WiFi light not lighting with power on zv6000

IMy Pavilion zv6000 will not connect to my network, the wifi button does not light with power on. I am using ubuntu 12.04 operating system. My network adapter driver appears to be installed and operable.

Check for hardware failure if any:
Restart the computer and Press the F2 key immediately to enter ‘Hardware Diagnostics’/"System Diagnostics" and then perform the extensive test.
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • HT2037 icon reads "battery not charging" with power adapter lit "green". Do I replace battery or power adapter?

    icon reads "battery not charging" with power adapter lit "green". do I replace the battery or the power adapter?

    Go to the Apple in the upper left corner and select About This Mac, then click on More Info, then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information back here.

  • HP G62 Will Not Boot With Power Cord Plugged In

    I have an HP G62 laptop that is about four years old. I've had a couple of problems with it before that were resolved relatively satisfactorily, however five or six months ago I started having a new issue. The laptop will not boot with the charging cord plugged in, whether there is a battery in it or not. Nor will it return from sleep mode (screen black, status light on the power button flashing) with the charging cord plugged in, whether there is a battery in it or not. It simply shuts down and I end up with an error screen the next time I boot up. I have tried other charging cords and it has been the same, however the cord will still charge the battery. This means I have to charge the battery, unplug the cord, boot up the computer. This annoyance is worsened by the fact that the battery  is old and unable to  hold charge for very long at all and I fear one day even the battery won't be enough to boot the computer.Can I fix the power cord issue? Should I buy a new battery? Or let my computer give up the ghost and scrounge for a new one? Any help would be greatly appreciated.

    the charger input could possibly need replaced and/or the charger

  • T43-W7 (new install) Fingerprint Software not interfacing with power-on password

    Went through a remarkably painless upgrade of my old T-43 to W7 yesterday.  After the W7 install, I added the Lenovo Toolkit, and let it load the recommended drivers/updates.  Then to regain use of the fingerprint function, I d/l'd the latest version of CSS, which seemed to install just fine (per upgrade recommendations, I uninstalled the fingerprints/power-on password prior to upgrade).  
    In going through the enrollment process, the only checkboxes that appear above each "finger" are for Windows, not for the power-on password.  The power-on password isenabled and set in BIOS for both the computer and the hard drive (password identical to the Windows User password).  Tried with the Security Chip both Enabled and Disabled, and also tried "Clearing" the security Chip, to no avail. 
    The result so far is that fingerprint login is working great for W7, but no longer works at all for power on, as it did under W2k.  I have an X301 that I upgraded from Vista to W7 on which all of this works perfectly, so I am pretty sure I know what should be possible, but maybe this is beyond the hardware function of W7 with the T43? Am I missing something? 

    Vince69,
    Thank you again for your suggestion.  I tried updating the driver using the package you pointed to, and did not have any luck.  Kept getting "Driver not found", (and include subdirs was checked).  Also tried manually dropping into each subir in the file, and still no luck.
    I came across an entry in http://social.technet.microsoft.com/Forums/en/w7itprohardware/thread/aa965e55-de21-4dd0-93e2-05e6d14... which seems to address the "Unkown Device" issue.  Go about halfway down the page, and the instructions provided by James Norman seemed to work for me--at least it made the error message go away.
    But the original problem of the Fingerprint s/w interfacing with power-on password is still there.  After fixing the device driver problem, I reinstalled Fingerprint Software (I had uninstalled it before fixing the Device Driver issue), and I have the same behavior and selection choices under "Settings" as I had before--none of the settings include anything to do with power-on password.
    Any more suggestions?

  • WIFI password not synced with iOS device

    For short: I'm excluded off my own WIFI net because Apple's iCloud Keychain didn't sync the WIFI password from my MacBook to my iPad.
    For my holidays I bought a nice portable WIFI hard disk. This device can not only take the memory cards of my camera and store the images without any computer, but also establishes a WIFI network, by which I can access the content of the mobile harddisk wirelessly.
    At home, I configured this neat device with my MacBookPro and accessed it via WIFI by choosing the WIFI hard disk's network and entering the password, which Apple suggested during the configuration process of the WIFI hard disk. At this moment (entering the WIFI password to connect with the hard disk's network), I had to recurr onto the OSX keychain helper: look for the formerly entered password and paste it into the WIFI accounting form - and check the box "store in the icloud keychain". Ok.
    Ok? Nothing's ok on my iOS devices (iPad and iPhone). Why?
    By checking the box, I was sure that the password would indeed be synced with and stored within the iCloud keychain.
    But I went wrong!
    Now on holidays, with my camera, my iPad, my WIFI hard disk and – without my MacBookPro (because it's a holidays killer) – I tried to connect my iPad with the WIFI of the mobile hard disk. Seeing it's WIFI network, I tapped on it and got the accounting dialog: Enter password.
    Which password?!?
    I had instructed the Apple iCloud to store this password – and deliver it to any authorized device if needed.
    But Apple, seemingly, did NOT do this and failed to deliver the password to my iPad (which is naturally registered to the same Apple ID as my MacBook).
    What shall I do now? I have NO access neither to my MacBookPro (which is at home) nor to my iCloud keychain (which Apple thinks the best to protect against me).
    To be honest, I feel patronized in a very ugly way by Apple - once again.
    My question is: Why isn't there a way to access or manage the iCloud keychain from an iOS device? Should it be that Apple thinks these devices are LESS SECURE?
    Any help is very welcome! Thanks in advance.

