WiFi not working since upgrading to IOS 7.1.1 on iPhone 4

Can't connect to any WiFi since the IOS upgrade. Ive reset networks, turned airplane mode on/off and powered phone off and on. Nothing works!
Is this a known bug? Any fixes available?

No, it's not a bug. It is most likely an issue with your specific device.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue persists, take the device to Apple for evaluation.

Similar Messages

Wifi syncing not working since upgrading to iOS 6

Has anyone had an issue with and found a solution to wifi syncing after upgrading to iOS 6? I have not been able to get either my iPhone 4 or 3d gen iPad to sync since upgrading last week. I have the latest version of iTunes. I've tried disabling wifi syncing and the closing/restarting iTunes. I've tried turning my iMac's wifi off and on. The devices show, but will not automatically wifi sync.
Thanks in advance!

I have a variation on that problem. I upgraded my iPhone 4s and my new iPad to iOS6. No problems synching the new iPad to iTunes wirelessly. My iPhone will not sync wirelessly unless I turn it off, then on again. However, if the phone goes out of wireless range, then returns, it will no longer sync wirelessly to iTunes. Otherwise, the wireless connection appears to be working, e.g., I can connect to the internet.

HT4972 wifi not working after upgrade to iOS 5.1.1

Upgraded to iOS 5.1.1 and wifi is not being recognised. In the settings>General> wifi is greyed out and says no wifi. I know it is nothing to do with my home network as no other network in the area is showing up either. Other than restoring is there any other 'fix'. I have seen similar complaints from others. Is apple doing anything about it? Grateful for any solution, it is driving me crazy.

I HAVE FOUND A FIX FOR THIS PROBLEM AND HOPE IT WORKS FOR ALL OF YOU
fix wifi for iphone 4s running on ios 5.1.1(USING WINDOWS COMPUTER)
STEP 1 : CREATE AN AD-HOC NETWORK IN YOUR COMPUTER... GO TO THIS LINK http://windows.microsoft.com/en-US/windows-vista/Set-up-a-computer-to-computer-a d-hoc-network
STEP 2: ASSIGN A NAME AND MARK SECURITY AS NONE ,BECAUSE WE NEED A OPEN AD-HOC NETWORK
STEP 3: SWITCH ON WIFI IN YOUR IPHONE 4S(i dont know if this works for iphone 4/3gs/3g)
STEP 4: TAP ON OTHER
STEP 5 :TYPE THE NAME OF THE AD HOC NETWORK WHICH YOU ASSIGNED AND CLICK CONNECT
STEP 6: IT WILL SHOW FAILED TO JOIN AT THE TOP,OR SOMETIMES IT WILL SHOW FAILED TO JOIN THE NETWORK (name)
STEP 7: REPEAT THIS STEP TWO TO THREE TIMES AND TO THREE TIMES AND YOU SHOULD SEE THAT YOU ARE CONNECTED TO YOUR AD HOC NETWORK
STEP 8 : AFTER THIS DISCONNECT AD HOC NETWORK FROM YOUR WINDOWS COMPUTER AND THEN SCAN FOR OTHER NETWORKS ON YOUR IPHONE 4S .......VOLA!!!!!...ALL NETWORKS NOW POP UP...!!!
GUYS PLZZ TRY THIS ON YOUR IPHONE 3GS/4/3G...AND LET ME KNOW IF THIS WORKS!!!

IMessage not working since upgrading to ios 5.1 iPhone or iPad??!!

Both myself and my partner have iPhones. I'm on a 4S she has my old 3GS. Since we both updated to 5.1 iMessage doesn't work, anyone I know who hasn't upgraded past 5.0, iMessage still works. Any ideas. Auto time update is on, on both handsets, it's strange as it was working for a few days after the update then it suddenly stopped one afternoon and hasn't worked since.

Try turning iMessage off, wait a few minutes, then turn it back on.

IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

HT3258 My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

You just need to update it to the latest version. See:
http://kb.parallels.com/114449

Home sharing on apple tv not working since upgrade to yosimite

home sharing with my Apple TV (gen 3) and iMac not working since upgrading iTunes (12.0.01.26) and installing Yosemite (10.10) on my iMac (2008).
everything worked fine before this!

Hey stephenfromdominion,
Thanks for the question. I understand that you are experiencing issues with Home Sharing after upgrading to OS X Yosemite. For troubleshooting information, check out the following resource:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks,
Matt M.

Hi, since upgrading to IOS 8.0.2 my iphone 5 no longer connects with the entertainment system in my car? Any ideas?

Hi, since upgrading to IOS 8.0.2 my iphone 5 no longer connects with the entertainment system in my car? Any ideas?

