Wifi is not working after update to ios5.0.1 in my iPhone 4s

Recently I update to new version of ios5 after that my wifi connectionis not working .can any one resolve this problem please?

I had the same issue before. But not any more....
Step1: Turn off your phone.
Step2: Unplug the router from supply.and turning off is different. So unplug it.
Step3: turn on router and phone back.
Try connecting now; which should work ....
This fixed my phone
Check it out.....

Similar Messages

  • The wifi does not work after update 5.1.1

    After I upgraded my Iphone 4 to IOS 5.1, the problem had wifi to connect to the wifi network is always seeking and never shows any network, my husband and I can connect does not mean it's my phone, he has not done the update.

    Thank you very much!! There are solutions for complex problems in this world because of persons like you!!

  • My external speakers are not working after updating my software through iTunes in my iPhone 4S

    Please help me out fast

    Restore your iPhone thoroughly. And restore it from backup.
    If not working,
    Take it to Apple store. They might replace the piece you have.

  • Playbook WiFi does not work after update

    Hi, my name is George and I am from Greece. I purchased recently a second hand Blackberry Playbook and the first thing I did was a software update. After the update the device booted normally but it couldn't detect any of WiFi (802.11b/g) access points that I have home and in my work (3 different hotspots in total). I searched on the support site for the problem and I saw that some others have faced the same issue and they fix it by doing a full wipe out (factory reset). So I tried the same with no success, now my device boots and I am unable to complete the first registration that can only be done via WiFi. I also tried to re-update the device several times using the latest Desktop Software, but the result is always the same no Wifi detected.
    I contacted the Greek subsidiary of the store that the device purchased and they told me that I must contact with RIM central branch because the RIM support policy about this product (Playbook) is that customer gets support directly from them. The store that the Playbook originally purchased is Expansys France and I have scanned the invoice as evidence of legal purchase and valid warranty.
    Please advice me how can I get support for the product because I sent an email and the reply tells me that I need to submit BlackBerry inquiry via approved channel Blackberry Playbook wifi problem. I don't know how to do this so if anyone can provide me with a link I will be grateful.
    Thank you very much.

    You can find the Playbook support numbers here.
    www.blackberry.com/playbook   click on support
    Finally, at the state you are now, find an open free hotspot (no password required, such as a Starbucks or McDonalds) to do this initial setup stage.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • WiFi iPhone 4S does not work after update iOS 6.0

    WiFi iPhone 4S does not work after update iOS 6.0

    This sounds more like a hardware issue.
    Have you checked that the dock connector port is not dirty?

  • HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

    my ipod 4G power button and volume button not working after updated to ios6.
    i also experience wifi issue. my ipod can't detect any wifi signal.
    so deppresing!
    what should i do?
    i can't put my ipod to sleep, can't adjust volume, can't shut off.
    should i update to ios 6.1?
    HELP

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

  • Iphone 4s Cellular data not working after updating to ios 6.0 .

    How to fix my cellular data, is not working after updating to IOS 6.0 ?

    Hey my wifi quit about a month ago,  and im running 5.1.1.  I thought the fix would be to download 6.0,  I guess not
    I have a 4s, first it was charging problems now this...argh!

  • VIBER is not working after updating android 4.3 on my Experia SP.Any idea or solution ?:-)

    Viber is not working after updating my Xperia SP to new Android 4.3There are totally confusing simptoms: I can not hear the other party,  the other party can not hear me , I can not answer the call even when I try to  or the other party can not answer my viber call even if they try to. CAN SOMEONE HELP or HAVE ANY IDEA :-)

    I also had problems with xperia sp after updating to 4.3 - phone was slow to an extent of being unusable. However, even before update (on firmware 4.1) I found the phone quite slow.I am very happy that I returned the phone to my carrier in exchange to nexus 5. When I got hold of it I really felt the change in responsivenes compared to sony. I cannot recommend it more - it has all the sony has + better responsivness, better screen, better battery life (yes, I have tested this), better camera minus bloatware. I got all of this for paying 50 eur more. That was my second and last phone from sony. After having sony xperia S for 1 week and returning it because of wifi problems and after trying xperia sp and again returning it because of crappily written firmware I really wonder what are people at sony thinking about.  People, don't you see that sony does not give a **bleep** about customer satisfaction after getting their money?  Of course, you can downgrade manually, but don't forget that this voids your warranty - staff at service centre would be more than glad to tell you you have just voided your warranty because you brought them phone that you had to downgrade because of crapilly written UPgrade!.  In addition to that downgrade means spending your a couple of hours of your precious time correcting mistakes of multinational corporation that simply does not give a **bleep**. Throw your sony into trash instead, and use those hours to earn money with which you can buy new phone that will actually work. 

