Wifi not working latest mac update

I Have just done the latest software security update and now my wifi does not work I have tried turning it off and on and everything in between but I am having no joy at all. I can access the internet through my phone using it as a hotspot for the same WIFI network the the system just won't let me access the Wifi through my MAC.

Try Wireless Diagnostics.
Wi-Fi Problems in OS X Yosemite
Wi-Fi Problems in OS X Yosemite (2)
Wi-Fi Problems in OS X Yosemite (3)
Wireless Diagnostics
Also try turning off Bluetooth.

Similar Messages

Wifi not working since both updates

I have read that a lot of people are having the same issue as me (wifi button not working - it is greyed - every since the 6.1 update and now the 6.1.1).. all I want to know is what will Apple do when I take my phone into store (I have an appointment on Saturday) ?
I have done everything; resetting everything including network settings, restoring from back up and as a new iphone, let the battery drain and try it and I have seen the suggestion of putting the phone in the freezer, but for some reason that doesn't sound very clever...
So yeah, will Apple replace the phone (I am under warranty) or will they send it off for repair?
Cheers

You're in the right direction! Go to your local Apple Store and get it resolved. Most likely, they will replace the device.

Wifi not working on mac air windows 7

i cant get connected to internet after installing window 7 on my new macbook air no wi-fi bars in the tray,any help will do

Have you installed the Windows support software?
If not, restart your Mac, hold the Option (Alt) key while your Mac is starting and choose your OS X volume.
After starting up, open Boot Camp Assistant (in /Applications/Utilities), press Continue, and tick only the option to download the Windows support software. Then, follow its steps to burn it into a USB drive.
When it has finished, restart in Windows, access to your USB drive from Windows Explorer and run the installer. Your drivers will be installed, and after a simple restart, you will have Wi-Fi

C7 Wifi not working after Anna update

Hello friends,
I have a Nokia C7. Although some minor issues were their, my phone had been working fine since I bought it. However, last month I got the Latest Symbian Anna update on my phone. After that, my phone's wifi has stopped working completely. It does not even detect any wlan connections that are available.
Also, there are problems with the phone's music player which keeps hanging after short instances.
I have reinstalled the os once but that did not help at all.
I would surely be very glad if someone could help me solve my phone's wifi problem.
Thank you.

sdaadil wrote:
Hello friends,
I have a Nokia C7. Although some minor issues were their, my phone had been working fine since I bought it. However, last month I got the Latest Symbian Anna update on my phone. After that, my phone's wifi has stopped working completely. It does not even detect any wlan connections that are available.
Also, there are problems with the phone's music player which keeps hanging after short instances.
I have reinstalled the os once but that did not help at all.
I would surely be very glad if someone could help me solve my phone's wifi problem.
Thank you.
Reset the C7. Dial *#7370# reformat, you'll lose all data. Make a backup first and restore without the settings.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Yoga 2 Pro wifi not working after driver update

Hi all, I just updated my brand new Lenovo Yoga 2 (13") from Windows 8.1 to Windows 10. But after doing so, I cannot establish any WiFI/W-LAN-connection! If I go to the settings for network adapters in the system settings, I even caanot find the wireless LAN adapter as if it was not installed at all! Can anyone help me? Is there any source for new drivers or something else to fix this?Thanks a lot and best regards from GermanyJohannes

Hello all. Fisrt of all, this are my specs: Yoga 2 pro 13". WiFi card: Intel(R)Dual Band Wireless-AC 7260. I bought it from Best Buy on November 27, 2014. If you aquired your Yoga before this date, you may have the single band WiFi card. As many of you have experienced, I also had a bunch of issues with my WiFi connectivity and this is how I was able to solve it. At least it has been a couple of days that I haven't had any issues. The first symptom was the usual connection drops every X amount of time. For me it was about every 2 hours. I first unchecked the "Allow the computer to turn off this device to save power" option in the Power Management tab of device manager and disabled U-APSD support in the Advanced tab of device manager. This action did not solve the problem. I then downloaded and updated the driver from the Intel web site (http://www.intel.com/p/en_US/support/detect) and this seemed to solve the drops; however, a new problem arised: Everytime my Yoga would wake up from sleeping mode, all my wifi networks were gone and the adapter showed as disabled in Device Manager. I would have to anable it to have my networks back. It was a solution but a pain the butt to have to do this everytime. After hours of reading post after post in several forums, I read a repy from Lenovo asking to try leaving the "Allow the computer to turn off this device to save power" CHECKED if you were using the latest version of the driver. I went back to device manager and checked it back and that seems to have solved the problem. So far I haven't had any drops and everytime my laptop comes back from sleeping mode the WFi connection is still there! Here is a recap of how everything ended up: -The driver version I installed is 17.1.0.19-The driver date is 7/21/2014-In device manager|Advanced, U-APSD support is Disbled.-In device manager|Power Management, "Allow the computer to turn off this device to save power" is checked. Hope this helps somebody else.

