Wifi is not working with 6.1.3 iPad 2

Is anyone else having issues with 6.1.3 and the wifi connenction? I updated to the latest iOS on my iPad 2 and my iPhone 4S and I an now unable to connect to wifi at my house. I have not tried different wifi networks because I haven't left home yet but I am unable to connect here. Anyway have a suggestion? I tried a hard reset and I reset the network setting but that did not solve the problem. I can see the wifi networks but I cannot connect to them.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

ITunes WiFi Sync not working with iPhone 6, but works with iPad 1

I have an iPhone 6 and an iPad 1. The iPhone 6 runs iOS 8 and the iPad 1 runs iOS 5.
Yet, the iPad works fine using iTunes WiFi Sync with my Mac, while my iPhone never works with it. Whenever I forcibly make it sync by clicking on the device in iTunes and on Sync, it gets ejected/removed from iTunes. This doesn't happen with my iPad.
Is this a problem specific with the iPhone 6? Anyone know what I can do to fix it?
If I uncheck and re-check the WiFi Sync setting for my iPhone 6, then it syncs fine the first time again. But it doesn't work after that. So the device is definitely on the correct WiFi network at least.

It continues to be UNREAL how Apple will release iOS software without testing it. Yep. They BROKE WIFI SYNC. It no longer works on my iPhones or iPads either. UNREAL!!!!!!

ITunes wifi sync not working with iOS 7.1

After upating my (2) iPads and iPhone to iOS 7.1 none of these devices will sync with iTunes version 11.1.5 via wi-fi. Is there a fix for this?

It continues to be UNREAL how Apple will release iOS software without testing it. Yep. They BROKE WIFI SYNC. It no longer works on my iPhones or iPads either. UNREAL!!!!!!

Wifi Sync not working with Windows 7 64bit

Hi, having an issue with wifi sync for some reason. I am running Win 7 64bit, and I have tried everything on these forums with not luck. It is not my router because it works on another computer with no problem. I have enabled all ports, syncserver, etc. and nothing is working. I have done a complete uninstall, registry clean, and reinstall with no luck. I have noticed though on my computer when I check the box to allow my wifi sync to be enabled, all the box says is "Sync with this Iphone over....." It does not say "sync with this Iphone over wifi". The other computer I tried wifi sync with that worked said "sync with this Iphone over Wifi" Any thoughts on what would cause my itunes to not display the full message?

Forgot to mention I am using Itunes 10.6.0

Wifi direct not working with other brands

Is it not possible to to uae wifi direct with other brands like Samsung S3,5,6 or others? Because im trying to copy some huge file using wifi direct but it was unsuccessful.

I am able to connect to my tesco hudl and my MxQ tv box.

JoikuSpot Premium WiFi does not work with Safari

Hi,
My Nokia E-72 with JoikuSpot Premium WLAN Hotspot can connect to my iPad (OS 4.2.1)but I cant get on to internet with Safari or any app. Is it possible to set the iPad to "Computer–to-computer (ad-hoc) networks.?
Or what shall I do?

yes! something happen with wifi from ipod touch 2g, last week i restored it from itunes because i dont know why the wifi stopped working and then suddenly i couldnt find my wireless connection... but my laptop and other ones does... that problem happened once one month ago before i tried the update (it fix some errors somebody said ) but now the problems are usually more often, by just listening music while is horizontal and then trying to go vertical the music stops and goes to home (principal) and so with the internet... i bought my ipod in chicago in december 28 and now im in lima and im very dissapointed because when ipod touch 2g came out everything was fantastic, i have been using ipods since they came out to stores... and now i think that expending 265$ for this one was useless... im so bad
my connection to wifi has no answer, and now everyday i have an stop while listening music... im so so sad!

My iPhone 3S will not allow me to upgrade. I can't download any apps and when I connected my iPhone to iTunes and tried to upgrade it, it said it was already updated. On top of that, WiFi does not work with my iPhone. What do I do to fix this?

My dad got this iPhone for me a few months ago as a gift since I had a really awful phone before. The only thing is, I can't seem to upgrade it to the latest software without it telling me it's already updated to iOS 4 or something like that. (I would be able to give you the exact iOS version, but ever since connecting my iPhone to iTunes, my phone isn't responding so I can't check the settings or anything.) I can't download any apps (I get an error message saying the software on my phone is too old) and so I pretty much am extremely limited to what I can do on this phone. I'm very frustrated at this point and incredibly displeased with Apple's products.
If someone could please explain to me why this is happening and what I can do to fix it, I'd be extremely grateful.
Thanks.

What iPhone do you have? You can check in settings>>general>> about.
If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears.

Wifi suddenly not working with new networks?

This is already my second iPhone 5, since the last went into warranty because, ironically, of a wifi problem.
The other day, I was just minding my own business when I decided to try to connect to the local wifi of the place I was at the time, and it wouldn't connect. It would find the network, I would put the given password in and it just stayed there. The keyboard would disappear, like it normally would, but instead of returning to the wifi menu in the Setting app, it just stays there saying "Connecting to "X" network..." and nothing happens, unless I do either thing: if I tap the Home button and go back to Settings, it brings me back to the wifi menu, still unconnected; if I drag down Notification Center or bring up Control Center and bring them up/down again, a pop up shows up saying "Can't connect to the network". Apparently, this is to new networks, since when I got home, it automatically connected to my house's wifi. On the spot, I tried reseting everything from factory, and try to connect to another wifi nearby, since I had a copy of my phone on iTunes, and it worked, and when I came back to that same wifi, it didn't but I scratched the option that it was that router problem, because now I'm at my other apartment in the capital, and tried to connect to wifi (since I reseted everything and had no password saved automatically) and the same thing happened.
Help me out here, I'm going insane!

