Wifi issues anyone else????? :/

my iphone 5s isnt connecting to my 5ghz wifi anyymore its saying unable to connect why is this happening anyone else having this issue???
i already restored my iphone and still dosent work

I'm not having the issue, but thanks for asking.

Similar Messages

My iphone6 plus wont imessage unless I'm connected to wifi. Anyone else have this issue?

my iphone6 plus wont imessage if I'm not connected to wifi. I also cannot use safari or siri without wifi. Anyone else have this problem?

Are you vaguely trying to say that you have no internet unless you are connected to wifi
as in you get no 3G/4G connection for data

TS1559 when my iphone is on WIFI and I lock it, it turns the 3g on, when I unlock it, it turns the WIFI on, anyone else?

when my iphone is on WIFI and I lock it, it turns the 3g on, when I unlock it, it turns the WIFI on, anyone else?

If you forgot your passcode, you have to use recovery mode to restore
http://support.apple.com/kb/HT1808

Cant open web pages when connected to the internet via Telstra's Pre Paid WiFi has anyone else had the same issues works fine with BigPond WiFi

Cant open web pages when connected to the internet via Telstra's Pre Paid WiFi (this connection is working on other devices) has anyone else had the same issues, works fine with BigPond Wifi

and now, when i tried to check again my network preference below the airport tab is showing a message that
"my airport does not have an IP address and cannot connect to the internet!"
then after seconds it will goes back to the first message that
"airport has the self assigned IP address etc....."
i don't know whats going on now!
airport tab is not showing green color anyway! i'ts always in yellow!
i tried turning it on and off but nothing happen! HEEELLLLPP!!!!

Problems connecting WIFI. Anyone else?

Just bought my Droid2 today and think its great but I can't link it to my home router. My network is private and I'm entering the passphrase but the Droid says disconnected. It easily connects to my neighbors weak public network. I didn't have this issue with my BB Storm2. I called tech support and they had to put me thru to Motorola tech support but their wait time is an hour. I am still waiting for a callback and its been 2 hours.
Anyone else having an issue? I have a Linksys set on WPA2.

I have the Microtech thru Qwest and I get a weak to good signal with the G series router .
I just tried different #'s (as in the last of the ip address) and finally got a better one.
I acually put it in Air Plane mode and just ran WiFi with the low signal, and it seemed faster then vzw's network.

IMac Sleep issues -- anyone else ??

I noticed there was some kind of recall for sleep/wake-up issues with the MacBook (pro?) but not the iMac. I've been having the following go on since I got my iMac about a month ago:
Intermittently wakes up from sleep -- sometimes when I'm in the same room reading, sometimes if I put it to sleep at night it is on when I get up in the morning.
Often, but not always, it wakes up when I pick up the phone to make a call. The system is connected (through an Apple USB modem) to a two-input phone jack, shared with my phone.
Sometimes when I put it to sleep the screen just dims and the system locks up, necessitating a hard power-off.
Sometimes when the system is asleep, I am unable to wake it, necessitating a hard power-off.
I plan on bringing it in to the Apple Store one of these days, but I'm curious if anyone else is having similar problems...

HI there,
Try this first before taking in, reset the SMC on your machine:
http://docs.info.apple.com/article.html?artnum=303446
Plus, check to see if you have the latest SMC FirmWare update:
http://docs.info.apple.com/article.html?artnum=303725
Read but proceed with caution! Have a nice day...
Rick
iMac G5 iSight 20" - 30G iPOD in Slimming Black - Mac OS X (10.4.7) - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

After updating to 4.3.2 wifi fails, anyone else?

I've updated my iphone 3gs last weekend to fw 4.3.2 and sincethen my wifi isnt able to work anymore.
Since i live in an area that doesn't support 3G connectivity, it feels like i'm thrown back in time where there was no (fast) mobile internet, really annoying...
Does anyone else have this problem, and is there an solution?

Many people have the problem, that after upgrading their iphone to 4.3.2 or 4.3.3. the WiFi is not working. In my setting this was the problem and could be solved:
The iOS 4.3.2 and 4.3.3 for iphone is not compatible with the firmware 7.5.2 for apple airport extreme and time capsule. If your WiFi router is an apple airport with the newest firmware 7.5.2 an iphone with the iOS 4.3.1 connects without problems but after the firmware undate tu 4.3.2 or 4.3.3 it will not be able to detect and connect to the WiFi network.
Solution Because the iphone firmware can not be downgraded, the airport firmware has to be downgraded
1) Make sure that the settings of your Airport Extreme are in mixed a/b/n mode
2) Open Airport Utility
3) Select Upload Firmware from the BaseStation menu
4) If you current version is 7.5.2, click Upload Firmware
5) Select 7.5.1 from the pop up menu
6) Restore Firmware
Now the WiFi network is detected and connected as before upgrading the iphone to 4.3.3.
The solution was found here https://discussions.apple.com/message/15170990#15170990

New Kensington Pilotboard wireless desktop - numerous issues Anyone else??

