WIFI is working fine but can't download or update software. Way too slow...

Please help. I have called Optus and my line is fine but the download is so slow stating 50 hours at time.
I can't even do a software update.

What is your current connection via speedtest.net
Make sure DNS is set to auto (settings - general - network)
If on wifi try Ethernet

Similar Messages

  • Cisco Any Connect: Works fine but can't download file

    Hello! Here's my question:
    I search for documents in a database over a remote vpn using Cisco Any Connect. Works fine. I receive  a result, a list of documents that meet my criteria. I can either export to my  PC or open. If I try to export, I get a prompt asking where I would like to  place the file. I select the place (my desktop) and the window hangs after about  10% on the progress bar. If I try to open the document, a window opens but  hangs.
    Is there any way to resolve this, is the problem on my end of the remote  vpn? Is this an Any Connect issue?
    FYI: I am using IE8. I am using a Microsoft Windows Essentials firewall. (I was  using Norton before this, same issue.) I have also tried “Display All Websites in  Compability View” option in IE but no difference. The tool I am using is Documentum.
    Thanks,
    Mike

    One thing you should do is get rid of that Westell modem from verizon.  Its junk.  I replaced it with a DLink DSL modem and internet is faster.  Not that this suggestion solves your problem.

  • How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk.

    How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk. Want to use internal disk drive or USD flash drive.

    Try calling 1-800-676-2775.  Give the serial number and thy *may* still burn you new install disks designed just for the hrdware in your system (for a fee, something like $160 per disk).  *May* is only because they may not burn disks for Leopard anymore.
    If they do not burn them for you, you can buy Leopard disks off Amazon or eBay for about $200.
    Have you considered Snow Leopard?.  Those disks only cost $19 (single user) or $29 (5-user license) through Apple by calling 1-800-MY-APPLE.

  • TS3297 when I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' .  My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please?

    When I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' .  My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please? I have restored my ipod to factory settings and rest it.

    I also tried moving the date forward by a year and then moving it back to normal and it still doesn't work.  i can't find an automatic update of time zones on my itouch to turn this off.

  • Synchronization from SLD to LMDB is working fine, but data is not written to Software == Product Instance

    Dear Gurus,
    Synchronization from SLD to LMDB is working fine, but data is not written to Software ==> Product Instance section tab. What could be the problem ? Normally it should gather automatically, but pushed me to select manually lots of component ???
    Here is collecting is working fine !!!

    Hello Kemal,
    You have to ensure that your Technical System info is properly filled automatically.
    In LMDB you first create its Product System on LMDB Start Screen ProductSystem tab, after that please assign its respective Technical System. You probably need to run the Verification Check in order to confirm that your Product System has all Product Instances according on Technical System's Software Component Versions.
    Regards.
    Luis Roel

  • HT4061 i have cellular data internet connectivity (no wi-fi) but can't download and install software updates

    i have cellualr data internet connectivity (no wi-fi) but can't download and install software updates. how can i update the software?

    i have cellualr data internet connectivity (no wi-fi) but can't download and install software updates. how can i update the software?

  • TS1368 My wifi is working fine but I connect to the iTunes Store. Why is this and what else can I try please?

    I cannot connect to the iTunes Store but my wifi is working fine, what else can I try please?

    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • Autofill used to work fine, but after I downloaded 4.0.1, it stopped working. I will use IE until that feature is fixed.

    Google Autofill still shows in my toolbar, but it will not work any more since I downloaded the new version 4.0.1. It works fine on IE, so I will use that until it is fixed on FF. It is a very important feature for me, since I do a lot of web e-commerce. Please email me when it is fixed.

    Google Autofill still shows in my toolbar, but it will not work any more since I downloaded the new version 4.0.1. It works fine on IE, so I will use that until it is fixed on FF. It is a very important feature for me, since I do a lot of web e-commerce. Please email me when it is fixed.

