WiFi Not Working After Restore

The WiFi Is Not Working After I Restored My 1st Gen. iPod Touch
*PLEASE HELP!*

luvlabs,
Thanks for attempting to assist in this. Unfortunately the networks around me are not even being seen by my ipod touch. I of course, to answer the dumb question you asked macpolymer, have my wifi settings turned to on. I will attempt the restore/reset again, but I have done that about 3 or 4 times now, can't recall exactly, with exactly the same result.
I need to have this resolved, otherwise I am stuck, as I have lost my receipt for Best Buy.

Similar Messages

Wifi not working after restoring factory settings

Need some help.
I have an iMac with 10.9 and an older Airport Extreme base station (802.11n, I think it is 2nd Gen. Square with an indentation around the sides toward the top).
I had been encountering problems so restored to factory settings.
I went through set-up and the unit glows green. The airport utility shows Internet and Wifi both green. The iMac can access the internet.
However, the problem is with other devices.
iPhone 5 and iPad mini both see the new wireless network but can't connect to it. Spining and spinning and spinning. The iOS airport utility for both devices show internet green and Wifi green. However no connection on either Both will connect to other wireless networks fine.
Thanks in advance.

Try changing the name of the AirPort Extreme wireless network and also the password.
Keep the wireless network name short.....no more than 20 characters. 8-10 would be ideal. No special characters like an apostrophe, dollar sign, asterisk, etc.
Use only letters and numbers with no blank spaces in the name.
Same rules for the password, which must be at least 8 characters
Apple's iOS Troubleshooting Guide is here:
http://support.apple.com/kb/TS1398

Wifi not working after latest iOS update

wif not working after latest iOS update 7.0.4. Any suggestions?

Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

Iphone 3G wifi not working after upgrade

Iphone 3G wifi not working after software upgrade, no proper fix from Apple. APPLE SUPPORT - R U SLEEPING.......

You are not talking to Apple. This is a user to user forum.
If you're using the iPhone 3G, there will be no fix for your problem. The software you have, 4.2.1, is the end of the line for the 3G. Apple is no longer providing software updates for the 3G.

HT1414 wifi will not work after restore

wifi will not work after restore

Se emy response to your other post
https://discussions.apple.com/thread/4862098?tstart=0

HT204409 wifi will not work after restore

my wifi will not work at all

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

TS1398 my wifi still not working after restore and make new iphone my wifi still greyed what shall i do now?

apple need to do something or answer my question,what i need to do over my wifi doesnt work im so disapointed now because i tried all posible solution for it but still my wifi cant be on still in greyed.pls do something...

Hello there, Amer.
The following Knowledge Base article offers up some great basic steps and additional more in-depth steps for troubleshooting the issue you're describing:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Win 7 Wifi not working after upgrading to 10.9.4

After the update I am not able to get Wifi connection on my Bootcamp 5.1.2 with Windows 7 Professional. The wifi icon gets a red X and it can't se any network at all where it earlier could se several networks. Its running on a Macbook Pro Retina, Mid 2012 2,3GHz i7. Also my external keyboard is not working anymore when booting to Win.
Everything was working perfect before the update and somehow it seems like the the Apple Windows support software is not working anymore (I am guessing).
I have tried to download the support software again to a USB and reinstall on Windows but no change.
Since I have been reading that there has been a issue with a Apple wifi update on 10.8 I tried the workaround from that thread and restarted the bootcamp in many different ways but still no changes.
I guess that this requires a new update from Apple - but I can't find any way to report this issue without having to pay for it!
Anyone who are experiencing the same or maybe someone who has a solution I would appreciate it - thanks.

After i reinstalled Bootcamp with Windows 7 it was all working fine again with OSX 10.9.4.
The bad news is that I just updated OSX again to the new 10.9.5 and now I am back where I started again - no network connections.
It can't be a coincide that it is the same pattern again and a bit annoying if the solution is to reinstall Bootcamp every time there is a update - hope anyone can give me some hints?

Windows 8.1 wifi not working after sleep (and other various bugs)

