
Get help using iCloud Keychain
http://support.apple.com/kb/TS4644
Cheers,
Jason H. -
Yes my itunes account was disable because i got charged for unathorized purchases and due to that fact i cannot download any apps or get my music from icloud because my account is disable can you help me please,?
Try contacting the iTunes Store: http://www.apple.com/support/itunes/contact/
-
I ordered the IX500 Scan Snap through Amazon and received the incorrect Adobe Acrobat XI Standard disc in Windows format instead of for my Mac. I contacted Amazon and they suggested I contact Scan Snap who suggests I contact Adobe for the correct disc. Please help.
Fujitsu delivers only Adobe Acrobat for Windows, not Mac.
http://www.fujitsu.com/global/services/computing/peripheral/scanners/product/ix500/ -
i recently have ipad but before i sell it i made a back up of it and by an iphone when i put all the date on my iphone some files and software did not install is there anything i can do to recover the lost data? please help
I don't think you're on iOS 5, I think you're using iOS 6. That's the latest version.
Unless you've used iCloud to back up your documents, you won't be able to restore them. And for future reference, you don't have to uninstall Pages to update your iPad anymore. Sorry about this. -
I connected my iPad to wireless, now my MacBook will not download new mail (Charter) unless I turn the iPad off. Please help?
Is there anything in this link to help, particularly in the Troubleshooting section at the very end? http://www.myaccount.charter.com/customers/support.aspx?supportarticleid=2234
-
After the most recent software update my phone was restored to the factory settings and all of my photos were lost.... Is there any way to get them back??? PLEASE HELP!!!!!
Photos are meant to be uploaded to your computer for archival and storage. Certainly before doing something as major as a software update, you've done this, correct? In this case, your photos should be residing safely on your computer and you can just synch them back.
-
the new 8.2 update has left me with a red itunes logo and a charger end on the screen, i cannot use the phone at all, please help
Your phone is in recovery mode; connect it to a computer and use iTunes to restore it.
~Lyssa -
I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but after physically connecting iPAD with iMac with USB or via WiFi I still cannot find "phone button" under Device name on iTunes page. Please help! Thanks!
I have been creating a photo book using a lots of photographs on iPhoto, and then I took another photos by using new iPAD which I want to integrate with the original album/book on iMac. I was able to import them from iPAD's iPhoto to iMac's iPhoto. However I cannot import or transfer or sync anything from iMac's iPhoto to that of my iPAD.
So my iPhoto page on iPAD contains only 3 or 4 newly created albums, and no other info. That means no syncing....
I am supposed to be able to work on this project on either of these iPAD and iMac, correct?
I am puzzled. I appreciate for your advice and help.
Thank you!It doesn't appear under the iPad device on the left-hand sidebar of iTunes, you need to select the iPad device on the sidebar and then select the Photos tab on the right-hand side of iTunes e.g.
And then on the right-hand side : -
I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.
Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :) -
I bought a second hand ipod and reset it now i cant down load any apps at all
i bought a 2nd hand ipod and reset it now i cant download any apps it says i need ios 4.3, ios 5 i need an openGL ES
That message means you have a 2G iPod. Those can only go as high as iOS 4.2.1 and does not support Open GL ES.
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version. -
hiu i have an ipod which shares same itunes/icloud account as my iphone. i deleted the contacts off ipod and they have now gone off my phone too. anyone help, how can iget these back on my phone?
When you share an iCloud account between devices, any action you take on one device (such as deleting contacts) is synced to the others. (That's want iCloud does; syncs data across devices, keeping the data on the devices the same.)
The only way to recover them now is to try restoring your device to your last backup, or restore them from another backup source. -
My iphone 4, suddenly black out. I can't even connect to itunes, can't even turn it on. I have tried to Hold the home button and power button with 10 sec. but still can't work. Is that possible version problem? help please!
Help what? You broke it... Make an appointment at the genius bar of your local Apple Store. A replacement phone will cost you $149.
Maybe you are looking for
-
How do I find out how much memory can my macbook take?
I am trying to find out is my macbook can improve somehow performance (i am experiencing some slow downs when i have a number of applications open) by expanding the memory? now i have 2gb+2gb....can i go higher? thank you
-
Is it possible to cycle through the remote computers applications> (some special key command perhaps) as whenever I do CMD TAB at my end it cycles through my computers applications, not the remote computers applications.
-
Plant can no longer be changed
Whats the rationale of the error "Plant can no longer be changed." even when all purchase order history has been reversed Plant can no longer be changed Message no. MEPO087 Diagnosis The plant has been changed manually or rederived through input in a
-
Oracle 10.2.0.1 Standard Edition on Windows Server 2003 R2 SP2 German vers.
Hi, We got a "strange" error installing Oracle db on MS win Ser 2003. When the installation procedure created the database it stopped with Ora-604 and Ora-2248. My first thought was the language problem but I'm not sure. Below you'll see the trace.lo
-
SAP Authorization: unable to see change logs for role assignments
Hi , please do help us in this regards . When trying to find the changes update to certain role . We are unable to see that changes/ hope the changes are note gettng updated. we recive the message " NO CHAGE DOCUMENT FOUND TO MATCH SPECIFIED CRITERIA