  • Internet works fine, but can't see Airport Base Station w/ Airport Utility

    I'm running Windows XP Pro on a Dell Latitude laptop with linksys wireless-n PCMCIA card. I have a Cable Modem running to a Linksys router (cloning a MAC address), running to the Airport Extreme Base Station. Internet works fine (as I type this), but Airport Utility cannot see the Airport Base Station. This has happened repeatedly after hard reset and re-configuration of Airport Extreme Base Station.
    Do I have a bad piece of hardware?

    After doing a lot of research, this appears to be a pretty common problem for Windows users.
    The only thing that has worked for me is to go into the Airport Utility, and under the file menu, click on configure other. Then enter the LAN IP address of your airport extreme. I think the default is 10.0.1.1, although I have a separate router between my cable modem and my airport express providing IP addresses, so mine was different. It didn't always work at first, but now almost every time my base station disappears, if I do this it can be found again.

  • End routine Works fine but missing some records while updating to cube.

    Hi All
    I have an issue here... My End routine works fine and I even debugged by putting the breakpoint and It fetches data from dso. strangely when I run my DTP the load is successful but I can see some of the records are missing. but there is data in dso and also when i debug the code it fetches the values for particular fields.
    My requirement is I have a cube 'A' and under it DSO1 and  I need six more fields from dso2. Now I made a look up for these six fields in End routine. My routine works fine and so the DTP Is Green. My issue is I cant see these six fields updated for some of the records.
    PLZ put some light on it!!!!!!!!!!!!!!!!!

    Hi Naveen & Jaya
    Thanks for your quick response. Below is my code logic in end routine.
    METHOD end_routine.
    *=== Segments ===
        FIELD-SYMBOLS:
          <RESULT_FIELDS>    TYPE tys_TG_1.
        DATA:
          MONITOR_REC     TYPE rstmonitor.
    $$ begin of routine - insert your code only below this line        -
    ... "insert your code here
    data: lv_result_package like line of RESULT_PACKAGE,
          l_tabix type sy-tabix.
    loop at RESULT_PACKAGE into lv_RESULT_PACKAGE.
       l_tabix = sy-tabix.
    Update lot/decision attributes Lot/Decision ( ZQM_O04 ) DSO
       read table itab_qm_o04 into itab_qm_o04_wa
           with key insp_lot = lv_result_package-insp_lot.
       if sy-subrc = 0.
         lv_result_package-ivaluation = itab_qm_o04_wa-ivaluation.
         lv_result_package-catcode_ud = itab_qm_o04_wa-catcode_ud.
         lv_result_package-catgrp_ud = itab_qm_o04_wa-catgrp_ud.
         lv_result_package-/bic/zcattp_ud = itab_qm_o04_wa-/bic/zcattp_ud.
         lv_result_package-/b41/s_usuddate = itab_qm_o04_wa-/bic/gqmuddat.
         lv_result_package-/b41/s_usudcdate = itab_qm_o04_wa-/bic/gqmudcdt.
       endif.
       modify RESULT_PACKAGE FROM lv_RESULT_PACKAGE INDEX l_tabix.
    endloop.
    Well based on the insp_lot in ZQM_O03( DSO1) the logic above gets the six fields from ZQM_O04(DSO2) and feeds the cube.
    The Insp_lot has multiple records in DSO1 based on specific characteristic and so the cube. This Logic gets all these six fields
    from DSO2 which has single record per insp_lot and feeds the cube which has multiple records on insp_lot based on a specific characteristic. For some reason some of the records are not been updated to cube.
    waiting for your valuable response.....
    Thank You,
    Abhishek Yeachni

  • Why I can not download and update software from App store?

    When I want to install some software, only display"please wait",I cannot download and update anyone! Please,help me!!!!

    Hi maplefox, it would be  a great help to the communities if you were to include:
    1: the equipment you're using and any software you're currently running
    2; a brief synopsis of what apps or software you're trying to download.
    At the bottom of any community members' replies it will have a brief list of the equipment they have and whatever software they're running.
    Could you please be more concise with the details of what you are trying to do, and we are more than happy to help. Even more experienced members have problems from time to time.
    It would also help if you could take a screenshot to illustrate what you are experiencing.
    To do that, if you are using a keyboard, press 'Command', 'shift' and '4'. A 'crosshair' looking like a gunsight will appear on your screen. With your mouse, or trackpad, finger depressed, move the crosshair to the onscreen image, move the crosshair across (from the top left corner) and drag down (to the bottom right corner) until you've covered the area you want to show and just release your finger. the screen shot will appear on your screen. To show it as part of your query page, click on the camera icon and a window will appear asking you to choose an image or file. Click on the screen shot, and then click on 'Insert. Job done.

