WiFi (Key) stopped working after upgrade to Windows 10

I thought I would post this on the forum for those who are having the same problem because help for this issue is few and far between compared to the number of pleas for assistance from HP owners. When I upgraded to Windows 10 on my Pavilion, the WiFi stopped working and I could not turn it on using the hot key (F12). I searched for answers and worked hours trying to solve it until I came upon the only suggestion that worked for me: I had to disable fast boot (power options, change what the buttons do, "change settings that are currently unavailable" (?!?)) , so I could get into the bios and then I went into the bios by pressing f10 during boot. Reset them to defaults. (Changed from default back to what I wanted) saved and the wifi button turned white after pressing during windows 10 boot up. EDIT: If it does not turn on right away, try turning it on through the wifi settings. I hope this can help a few, who like me, struggled endlessly for a problem that few HP mods seem to be responding to. Cheers.

Satellite S55t-A5389 (PSKK2U-028002)
Put your part number (PSKK2U-028002) in here. It will take you to a page that has 12 Windows 10-compatible downloads. Unfortunately, a WiFi driver is not one of them.
But there is this:
Your selected Toshiba PC is supported for upgrade to Windows 10, but not all of the software for the upgrade is available at this time. Additional software will be posted here when it is ready. Please check back at a later time.

Similar Messages

Re: NB200-134 - FN key not working after upgrade to Windows 7 Ultimate

My FN keys of NB200-134 is not working after upgrading from Windows 7 starter to Windows 7 ultimate. I tried installing every drivers found on Toshiba website for my lappy but still it does not work.
Help please

Hi asalamk,
The FN keys are controlled by Value Added Package and Flash Cards Support Utility. I think you have forgotten to install these tools
You should check the Toshiba page again and download both tools. Start with installation of Value Added Package then restart your notebook. After this install Flash Cards Support Utility. Once again restart and all FN keys should work properly now.

Keyboard wireless key not working after upgrading to windows 8.1

Hello,
I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
Kindly suggest me some solution.
Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
Thanks.

Hi @Jayesh_Bhadja ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
Make sure all your updates have been completed. I would try restarting my Notebook a few times.
If that does not help I would uninstall the keyboard from the Device manager.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Hi,catalyst control centre has stopped working after upgrading to windows 8 .

Hi,
i have a hp envy-6 notebook pc(Product number: B4P24PA#ACJ,Serial number: [Personal Information Removed] , which comes with windows 7 home basic! after upgrading to Windows 8 Pro 64-bit operating system ,my catalyst control centre ,host application has stopped workiing .
i have tried almost everything i could do but the problem still persists
on every time restarting pc it displays the above error message.
regards
abhishek rao

Hi,
Have you checked in the Device Manager to see if all drivers are installed since upgrading? (look for yellow exclamation points)
Uninstall the AMD driver and catalyst control center. Install the version located in the download section of the web support portal for your sleekbook.It will install both driver (intel and AMD) and also switchable graphics capability if it previously existed.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Keyboard stopped working after upgrading to Windows 10

I just upgraded my HP Pavilion X2 to Windows 10 and the keyboard stopped working. Is there an update from HP that can correct this issue?

, Hello and thanks for posting on the HP support forums. The only option you have at the moment is to run the windows update troubleshooter and run any update recommended or optional. If that does not fix it then you will need to roll back to the original supported operating system the x2 was built to run on. Here is the link for the troubleshooter. http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter Please let me know how things go. Thanks again for the post and have a great day.

Media Keys stopped working after upgrading to Yosemite. Tried several things, what to do?

I have a Late 2013 Mac Book Pro. After upgrading to Yosemite, my media keys (F7-F12) seemed to be working funny. They worked sometimes but not during others. A simple web search seems to indicate that Chrome is the culprit which I believe is the case. However, the instructions to disable Chrome from messing with the media keys does not seem to work (as my version of Chrome does not seem to have preferences to allow me to turn off its access to the function keys). The make things weirder, when System Preferences > Keyboard has the "Function Keys" option turned on, the media keys do not work (in fact F11 clears the screen to show the desktop). And when the option is turned off, the media keys work normally as though they are turned on. Additionally, when F11 and F12 are pressed (to lower/raise the volume), it no longer plays "test sound clicks" to indicate the changed volume. I have tried a PRAM reset to no avail.
Any help is appriciated.

For my hard drive that doesn't show up at all, the problem is not Yosemite per se. It's the USB3 driver incompatibility. Try using a USB2 cable (micro USB just like an android charger cable that plugs in half of the slot on your hard drive) and it will work. Or try connecting it to an older computer that has USB2 ports on it (with the original USB3 cable) and it will work BOTH on Yosemite and Mavericks. Of course it will transfer data at USB2 speeds. Apple screwed up the drivers again so we have to wait for them to 1. receive thousands of complaints 2. wait for eternity to acknowledge there's an issue. 3. take their sweet time fixing the USB3 drivers. Until then you can get by with USB2 cables. I hope this helps!

Windows media player stop working after upgraded from firefox 6.02 to Firefox 7.01 yesterday.

windows media player stop working after upgraded from Firefox 6.02 to Firefox 7.01 yesterday.
the plugin for win media player is already installed and working fine in FF 6.02 before upgrade. i have Google this issue without any result so far. so i reinstalled the old version 6.02, until fix is found.
anyone has the similar issue with Firefox 7.01 in Win 7 32 bit ?

