Wifi not recognised after 2.0.1.358 update

i am unable to complete setup post updagrade as wifi hw is not being recognised.
the playbook wifi diag on the setup screen also does not show any physical address for wifi.
tried reinstalling update 2 times already.. still stuck with no wifi.
any help ??

Hardeep, if you can connect to your router from a wired computer connection (ethernet cable), try setting it to Wireless G instead of N. I myself have had a LOT of problems with my Playbook and wireless connections since the 2.0.1.358 update and the only way to get on the network now with the Playbook is to use wireless G settings (what works for me was WPA-Personal, WPA2 and TKIP cipher. AES cipher does not work for me. Using TKIP cipher kicks the router down to G levels. Ideally we'd be using WPA2 Only and AES cipher levels for N connections on both 2.4 GHZ and 5 GHZ bands. But by using G settings, the Playbook will connect to your network after that...
Anyhow, I have another post on this myself in the forums and it details my experience. Someone else mentioned that the Playbook OS 2.1 beta solved his problems. I may venture down that road one day to get on at N speeds.
This may all sound like gibberish unless you're pretty technical. So it may be a good idea to call BB tech support and have them assist you.

Similar Messages

System not recognised after failed 10.6.6 update

Hi,
A colleague of mine had an error while installing 10.6.6 on a MacBookPro; I was not able to understand which kind of error, anyway now I'm trying to save the situation.
If I just try to boot, after some minute a stop sign appears in place of the apple.
Disk utility does not report any error.
If I look at the disk as firewire target, files are there, plus an unexpected deferred install folder.
If I try to update from combo, I'm not allowed, perhaps because the system is not recognised.
The same if I try to downgrade to 10.6.3 from the original disk: I'm not presented with Archive&install, preserve user and network option that would be good for that. I can only install as if the disk is new, but I would prefer not to loose contents. What if I go this way? User files remain available?
No Time machine backup available too. I could copy files on another disk, this is possible through firewire, but if possible I would avoid to reconstruct configuration by hand.
Thanks.

Final update: I surrendered. I tried to cancel some of the folders in the target disk, but I was not able to install the system over. So I saved the user home folder, formatted and installed from zero. I felt like a Windows user .

20" Apple Cinema Display not recognised after upgrading to OS 10.8.2 (Mountain Lion)

20" Apple Cinema Display not recognised after upgrading to OS 10.8.2 (Mountain Lion).
Hello Apple! Anybody there? How long does your community have to wait for a solution?
The same problem has been unsolved for months now. No statements from Apple either.
I was told today to wait for 10.8.3. This might solve the issue. I can not belive my ears.
My MacBookPro 4,1, Intel Core 2 Duo with 2.5 GHz Processor and Graphics chip: NVIDIA GeForce 8600M GT, will not talk to the exter. 20" Cinema Display ( Model Number A1081 ). The screen stays black. Resetting the PRAM did not help. I removed the 'com.apple.windowserver.plist' and the 'com.apple.windowserver.OE35739etc,etcxxxxxxxxxxx.plist', but that did not help either.
Any other solutions, or do I have to downgrade or give up on Apple Computers alltogether after using them for over 25 years?

I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

I PHONE 4S WIFI NOT CONNECTING AFTER UPGRADING TO iOS7.1.1

i PHONE 4S WIFI NOT CONNECTING AFTER UPGRADING TO iOS7.1.1

Sorry to hear that.
Do you have a technical support question? If so, please don't hesitate to ask. Also, please let us know the troubleshooting steps you've taken so far.

MSI E350IA-E45 USB Not recognised after cold boot.

Any one else have the same issue? My asus (Bluetooth) BT211 is not recognised after cold boot.
I also found the front USB's losing power when PC turned off. Connected them up to 5VSB to fix the issue.
MSI tech has not been back to me if this is a fault design, My motherboard issue or bios issue? Which also means to charge via front USB not work when turned off.
And to top it off I cannot find an answer to whether the Wake on Bluetooth USB is supposed to work?

