Wifi issue latest updates

After the update to Nokia Belle, my 3G and/or Wifi connection doesn’t work anymore. I get the error message: "Connection failed. Access denied". What should I do?
After the update to Nokia Belle you have to re-enter Wifi settings (network, security type, password, etc) or define your network as a new access point. There are also some problems where certain apps, for example "SPB Wireless monitor", are preventing your phone from accessing 3G and/or Wifi. To check this and solve your problem please do the following:
Check Nokia Store via www.nokia.com/store > "My stuff" if you have previously downloaded SPB Wireless monitor to your phone
If yes, please close Nokia Suite via File > Exit
Connect your phone to computer with a USB cable in mass storage mode (you can set this in the Notification bar via USB > mass storage)
Open Windows Explorer on your computer, go to [phone drive letter]:\Private and rename or delete these folders: 20042D1D and 101f7989
Close Windows Explorer, and unplug the USB cable after using the "safely remove hardware and reject media" function
Reboot your phone
Configure your wireless network, ie. enter accesspoints and passwords, or try to connect using your mobile data plan.
If you want to reinstall SPB Wireless monitor, go to Nokia store to redownload itAfter the update to Nokia Belle, there are problems with Wifi connection using LEAP authentication. The phone already tries to connect before I have time to fully enter the username/password. What should I do?
To solve this timeout problem, please edit the Wifi internet access point. You can find it via  via Menu>Settings>Connectivity>Settings>Network destinations. It will be under one of the destinations, most likely in Internet destinations. Then edit the access point via Internet access point > WLAN security settings > EAP Plugin Settings >  Eap-LEAP and set "Username" and "Password". Make also sure to set "Prompt password" to "No".
After the update to Nokia Belle, I cannot anymore connect to Internet with my phone.  I get the error message: “Connection failed. Access denied". What should I do?
The apps "SPB Wireless Monitor Lite" and "SPB Wireless Monitor" may be preventing your phone from accessing the internet, if they have been downloaded to your phone before the Nokia Belle update. If possible, please uninstall these apps before updating to Nokia Belle. If you are experiencing data connection problems after the Nokia Belle update, then please check if you had downloaded either of these apps earlier on your phone by browsing via your PC to Nokia Store: www.nokia.com/store  > "My stuff".  If you can see either of these apps, then please first try fix the problem by redownloading these apps on your phone:
Connect your phone with a USB cable to PC and ensure that you have Nokia Suite running
In Nokia Store, select the name of these apps under "My stuff" and then select "Download" > "Download on PC"
After the apps have been redownloaded, please reboot your phone and verify that you are able to browse the internet on your phone for example by opening www.nokia.com in your phone’s browser
If you still get the same error message or if you not able to re-install these apps from Nokia Store for some reason, only then follow the remaining steps to manually disable these apps
Close Nokia Suite via File > Exit

@navendukumar100
It might be a courtesy to credit source of much of this information:http://europe.nokia.com/find-products/nokia-belle-update/nokia-belle-update-faq
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • Software issues latest update March 2015

    since the latest update I now have a big problem.
    my wife recieved a call, it started rining, what also happened is my phone rang too and my iPad mini rang. All our devices display a call from the same person!!
    then when the call ended and the person left a message the call back 121 flashed on my wife's phone and you know  both my phone and iPad
    we have never had this problem before...

    On the iPod go to Settings>FaceTime and turn off iPhone Cellular Calls
    On the iPhones go to Settings>FaceTime>You can be reached at and uncheck the phone number for the other phone

  • Wifi issue post update of 8.3

    i noticed that since I upgtaded to 8.3 my phone 6 very erratically disconnect or doesn't recognise Wifi.
    Though my other equipments like Laptop, BB works absolutely fine. I twice restored my phone too.

    I have the same issue as well since I got my new iPhone6 last week. activated iPhone6 and updated iOS to 8.3. Does anyone have solution on this? or should I go to Apple tech support?
    I checked my home wifi, it's ok,because i have another iOS devices connected and no such wifi issue.

  • Can't use wifi after latest update

    iPhone 4S won't pick up wifi after I installed the latest update. Reset phone and nothing! Any ideas??

    6.1,  6.1.1,  6.1.2,  ...
    Nothing!
    I have the same problem and I CAN´T BELIEVE they didn´t solve it!!  It doesn´t seems to be apple in charge of Iphone's production & support anymore!! 

  • MBP WiFi issue after updating to 10.8.5

    I have a Macbook Pro late 2011 and used OS X 10.8.4. Last week installed Windows 7 with latest BootCamp. everythings was fine! Then I updated my Mac to newer version (10.8.5).
    Now WiFi just works on Windows and Mac does not find any WiFi networks.
    My WiFi security is WPA2.
    Any one know how do I solve this issue?
    Regards,

    Back up all data, then reinstall the OS. You don't need to erase the startup volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it.