    Thanks, FromSouth -
    I called Apple Support and they also said that she has to have access to my iCloud account. We did figure out that some of the notes from 2011 and 2012 are from a shared business account which also allows notes, but that is a Verizon account and should not impact, in any way, shape, or form, the iCloud account.
    I do not believe my daughter actually did this; I am guessing that her iCloud account was also accessed by her husband (who is not a good guy), and he, without her knowledge, synced her iCloud to his iPhone to track all her stuff. I then believe he got hold of mine and did the same a couple of days ago, as we are all together for a large family vacation (in the same house).
    I guess I have a couple more questions about this, though:
    Normally, when you sync a new device with your account, you get a message on all your old devices - but I did not get anything of the kind. How would this be possible? I guess maybe if he synced it while standing there with my iPad, then my iPad would get an alert, and he would just turn it off?? (I know all this sounds excessive, but believe me, he'd go to this length.)
    I find it difficult to believe that he could have cracked my iCloud password - it's not something that anyone would ever put together easily. How would he be able to access the account without a password? Is there any kind of app or software that he could have installed on my iPad that would allow that? (Again, believe me, he'd do it.)
    Is there any way to see in iCloud what devices are linked to the account? That alone would show me what device has this.
    Finally, I have my iPad password-protected, so I cannot imagine he would have gotten into my iPad in the first place...how would he have gained access to this otherwise? I really thought I was being very smart on how I set this all up, and two days in the same location as him and now this....
    I really thank you for any help you can give me on this one...
    Thanks!

  • HH3 Broadband blue light not working with Power Sa...

    Had a BT engineer here today to do a line check and DLM reset when he noticed the blue lights were out, so I told him they were disabled in the powersave mode via the HH Manager at that time.It wasn't till he'd gone I realised he meant the Broadband light was out, which I simply hadn't noticed.This got me wondering if my fairly recent speed problems could be related with drop offs and such, but the engineer didn't persue the blue light issue earlier. 
    I rang BT to enquire about a replacement HH3, and was quoted £10 with £6 postage, because the warranty had run out on the hub, as well as me being out of contract.
    It sounds about right but can anyone here confirm please?

    Also - I need to add that the printer is sitting about an inch away from the Mac. 

  • Wifi is not working with 6.1.3 iPad 2

    Is anyone else having issues with 6.1.3 and the wifi connenction?  I updated to the latest iOS on my iPad 2 and my iPhone 4S and I an now unable to connect to wifi at my house.  I have not tried different wifi networks because I haven't left home yet but I am unable to connect here.  Anyway have a suggestion?  I tried a hard reset and I reset the network setting but that did not solve the problem.  I can see the wifi networks but I cannot connect to them.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Wifi card not detected with ifconfig (solved)

    Hello,
    I'm not sure wether I should post this here or not...
    However, I'm using a Realtek Wifi card RTL8188CE on my laptop and I couldn't succeed in using it. (I'm using Arch x64, it's up-to-date).
    I tried using ndiswrapper, but even when the ndiswrapper module is loaded and the driver properly created from the ".inf" file, ifconfig -a still doesn't display anything else than the usual "eth0" and "lo".
    Here are the information I think are useful, please tell me if I forgot anything.
    # lshw -C network
    *-network NON-RÉCLAMÉ
    description: Network controller
    produit: RTL8188CE 802.11b/g/n WiFi Adapter
    fabriquant: Realtek Semiconductor Co., Ltd.
    identifiant matériel: 0
    information bus: pci@0000:08:00.0
    version: 01
    bits: 64 bits
    horloge: 33MHz
    fonctionnalités: pm msi pciexpress bus_master cap_list
    configuration: latency=0
    ressources: portE/S:3000(taille=256) mémoire:f2d00000-f2d03fff
    # lspci -vnn
    08:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01)
    Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:9196]
    Flags: bus master, fast devsel, latency 0, IRQ 7
    I/O ports at 3000 [size=256]
    Memory at f2d00000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [40] Power Management version 3
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [70] Express Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [140] Virtual Channel
    Capabilities: [160] Device Serial Number 01-91-81-fe-ff-4c-e0-00
    # lsmod | grep ndiswrapper
    ndiswrapper 231163 0
    usbcore 139496 5 uvcvideo,ndiswrapper,xhci_hcd,ehci_hcd
    # ndiswrapper -l
    net8192ce : driver installed
    device (10EC:8176) present
    net8192cu : driver installed
    Thanks in advance and please tell me if anything is missing !
    Regards,
    Alfred
    Last edited by Alfred456654 (2011-04-03 16:15:06)