So yesterday vibration suddenly started working again, after nearly two weeks with the problem above. I have no idea why, I didn't change any settings and the only app that was updated yesterday was Facebook messenger...

IPhone Home Button not working after upgrade to ios 5.1.1

Hey everyone,
I'm pretty sure this is a software failure due to the symtoms the iPhone is showing;
0 - the home button does not work at all when the phone is turned on and running ios 5.1.1, well it used to work okay when i had ios 5.0.1, I upgraded to 5.1.0 and started working randomly, upgraded to 5.1.1 to see if it was fixed with no luck at all.
1 - When locked the screen does sometime light up, like when you press the home button and don't slide the unlock button. but it does not exit apps anytime, I mean it doesn't act like it's pressing the home button randomly but only when the phone is locked.
2- The button does work perfectly when iOS is not running: I can get in and get out of recovery and dfu mode at will, that wouldn't be possible if the button were broke.
3- what else? Oh yea, not really a symtom: Tried the 'home button calibration' several times.
4 - It's not filthy, since I really cleaned it thoroughly with a powerful tiny nozed air blower I got and gave a rubbing alcohol treatment too.
5 - when I shut the phone down it instantly turns back on, I can interrupt the turning on for turning the phone into dfu mode (i'm sure It's in DFU mode because the tinyumbrella log monitor tells me)
I'm now using the 'soft' home button that goes in the accesibility options, but hey, I didn't pay a ton of money for a phone that the same Apple is gonna break down.
It's out of warranty and I don't have apple stores where I live.
I'd downgrade to 5.0.1 in a snap if I could but I'm not into jailbreaking, so the shsh blob thingie is not a possibility.
Any apple dev around that can give me a workaround?
thanks a lot in advance
Added more info ~

I had the same problem with Home button not responding after upgrading from iOS 5.1 to iOS 5.1.1 on an iPhone4.   I solved it but not sure exactly what fixed it.   Here is what I did.
1. Took it local Apple store Genius appointment.   They used a special tool and took some lint out of the connector opening.   The Home button started working.   They said even though the phone was out of warranty, I could buy a new replacement one without a contract for $150.
2.   The Home button stopped working when I got home.   I got some compressed air in a can and blew the air through the connector to try and clean out more dust.   I now keep the phone with the connector opening facing down in my pocket.   I also struck the phone downward on my hand or other soft surface to force as much dust out as possible.
3. The Home button still was intermittent. I then tried to do a hard reset by holding the power on key and the Home button simultaneously for about 10 seconds. This doesn't work if the Home button doesn't respond.
4. I connected the iphone to Itunes via the USB to sync the phone. While connected, I did a Hard Reset by Holding the Power button and Home button simultaneously. I noticed the Home button responded better when connected to ITUNES via the USB.
5. I did a backup of the iphone4 by highlighting the iphone 4 while connected to ITunes and right mouse click and selecting BACKUP.    I was prepared to reset my phone4 in iTUNES and restore it from the backup.
The phone worked consistently before I had to do this.
6. As a last resort which I didn't need to do, I was going to copy all my settings for the iphone by selecting the phone in iTUNES and looking at all the sync settings.   I would then have restored the iphone to original factory settings and then sync the phone using the copied settings. This would have made sure that the backup didn't include the bug.
Fortunately, I didn't have to do step 5 and 6.   Things started working after Step 4. So I don't really know if it was the iOS 5.1.1 upgrade or pure coincidence that the Home button stopped working immediately after the upgrade.

Wifi & Battery Problem since upgrading to ios 8.0.2

me upgraded my iPhone 5s to iOS 8.0.2 but I have a problem about Wifi and Battery !!! my wifi disconnect every 1 minute and when i turn it Off then On it will work for 1 minute and will disconnect again and i have to turn it Off then On again ! And my battery is getting low very faster since upgrading to ios 8.0.2 while i installed just 3 Program (Line-Viber-Clash of Clans) !!! please heeeelp me

Hi there Mehrdad Nofar,
It looks like there may be a few resources for you. For the Wi-Fi issues, I would recommend taking a look at troubleshooting steps in the article below.
iOS: Troubleshooting Wi-Fi networks and connections
As far as the battery concerns, there several things you can do to isolate the cause of the issue. The page below outlines tips to maximize your battey life and isolate any background activities.
Apple - Batteries - Maximizing Performance
Hope that helps,
-Griff W.