  • Ios 8.x wifi issue after update

    I have been having intermittent wifi connectivity issues with my apple devices since upgrading to ios 8.x. I've subsequently updated to most recent version 8.0.2 but alas still having the issues of intermittent wifi connectivity issues (wifi works then drops without reason).
    The baseline critical information is:
    -Cable modem with direct internet connectivity of 20Mbps down and 2Mbps up.
    -Home netgear WNDR3700v3 running latest version of firmware V1.0.0.38_1.0.31.
    -Apple 5s, 5c, 5 and iPad min, iPad 2 - iphones running latest issue of IOS but ipads intentionally left back to prior versions for purpose of testing.
    -Forced DNS servers to google servers 8.8.8.8 and 8.8.4.4
    -Security perimeter policies in place prevent external unwarranted proxy attacks, pin hole attacks, etc. No outbound (internal to external) flows are restricted and only established flows (external to internal) are permitted.
    Problem statement:
    -Wifi will drop on all iphones using current version of ios causing devices to fall back to LTE or 3g.
    -Reboot of netgear required to reset wireless settings for internal device usage.
    -Cable modem never loses connection to internet and plugging direct into cable modem shows continued network connectivity.
    -These issues never were experienced prior to updating to IOS 8.x
    Question:
    It would appear there is a wifi ios issue. Does anyone have any suggestions ? There are no firmware updates available for netgear given its age (2 years old).
    I would prefer to not downgrade ios devices if applicable.

    Worth taking a look here:
    Why does iOS 8.0.2 not resolve the issue of WiFi connectivity with iOS 8 and the new iPhone 6?
    22 pages and counting...

  • Cant connect to wifi after latest update

    The latest iOS7 update has killed my wifi connection. The system says it connected but it cannot be used??

    Hey there gjcrewe,
    It sounds like your wifi is connected on your iPhone, but you cannot get to the internet. I want to recommend these troubleshooting steps from the article named:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    If the above does not fix the issue, I would next try these steps:
    Unable to access the Internet while connected to Wi-Fi
    If you're using a public or commercial network, you may need to log in or subscribe.
    Check to see if you have a self-assigned IP address:
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected and tap .
    If your IP address is 169.254.xxx.xxx, you may not be able to access the Internet.
    If you do not have a self-assigned IP address, see if other Wi-Fi devices on your network have Internet access.
    If they do not, consult with your network administrator or ISP for further assistance.
    If they do, reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • WiFi issues since updating to Mavericks

    Having recently bought my MacBook Air, it came with Mountain Lion as the preinstalled OS. I decided to update to Mavericks last night, and installed from the Mac App Store. The install was obviously simple, but it has thrown up an issue that I did not anticipate.
    I am able to access WiFi at all times, but only an active internet connection whilst in the Recovery mode. Whilst running Mountain Lion I had no issues, and my router settings have not changed in this time. I have done one reinstall of Mavericks whilst in Recovery mode to see if that would fix the issue, but still no joy.
    Not exactly the experience I had hoped for, and at the moment I am almost ready to throw in the towel. I know this issue is not with my router or network config. It is the MacBook Air, AirPort is an extremely poor way to connect to a wireless network as far as I am concerned.
    Any help is much appreciated. I was thinking that maybe a complete shutdown might fix this issue; so I will try that now and see if a full system reboot will jog the MacBook into connecting to the web, rather than stalling on the WiFi network and going no further.

    Hi damienfromhowden!
    I have a few articles here for you that can help you troubleshoot this Wi-Fi issue:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    About Wireless Diagnostics
    http://support.apple.com/kb/HT5606
    Wi-Fi Quick Assist
    http://support.apple.com/kb/ht1145
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • HT201210 no b/t or wifi after latest update on 4s?

    I have a Iphone 5 and after update everything OK.
    My wife has a 4s and after same update her bluettoth and wifi have ceased to function.
    B/T searches endlessly (spinning star) but wifi is "greyed" out and doesn't respond to even turn wifi on.
    Have tried restore after backing everything up but still no go.
    Any suggestions apart from dropping it in to Apple as this is 600k's out of my way.
    Thanks

    I have a Iphone 5 and after update everything OK.
    My wife has a 4s and after same update her bluettoth and wifi have ceased to function.
    B/T searches endlessly (spinning star) but wifi is "greyed" out and doesn't respond to even turn wifi on.
    Have tried restore after backing everything up but still no go.
    Any suggestions apart from dropping it in to Apple as this is 600k's out of my way.
    Thanks

  • IMac 27" wifi issue after update to OS X 10.7.4

    Hi all,
    i can't access to wifi after update to OS X 10.7.4.
    Anybody has remedy to this problem?
    Is this software or hardware related problem?
    Hope to get a reply soon.
    Thanks.