WiFi not working properly after update

I've only just got (last wednesday) my Blackberry Curve 8520 on Virgin Mobile free internet tariff, and since I got in I've been able to connect to my home WiFi network, no problem.
However this morning I installed the 5.0 operating upgrade, mainly for the newer versions of BBM etc. First I realised that not only had it removed Facebook, but also BB App World, which was not reappearing once re-installed. This I fixed; but my WiFi icon is now permanently grey, even though my home network name appears on the home screen, all WiFi options are turned on and I can access the internet on the browser.
This means I can access the internet, tho I cannot receive emails, re-download Facebook or use BBM, as I'm not in a mobile network covered area at home (at least, it is constantly on SOS). Any help would be fantastic!! Should I return to the old OS? Or is there a simpler solution? I've tried re-adding the WiFi address.

Hi and Welcome to the Forums!
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB):
1) Register HRT
Homescreen > Options > Advanced Options > Host Routing Table > (it does not matter which line is current) > Register Now
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

IPad Mini wifi not working even after updating to 6.0.2

I have updated my ipad mini to 6.0.2 still it says "Unable to join the network". I have tried everything possible Restored it to the factory settings, erased network settings, hard reset ipad (as told by apple personnel). Also the following, as suggested by many:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best)
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
Have also, removed encryption settings from my router even in that case it does not connect. HELP PLS !!!!

I have the same issue, nothing I did fixed the problem, I would suggest if you can visit apple store and give us your feedback with them.
for me I can't go to apple store because I don't have any store near me, I will have to wait for 2 months to travel!

Satellite c55 - wifi not working after windows update

Laptop is running windows 7. Laptop rebooted itself and did a windows update, once i logged into it, the wifi is not located. This is the update that ran today. Update for Windows 7 for x64-based Systems (KB2952664)Installation date: ‎7/‎28/‎2015 11:44 AMInstallation status: SuccessfulUpdate type: RecommendedInstall this update to resolve issues in Windows. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.More information:
http://support.microsoft.com/kb/2952664Help and Support:
http://support.microsoft.com Help!

Kim, a Restore point should have automatically been made by Windows BEFORE processing the update. You should run System Restore using that restore point and then HIDE that update so that it isn't ever installed again.

Wifi not working after latest iOS update

wif not working after latest iOS update 7.0.4. Any suggestions?

Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

After i updated to ios6.1 my 4s wifi not working anymore it greys out..how will it fix..plz apple do something

after i updated to ios6.1 my 4s wifi not working anymore it greys out..how will it fix..plz apple do something

I have the same problemafter upgrade to IOS6.1. I guess now iPhone5 is on the market, Apple is probably rubbing they hands hoping that people will move on. I have bought a Samsung Galaxy S4 since and will not be going back to iPhone.

My own built fullscreen mode flv player is not working in Mac OS

I built a flv player, it is just a normal video player with a
fullscreen mode.
The video player is work fine in Window IE, FF, and Safari.
But not not working in Mac OS X, leopard & tiger &
May I know what might cause this problem?
I m usng action script 3, flash cs3 & all my browsers
already upgrade to latest version of Flash Player.
Help!!!

I am running Mac OS X 10.10.1 Yosemite and iPhoto Version 9.6 (910.29). Automatic updates in the Mac App Store is turned on for my iMac and it shows no updates available. I was told directly by Apple Support on the date that I wrote this article (Nov 8, 2014) that there were no Canon drivers and photo transfer software that worked with Yosemite. I was told by Canon that the workaround was to change the communication method from Normal to PTP on the camera, which did provide a solution. At that time I was running Mac OS X 10.10 (because the 10.10.1 update was not yet available) and the most up-to-date version of iPhoto for Mac OS X 10.10 that was available at that time, at least per the Mac App Store. I was told by Canon that the workaround was to change the communication method from Normal to PTP on the camera, which did provide a solution.
With the Mac OS X 10.10.1 update if the camera is in PTP communications mode the thumbnails now appear in the Import screen in iPhoto almost immediately. If the camera is returned to Normal communications mode; however, it takes forever for the thumbnails to appear. I have been waiting 10 minutes and iPhoto has generated only 14 thumbnails. So it appears that there is still something not working properly between the original Canon EOS Digital Rebel and Mac OS X Yosemite 10.10.1 when the communications mode on the camera is set to Normal.

Adobe Air not work on Mac OS X Yosemite

Related issues:
Adobe Air not working on Mac since OS X Yosemite upgrade
Adobe Air isn't working with Mac OS X Yosemite?
Bug report: Bug#3847656 - Adobe Air not work on Mac OS X Yosemite
When I try to install any AIR application on OS X Yosemite (updated last week) I have got error ""Adobe AIR Application Installer" is damaged and can't be opened.".
Uninstall and re-install AIR runtime didn't solve this issue. It works fine with Mac OS X Yosemite beta.