Turn off your router, wait ten seconds and turn it back on.

My iphone 4s wifi is not working with iball modem

i recently purchased the new iball modem (150M Wireless-N ADSL2 +Router), my phone fails to connect with wifi when i move away from the range & come again to range ,it get connected only either i restart my phone or modem but same disconnection problem occurs when i move out of range &comes in..

Hi, makeshmak.
Thank you for visiting Apple Support Communities.
Most likely the issue would be with the router settings or configuration. Wi-Fi routers need adjustments to settings periodically for optimized performance with the constant progression of wireless device technology. Below, I have included two articles. The first article will cover basic Wi-Fi troubleshooting regarding iOS device connection. The second article cover the recommended settings for current Wi-Fi access points. I also would make sure all firmware updates have been processed on the router side as well.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Cheers,
Jason H.

5Ghz Wifi is not working with Mountain Lion

When I upgraded to Mountain Lion, I lost my fast wifi connection. I checked my router and the settings but realized later that it was my mac.
Does anyone have this problem? Has anyone found the solution? Thanks

Mystery solved after I went to look at the detailed stuff in System Information :
en1:
Card Type: AirPort Extreme (0x14E4, 0xD6)
Firmware Version: Broadcom BCM43xx 1.0 (5.106.98.81.20)
MAC Address: <redacted>
Locale: ETSI
Country Code: TW
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless: Supported
AirDrop: Supported
Status: Connected
Note the supported wireless channels - the 5GHz channels in the UK are 36-48 which are not on the list. A firmware upgrade on my router appears to have changed the country code. Having done a bit of checking it appears OS X detects this using 802.11d and enables what it believes are the correct channels.
Having disabled the WiFi on the router, OS X now sees the 5GHz network first and allocates the correct channels :
en1:
Card Type: AirPort Extreme (0x14E4, 0xD6)
Firmware Version: Broadcom BCM43xx 1.0 (5.106.98.81.20)
MAC Address: <redacted>
Locale: ETSI
Country Code: GB
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
Wake On Wireless: Supported
AirDrop: Supported
Status: Connected
Right, I'm off to shout at the router manufacturer...

Bluethoot and Wifi is not working properly in my apple ipad air

Hello sir,
I m having apple ipad air with serial no: DM*****4HY and i m facing problm with my bluetooth and wifi. Both is not functioning properly. To solve this i have done Factory reset ang setting reset both. But even after doing this my problem of bluetooth and wifi didnt solved.
<Edited by Host>

should not post serial # or any other identifying info. Have asked the Hosts to remove.
meanwhile, verify iOS 7.1.2? Is the problem NEW? If so, what has happened recently regarding update/upgrade/new software?
CCC

FaceTime is not working with Apple ID on iPad.

I have reset the Apple ID and changed the password. Apple ID will NOT verify for either Messages or Face Time yet works to log in to all other services; apps, iCloud, etc.

I had the same problem after the update. I did a hard reset by holding down the off button and the home button at the same time and when the iPad rebooted, it was working again. I hope it works for you too.

Mavericks static ip doesn't on wifi does not work

MBA 2011
MAC OS 10.9.4
Wifi does not work with a static IP address.
My wifi access point does not have DHCP enabled, and there is no DHCP server on my network. The internet connection is NOT coming my wifi router.
Every machine on the network has a static ip address and manually configured DNS and GATEWAY to my correct gateway IP. This currently is working on this machine (windows 7), my ipad 2, my xperia phone, my windows xp box, my vista box, and even a virtual pc running windows server which is on my mac.
But the mac won't connect to the internet, or ping anything including the gateway ip address or any other machine on the ip address.
how can i get this mac to have a static ip address without having dhcp

Going to System Preferences -> Network, and selecting Wi-Fi in the left pane.... Questions:
. does the Status in the right pane show connected?
. if so, does the Network Name: reflect the name of the network you assume it should be connected to?
. if so, clicking on the Advanced... button and choosing the TCP/IP tab:
    . is the Configure IPv4 pulldown set to Manuallyh?
    . if so, have you entered in a valid router value (to mirror what you have set on the other working devices), and an IP address which you know is not already in use on the network?
    . if so, when you Ok out of this sheet panel, if you run /Applications/Utilities/Terminal and in that window type "ifconfig" can you find a configured network device with the address information you've entered (likely either en0 or en1)?
If all as anticipated by here:
. what message do you see in the terminal window when you do a ping to the access point's address?
. are you super-sure that address isn't already in use on the network (e.g on a device already on the network successfully and with your MBA's wifi turned off, try pinging the thought-to-be-free address to see if something answers back).

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

Wifi is not working with 6.1.3 iPad 2

Similar Messages

Maybe you are looking for