Wifi no longer connects to internet

In OSX 6.8 I was able to use my AirPort setup to share my internet access with my ipod, but with the upgrade to Mavericks Airport has become WiFi and will not access my internet connection. I've gone through all the Assistance and online troubleshooting guides, to no avail. Any suggestions?

Same here, just trying to connect my phone.
The sad thing is that I've spent hours and hours with a guy from Apple the last few weeks, and hours doing backup, so that we could delete EVERYTHING, reinstall Snow Leopard, then Maverick, just to find out that the problem is Mavericks, and clearly not my computer. So all I've got so far is hours wasted and my iLife is gone, and I will have to spend hours and hours to transfer all my files back.
Nice guy from Apple, but if this has been an issue for months, they should have known about it, and have fixed it at this point.

Similar Messages

  • After upgrade to ios6 iPad does not accept password to wifi, I cannot connect to internet. Pls help me...

    After upgrade to ios6 iPad does not accept password to wifi, I cannot connect to internet. Pls help me...

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Firefox no longer connects to internet on my mac, and windows machines, after v18. I've tried several solutions from Mozilla support and nothing works. Firefox

    Firefox no longer connects to internet on my mac, and windows machines, after v18. I've tried several solutions from Mozilla support and nothing works. Firefox can't even connect to Mozilla for updates. Firefox just sits on the default search page and attempts to connect to websites by typing URLs, or by clicking on the links on the default search page don't work.

    You could try the following:
    * Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
    * Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see Configure firewalls so that Firefox can access the Internet.
    Let us know if this fixed your problem!

  • HT5642 I get a unable tO download messge when i try to download ios6.1. I need ios612 to fix calendar bug....the message i get says that unable to download because no longer connected to internet....i am connected to the internet all along

    I get a unable tO download messge when i try to download ios6.1. I need ios612 to fix calendar bug....the message i get says that unable to download because no longer connected to internet....i am connected to the internet all along

    1. Try reinstall iLIfe 09 from your install disk
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
    If that fails, then you're reinstalling the OS.

  • HT5957 Unable to update. I phone keep getting this msg.   Unable to verify update iOS 7.0.2 failed verification because you are no longer connected to Internet

    Unable to verify update iOS 7.0.2 failed verification  because you are no longer connected to Internet

    I still haven't seen a solution to the problem "unable to verify update iOS 7.0.2 failed verification because you are no longer connected to internet"
    I did not have my iPhone plugged in to power during download, had plenty of power.
    Download burped once and restarted download.
    I got to the Verification step and it failed multiple times.
    I plugged in power, I turned off iPhone and restarted.
    I tried to do the download again and it goes to the Verify step
    and get the same error message.
    I do not have an Apple PC, but, have a Windows 8 PC.
    WIll iTunes help better manage the update?
    rdmayo

  • Wifi no longer connecting after startup

    wifi no longer connecting after startup... so I have to connect manually... started after 10.7.3
    any ideas

    Which computer are you experiencing this on?
    There are several threads dealing with (mostly) iMacs + bluetooth keyboards/mice and issues with WiFi no longer automatically connecting. There seems to be some issue that 10.7.3 introduces with these series of macs.
    No Apple provided solutions yet, but several workarounds: 1) attach a network cable direclty from modem/router to mac; 2) use the power button instead of mouse/keyboard to wake up mouse; 3) use USB keyboard/mouse (not personally confirmed); use airport extreme/express as a bridge.
    Right now it's a waiting game until Apple provides another update. I do recommend going to Apple feeback: (http://www.apple.com/feedback/) and at least voicing your opinion. Calling AppleSupport will do the same, but they'll make you go through the same (likely useless) steps everyone else has done.
    Good luck!

  • AirPort no longer connects to internet but local networking is fine.