Hello Apple support forum, this is my first post!
Alright, so I just switched to my first mac. MBP Retina late '13. I bought it primarily to run windows, and to also of course use OS10.
My issues in bootcamp however are getting annoying. My Wifi shows up as connected after I resume from sleep, but my mac won't let me disable wifi, enable airplane mode and then re-enable wifi, nothing. The only way to get wifi to work when resuming from sleep is to reboot.
I just set hibernate when close lid on all my power modes, and basically disabled sleep for now. Hibernate works fine for now, but sleep is much faster from resume and also I'm not sure if the machine will wake up from a simple tap on the keyboard or opening of the lid, I think I have to actually boot it all over again anyways.
My other minor but still annoying issue is my titles of windows in windows are showing up as black (screenshot here)
the only other thing I was curious about was the dual-gpu functionality. I know from reading these forums it's probably not possible because of the hardware and software mesh apple created for OSX and their dual-gpu design, how it wouldn't really work in windows. I'm just wondering if anyone ever got this to work in windows maybe on the older retina MBP or older macs, or if anyone is making progress on trying to fix that in windows? I bought this laptop expecting that to work, even the geniuses at the Apple store said it would be possible, I was misled and might have second-gussed buying a 3k machine if it would only get a few more hours battery than my old Vaio. I bought this machine primarily for battery life.
I'm just remembering another tiny tiny issue. When I plug headphones in the headphone jack in windows, it doesn't automatically switch to that audio output, I have to manually do it in audio settings, is this a bug, have I configured something incorrectly, and is there a fix?
One other thing is my dpi settings, I have it set to a larger font and everything because at stock it is SOOO tiny. my question is, is there any way to smooth out text in other apps, my browser and apps like rdio look like crap unless I leave the dpi settings stock, which I basically need a magnifying glass to use (I tried that for a week lol. Not the magnifying glass tho haha)
I know I'm rambling at this point, but in the windows 8.1 camera app, sometimes my camera does this bug where it flips between inverted and normal, extremely quickly, so it looks like there are two of me. I don't know if this was GPU drivers tho, because just reinstalled those this morning and it seems to be ok so far.
also, the keyboard. I miss my context menu key, what do I need two command keys for? A right alt button, I'd rather have that be the other control button. Any way to remap these easily? what about switching Fn with control on the left, I prefer my windows button in the exact corner.
last question tho, I saw people overclocking gpu's on their retinas from last year, can you do this on the new retinas, and can you overclock the cpu as well as the gpu?
I do have to say this in the end, I am a little dissapointed with apple, I was told thst my mac would run windows like a native windows machine. I know windows 8.1 is not supported, but coming from PC's for years, and being a PC technician, I also go to school for computer engineering, I expected everything to "just work" as steve jobs once said. Well, it doesn't just work. I even had these issues in windows 8, which is supported.
Installing windows 8 was a nightmare. I had to use the forums, try for weeks to get windows 8 to finally instll the proper (uefi) way, and to get everything usable, I had to reinstall my os's twice.
Apple, if you are going to advertise a mac that can run windows "seamlessly", you need to get these major issues fixed, support all new versions of windows before they are even release, and release proper hardware drivers and support software before new hardware is released. All other Windows OEMS are pretty much required to do this to stay in business. I don't dislike OSX, I just use windows for everything I can't use Mac for, so please fix this. You're better than this, you should put a higher standard on this. otherwise, don't advertise macs that can run windows.
Thanks guys, sorry for the information overload. BTW, MBP Retina 15" 16GB RAM 512 SSD, 2.6 haswell, pretty much the max specs other than the SSD.

I have stated every issue I’ve had so far in a fairly clear and concise way. I think if you read what I wrote, it all makes logical sense as to what is going on. Windows 7/8 would work just as well on a Mac if it was supported the same way the OS is for other OEMs.
As I stated earlier in the post, I’m having these same issues in windows 8, not just 8.1, which is the reason for the post. I know the difference between supported by drivers and not supported by the manufacturer. The fact that when Haswell mbp’s came out and no revision to bootcamp for the new hardware was released to fix issues with installing windows on the new hardware shows Apple clearly Is not supporting bootcamp as strongly as they advertise.
I am being realistic on Apple having drivers early. Anyone with an MSDN subscription can download the RELEASE version of windows months ahead of the actual release, I’m 100% sure if any average consumer can do that by paying $100 and saying they are a developer, apple can do it just as easily.
You aren’t much help, you haven’t answered really anything to my post, nor have you contributed any knowledge that wasn’t clearly posted above, so don’t say anything if you don’t have anything to contribute.
By the way, my rant is directed at apple, as you can see because I am saying “Apple, if you are going to…” because this is an Apple forum on Apple’s website. It is not directed to end users, clearly.

WiFi not working after update to ios 5.0.1

Original iPad - after restore and set up as new iPad with 5.0 setting bar on left side of screen say "No wifi". Wifi router is fine, all other devices are working, including 2 iPad2s. Have tried to restore and sync with iTunes twice with same results. Any way to reset?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
 Cheers, Tom

