Wifi module not working in ZTE Open
Hi all.
Bought this device ZTE Open! When I updated the firmware to v1.1 wi-fi module stopped working!
Current firmware: OPEN_US_DEV_FFOS_V1.1.0B01
=More information=
OS version: 1.1.0.0
Firmware revision: 01.01.00.019.215
Hardware revision revision: P752D04B02
Platform version: 18.1
=Git commit info=
2013-12-04
'''UPD: '''
Wi-fi access point see, connected.
But no packets, internet does not work.
Similar Messages
-
Z97 gaming 9 AC bluetooth/wifi module not working
As the title suggests.
Nothing shows up in hardware manager, the module is physically installed OK (redone twice) no bent pins or obvious damage or shorting.
Weirdly enough the driver disk doesn't seem to work either, nothing shows in the list to install, downloaded drivers from website and installed but still nothing working still.
everything else on MB working fine, really nice board, if the module is kaput can I get a replacement? I'd hate to send the board back because I'd be without my computer.Quote from: marquesjm on 15-October-14, 19:09:59
Hi!
I have the same problem, but it only happened after flashing my BIOS to 1.6.
I have Windows 8.1 x64.
Can someone help me please ?
Best regards
Jorge
Please open your own thread insted of hijacking
>>Please read and comply with the Forum Rules.<< -
Re: Z97 gaming 9 AC bluetooth/wifi module not working
The detection problem is not from your damage of the antenna or so, but I think is a hardware design problem.
If you try to reboot it in different ways - such as OS reboot, pressing reset key or even unplug the power cord; you will see the bluetooth ...Quote from: chc on Yesterday at 08:19:38I installed the two AP on my laptop(not GP60) and DGC is still working fine. Maybe some files required by DGC were removed by the software "Your uninstaller"?? Can you check eve...
-
TuochSmart 600-1135it,
modulo wi-fi non viene attivato con win8.1, e non mi dà nessun errore.
This question was solved.
View Solution.Ciao
Per favore, vai a Gestione periferiche e fare clic sul controller di rete che necessita di driver.
Poi inserire l'ID hardware per essa.
Se non sai dove trovare l'ID hardware, si prega di leggere la guida al link qui sotto.
http://www.wikihow.com/Find-Hardware-ID
Hello
Please go to the device manager and click on the network controller needing drivers.
Then post the hardware ID for it.
If you do not know where to find the hardware ID, please read the guide at the link below. -
my i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting >general<reset<reset network setting. but all in vain. tell me the solution
restore your phone as new through itunes. if the issue persists after a factory restore via itunes, it means you've got a hardware issue and the phone needs to be repaired
-
hi can anyone help my iphone 4s wifi is not working it is grayed out or dim but the is a wifi address on the about menu.
hello Masonti
I am not computer expert it happen to me. I think it is not working for a touch on/ off so you have to push using your finger and hold and open to the right (like when you open a door). That worked for me I call it mannual opening. I did not get any help so I figured out the hard way.Let me know but I am for sure
yeee haa -
Wifi password not working on MacBook Pro
Wifi password not working
I got a MacBook Pro today. The previous owner had Apple wipe it clean for the new owner, me. When I first tried putting my wifi password in, I wasn't remembering exactly what it was, so I tried many different possibilities. Since then, I found my password in my office. I put it in, when it asked for it. But, it's not taking it. It just says searching for networks. And, this is after I identified the correct network. So, I am wondering if perhaps after a number of "tries" does it not accept ANY further attempts ? You know like Banking passwords....you get locked out. I'm wondering if I'm locked out?No, not like a bank timeout.
Open keychain in your Utilities Folder and look for old router password, or delete wrong passwords.
You can always reset your router password to something new that you can remember. -
After upgrading iOS 7 on my iPhone 5, the wifi is not working . It cannot detect any wifi nor am I able to enable wifi under settings. Is there a way for me to fix this?
Hi samer almasri,
If you are having issues with enabling Wifi on your iPhone you may want to try a couple of things to troubleshoot. First of all I would quit all open applications on the phone and try again. See this previous thread for how -
How do I close apps on my iPhone with iOS 7?
https://discussions.apple.com/thread/5581063
Next, I would try restarting the iPhone -
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
If the issue is still present, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
Thanks for using Apple Support Communities.
Best,
Brett L -
I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired and i also reset network setting but nothing gonna be worked
Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement. -
My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out
Hello there, TempestBelcher.
It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
Apple - Support - iPhone - Calls Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/calls/#section_0
If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
wifi is not working on 4s after upgrading its ios version.. please help me, what to do???
thanks, but what if i restore my iphone using itunes, will it help me? actually i brought this phone from australia and now i am using it in india and it is factory unlocked.. so if i restore it to factory setting then shall i have to go through factory unlock process again or my phone will stay activated for indian telecom network?
-
Wifi Sync not working on iOS 6 and iTunes 10.7 with iPhone 4S
I am running Windows 7 64-bit but WiFi Sync is not working on either my iPhone 4S or my wife's iPhone 4S. Worked fine before upgrading. All settings look correct in iTunes 10.7 and on our iPhones 4S's. Already tried uninstalling iTunes and all associated Apple programs (Bonjour, Apple Mobile Device Support, Apple Application Support, etc) and reinstalling iTunes but no help. Temporarily disabling Norton Firewall did not help. If I hook up either of our two 4S phones via USB wire, they Sync and Backup fine. Just WiFi Sync not working. Can't initiate sync from iPhones because button is ghosted stating it is waiting for PC to be present. Phones don't show up under Devices in iTunes unless hard-wired via USB cable. Any suggestions?
I am getting sync issues too (although on OSX) - seems like others are getting issues too:
https://discussions.apple.com/message/19834721#19834721
Good luck,
Chris -
My iPod Touch 3rd gen is screwed up the backlights screwed and the Wifi is not working its showing no wifi!
See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
For backlight
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
this device is not longer eligible for creating a free i cloud accounting on my Iphone 5s , my old not working now cannot opened again just when i try make a free email this Message showed up how i can fix it
please help me
iPhone 5s, iOS 8.3Create a new AppleID on a different iOS device or on a computer. You will
then be able to use that newly created AppleID on your iPhone. -
My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.
The problem would seem to be in the firewall in your router. Have you tried disabling it? I assume you've updated the router firmware, right? Consider bypassing the ISP provided router (using it as a modem only) and unsing another device such as an Aiport Express.
Maybe you are looking for
-
Problem of POP LOV in a SQL Report with pagination
I am using a pop up lov (along with some other fields), HTMLDB_ITEM.POPUP_FROM_LOV(5, null, 'EMPLOYEE_LIST', '20', '50')), in a sql report. This is a report with pagination. Whenever I select any value from pop up lov on first page of the report it g
-
How do I convert a file located in my e-mail (that is secured) from PDF to Word. I can't seem to save the PDF file anywhere.
-
Type on a path in photoshop CS5
I am a new user of Photoshop, and am using CS5. "I'm working through Classroom in a Book" and following instructions given, and also looking up information and videos on line. When I try to type text on a path, I move the cursor till the I cursor ha
-
hello i would like to transform rows into columns and need your help i have table orders where we have two columns orderid,orderdate orderid order_date 1234 9/10/2009 4555 10/1/2009i have order_codes have 3 columns orderid desc value data
-
Hello again... Okay, here's the scoop: I'm building some websites which will be expanding in size over the coming months and years. Right now I have a footer with copyright info, it's text controlled ny an external style sheet. Works lovely. So let's