    I have an Airport Extreme router version 7.6.3. Recently the router has been dropping connections with my cable modem.  I have had to reboot the modem and the router to reconnect.  It is no longer connecting to the internet at all.  All of my wireless devices can find the Airport and connect to my local WiFi network but no internet access.  I tried connecting my macbook directly to the cable modem via ethernet cable and had some of the fastest internet connections in recent memory.  How do I make the router work?

    mopar408 wrote:
    I did.  They very politely told me - after checking the connection for 15 mintues with me online - that it appeared to be a router issue from thier perspective.  I was wondering if there is some way to test the routers basic functions, etc.
    If you haven't already done so, install 5.6 utility on your Mac..
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
    Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
    Roll the firmware version back to 7.6.1 or earlier if it will work.. the latest firmware is not the greatest by a long shot.
    Then using 5.6 utility you can access the advanced logs on the Extreme.. you cannot do that with v6 utility.
    It should show disconnections happening.
    You can also access the WAN ethernet settings and set the Airport to 100mbit full duplex.. this seems to have helped people lately.
    Of course nothing like this exists in v6 utility.. being a toy utility.

  • Can no longer connect to internet on my iTouch

    I have had my iTouch for just over a year and had no problems connecting to the internet at home and elsewhere. I had to purchase a new router recently and now my Touch no longer connects. It finds the network with no problem but when I enter my password it still says "unable to join the network..." It works everywhere else just fine and my laptop at home connects to my wi-fi with no problem as well. I have tried to input my network under "Other networks" with no success either. My settings and password are the same as before but it still won't connect. Has anyone else had this problem and any ideas on how to fix it? I went to the Apple store and they said they had no idea why it no longer connects. Thanks for any help you can send me.

    Are you running WEP encryption? Chances are the new router interprets your password in a form that the touch can't deal with. You can either using the hex code in place of the password you created or reset your encryption to WPA2-psk and create a new 10-12 character password.
    If you don't want to change encryption, you can reconfigure your WEP passwords - 5 characters only with 48bit or 13 characters only with 128 bit.

  • Can no longer connect to internet w/ cell signal - advice?

    Hi, all -
    I can no longer access the internet using a cell signal on my Droid 3. Everything was working fine until about a week ago, but now I get no 3G signal at all and only one or two bars. When I turn on the WiFi, I have no trouble accessing the internet. I can make calls with no problem, but cannot access the internet or my apps.
    I have tried the following, but I am still not getting a usable wireless signal:
    ·        -  Restarted device several times
    ·       -  Turned “airplane” settings on and off
    ·        - Removed battery, replaced it and restarted
    ·        -  Dialed *228, then option 1 to activate service
    ·        - Dialed *228, then option 2 to reprogram service
    Does anybody have any other ideas? I REALLY do not want to use the "nuclear" factory reset option unless absolutely necessary!
    Thanks in advance for any help!

        dmiller28, being without data is very difficult! Your efforts are greatly appreciated and you are on the right track with the troubleshooting steps. Have you tried checking the network settings in the device? To do this you will go to: menu>settings>wireless and networks>network mode and check if it is set to CDMA. Otherwise the next step is to do the factory reset which will be the last resort option. Keep us posted, thanks! 
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • Ipad no longer connects to internet after using remote app for apple TV

    I can use the Remote app on my Ipad to connect to Itunes library through my apple TV but as soon as I do that, I can no longer connect to the internet on my Ipad.  The network stays connected on my Ipad but no internet.  I have to recycle the router (airport extreme) and power off the Apple TV.  Once I do that I can then connect to the internet again.  I am using a Mac Pro as my desktop with airport extreme as my router.  All software is up to date.  Appreciate any thoughts anyone might have.  Its a pain to use that litte remote for my Apple TV.

    My question: Is it normal for the internet connection to switch from an Apple Network to another network?
    No.
    You are probably connecting to a neighbor's wireless network. Unplug your base station and see if the network remains.

  • IMac G5 isight Can No longer connect to internet over Airport

    I have an iMac G5 that has been working fine on my Airport Extreme wireless network for 3 years. Suddenly, I can no longer access the internet over my Airport connection. The computer is on my local Airport network wirelessly (I can access it from my laptop and share files). I can connect to the internet from 4 other computers connected to the same wireless Airport network (2 MacBook Pro's, 1 Powermac G4). In addition, if I connect my iMac to my laptop via a twisted pair ethernet cable and turn on internet sharing on my laptop, my iMac can connect to the internet. All systems are running 10.5.5 and no firewalls in place. I checked my internet preferences and they have not been changed from what they were before when it was working. DOES ANYONE HAVE ANY IDEA WHY SUDDENLY IT STOPPED CONNECTING TO THE INTERNET OVER MY WIRELESS AIRPORT CONNECTION?