  • Installing wireless router, router works fine but can't configure the modem

    I'm configuring a wireless network for my parents, and I can't seem to get it set up right on my parents desktop with Windows XP SP2.  
    I bought a Linksys wireless router (WRT54GT) to set up a home network, and set that up quickly. It's not having any problems, but I can't set the modem into bridge mode. I'm connecting to DSL using a Westell Wirespeed modem (C90-36R516-01) that is pretty old, but I don't see why there is a problem. I went to the IP 192.168.1.1 in my browser while connected to only the modem to configure it, but the server always times out. When I plug in the router, it goes easily to the Linksys' configuration panel.
    The only thing I can think of it that I configured the router before switching to bridge mode.
    I tried getting around this problem by configuring the router to dial Verizon automatically using PPoE, but I don't know if it's actually working correctly, and it still asks me to dial up when I start Firefox. Other computers on the network see the router, but don't connect to the internet.

    One thing you should do is get rid of that Westell modem from verizon.  Its junk.  I replaced it with a DLink DSL modem and internet is faster.  Not that this suggestion solves your problem.

  • HT5313 why cant i connect to my sharp tv anymore via hdmi?? before the 10.7.5 update it worked fine, but now ever since i updated, it no longer finds my tv

    it doesnt work at all

    I had this problem with my Macbook Pro, and I was able to get HDMI working again by resetting my PRAM
    <https://support.apple.com/kb/PH4405>
    Reboot and hold Command-Option-P-R until you hear the startup sound twice.

  • I updated an app on my iPhone 4 and it has went onto the loading icon but has stalled, the phone works fine but I can't download anymore apps help?

    I updated an app on my iPhone 4 and it has went onto the loading icon but has stalled. The phone works fine but i cant download anymore! Anyone had this before

    The app store has been down at times throughout the day today.
    Just be patient and wait it out.

  • Can't download OS update file ...

    Ok ... New iPad 32GB WiFi only ... Trying to update to the newest OS and keep getting file corrupted message. Any help would be appreciated. Wifi works fine but can't seem to download the OS update file. Takes about 30 minutes or more, looks like its downloading but at the end says "file corrupt, disconnect and reconnect or try again later. Thanks everybody ...
    Dave

    Disabled the firewall, not sure if I can diable the antivirus software. Still have the same issue. Takes like 30 minutes to download the whole file, and then tells me "file is corrupt, disconnect and reconnect or try again later ...
    Thanks everybody ...
    Dave

Maybe you are looking for

  • Podcast Help! "The Feed has no Episodes" (Using Feeder)

    Hey All! I have seen this topic posted before but no within a user using the feeder software. I created a feed and podcast as per the manual but when I submit the URL (ttp://www.deadlyrhythms.com/podcasts/DnBForumTest.xml) i get the "The Feed has no

  • MBAM Enterprise Compliance Report not updating

    I've had MBAM going for a day or to, i can see computers in the computer compliance report if I type the test computers in; however, i dont see any computers under the Enterprise Compliance Report.  Is there a refresh cycle for this report and a way

  • How do I record audio of two people in remote locations?

    I work remote and the subject matter expert is in another state.  What is the best way for us to record a demo where you can here both of our voices?  I will have the software open on my computer and will be sharing my screen so she can see it.  I wi

  • About a app that i lost

    lasti connected my iphone 4 to my pc because i wanted to put some music on the iphone . When i opened the itunes an update appeared , so i update itunes . When i connected my iphone an itunes message appeared with an IOS update for the phone 6.0.1 .

  • All my contacts got wiped out......

    I have a 8530 and when I put in my password it did not work. Then it ask me to type in "blackberry". I did that then it ask me to put my password and I did. It finally worked but now it had me register all over again and i have no contacts now. I had