  • My new iPad sound is not working after updating to ios 6.1

    My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

    Hi,
    I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
    I Have tried:
    - Updating to iOS 6.1.3
    -re starting the device
    -checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
    -going into general settings and reset all settings
    -the device reset several times (waiting until I saw the all important apple logo)
    -removing the last few apps I installed.
    Nothing at all has worked, please help!
    New iPadiPad

  • Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

  • HT1688 My Hot Spot does not work after update to 6.0.1.  Service is with ATT.  Apple says problem is with ATT, ATT says problem is with Apple.  Anyone else having this problem?

    My Hot Spot does not work after update to 6.0.1.  Any suggestions?

    Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
    so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
    so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

  • Click to activate does not work after update

    Click to activate plugin does not work after updating to version 23.0.1

    hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.

  • 3G is not working after updating to iOS 6.1

    My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the phone etc.
    With this kind of bugs in every update, Apple will no more be THE Apple.
    There are bugs which have not been fixed even in the subsequent updates. SMSs going blank being one of them.
    Miss you Sir Jobs.....

    I have since managed to sort mine out - when the phone was updated it wiped out the network settings. 
    I was able to reset them by manually putting the information in:
    Settings - General - Cellular - Cellular Data Network and then I put in the correct details for APN, username and Password in the relevant sections and now it works OK.
    Hopefully it will work for others too

  • Problem with new version 4.3.2 apps not working " after update to the new version "

    Problem with new version 4.3.2 apps not working " after update to the new version "
    i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

    Hi There
    Had the same problem as you. App would terminate when launched.
    Solution to working You Tube app:
    -Go to playstore
    - Uninstall app (it doesn't remove the app, only removes the update)
    - "Et Voila", working again.
    This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
    Hope it helped.
    Best Regards

  • My wi-fi on my iPhone 4S is not working after updating to ios7 and is a few weeks out of warranty, the Apple store wants me to pay £160 for a new one, are they joking?!

    My wi-fi on my iPhone 4S is not working after updating to ios7 which was working perfectly fine before. It is a few weeks out of warranty now and the Apple store wants me to pay £160 for a new one, are they joking?!

    Hi there Juicy Guava,
    You may find the troubleshooting steps in the article below helpful.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    -Griff W. 

Maybe you are looking for

  • Goods receipt / issue form

    Hi :    Is there any standard smartform for Goods receipt / Goods issue slip ? How to create a customizing form using smartforms when a material document is created and saved . Thx. Raghu

  • Error message in adapter engine, can u solve it

    Hi Gurus, I am facing problem when invoking webservice through XML Spy, its showing the following error: <b>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Database connection could n

  • Intercompany integration Solution 2.0 Internal Server Error

    Hi All I am using SAP 9.0 PL11. I installed Intercompany integration Solution 2.0. When I logon Intercompany Administration Console with B1i, and go to Setup--> Landscape the following error occur: SAP B1iP detected an error: Emitted HTTP-Code: 500 -

  • Auto code completion in JSC2 is less than JSC1 ?

    If you want to read a context param in Page1.java you can use: this.getExternalContext().getInitParameter("PARAM_NAME"); This works in JSC1 and JSC2. But if you put this. then a popup will list some available methods. In JSC1 this list includes getEx

  • CR2011 Crashes when trying to link tables

    Every time I create a new report in CR2011 and try to link tables from my iSeries Access ODBC, CR2011 freezes for about 5 seconds and shuts down.  I can create new reports using different databases like csv, xlsx, dbf, and mdb and it wont crash.  If