Wifi not working in my windows 8.1

Its showing limited when I connected yo a wifi network. Ethernet is working. If I go back to windows 8 again wifi is working. Please give a solution.

I am having the same issue. I have searched for a solution and tried everything I have found on the internet, yet nothing is working. I have uninstalled and reinstalled my drivers and everything. Must have wifi for school so this update is sucking for me. How do I fix it?!

Similar Messages

Wifi not working with bootcamp windows 7 install

I have installed window 7 enterprise via bootcamp however I can't get my wifi configured. Windows does not see the built in wifi. So I cant get to the outside world nor configure a wifi printer in window. Everything still works perfectly in OS 10.6.6. Any advise on how get to get the wifi working in windows would be great.

It is not a driver problem, but a problem in the BIOS emulated by bootcamp on some (not all) MBP models. So unless Apple fixes it in bootcamp, there is no real solution. And obviously, Apple doesn't care. They are dropping the Expresscard slot anyway.
Unfortunately, this poster seems right: http://forums.macrumors.com/showthread.php?t=912259 :
The 2008/2009 Macbook Pros don't allow to use the ExpressCard slot because of EFI/Bootcamp errors (Windows Vista/7 cannot allocate an IRQ to the slot). You don't need any drivers for using an ExpressCard slot on Windows, you only need the drivers for the corresponding card you are using.
Bootcamped XP allowed to use the slot, but you could not use hot-plugging.
And from the Sonnet site ( http://www.sonnettech.com/product/tempo_sata_express34.html ) :
Tempo SATA ExpressCard/34 not supported under Windows 7 or Windows Vista when running on unibody MacBook Pro computers. The problem is caused by the MacBook Pro's BIOS emulation, which doesn't allocate enough resources to support certain kinds of Expresscard/34 devices, such as a SATA controller, in these operating systems.
(added link to Sonnet's explanation)

I buy a new compaq presario cq57 408tu but its bluetooth and wifi not working even installing driver

i buy a new compaq presario cq57 408tu laptop , but its bluetooth and wifi not working even installing all driver

Hey there. You didnt state what operating system you are using but I was able to find two articles that should help resolve your issue.
Troubleshooting Your Wireless Network and Internet Connection (Windows 7)
Fixing Bluetooth Issues
These articles will go through all the basic troubleshooting steps. Let me know if this helps resolve the issue at all.
Thanks!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Network controller& USB controller driver not found and wifi not working

hello I Purchased HP 15-ac025TX (M9V00PA) Notebook laptop . i have installed all driver from HP site here is the link  http://support.hp.com/in-en/drivers/selfservice/HP-15-Notebook-PC-series/7771404/model/8326084#Z7_3054ICK0KGTE30AQO5O3KA30R1  but still netwok controller driver not found also wifi not working i installed blutooth drivers too . I am using window 7 sp1 (32 bit) For network controller device ID is PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C&REV_01 secondly univeral serial bus driver(usb) controller not found i installed all drivers from above link also update windows but still no solution hardware id of usb controller is PCI\VEN_8086&DEV_9CB1@SUBSYS_80C2103C&REV_03  and last i am unable to download AMD/Intel Switchable High-Definition (HD) Graphics Driver. the download link not working KINDLY RESOLVE THE ISSUE THANK YOU

Update: While the driver I knew would work has not shown up yet, I did some detective work and explored some other broadcom wireless card driver folders from some HP links, and I found one that should work for you. While it says it is for HP desktop PC's, they put the exact same wireless card form factor in a desktop PC that they do in a notebook PC. I see no reason why this driver would not work, since the setup information file contains the same hardware ID that you posted. Here is a partial copy and paste of the driver setup information file and you can see the hardware ID you posted is supported by this driver.  x86 - Win7
[BROADCOM.NTx86.6.1]
    %BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_2230103C
    %BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_22D3103C
    %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_2232103C
    %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_22D4103C
    %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_149257_1

Hi, i am not able to connect to the internet. wifi not working.

hi, i am not able to connect to the internet. wifi not working. not able to find proper drivers for 32 bit win.7 os. need urgent help..
This question was solved.
View Solution.

Hi:
I can give you the link to the wifi driver, if you do the following steps to post the hardware ID for the wireless card, so I can figure out what model wireless card the notebook has...
To find the hardware ID, go to the device manager and click on the device labeled Network Controller.
Then click on the Details tab at the top of the Network Controller window.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that list and select the second item (Hardware ID's).
Post the top string of characters you see in the window.

Ethernet and wifi not working on g6 1318ax

Sir, my laptop is HP g6 1318ax. When I buy this lap I installed windows 7 but now format it and installed windows 8. But after installing the windows 8 the ethernet port and wifi not working. I download and install hp recommend drivers for win8 but it is not working. Please help me to solve this problem.

Hi: Below are the links to the PCI and touchpad drivers. http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110518-1&cc=us&dlc=en&lc=en&os=4132&product=5278311&sw_lang= http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110512-1&cc=us&dlc=en&lc=en&os=4132&product=5278311&sw_lang= Unfortunately, I don't know why the wired network adapter isn't working. I'll give this one more try and if this driver doesn't work, then I don't have any idea why. http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4132&swLang=13&mode=2&taskId=135&swItem=ob-110949-1

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already have it installed...

1.      Are you getting any error message?
2.      Which browser are you using?
3.      Were there any recent changes made on the computer prior to the issue?