I just got a G4 500 AGP and also picked up a new Kensington Pilot Board wireless desktop on sale at Compxxx and it has given me fits and was wondering if anyone else had similar issues??
Here is what I have going on :
1) Random keys not responding at all mostly towards right side of keyboard
2) MASSIVE system slowdown which seemed to go away after going back to a generic keyboard/mouse that are wired
3) Horrible lag when typing and I am not a fast typer by ANY standards
I put 2 new and fresh sets of batteries in both keyboard and mouse and re-synched about 10 times and restarted several times and un-installed and re-installed software as well with same problems persisting. Is this just a junk product or did I get a lemon??

Tim, welcome, I have the same keyboard and it work just fine. And yes, new batteries really make a huge difference. Try Repairing Permissions and see if that solves the issue. Also if the USB cable is plug into a PCI card move it to one of the computer outlets and try moving the censor to a new location.
The tracking speed of the mouse can be adjusted but this should not effect the OS performance at all.
Joe
Power Mac G4 Gigabit Ethernet Mac OS X (10.3.9) 1.5 GB Ram, ENCORE/ST G4, Tempo SATA, ATI Radeon 9000, Adaptec 4000

Lacie external FW Issue, anyone else?

Just purchased a 160g external firewire Lacie "F A Porsche" dirve. The drive will not mount to any of my G4s (Dual 800 + PowerBook). Dual 800 10.4.8, Laptop 10.4.7.
I have verified the Lacie mounts properly to an iMac G5, a single processor Intel and a dual core Intel.
Lacie tech support suggested I try their D2. Anyone else had issues with this dirve, comments on the D2?
Thanks in advance,
Chris

The topic of dead FW ports shows up from time to time on Macintouch and other forums. The very (VERY) short answer seems to be that although FW is SUPPOSED to hot swapable, you do so at your peril. FW ports on a variety of models seem to go dead sometimes and, as you have discovered, the only solution (other than a motherboard swap) is a PCI card.
I have a first generation AGP Sawtooth, have used the FW ports for years (but never to swap drives in and out) and my ports are still working.
I probably just guaranteed their failure...
G4

AEBS disconnecting/dropping iMac connection issues, anyone else?

my intel iMac 20" keeps dropping the wireless connection to my Airport. I have my MacBook Pro right beside it and its a solid connection. I called Apple tech support today, but they are closed due to Holiday in Canada.
Anyone else having these issues with the new iMac's. So many problems lately, wireless, freezing etc.. I don't know what to do. I reformatted my iMac to see if that new update 1.1 was the issue, but it still disconnects.
THanks

Tried the first several times.
Unistalling CC Desktop didn't help either.
Tried viewing the install logs as per this page:
http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
Nothing.

Motion 3 Export Issues, Anyone Else?

I've run into two issues after the 3.0.1 udpate...
1. In the export dialog, when I click on the "Options..." button to tweak the export settings, nothing happens, I don't get the expanded dialog... this is happening on two of my machines.
2. Using the "Export using Compressor..." option from the File menu doesn't do anything... doesn't launch Compressor, nothing. And again, this is happening on two of my machines, one with a brand new hard drive, fresh system install and brand new FCPS2 install.
Anyone else have these issues?
I also openend a project I started in 3.0.0 and now the output has bizarre random lines with strange colorings all over it... talk about frustrating. The exact project rendered before the update renders perfectly fine.

I'm having the exact same problem right now. Exporting with compressor actually makes my system crash - before the upgrade everything was working perfectly. If I find anything out I'll be sure to post....

BT Infinity HTTPS connection issues- anyone else?