MMS over WiFi not working after Sense 6 Update

A week ago Monday, the Sense 6 update hit my phone. Once loaded, I could no longer send MMS over WiFi, stream Google Play Music over WiFi, access my content on Google Play Books, or back up my pics to Google Cloud over WiFi. After several days of e-mails back and forth with HTC, it was determined that I had to perform a Hard Reset and lose all my information. This after clearing the cache, re-booting, various Safe Mode re-boots, etc. Nothing worked. I finally gave in and performed the hard reset. Now, the only thing NOT working is MMS over WiFi. I've tried other WiFi networks and still no MMS functionality. After about 10 minutes, I get a red triangle next to the message and an error notification, "Generic Network Failure."
This is going to start costing me money. Like so many of us, I no longer have unlimited data. Now, every time I want to send an MMS, I have to use my data plan. Not cool. I'm hoping that someone sees this and is working on the problem. I love my HTC One (M7), I really do. But, we're talking basic smart phone functionality. Without it, I'll be looking for another phone, and perhaps even another carrier. I'd prefer not to do that, but so be it. Please, Verizon, a little help?
For what it's worth, the MMS does this first. Notice the little MMS icon with the clock lower right...it just hangs there first...and sorry about the shoe pic.
Next, it does the Red Triangle thing...
And that's all I know. Perhaps someone here, or a kindly VZW employee will see this and take pity. Thanks!

I am having the exact same issue with my HTC one, which started immediately after updating to sense 6. Very annoying since I do not have unlimited mobile data plan, so I have to manually turn mobile data on each time I want to send or receive mms texts, including texts with multiple recipients. Did not have this issue before the update. Love this phone, my very first smartphone. But it is hard to believe that I was able to send pics over text with my old flip phone with no data plan. And now I can't with the HTC. I just can't have the mobile data on at all Times. It has become very inconvenient ever since the upgrade. Wish I had never done sense 6.

Time Machine backup over wifi not working after upgrade to 10.6.3

I have a firewire external hard disk connected to directly into my imac which I use for back-up. The imac is wired into an ethernet LAN. I also backup my MacBook Pro to the same hard disk. The MacBook is connected to the backup disk via a wifi link to a router. All has been working well until I upgraded Snow Leopard to 10.6.3 and now the back-up is not working for the MacBook. The same thing happened after the last point release upgrade but at the time I thought it must have been user error. Last time I had to trash the backups and start from scratch. Can anyone shed any light?

Try reselecting the drive (from the laptop) via TM Preferences > Select Disk (first select the "none" drive, then the correct one).
If that doesn't help, try a "full reset" of TM on the laptop, per #A4 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.

Time Machine not working after Restore.

Yesterday, for reasons I could not ascertain, OS X died on me. After much fannying about, I put in my Leopard install disc and restored the OS from a Time Machine backup. No problems at all. Good job Apple. Apart from a few stray emails, everything worked as far as I could tell.
Except, Time Machine no longer works. Backups are failing and I'm not sure why… can anyone help?

I am experiencing exactly the same thing after restoring my hard drive from a Time Machine backup. I checked my backup log and I got the following messages:
12/20/07 9:49:11 PM /Library/Application Support/LaCie/LaCie Backup/laciebackupd.app/Contents/MacOS/laciebackupd[120] laciebackupd could not register hot key: -9878
12/20/07 10:02:51 PM /System/Library/CoreServices/backupd[329] Backup requested by automatic scheduler
12/20/07 10:02:51 PM /System/Library/CoreServices/backupd[329] Starting standard backup
12/20/07 10:02:51 PM /System/Library/CoreServices/backupd[329] FSMatchAliasBulk returned -35 while resolving alias to backup target
12/20/07 10:02:51 PM /System/Library/CoreServices/backupd[329] Backup failed with error: 19
12/20/07 10:02:51 PM /System/Library/CoreServices/backupd[329] 10 days since last backup
12/20/07 10:03:25 PM /System/Library/CoreServices/backupd[329] Backup requested due to disk attach
12/20/07 10:03:25 PM /System/Library/CoreServices/backupd[329] Starting standard backup
12/20/07 10:03:25 PM /System/Library/CoreServices/backupd[329] Volume at path /Volumes/Time Machine Backups does not appear to be the correct backup volume for this computer.
12/20/07 10:03:25 PM /System/Library/CoreServices/backupd[329] Backup failed with error: 18
12/20/07 10:14:41 PM /Library/Application Support/LaCie/LaCie Backup/laciebackupd.app/Contents/MacOS/laciebackupd[120] laciebackupd could not register hot key: -9878

After restoring definitions iphone 3gs does not works, after restoring definitions iphone 3gs does not works

after restoring definitions iphone 3gs does not works

What do you mean by "restoring definitions"?
What EXACTLY is your problem?
"does not works" is just a bit vague.

Wifi not working after upgrade

This morning, after the upgrade of mij MacBook to OSX 10.8.5 my wifi is not working anymore.
Technically it is ok, in recover mode, it is working, so it is a software problem.
Is this a known issue?
Regards,
Eric

There have been a lot of people having this issue...Especially the 2008 model which is the unibody aluminum version. Found that they have to revert back to 10.8.4 to get it working again.

WiFi Not Working After Restore

Similar Messages

Maybe you are looking for