Wifi is spotty after updating to iOS 6

After updating my ipad3 to iOS 6.

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

  • Iphone 4s wifi grayed out after updating to ios 8.1.2

    iphone 4s users any body facing wifi grayed out issue after updating to ios 8.1.2?..please help me out to solve it.

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • I am facing problem with wifi and cellular after update  Apple iOS 8.0.2

    How can we resolve the issue with wifi and cellular reception after update the iOS 8.2 on iPhone 5s 32 GB

    Try some basic troubleshooting:
    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (C) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

  • Can't turn on WiFi or Bluetooth after updating to iOS 7.1.2

    I have an iPhone 4S which is only a couple weeks old. After updating to iOS 7.1.2, I can't turn on WiFi or Bluetooth. I have restarted, reset the network and reinstalled the system. It is still grayed out. Any suggestions?

    Try DFU mode
    http://osxdaily.com/2010/12/04/ipad-dfu-mode/
    http://www.imore.com/tip-put-iphone-ipad-dfu-mode
    http://www.tuaw.com/2011/05/25/iphone-101-what-is-dfu-mode-and-whats-the-differe nce-from-rec/

  • How do I get wifi to work after updating to ios 8.2?

    I have a iphone 5:  A 1429.
    wifi was working great with ios 8.1.3.
    I updated to ios 8.2.... and it says wifi is connected, but internet doesn't work for more than 2 minutes. I can turn it on and off airplane, and I can have up to 2 more minutes of internet.  I have 3 other devices on the network, and all of them work perfectly and have the internet, so the issue isn't the network.
    How can I get the internet to work on my phone?

    Try going to Settings, General, Reset, Reset Network Settings. Once done, go back to wifi in settings and enter the router's password.

  • Wifi Disabled? After updating my ios yesterday my handset became like thus. Pls help.

    Pls I need help. What should I do? I only update my ios yesterday and then this is what happen to my cellphone. Pls help me to resolve this problem.
    Thank you!

    How many times you reset the network settings? Because I already did for several times. And also put my phone on recovery mode. Nothing happen. so depressed..

  • Wifi calling broken after update to ios 8.1

    Hi,
    after I updated my iPhone 6 to ios 8.1 IO cannot enable the wifi calling option anymore. I'm getting the T-mobile icon and and error message "Sorry, your request could not be completed. Please try again later."
    Could somebody please help me with this?
    Thanks
    Fred

    I read theT Mobile reply.  It sort of gives answer.  The issue is that 8.1 requires that you have an E911 address that is same as WiFi site.  Your T mobile network validates the address and only then allows WiFi calling.  I assume it is a safety feature that Tmobile has not made clear.  I wasted a lot of time with unnecessary network resets before gleaning from response the real goal.  You cannot just have an E911 address.  It has to be current each time you access a new WiFi site.

  • WiFi not working after update to ios 5.0.1

    Original iPad - after restore and set up as new iPad with 5.0 setting bar on left side of screen say "No wifi". Wifi router is fine, all other devices are working, including 2 iPad2s. Have tried to restore and sync with iTunes twice with same results.  Any way to reset?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
     Cheers, Tom

  • IPad WiFi Greyed Out After Update To IOS 8.1!!!

    So I finally bit the bullet and upgraded my iPad from 7.1 to 8.1, but now I find that my wifi won't work!   So I've tried all the common things to try to get my wifi working again (resetting network settings; rebooting,  turning wifi networking off in privacy settings), but still no joy. The only thing I haven't tried yet is a full reset to factory What's going on Apple?  How can an OS update kill my wifi/hardware as others are saying???

    Hi shaun297,
    When you did the full factory reset, did you test the Wi-Fi before restoring from backup?  Please try that.
    And it does look like you did most of the steps in this article.
    iOS: Wi-Fi settings grayed out or dim - Apple Support
    Follow these steps to resolve the issue:
    Restart your iOS device.
    Make sure that airplane mode is off by tapping Settings > Airplane Mode.
    Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
    This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
    If you still can't turn Wi-Fi on, please  contact Apple for support and service options. If you can turn Wi-Fi on but are experiencing other issues with Wi-Fi, see  how to resolve those Wi-Fi issues.
    Take care,
    Nubz

  • IPad 2 WiFi Connection Loss After Update To iOS 4.3.2

    I've been watching with growing alarm the explosion of complaints of iPad 2 WiFi connectivity issues since the upgrade to iOS 4.3.2. My iPad is becoming almost unusable because of this issue, and this after flawless performance of the two iPad 2 32GB WiFi-only machines I bought 15 March 2011. All the suggested solutions I've read of do not solve the problem.
    This is very disturbing, and I hope Apple addresses this soon.