Hi all.
Any advice would be greatly appreciated.
I have been having considerable problems with HTTPS sites over the past few months - timing out, unable to make payments online with ClickSafe - Lloyds Bank, Natwest, NEXT, National Lottery. Some HTTPS sites load eventually but usually very very slowly or time out.
This issue is across all my devices - Macbook Pro, iPad Air, Samsung Tablet, Windows 8 Laptop, x3 iPhone 5.
If I switch WiFi off on my iPhone I can make payments over the mobile phone network fine but as soon as I switch WiFi on the problems occur again. I took my Laptop to a friends house and used their TalkTalk Broadband and no issues, all worked fine.
I have had 2 HH4 and now a HH5 and the problem still occurs.
I have Changed numerous settings, undertaken numerous reboots and complete resets to no avail.
I have enabled firewalls and disabled firewalls, changed MTU and numerous other possible fixes, but again none have worked.
I have paid for BT Tech Expert support who have been very helpful and always called back when they have said they would but they do not know what the problem is and are still working on it. Next call on Monday night.
I found this very long thread starting in 2011 and ending in February 2013, where BT customers were experiencing the exact same problems in the South West of England and it turned out to be a network issue that was resolved but it does not explain how it was resolved!
https://community.bt.com/t5/BT-Infinity-Speed-Connection/BT-Infinity-and-https-connection-issues/td-...
I am in Newcastle upon Tyne and would be grateful if anyone could let me know if they are having the similar problems?
Thanks for your help.
BT Infinity 2 - 75/16 Mbs

To make sure that BT web help is disabled, look here.
http://preferences.webaddresshelp.bt.com/selfcare/
To try changing DNS server on your Windows 8 laptop, see this Microsoft note.
http://answers.microsoft.com/en-us/windows/wiki/windows8_1-networking/how-to-change-ipv4-dns-server-...
You can use 8.8.8.8 as they suggest, as that is Google public DNS.
If that fixes the problem on the laptop, it would point to a problem with BTs DNS servers.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

FireWire Issues - anyone else?

Have a PB G4, 1.67, with an Apple-repaired logic board [from Nov 08]. After latest Security updates, I have had trouble connecting either 800 or 400 FW drives. I've tried them on an iMac and iBook; both work. Tried different cables, three different drives [2 OCW, one Verbatim]. Nothing works. Wiggled cables. Used both bus and external power.
HELP please. I don't want to spend another $350 [plus postage from UK via APO] to fix this a third time [was a refurb, used from PowerMax, they looked at logicboard once, and then I used Apple's fix it service]. The Apple repair warranty expired in Feb 09.
I might try an $80 cardbus FW800/400 if I can find one still.
Thanks in advance.

Frustrating trying to get it to work .... You can zap the PRAM as well as reset the PMU anytime. At this point, if you haven't go ahead and do the PRAM and might as well do the PMU again. Reset PRAM. Note the effects are immediate, there's no advantage to waiting overnight:
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
It sounds like you may have had hard drive issues that Drive Genius fixed for you. For comparison, did you run the Disk Utility disk repair after Drive Genius fixed the hard drive .. just to see if Disk Utility gives the drive a clean bill of health?
When you ran the Apple hardware test, did you run the extended test? Do you have either of the TechTool programs available? They do similar testing to the Apple hardware test, it would be interesting to see if they also say the hardware is OK.
You've reloaded the operating system a couple of times. Did you use the combo update to update to 10.4.11? I prefer that to letting Software Update make the updates, as sometimes it doesn't update correctly. Repair disk permissions before and after the update, too. Then run software update to pick up any other required updates.
You've, by this time, reset PRAM and PMU, I assume the PRAM reset didn't change anything? If so, sorry, but I don't know what else you can do. At this point, I'd take it to a genius at the Apple store, and get their opinion.
I didn't address sleep as I think you need to resolve the Firewire issue first, then see if there is a sleep problem.

Can't download apps or buy in app currency...login/error issues, anyone else?.

Tried to reset password, update cc and still can't login to get apps or in app game currency, anybody else having trouble today?

Mybe a a bad iPod but first try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

IMac 27" -Photoshop CS3/CS4 redraw issues- anyone else?

Hello Forum,
I am a pro photographer.
I do have the new 27", 3.06Gh, with 10.6.2.1
When I start up CS3 or CS4, open a picture at 100%,
and scroll within it, the borders show the "chess" pattern, and I have redraw issues.
Any help would be appreciated.
Thank You

OK, sorry I didn´t follow this thread the last weeks.
This has to change now
I´m on 10.4.3.
It didn´t bring ANY improvement.
I have all updates installed, all firmware upgrades.
My videocard is the Radeon HD 4670.
Screen redraw is an absolute pain.
For example, if I have a lasso istalled, or work on a layer I see no refresh, or lagged, sometimes the picture reverts to a previous state, but only in displaying the data.Once I zoom in, I can force a correct display.

Wifi issues anyone else????? :/

Similar Messages

Maybe you are looking for