    Hi Thomas, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
    Or whatever Interface you use.

  • Wifi issues after update to ios4

    Hi all,
    Since updating to os4, I've been having problems with the wifi on my iphone.
    If will connect to my home network fine, but it refuses to use the wifi connection. Checking everything in settings, it all seems fine, it says connected with good strength etc.
    But it just doesnt use wifi.
    Oddly, the only time the wifi symbol comes up, is in call, which im finding a bit odd. But as soon as I end the call, the wifi symbol disapears and goes back to gprs.
    I've rebooted the phone several times, got it to forget wireless networks and set it all up again, reset the network setting, and recently restored and update to os 4.0.2 with no luck.
    Anyone got any ideas?

    Any problems connecting to any other wi-fi network?
    If the same with any other wi-fi network and no change after resetting network settings on your iPhone and after restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup, more than likely your iPhone has a hardware problem.
    You can contact AppleCare or make an appointment at an Apple store if there is one nearby.

  • Wifi Issues after updating to Mavericks

    After updating to Mavericks, the wifi on my 2011 Macbook Air started to drop a few minutes after connection. I performed wireless diagnostics, and here are the logs generated by the program.
    First is the monitoring log:
    # --- Monitor Test Cases
    11/11/13 19:39:01.8910           No LAN Connectivity
    11/11/13 19:39:01.8910           LAN: WiFi interface can ping IPv4 router 192.168.1.1 . . . fail
    # --- Monitor Summary
    11/11/13 19:39:08.0520           LAN Connectivity Failure

    Might be corrupted network preferences ...
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    /Library/Preferences/SystemConfiguration
    Click Go then move all the files in the SystemConfiguration folder to the Trash.
    Turn off the base station for about ten seconds then turn it back on.
    See if that makes a difference.
    Your Mac will generate a new SystemConfiguration folder for you.
    See if that helps the Wi-Fi connection.

  • BT Wifi App (Latest Update)

    I updated the App an followed instructions to insall it when i get to the part were it says i have to install  a connection profile i input the correct details but i get this error
    Install Connection Profile
    Sorry, there was a problem downloading your auto connect profile, please try again later
    Any one got any ideas as to why this is happening ?

    Stephanie has posted an explanation here.
    Dean
    BTCare Community Mod
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Ipad 2 wifi issues since updating to ios version 4.3.3..

    I have tried everything to remedy this on my own but to no avail.  I am picking up a great signal strength from my wifi on my ipad 2, but I just don't seem to get enough 'juice' to load a webpage.  I seem to be able to check email every now and then....this is incredibly frustrating.  This is my first Apple product that has wifi (have had ipods for a while) and I am not liking this at all.  I use my ipad 2 for everything now, I need help!

    Glad/sad to see it's not just me.  Hopefull they will publish a fix for the last fixsoon.  I've tried all the remedies on CultoOfMac, to no avail either.
    iPad1 and iPhone4 both TKO'ed at this point.  Very sad to see it happen in the middle of a session or appstore download!!!
    Tom

  • Wifi issue since update

    Since I updated to 2.1 I can no longer connect to a hot spot that I used to be able to.anyone else have this or know of a fix?cheers

    You can try selecting the network and then select Forget this Network.
    This will erase the network settings from your iPhone.
    Try joining the network again as a new network.

Maybe you are looking for

  • How can I use Automator to extract specific Data from a text file?

    I have several hundred text files that contain a bunch of information. I only need six values from each file and ideally I need them as columns in an excel file. How can I use Automator to extract specific Data from the text files and either create a

  • How to manage linked files with multiple designers?

    Hi, I work at a small company with multiple designers (5 of us) where 3 of us work remotely. We use dropbox to manage our files so that everyone has access--we keep client files in specific folders and stock media in a shared folder. Currently whenev

  • Copy data pages from one workspace to another in JDev 10.1.2

    Hi: I have a workspace-1 that has a model and viewcontroller projects. No, I created another wrokspace-2. I created the same model. When I tried to copy the data pages from workspace-1 to workspace-2, it didn't allow me. Can't this be done? Have I to

  • DB Autogrowth settings - Service Applications and content DBs

    Hi - is there any documentation out there that provides specifics for the initial size and autogrowth settings for the SP2013 service application databases? I'm aware that the content DBs will vary and thus impossible to define settings except to not

  • Folio Table

    Anyone knows what is stored in the CPDARHIVEDLINKS. I have some error when i save folio that there is Primary key voilation. When i delete the rows in this tabele first save of folio goes well but when i try to put another document inside there is er