Quote from: mickas on 12-August-11, 20:09:58
I also found the front USB's losing power when PC turned off. Connected them up to 5VSB to fix the issue.
How did you connect up the USB ports to 5VSB?
I have a similar issue with a newer MSI board and my USB mouse; I'd have to remove and re-insert the USB connection to the mouse after each cold boot in order for it to be recognized. I did a kludge fix by looping the mouse through a powered USB hub that supplies power to connected devices even when the PC is off.
This MSI board doesn't have a hardware jumper to enable 5VSB to the USB ports, unlike other motherboards. Also, none of the "green" or wakeup settings in the BIOS would cause the USB ports to have power when the PC is off.
So, how do you connect 5VSB to the USB ports? I've heard that crossing the regular 5V rail with 5VSB is a no-no, so I can't imagine how you did it.

Wifi not working after latest iOS update

wif not working after latest iOS update 7.0.4. Any suggestions?

Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

Canon scanner not recognised after Mac wakes up.

Hi
I have been using a Canon LIDE 60 scanner since I bought my eMac 4 or so years ago. It's always worked fine.
But since upgrading to Leopard a few months ago I've been having trouble with it.
What happens is that after the Mac goes into deep sleep mode (it's set to have the hard drive sleep too) and the scanner is not recognised after the computer wakes up.
I get an error message when I open up a TWAIN program (CanoScan Toolbox or Image Capture) saying that there is no scanner available.
Sometimes, usually actually, if I disconnect the USB cable and then re-attach it the scanner becomes available again. But sometimes not.
I have what I believe to be the most recent driver for this scanner, dl'd recently from Canon's web site. First I uninstalled the old driver and then restaterd my eMac before installing the new driver.
I'm using whatever version of Image Capture came with Mac OS and I'm using CanoScan Toolbox version 4.9.3.4 (version 5.0 does not work at all).
Any way to get this to stop happening?

Bump
Joey Goldstein wrote:
Hi
I have been using a Canon LIDE 60 scanner since I bought my eMac 4 or so years ago. It's always worked fine.
But since upgrading to Leopard a few months ago I've been having trouble with it.
What happens is that after the Mac goes into deep sleep mode (it's set to have the hard drive sleep too) and the scanner is not recognised after the computer wakes up.
I get an error message when I open up a TWAIN program (CanoScan Toolbox or Image Capture) saying that there is no scanner available.
Sometimes, usually actually, if I disconnect the USB cable and then re-attach it the scanner becomes available again. But sometimes not.
I have what I believe to be the most recent driver for this scanner, dl'd recently from Canon's web site. First I uninstalled the old driver and then restaterd my eMac before installing the new driver.
I'm using whatever version of Image Capture came with Mac OS and I'm using CanoScan Toolbox version 4.9.3.4 (version 5.0 does not work at all).
Any way to get this to stop happening?
Message was edited by: Joey Goldstein

Iphone 3G wifi not working after upgrade

Iphone 3G wifi not working after software upgrade, no proper fix from Apple. APPLE SUPPORT - R U SLEEPING.......

You are not talking to Apple. This is a user to user forum.
If you're using the iPhone 3G, there will be no fix for your problem. The software you have, 4.2.1, is the end of the line for the 3G. Apple is no longer providing software updates for the 3G.

Internet not connecting after ios 7.0.2 update on iphone 5

Internet not connecting after ios 7.0.2 update on iphone 5

Hi there PompasJr,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Camera isn't functioning
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
-Griff W.

Adobe digital does not recognise my Kobo e-reader following update. Tried factory reset of Kobo and re-installing adobe. Any suggestions please?

Adobe digital does not recognise my Kobo e-reader following update. Tried factory reset of Kobo and re-installing Adobe. Any suggestions please?