    I have just experienced the same situation. Everything was working fine and now I can't connect to my airport from my macbook pro. I also have an iMac G5 working perfectly well on the same airport.
    Could it be a latest update that has caused the problem?

  • Airport Extreme no longer connects to internet ****

    I really hope somebody can help me. I've searched the forum and believe I've tried everything suggested to others having similar issues.
    I've never had any issues with my Airport before this past week when suddenly my broadband connection went dead (Charter Cable). I was able to get a signal to the modem as it appeared the cable was disconnected outside so I reattached. I've talked to the tech support people who were able to "see" that my modem was online but wireless was not working.
    I have reset the Airport Extreme, I have reset the cable modem (Scientific Atlanta), I have unplugged both for up to 2hrs, I have deleted and reinstalled the airport software, I have tried starting a new location in network preferences. The green light glows green on the Airport but I still get errors ranging from 'you appear to not have a valid internet connection to perhaps you typed the url incorrectly'. I have even tried setting up a brand new Airport up with the same result. I have tried using other wifi devices to connect, select my network, I get full wifi connection (bars) but still nothing.
    If I plug directly via ethernet cable from modem to macbook I have no problems.
    I spent 2 hours on the phone with apple yesterday and they were not able to figure it out. We were able to see a valid looking IP address, select my network, etc and nothing. My internet provider is adamant that this is not their problem. I've also tried two different cable modems from the cable company. For five years I've had no issues and for some inexplicable reason getting wireless to work is like trying to land on the moon now.
    Any ideas?

    Hi everyone,
    I called Apple today and found the solution to my problem. The cable modem was not sending the correct IP address to the Airport. You can tell by opening the Airport Admin program, selecting internet from the tabbed menu and looking at the IP address. If it ends in ".169" that is bad. So, close the Airport Admin program, turn off the cable modem, wait 20-30 seconds, turn it on again and wait for it to power up. After another 30 seconds, open the Airport Admin and select the internet tab. The IP address should be different and..... now it works! The person helping me at Apple says he has to do this about once a month for some reason.
    Hope this helps others, ellen

  • Installed iOS6 and wifi no longer connects

    I have an iphone 4S and I installed iOS6 and i have now fond I can no longer connect to wifi networks. My first attempt to fix was to use reset network settings but this has not helped at all.
    Is ther a bug or a does someone know of a fix?

    Turn off your iPhone completely (hold sleep button until the power off slider shows up and turn off the phone)
    Hold the sleep and home button simultaneously for 10 seconds or so and then release the sleep button while still holding in the home button. This will put your iPhone into recovery mode.
    If you haven't already, download the older version of the firmware. Go to this website and download the firmware that is right for your iPhone. When you go to this site, make sure that you download the correct firmware for your 2g iPhone or 3g iPhone. http://www.iclarified.com/entry/index.php?enid=750
    Now connect your iPhone to your computer and open iTunes. iTunes will detect that your iphone is in recovery mode and tell you that you need to restore it. If you are using a Mac you need to hold down the option button and click restore, if you are using a Windows PC hold down the shift button and click restore. This will allow you to choose the firmware file you want to restore to. So when it asks to choose the firmware, browse to the firmware you downloaded from above and it should restore to that version of the firmware.
    Let us know how this works for you. If this method doesn't work either, then I would say it is definitely a hardware problem, even though it already sounds like a hardware problem.

