WIFI not working when WEB is running and using NMA...

hello,
If you load up a web page with the N95 8GB and then hold the menu button to switch to standby then goto Nokia Maps, the Nokia Maps can not make an Internet connection even though there is one available via the Web.
Anyone else can confirm this bug?
Does N95 8GB support shared WLAN access between apps or has Symbian screwed up here and only allow 1 application at a time (WHICH IS EXTREMELY STUPID IMHO).
If the latter is true, how dumb is that?
Have they thought of this scenario?
I want to use my Internet Phone via WLAN while I am using Nokia Maps to guide myself around town. With the current software, I can not do this.
N-95 8GB, Wish Nokia made a 3G World Phone.
Release a 3G HSPDA 850/900/1800/1900/2100 and Quad Band GSM phone instead!

The Phone, depending on the application, CAN share the WILAN connection, but sometimes some apps refuses to share it. This is why Nokia should be fixing this issue by ensuring that everyone goes to the same Network procedure and to ensure that no only application can lock that access.
N-95 8GB, Wish Nokia made a 3G World Phone.
Release a 3G HSPDA 850/900/1800/1900/2100 and Quad Band GSM phone instead!

Similar Messages

Insert statement not working when Interface is run through PI ..

Hi Every one,
There is an interface(Server proxy) which updates a ztable in the program. Updates are happening when we are running this interface manually(putting Payload manually) but in case there are already entries in ztable and we are trying to update these records, even after handling exception z table is not getting updated when run through PI and happening manually.
Please suggest me for the same.
Vivek

Tobias from this forum had the answer!
http://powershell.com/cs/forums/p/5438/8786.aspx#8786
His fix:
Whenyou putput text from powershell, the console width is assumed. Since task scheduler runs its own hidden console, the width of that console is used to truncate the text.
You can work by this issue by setting the width yourself. Try using a combination of Format-Table -auto / Format-List -auto and Out-File -width like this:
get-process | Format-Table -Auto | Out-File c:\test.txt -Width 10000
The format-cmdlet with -Auto makes sure the file uses only as much width as is truly needed. The -Width parameter sets the maximum width available.
If you must redirect the output to something else, replace Out-File with Out-String -Stream -Width 10000 and then redirect the result to whereever you want.
Note that multiline strings will still be truncated after the first line.
My code looks like this:
#Export Dataset Table to a text file
$DataSet.Tables[0] | Format-Table -Auto | Out-File $rcvrFileName -Width 10000
This worked like a charm.
Thanks!

PowerPoint add-in is not working when installed for All Users using msi installer.

Hi All,
I have created PowerPoint add-in using c#-vsto. I have created msi installer to install this add-in with following two options:
1. Just me
2. Everyone
However, add-in is not working properly (Events and custom task panes are not working).
I have created registry key as below
1. for "Everyone" : HKLM\Software\Microsoft\Office\Powerpoint\Addins\MyAdd-in
2. for Just me : HKPU\Software\Microsoft\Office\Powerpoint\Addins\MyAdd-in
But when I set InstallAllUsersVisible property to False (When add-in is installed only for current user ), then add-in works fine for current user.
Please let me know if anything is missing!!!
Thanks

Hi,
This is the forum to discuss questions and feedback for Microsoft Office, the issue is more related to develop the add-in, you'd better post your question to the MSDN forum for VSTO
http://social.msdn.microsoft.com/Forums/en-US/home?forum=vsto&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support

Wifi not working with iTunes, apps store and some, but not all Internet sites....why???