It works fine with latest Adobe AIR Runtime (this week update).

Mic Jack not working after Driver Update, Console unavailable, can't install

LMic Jack not working after Driver Update, Console unavailable, can't install? I've had nothing but problems after downloading the latest updates via the auto-updater.
I'm currently using the Creative SB X-Fi Pro Series card. I've had it for close to 6 months and have not had any issues until I ran the auto-updater last night, and while it downloaded over 250Mb of updates, all of them failed to install as described below.
I'm running on Windows Vista Ultimate, 64-bit
My main issue is the fact that my microphone is no longer working. I've done a lot of searching and I think the problem has to do with flexijack not being a microphone jack, but instead is an 'in-line' jack. I can no longer find my audio control console, which allows me to switch between gaming and entertainment modes, ect. The solution I found on the KB says that you can switch the blue jack on the back of the card from an in-line jack to a mic jack within the Audio console. I tried downloading it, but while going through the install, I get an error saying the files could not be found and a prompt which asks for a disk or file location. The same thing pretty much happens with all of the items I attempted to download and install.
I was able to run console fine, as well as use my mic yesterday before I attempted any updates. I attempted the updates because since I've had the card, I've had issues where after I exit a game, all my sound will become crackly and static. Before, I would simply open up the console and switch back-and-forth from gaming to entertainment, which would fix the problem most of the time. If that didn't work, a restart would fix it, but now I've opened up a whole new set of issues.
Any help would be greatly appreciated.
I also want to say that the support tickets should not require a serial number to submit a new ticket. My product is registered, so I got rid of the box which contains all that information, leaving me at the mercy of these boards...

Hello all. Fisrt of all, this are my specs: Yoga 2 pro 13". WiFi card: Intel(R)Dual Band Wireless-AC 7260. I bought it from Best Buy on November 27, 2014. If you aquired your Yoga before this date, you may have the single band WiFi card. As many of you have experienced, I also had a bunch of issues with my WiFi connectivity and this is how I was able to solve it. At least it has been a couple of days that I haven't had any issues. The first symptom was the usual connection drops every X amount of time. For me it was about every 2 hours. I first unchecked the "Allow the computer to turn off this device to save power" option in the Power Management tab of device manager and disabled U-APSD support in the Advanced tab of device manager. This action did not solve the problem. I then downloaded and updated the driver from the Intel web site (http://www.intel.com/p/en_US/support/detect) and this seemed to solve the drops; however, a new problem arised: Everytime my Yoga would wake up from sleeping mode, all my wifi networks were gone and the adapter showed as disabled in Device Manager. I would have to anable it to have my networks back. It was a solution but a pain the butt to have to do this everytime. After hours of reading post after post in several forums, I read a repy from Lenovo asking to try leaving the "Allow the computer to turn off this device to save power" CHECKED if you were using the latest version of the driver. I went back to device manager and checked it back and that seems to have solved the problem. So far I haven't had any drops and everytime my laptop comes back from sleeping mode the WFi connection is still there! Here is a recap of how everything ended up: -The driver version I installed is 17.1.0.19-The driver date is 7/21/2014-In device manager|Advanced, U-APSD support is Disbled.-In device manager|Power Management, "Allow the computer to turn off this device to save power" is checked. Hope this helps somebody else.

Q5 - Post Upgrade 10.2.1.537 Wifi Not working

I upgraded my Q5 to latest version of OS. Wifi setup seems to hang and not connect to any available networks. I cannot delete any registered network. It just keep trying don't know what. Doesn't show any new available networks.
Not sure where is the problem and how to touble shoot the same.
Sweety
Solved!
Go to Solution.

Hi All,
Two issues I faced, Wifi not working and Mobile Hotspot giving message 'Regulations in country doesn't allow'. Here what I did to resolve and make it work:
- Change the Timezone to Alaska or some other country and then try the hotspot, it should work
- Shutdown the device and start after 30 Seconds (PS restart as part of OS upgrade is not complete), suggestion is to have a clean reboot of the device after upgrade
- Revert back to old Timezone post restart
It worked for me. I will monitor for couple of days and then post any more update.
Sweety

Tata Photon max on Huawei EC 315 is not working on Mac OS X 10.10

Hi All!
I have bought a Tata Photon max WiFi (Huawei EC 315) dongle, which is not working on Mac OS X 10.10.
Does anybody know what is the problem?
Do I need a different dialer?
Do I need a new driver for the Huawei dongle?
I didn't find satisfying solutions on Tata or Huawei homepage!
Who can help me to get this run?
I would be happy to get any feedback on my questions.
Thanks in advance for your comments.
MacMoe

Hello, please check this step by step video tutorial youtube to solved problems huawei modems on mac os x 10.10 Yosemite....Works perfectly!!! :-)
https://www.youtube.com/watch?v=jBM8qoV9VkM

Wifi not working latest mac update

Similar Messages

Maybe you are looking for