My morphie pack does not work since upgrading

My juice pack (Morphie) Does not work since i have upgraded the ios to 7.1.1
I have two iphones a 4s that has not been updated yet and also the 5s which has been updated. The 4s is working perfectly well with the juice pack but the 5s is absoultely crap to say the least. I complained to Morphie and to their credit the sent me a new pack and it has the same problem. This MEANS since the update there has been a change with apple and they have made our 100€ chargers redundant as I only get 20 - 25% extra battery when I should be getting a full charge
This is not acceptable for phones that are expensive and the accessories that we buy to go with them are also an additional expense and very expensieve to. That doesnt matter too much when they work, but then they dont it is NOT good.
Someone come back to us and give us a solution please.
Elena - a very loyal apple client with apple imacs in the office, mac book pros and air mac for sale staff along with ipad minis and iphones......... NOT A HAPPY CLIENT

3l3na t wrote:
Thanks guys for the responses but I am not convinced this is a MOPHIE problem. Their customer service department have been great and look after their clients. I have two iphone 4s´s which have not been upgraded for fear of being left with the rubbish battery I have with my relatively new iphone 5s. Mophie have replaced the amost new juice pack that I had with a completely new one that has the same problem...... funny how this has happened since the ios 7.1.1. update
I have been using MOPHIE juice packs for a number of years and have never experienced anything like this before. It seems rather strange that after upgrading I have this problem that APPLE negates to rectify.
Of course I wouldn´t have to use a 3rd party accessory if the battery was made to last and if APPLE had an alternative, I would of course buy apple but they don´t. I am a huge fan of Apple but cannot run a business with phones that cannot be upgraded for the fear of loosing battery life which would mean loosing clients which would mean loosing my lively hood.
Full phone restore was done too.
Still not HAPPY
Sorry, as already stated your using a 3rd party accessory take it up with mophie.
I have no issue with my mophie after updating to 7.1.1 - so your theory is flawed.
My battery life can last up to a day and a 1/2 - I only bought the mophie as a backup battery and because it is bulky and can protect my phone in case I drop it.

Canon Printer mx860 not working since upgrade to Yosemite, it is connected to my Mac via usb. Any suggestions? Thanks. LL

My 2009 Canon MX860 Pixma printer not working since an upgrade to Yosemite on my MAC version 10.10. It is connected by USB. Have had no previous issues with printing, scanning or faxing. When trying to print my Calendar I only get light vertical dotted lines, none horizontal, no words and vague header colors. Checked printer image on the on my MAC which shows the same problem. All of the color and black cartridges are new.
The recent upgrade to the Canon application says it is completed but it is not, image on application upgrade is a circle with an X.
Any suggestions? Could this simply be a compatibility problem? I'd sure like to keep my Canon printer.
Thanks, LL

Can you open System Information (Applications > Utilities) and select Printers in the left sidebar. If the MX is the only printer connected to the Mac then its information will be shown in the right pane. If you have more than one printer, then a list will be shown in the top right pane. Select the MX to see its information in the bottom right pane. Can you copy this information and paste back here for me to check.
Also an FYI - this is the Mavericks forum. The Yosemite forum is here

Iphone 3G wifi not working after upgrade

Iphone 3G wifi not working after software upgrade, no proper fix from Apple. APPLE SUPPORT - R U SLEEPING.......

You are not talking to Apple. This is a user to user forum.
If you're using the iPhone 3G, there will be no fix for your problem. The software you have, 4.2.1, is the end of the line for the 3G. Apple is no longer providing software updates for the 3G.

Signature field NOT working since upgrade to Adobe Pro X

Hi Forum,
Form stop working since upgraded to Pro X (ver 10) in Adobe. Getting this message:
IntegriSign
This plug-in is intended for validating signatuers signed using earlier versions of Acrobat. To sign using this version of Acrobat use "IntegriSign to Acrobat 9.0 and later" handler
I have changed settings in Adobe Pro X to the above but still get the same message.
Do anyone know how to fix this?
Thanks,
Patricia

Download directly from Apple and install over what you have now;
iTunes 12.0.1

Why does wifi not work since loading IOS 6

I have had a iPhone 4s since it was released... I uploaded IOS 6 & my iphone 4s wifi rarely & barely works... All my other computing wifi devices work fantastic because I have 20+ mb/s download speeds... iPhone 4s downloads at 1 to 3 mb/s or not at all... Apple replaced my iphone in Oct, the wifi worked briefly then quit... Yesterday Apple replaced my iphone again, it didn't last 24 hours & the wifi quit working...
My wife's iphone 4s has quit working too after updating to IOS 6...
Can we go back to IOS 5 or is there another solution...
Been to the Genius Bar & their only solution is to give you another iphone or wait for another software update...
They recognize the issue too, but have no zero solutions...

How has it stopped working?
ARe you on wifi or cellular data?

WiFi not working since upgrading to IOS 7.1.1 on iPhone 4

Similar Messages

Maybe you are looking for