The lack of response is deafening. Im guessing then that Firefoix has serious issues then?..well it'll be there loss if more, like me, opt for Internet Explorer and Google Chrome (both these browsers work fine with the latest Flash Player installed)

Chat not working after nokia C3-01 software update...

Chat not working after nokia C3-01 software update from 5.65 to nokia 6.00

when is there's gonna this be fixed it has been more than a month
satisfaction level is decreasing with the product

4s stuck in recovery mode. try to restore apple icon comes up but goes itno recovery again. Itunes does not recognise. I wa trying to update software from laptop to phone and errored 4005.

4s stuck in recovery mode. try to restore apple icon comes up but goes itno recovery again. Itunes does not recognise. I wa trying to update software from laptop to phone and errored 4005.

Hi there Schusski,
I would recommend taking a look at the troubleshooting steps for Error 4005 found in the article below.
iOS: Restore errors 4005, 4013, and 4014
-Griff W.

Why does i tunes keep bouncing and not open after I have done an update

why does i tunes keep bouncing and not open after I have done an update ?

Hello, romani-jo.
Thank you for visiting Apple Support Communities.
Try resetting your System Management Controller or SMC. Try launching iTunes after processing these steps. If the issue persists, try downloading a fresh copy of iTunes by accessing the second link below.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
http://www.apple.com/itunes/
Cheers,
Jason H.

Videos not recognised after updating software

My iPod won't sync my videos. This is for all video files (.mov, .mpv, the lot). They played fine on my video iPod before and they still play in iTunes, but when I try to update, I just get a "file not recognised by your iPod" message. This only happened after I installed the latest updates.
I'm on OSX 10.4.10, latest iTunes and iPod software. This is really annoying-- should have known better than to update mac software when prompted, I guess.

I have almost the same problem - After I had updated, I could still play my music videos on my ipod, but I couldn't download to the ipod. Now, after doing a reset, all video podcasts and new videos appear to be on the ipod but when I play them all I get is the audio track, even for 'old' videos I played before. This applies to movies and tv programs as well, which has upset me more than anything else as the movie I have on my ipod is a short one of my daughters wedding. Come on Apple - put this right - or has anyone else come up with a solution??

Iphone 5 will not connect to home wifi or Bluetooth after iOS 7.1.1 update! Using unnecessary data please help!

My iphone 5 will not connect to my home wifi or Bluetooth after I completed the iOS 7.1.1 update. Before the update I was able to connect to my home network with no issues. Now it rarely finds my home network (unless I'm right in front of the router and even still the signal is weak) and when it does find my home wifi network it frequently disconnects from it. I followed previous suggestions to turn off router or forget network settings and re-establish them but it continues to happen.
This also happening with my Bluetooth connection. My iphone 5 would automatically connect to my home phone Bluetooth prior to the iOS 7.1.1 update. But now my device no longer connects, which means my home phone no longer rings when my cell phone is ringing.
I probably would be less worries if I did not have to monitor my data usage with Verizon. However, I do have a limited amount of data to use and I recently reached the max and had to pay extra money due to my wifi being unable to connect. Can anyone please help me with fixing this?

If you have Applecare take it back to the shop and demand a replacement. If not you're stuffed. It's a bug that they've put in the software to get you to buy another iphone. You can maybe warm it up with an hairdryer near the speaker and then turn it off and put it in the freezer for 10 mins then retstart it and wi-fi is there. It could also be a problem with the chip, if you do the freezer thing it comes back.
Apple knows its a problem as there are millions of people out there that it is happening to, in my opinion get shut and get a Samsung!!!! That's what i've done and love my new Samsung S3 Mini miles better than the iphone!!!!
Go on youtube atnd look how many millions of people this has happened to.
Someone needs to put this in the media so they will actually do something the robbing bleeders!!!!!
Also whatever you put on these discussions will get it wiped if Apple don't like what you put!!!!

Wifi not recognised after 2.0.1.358 update

Similar Messages

Maybe you are looking for