Yesterday I noticed while browsing Internet that some sites would not open and that some games I regularly play would not open. I also found that I could not open either the apps store or iTunes. Everything seemed to be working the day before and I have not recently upgraded ios (been on version 6.1.3 for a while) or changed any settings on my iPad (2). With Internet research today I found suggestion that if I switched to 3G I would be able to access these apps and,sure enough, under 3G connection everything works fine. Some other forums suggest changing wifi router settings to fix the issue ....I have not tried this as I wouldn't like to mess with my router and end up effecting other peripherals/pc's connected to it that are working fine....especially when I am not terribly IT savvy when it comes to hardware settings. But as I haven't changed anything on my ipad why would my wifi suddenly stop connecting to some apps on my iPad, but not all??? Interestingly I can access many Internet sites (forums) with wifi connection but not the apple forum! To get to anything apple related I have to switch back to 3G ....that includes checking the iOS version I am on via settings!
I also mention that I have done all the other suggested fixes found on various forums, such as rebooting iPad, renewing wifi lease, clearing cookies, closing all apps etc etc, to no avail. Seems the only suggested fix I have not tried is mucking around with my router which I am very hesitant to do given the **** I went through with my telco when my home Internet connection suddenly stopped working last year. Took me weeks of phone calls to get my internet connection back and being forced by the telco to a more expensive plan, hence very reluctant to start mucking around with that side of things, but why should I need to when it does seem to be working ok with other devices in the home?
I have started this as new discussion as, even though I am not terribly IT savvy, I cant see how this could be related to the wifi issues that many on the newer devices (iPhone 5 and iPad mini etc) are reporting as I haven't recently upgraded anything on my ipad and all was working perfectly up until yesterday.
Any other suggestions on how to get wifi working correctly again on iPad or do I really have to risk the working of every other device in my home and chase it from modem/router side?

Hi there,
You mentioned that you have tried a few troubleshooting steps already, but you may want to take a look at the article below, specifically the section titled "If you are unable to access the Internet while connected to a Wi-Fi network"
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Hope that helps,
Griff W.

[Forum FAQ] Group Policy Preferences Scheduled Tasks Item not working when the option Run whether user is logged on or not is selected

Scenario:
We use one of the following Group Policy Preferences Scheduled Tasks item to deploy a task to clients:
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
(Note that on some platforms, "At least Windows 7" is replaced with "Windows Vista and later.")
After designating a user account to run the task, we select “Run whether user is logged on or not” option, and “The Do not store password…”
check box is automatically grayed out (See Figure 1).
Figure 1
After finishing configuring the task item, on a client, we run command
gpupdate/force to forcefully update group policy. However, on the client, when we check if the task is listed in Task Scheduler snap-in, the task is not displayed, and when we run
gpresult/h report.html to collect group policy result for troubleshooting, we see an error as similar as shown in the following figure (Figure 2).
Figure 2
Cause:
To make the scheduled task run whether the user is logged on or not, we need to store the password of the designated user account. However, for the content of the scheduled
task item is stored in Sysvol where it’s not safe to store passwords, this function has been deprecated.
Workaround:
We can run the task with system account
NT Authority\System, or we can use specific user accounts to run the task when the given user is logged on. (See Figure 3)
Figure 3
Reference:
MS14-025: Vulnerability in Group Policy Preferences could allow elevation of privilege: May 13, 2014
http://support.microsoft.com/kb/2962486
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hello Everyone,
Succeeded !!!!!!!
Even i was struggling with this same Problem to execute a batch via Window scheduler and set the setting to "Run whether the user is logged in or not".
I tried many time but the batch runs with " Run
whether user is logged on" and not with "Run
whether user is logged on or not".
what i discovered is that there was one mapped drive
path in my batch file which was not the complete path like y:/AR.qvw actually what i did i changed that map path to the complete path like \\servnamename\d$\AR.qvw and the batch executed successfully with the setting "Run
whether user is logged on or not"
The
conclusion is that check the dependency of the script on external resources because when you check this option "Run
whether user is logged on or not" It actually conflicts. This my discovery.
If
you have any question write me on [email protected]
Thanks
& Regards,
Arun

Norton Confidential says that I am not protected when web browsing unless I use Firefox version 1.5. However, I actually use version 3.6.10. What's the problem?

I use Foxfire Version 3.6.10. Whenever I boot Firefox, I get the following message:
"This version of Firefox is not supported by Norton Confidential. You will not be protected while browsing the Web. Norton Confidential cannot protect you while you use this version of Firefox. Phishing protection requires Firefox 1.5 or later."
Note that my version of Norton Confidential is Version 1.2.1 (36).