    Hello,
    I finally solved my problem. It turns out my driver existed on the AUR and all I had to do is load the corresponding module with modprobe.
    Some useful links :
    https://wiki.archlinux.org/index.php/Wi … _Supported
    https://wiki.archlinux.org/index.php/Co … ice_module
    Also here is the very same topic on the french forum where I was helped solving my problem (hopefully google is gonna be able to translate it) :
    http://forums.archlinux.fr/topic7887.html

  • Wifi Sync not working with Windows 7 64bit

    Hi, having an issue with wifi sync for some reason.  I am running Win 7 64bit, and I have tried everything on these forums with not luck.  It is not my router because it works on another computer with no problem.  I have enabled all ports, syncserver, etc. and nothing is working.  I have done a complete uninstall, registry clean, and reinstall with no luck.  I have noticed though on my computer when I check the box to allow my wifi sync to be enabled, all the box says is "Sync with this Iphone over....."  It does not say "sync with this Iphone over wifi".  The other computer I tried wifi sync with that worked said "sync with this Iphone over Wifi"  Any thoughts on what would cause my itunes to not display the full message?

    Forgot to mention I am using Itunes 10.6.0

  • Java 7 not working with Power Teacher grade book

    I have the same issue as Tweeks21 and don't have the luxury, I suppose, of a spare pc on hand.  I can do my attendance on Power Teacher but cannot get into my grade book.  At this point, I've resorted back to my paper grade book and wait to use the school's pc. I am a bit frustrated and annoyed at the prospects.  When will this be fixed.  How long will it take to be fixed. Wish Java, Mac, or Power School/Power Teacher had anticipated problem so it wouldn't be a challenge now.  I am a bit anxious for a now solution. help!!

    Basic problem when jumping the shark and not retaining a bootable backup/clone of your previously good installation. Sorry, but don't have a solution for you. All I can suggest is to File a bug report with Apple. Complaining here is fruitless.

  • Wifi will not connect with new ios 7 update

    I just downloaded the new ios7 on my ipad mini. I cannot connect to wifi now. It will not find a network and will not work when I type it in. I have tried shuting it down.

    I have tried everything as well.  I hard reset but still nothing.  When I try to erase and reinstall it won't let me because it says no internet connection.  If I knew there would be this many problems I would not have bothered with the update.  Hopefully someone has some insight and help.

  • Wifi direct not working with other brands

    Is it not possible to to uae wifi direct with other brands like Samsung S3,5,6 or others? Because im trying to copy some huge file using wifi direct but it was unsuccessful.

    I am able to connect to my tesco hudl and my MxQ tv box.

  • Q10 os upgrade 10.2.1.537 Wifi dos not associate with network

    Hi all, have a BB Q10 and since monday have updated the OS and since then i am not able to connect to my networks at work and home. I have delated both saved networks and re done them, and it keeps telling me not able to associate with network. Can you help me? Mo

    I'd recommend this Knowledge Based: Article ID: KB14477 Unable to connect to a Wi-Fi network on the BlackBerry smartphone. And also the documentation of troubleshooting wizard: http://docs.blackberry.com/en/smartphone_users/deliverables/48934/wifi.jsp
    If the problem persist, it's time to call your ISP. They must know specific setting based on the router model that you are using.
    Good luck.
    • Click Likes to appreciate those who helps you
    • If your issue solved, mark the best post in your thread as Solution

  • My iPhone 3S will not allow me to upgrade. I can't download any apps and when I connected my iPhone to iTunes and tried to upgrade it, it said it was already updated. On top of that, WiFi does not work with my iPhone. What do I do to fix this?

    My dad got this iPhone for me a few months ago as a gift since I had a really awful phone before.  The only thing is, I can't seem to upgrade it to the latest software without it telling me it's already updated to iOS 4 or something like that.  (I would be able to give you the exact iOS version, but ever since connecting my iPhone to iTunes, my phone isn't responding so I can't check the settings or anything.)  I can't download any apps (I get an error message saying the software on my phone is too old) and so I pretty much am extremely limited to what I can do on this phone.  I'm very frustrated at this point and incredibly displeased with Apple's products.
    If someone could please explain to me why this is happening and what I can do to fix it, I'd be extremely grateful.
    Thanks.

    What iPhone do you have? You can check in settings>>general>> about.
    If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
    If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears.

  • ITunes WiFi Sync not working with iPhone 6, but works with iPad 1

    I have an iPhone 6 and an iPad 1. The iPhone 6 runs iOS 8 and the iPad 1 runs iOS 5.
    Yet, the iPad works fine using iTunes WiFi Sync with my Mac, while my iPhone never works with it. Whenever I forcibly make it sync by clicking on the device in iTunes and on Sync, it gets ejected/removed from iTunes. This doesn't happen with my iPad.
    Is this a problem specific with the iPhone 6? Anyone know what I can do to fix it?
    If I uncheck and re-check the WiFi Sync setting for my iPhone 6, then it syncs fine the first time again. But it doesn't work after that. So the device is definitely on the correct WiFi network at least.

    It continues to be UNREAL how Apple will release iOS software without testing it.  Yep.  They BROKE WIFI SYNC.  It no longer works on my iPhones or iPads either.  UNREAL!!!!!!

Maybe you are looking for