  • Resetting Time Capsule - network is OK, but no longer connects to internet

    I've set up my TC in the past and it's worked fine, but periodic printer or router updates have caused problems and I think I need to completely reset it.
    My setup is an ISP-suppled Orange Livebox Mini router connecting to the internet, an iMac plugged in by ethernet (connects to internet OK) and my TC connected to this router by ethernet. My MacBook Pro then connects wirelessly to the TC network. This setup means I don't need to have two wireless networks, I can disable the Livebox router's wireless network and use only the Time Capsule wireless. However, that's not working. I can create a wireless network with my MacBook Pro but the TC is unable to get an internet connection despite being connected by ethernet to the router. I think I need a total reset but even when I do a manual reset by sticking a pin in the tiny button on the back of the TC, when Airport Utility finds the TC to recreate a wireless network, I find the old settings. I feel this is, or should be, simple stuff as I managed to set it up before, but this time it's just not happening. For a long time I thought this was just a problem with wireless settings on my Lexmark printer and waited for the Apple/Lexmark updates to come through, but now I think my TC settings need to be flushed out. One thing that looks odd to me is the IP address on the TC. It's 169.xxx.xxx.xxx, I thought it should be nearer the range specified by the Livebox router, something more like 192.168.x.x
    thanks.

    Oh joy and happiness, I solved it myself, and I owe it to the community to give some details for the benefit of anyone with the same problem searching on terms like Orange Livebox Mini.
    I solved it by racking my brains till inspiration came - that it was a very very well hidden setting on the router itself that was the problem, nothing to do with Time Capsule. I had called Orange to fix this before, but had forgotten that this little setting needs changing from its default every time you reset the router.
    When you have to reset your Orange Livebox router, they more than likely won't ask about your entire setup, they will get one of your computers working by connecting it by ethernet to the primary ethernet port, numbered '1' on the back and with a red stripe next to it. But there are two, number 2 has a yellow coloured stripe and if your main computer, in my case the (desktop) iMac right next to the router goes into ethernet port 1, you will want to connect your Time Capsule into the second, yellow ethernet port. However, that port is not set to work automatically for anything to connect to, it's set up for digital tv. You need to go into your Orange admin page for the router, found by going to 192.168.1.1 on your browser and logging in (remember 'admin' is the magic and default password to get you in. If you have to do a manual reset because you changed and forgot your password, the magic word gets you back in). Once logged in, select 'services' in the menu on the left, then 'digital tv' and then select the 'disable' button. I know, you'd never have found it and never have guessed that's what you need to do to open up the second ethernet, but you now have two ethernet ports into the router and your TC goes into the second work.
    Also wanted to say that my TC has actually been flawless in its performance. Not always easy for simpletons like me to set up, but the hardware has always worked. Printer updates and, I think, Apple OS updates remain a problem as they can throw the printer off, but I must remember to keep my nerve - TC is basically right on, it's just the various different ways to get at it - Network Diagnostics, Airport Utility that confuse me.

  • My Pavilion A6207c no longer connects to internet and my printers disappeared.

    I cannot connect to internet and I cannot reinstall my printers.  A spooling error appears when I try to reinstall the printers.  I'm looking for driver's to update or recover for the Vista Home Premium OS.

    All Wifi networks. It recognises the name of the networks, then thinks and thinks and doesn't lauch the wifi mode.

Maybe you are looking for

  • Problem exporting a PDF with Helvetica Neue

    I am using InDesign CS6 on Mac OSX 10.8.4. I have a PDF with Helvetica Neue in it. When I export this file to a PDF my client claims that the text is jumbled and appears to be widely spaced/leaded. I've read it's an issue with Helvetica Neue as a sys

  • How can i do to add a field in TAB BIDDER

    Hi expert, Does anyone know how can i do to add a field in TAB BIDDER. I am working on SRM 7.0 in RFX-Bid invitation. In Spro does not exist a structure to do that.  I think that i can do that with webdynpro, but i do not the way. I do not have probl

  • How to import (create) a sales order of configured product from third party web store

    Background: EBS is used for order, produce, deliver and invoice configured products. Oracle configurator is in internal use. Screnario: Start to use third party web store. Configuration information will be loaded into web store. How to import or inse

  • Compare two dynamic variables

    Hello, I'm struggeling comparing two variables against each other as seen below. I have some AD-group names in a csv file, and I have a  variable($getGroup) with results from a Get-ADGrup-query. I'd like to filter out the groups of the csv-file from

  • Language support in iTunes Connect

    Does anyone know how we can specify what languages is supported by the application we are uploading? There isn't any such field in iTunes Connect for this purpose.