    I also left feed back.  I thought apple was also on this did not realize it was just user to user with change.  Thanks Carolyn!
    Russ
    Carolyn Samit wrote:
    Hi,
    Considering this us a user to user forum, not Apple, an alternative is to provide feedback to Apple here.
    http://www.apple.com/feedback/ipad.html
    Carolyn 

  • Anybody had luck with there wifi greyed out after update to IOS 7

    I've been trying all sorts to get my wifi working on my iphone 4s, been searching the internet to solutions, turning airplane mode on and reseting network settings - didn't work, reseting all settings - didn't work. Some have said that if you erase all content and data, basically a factory reset turning it back into what it was when you got it out the box works, but it doesn't, for starters it still doesn't go back to IOS 6 (what it would of been out the box), its still IOS 7, when you go into setting/general/about section and look at the wifi there is no wifi address. Has anybody had any luck with solving it, tried going through apple but they say because its out of warrenty i've got to pay for a repair, seen as its happened ever since putting IOS 7 on my phone, i see that as apple broke my phone, so they should fix it for free.

    This is almost always a hardware problem that requires repair or replacement of the phone. Downgrading to iOS 6 wouldn't help, even if you could.  There's a small chance that it can be fixed by following the suggestions  in this support article:
    iOS: Wi-Fi settings grayed out or dim
    FYI, do not try the "freezer" or "hairdryer" methods you may see posted.  At best they are temporary fixes and are very likely to cause additional damage to the phone...

  • Wifi Issue Persists after Updated to IOS 6.1.2

    Hey guys.
    My iphone 4s has been acting weird for over a week now. The wifi comes on for a few moments and then disappears and my phone cannot detect or list the wifi spots. I have tried resetting network connections and restoring my phone and updating. However, none of these work and I have updated my router firmware as well this morning and ran diagnose tests on my router but it's fine. My wifi works fine on my Ipod touch 4g. I have tried turning the airplane option on and off as well too on my phone but nothing works. Any other solutions or advice? Thank you!

    o.o; okay thanks ;o. hmm do you know if they charge if i take it to an apple store for an evaluation?
    Forgot to mention that my phone works when it's at school though. I don't have a problem connecting to the school's wifi just at home.

  • Am i the only one having a wifi gray out after updating to ios 8?

    Am i the only one???

    I'm sure you are not. With half a billion iOS devices in use, no matter what issue you have there's sure to be someone else who has it. But how does knowing that help you?
    See: iOS: Wi-Fi settings grayed out or dim for help.

  • Iphone 4s cannot auto connect to home wifi after updating to ios 6.1.2

    My iphone 4s will not auto connect to my home wifi after updating to IOS 6.1.2.  I can manually connect to my phone to wifi but it will get disconnect if I'mnot using the phone. Any way to reslove?

    Once the phone goes into sleep mode, it is supposed to auto disconnect from wifi to save battery. Are you saying that once you wake the phone up it will not auto connect at that time?
    Suggest you try and forget the network, then go in and try the reset network settings again and then try to rediscover the network and connect again. Have you tried to do a reset of the phone, but holding the sleep/wake and home buttons together until you see the Apple logo and then release?

  • Wifi iPad 3 charger stopped working after updating to iOS 6, help!

    Wifi iPad 3 charger stopped working after updating to iOS 6.  The little iPhone charger charges it very very slowly, but the charger gets really hot after a while.  I restored it and everything works but the charger.  It's only a few months old, should I try a new iPad wall charger block?

    Hi,
    I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
    Will monitor it and if no joy will go to a apple store
    Thanks

Maybe you are looking for

  • Zwaygi font not displaying in input fields (fine everywhere else)

    I am working on a two language website www.eprpinformation.org. The Myanmar version automatically changes the font family for body text to Zwaygi-One which work wonderfully well on IE, Chrome and Firefox. Except, that is, for input fields. For some r

  • Is it worth wasting an engineers time?? homehub fa...

    i think this is mainley for the mods when i renewd my bt broadband contract the operater said i dont need new equippent as i have a hh2 from my last 12mts contract, i said yeah thats fine as i dont like to change things that are not broken but i do h

  • Which paramter configures the timeout for rfc call (to R/3 ) from BPM

    hi froum, i have a scenario, with BPM, in which theres a synchronous send to a rcf Function Module in R/3, now, can u tell me which paramter decides the time out for this Sync call to rfc enabled Function Module in R/3, i mean which paramater in SXMB

  • CFLDAP & Expired password

    Hi, We have recently implmented CFLDAP authentication on one of our websites & discovered a new issue of expired passwords. I have been trying to read attrubutes like maxPwdAge or accountExpires but not able to read the values as I guesss they are fl

  • Mounting Windows shared disk - getting stuck; won't eject?

    I'm sharing the C: on my windows 2000 server machine, on the network. Most of the time I can mount and eject the volume just fine. However, sometimes it gets "stuck". Meaning, I can mount it once, then eject it, but when I try to mount it again, i ge