Flash player does not work properly on Windows 7 32 bits

Hello,
My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
In fact, it works correctly on some sites, like youtube, but not on some others like :
http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
http://www.myspace.com/ => no audio player, right click gives flash context menu
some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
No problem too with flash player on http://www.adobe.com/software/flash/about/
But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
I cannot check boxes,
My changes are not saved.
In most of flash animations, videos, ...,
when I click on parameters, I cannot do anything, even closing.
when I am in full screen mode, the message "press escape to exit...." does not disappear.
Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
Thank you for your help

Hi eidnolb
Thanks for your answer.
This is what I have :
Verify user permissions
I have an administrator account.
I tried (uninstall, install and run) with super-administrator account for same results
Install the most current version.
I am running the latest version (10.0.45.2)
Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
I did not "clean" my computer.
Troubleshoot Pop-up blockers
I have no Pop-up or esle blocker software.
Ensure that Internet utilities do not block Flash Player
I tried (uninstall, install and run) without Avast.
I have windows 7 firewall. I do not know where I can allow ActiveX controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
Fix machine crashes when displaying Flash content
I have no freez or crash.
Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
Using FF, I have SWF vs 10.0.45.2 and it is Enabled
I really do not understand !!
Thanks,
Ju'

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

ExpressCard/34 not working in BootCamp Windows 7 64-bit. Apple's BIOS emulation does not give enough resources.

MacBook Pro unibody, 15" 2009
ExpressCard/34 (Card is by Transcend TS-RDF1, JMicron chip for SD card) is not working in BootCamp Windows 7 64-bit. Windows reports:
"This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system."
Other data points: Card works fine in Mac OSX, worked under Windows XP 32-bit (initially reported same problem, but works after reboot).
Checking the forums there seems to be no actual device suggested to actually remove that would help the problem. And even if it was, the concept is ridiculous. What other device would you like to remove? Display adapter? Network adapter? No way. I use all available devices and don't want to compromise.
It seems like BIOS emulation does not allocate enough resources to ExpressCard.
Are others having the same problem?
Does anyone have a fix for this?
Is there anyone at Apple who cares to provide a solution?

It is not a driver problem, but a problem in the BIOS emulated by bootcamp on some (not all) MBP models. So unless Apple fixes it in bootcamp, there is no real solution. And obviously, Apple doesn't care. They are dropping the Expresscard slot anyway.
Unfortunately, this poster seems right: http://forums.macrumors.com/showthread.php?t=912259 :
The 2008/2009 Macbook Pros don't allow to use the ExpressCard slot because of EFI/Bootcamp errors (Windows Vista/7 cannot allocate an IRQ to the slot). You don't need any drivers for using an ExpressCard slot on Windows, you only need the drivers for the corresponding card you are using.
Bootcamped XP allowed to use the slot, but you could not use hot-plugging.
And from the Sonnet site ( http://www.sonnettech.com/product/tempo_sata_express34.html ) :
Tempo SATA ExpressCard/34 not supported under Windows 7 or Windows Vista when running on unibody MacBook Pro computers. The problem is caused by the MacBook Pro's BIOS emulation, which doesn't allocate enough resources to support certain kinds of Expresscard/34 devices, such as a SATA controller, in these operating systems.
(added link to Sonnet's explanation)

How to fix iphone 4s wifi not working

How to fix wifi not working on iphone 4s after it is updated to ios 7 ?
Here is what fixed my wife's phone after several weeks of no wifi. We had removed the Sims card and transferred to another phone which was running ios 6. My son was visiting and said Apple had come out with an update a few days ago and he decided to attempt to install it on the 4s phone that had no wifi and no cellular because the sims card was removed. He tapped the icon to update the new ios version and received the message to the effect that No WiFi available would you like to search for available networks. He selected yes and immediately the wifi came on and has been working now for two days. Also we never installed the update to the new ios.
My advice is to remove your sims card like we did or trun off your cellular and attempt the update to see if you get the message to search for available networks and then of course choose yes. Go figure. Hope this works for you.

Read this http://support.apple.com/kb/ts1398

Wifi not working after latest iOS update

wif not working after latest iOS update 7.0.4. Any suggestions?

Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

HD Audio is not working in bootcamp windows in mac mini 2012

HD Audio is not working in bootcamp windows in mac mini 2012

Update to the latest bios: https://forum-en.msi.com/index.php?topic=163918.msg1260356#msg1260356 (Follow the guide)
>>Clear CMOS<<
Afterwards update the Intel Management Engine Driver in Windows.
Reboot and afterwards install current Realtek drivers: http://www.msi.com/service/download/driver-22481.html

Iphone 3G wifi not working after upgrade

Iphone 3G wifi not working after software upgrade, no proper fix from Apple. APPLE SUPPORT - R U SLEEPING.......

You are not talking to Apple. This is a user to user forum.
If you're using the iPhone 3G, there will be no fix for your problem. The software you have, 4.2.1, is the end of the line for the 3G. Apple is no longer providing software updates for the 3G.

My sound is not working after downloading windows 10

My sound is not working after downloading windows 10 please can you help me?

right click start then select device manager see if there are any yellow ! in triagle symbols next to any device if there is you may need to reinstall the audio driver

Wifi not working in my windows 8.1

Similar Messages

Maybe you are looking for