The issue was not with FF 7.01. VLC player version 1.11.1 is conflicting with windows media player when FF 7.01 tries to play media files! Which was not happening before in FF 6.02.
VLC and plugin media player need to be uninstalled first, then uninstalled FF 6.02. Install FF 7.01 and then win plugin media player again.
Test media player at www.vdat.com/techsupport/windowstest.asp

My Microsoft Office 2004 stopped working after upgrading to MT. How can I get it to work, or, how can I uninstall MT?

My Microsoft Office 2004 stopped working after upgrading to Mountain Lion. How can I get it to work again, or, how can I uninstall MT?

Office 2004 Applications Won't Work in Lion
You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

Microphone no longer works after upgrade to windows 8.1

After upgrade to windows 8.1 my internal microphone no longer works.
I tried installing updates suggested in other posts with similar driver problems but they did not work.
HPSupportSolutionsFramework-en-11.51.0048 did not work.
My internal microphone is IDT High Definition Audio Codec
When I go through the control panel and look at it - it shows a status of "not plugged in"
Please help
thanks

OK I am a little confused.
There has been no response on this subject in over a week. Not since I responded to your questions regarding product name and number.
However I just received the following email from you:
Hello gordml,
The questions you posted on the HP Support Forum recently received one or more answers.
Question: Microphone no longer works after upgrade to windows 8.1
Date: Sun Dec 21 01:01:56 PST 2014
View the answer(s).
Did this reply resolve your post or question?
If yes, then share the good news! Let others know this reply was helpful by accepting this solution.
You can also show your appreciation by giving kudos.
We appreciate your feedback. It's what keeps our community such a helpful, vibrant place for our members.
Thanks for being a member!
The HP Support Forum Team"
Why would this be sent to me if there has been no recent replies on this issue?

Kodak ESP 3200 stopped working after upgrading to Yosemite

Kodak ESP 3200 stopped working after upgrading to Yosemite

Kodak has posted an unsupported hack that has been reported to enable printing to a Kodak printer not supported in OS X 10.10 ("Yosemite"). Perhaps it would have the same effect with some other kinds of printers that aren't supported in Yosemite. I have no information about that, one way or the other.
I have not tested the hack myself and I don't know all the possible effects. As far as I know it will not break the compatibility of printing software that is already compatible with Yosemite. It may degrade the security of the web administration interface of CUPS. That interface is not enabled by default, and will not be enabled by the procedure described here. Even if it were enabled, I know of no way it could be exploited, with or without the modification. Nevertheless, if you have enabled the web administration interface, you should disable it if you decide to follow these instructions. If you don't know what the web administration interface is, you haven't enabled it.

Why my hp mini 5101 the "7" key doesnt work after upgraded the bios?

why my hp mini 5101 the "7" key doesnt work after upgraded the bios?
The current bios version is F.07

korpx,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

My "9-o-l-." keys stop working after startup, and spreading! ahh help?

My "9-O-L-." keys stop working after startup and my arrow keys too.
Sometimes when I start up the keys will work for a bit then one by one stop functioning and then randomly work every so often, then it seems to "spread" to the right shift key, and sometimes the "8-I-K-," keys.
Around the same time when this all began my Battery completely stopped working too, does this have anything to do with it? I've reset my PRAM and no luck.
I'm planning on replacing the keyboard, will that fix the problem? or is it something deeper?
Thanks in advance!
-Andrew

I assume you've rebooted? Can you control the computer well enough to make a new account and log into it? Doubt this will fix it but maybe. The keyboard may need replacing but it might also be that the cable has worked loose so that some of the wires have disconnected but not all. Sounds like a trip or call to Apple is in order.

Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

try and Reset the System Management Controller (SMC)

Why did AME stop working after the last Windows 7 update

AME suddenly stopped working after the last Windows 7 update. After the initial splash screen, I get a message saying that AME is not working and the program will be closed. Then I get the windows message that it is searching for a solution, then nothing. I am using the Production CS6. This happens whether I try to start AME directly, or queuing through Premiere Pro. I have tried reinstalling the entire package and have implemented all available updates from Adobe. I have no clue why this happened, but AME is crucial to my workflow.

Try to delete the following folders and then launch AME:
%AppData%\Adobe\Adobe Media Encoder
%AppData%\Adobe\Common
Make sure to first make a backup of those folders.

Touchscreen stopped working when upgraded to Windows 8.1

I have an HP Pavilion Product EOK22UA#ABA and Model 14-1027cl (I think?) and when I upgraded to Windows 8.1, the touchscreen has stopped working. I've looked through the forums and I can't find someone with the same Product/Model as me and I'm trying to find a solution to this. I do not want to do the "Refresh your PC without affecting your files" because I have programs on my computer that I cannot get again because they were downloaded on education licenses (I am a college student) and I can only download once. Any suggestions on how I can get my touchscreen up and running again? Thanks.

Hello @s_jensen,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that the touchscreen on your notebook computer has stopped working since upgrading to Windows 8.1, and I would be happy to assist you in this matter!
Since your system may still have an older version of AMD graphics drivers installed on your computer, I recommend uninstalling the Windows 8 graphics drivers and installing the compatible ones for Windows 8.1. To do this, I recommend removing the drivers in Programs and Features and the Device Manager. Once the old software is removed, please restart your computer.
The drivers for your graphics card and touchscreen can be downloaded below:
AMD High-Definition (HD) Graphics Driver and
AMD High-Definition (HD) Graphics Driver
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

WiFi (Key) stopped working after upgrade to Windows 10

Similar Messages

Maybe you are looking for