See Norton support for help with that issue. <br />
http://norton.lithium.com/norton/

Flash Player does not work with Standard User, but will work when browser is "Run as Administrator"

I don't understand why this is happening, but Flash Player will not work when a Standard User is using the browser. It will only work when the browser is run as an administrator. Any way to fix this? I've tried to uninstall, and reinstall the player, and it still wouldn't work.
The user is on Windows 7, 64-bit. Using IE 10.
Flash not working for Standard User - YouTube

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

Kowhai wrote:
Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

My i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting general

my i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting >general<reset<reset network setting. but all in vain. tell me the solution

restore your phone as new through itunes. if the issue persists after a factory restore via itunes, it means you've got a hardware issue and the phone needs to be repaired

My program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but it does not add any ebook either. I uninstalled the program and reinstalled again but nothi

my program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but it does not add any ebook either.
I uninstalled the program and reinstalled again but nothing gone better-
What should I do?
Best regards

Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up

Windows 8.1 wifi not working after sleep (and other various bugs)

Hello Apple support forum, this is my first post!
Alright, so I just switched to my first mac. MBP Retina late '13. I bought it primarily to run windows, and to also of course use OS10.
My issues in bootcamp however are getting annoying. My Wifi shows up as connected after I resume from sleep, but my mac won't let me disable wifi, enable airplane mode and then re-enable wifi, nothing. The only way to get wifi to work when resuming from sleep is to reboot.
I just set hibernate when close lid on all my power modes, and basically disabled sleep for now. Hibernate works fine for now, but sleep is much faster from resume and also I'm not sure if the machine will wake up from a simple tap on the keyboard or opening of the lid, I think I have to actually boot it all over again anyways.
My other minor but still annoying issue is my titles of windows in windows are showing up as black (screenshot here)
the only other thing I was curious about was the dual-gpu functionality. I know from reading these forums it's probably not possible because of the hardware and software mesh apple created for OSX and their dual-gpu design, how it wouldn't really work in windows. I'm just wondering if anyone ever got this to work in windows maybe on the older retina MBP or older macs, or if anyone is making progress on trying to fix that in windows? I bought this laptop expecting that to work, even the geniuses at the Apple store said it would be possible, I was misled and might have second-gussed buying a 3k machine if it would only get a few more hours battery than my old Vaio. I bought this machine primarily for battery life.
I'm just remembering another tiny tiny issue. When I plug headphones in the headphone jack in windows, it doesn't automatically switch to that audio output, I have to manually do it in audio settings, is this a bug, have I configured something incorrectly, and is there a fix?
One other thing is my dpi settings, I have it set to a larger font and everything because at stock it is SOOO tiny. my question is, is there any way to smooth out text in other apps, my browser and apps like rdio look like crap unless I leave the dpi settings stock, which I basically need a magnifying glass to use (I tried that for a week lol. Not the magnifying glass tho haha)
I know I'm rambling at this point, but in the windows 8.1 camera app, sometimes my camera does this bug where it flips between inverted and normal, extremely quickly, so it looks like there are two of me. I don't know if this was GPU drivers tho, because just reinstalled those this morning and it seems to be ok so far.
also, the keyboard. I miss my context menu key, what do I need two command keys for? A right alt button, I'd rather have that be the other control button. Any way to remap these easily? what about switching Fn with control on the left, I prefer my windows button in the exact corner.
last question tho, I saw people overclocking gpu's on their retinas from last year, can you do this on the new retinas, and can you overclock the cpu as well as the gpu?
I do have to say this in the end, I am a little dissapointed with apple, I was told thst my mac would run windows like a native windows machine. I know windows 8.1 is not supported, but coming from PC's for years, and being a PC technician, I also go to school for computer engineering, I expected everything to "just work" as steve jobs once said. Well, it doesn't just work. I even had these issues in windows 8, which is supported.
Installing windows 8 was a nightmare. I had to use the forums, try for weeks to get windows 8 to finally instll the proper (uefi) way, and to get everything usable, I had to reinstall my os's twice.
Apple, if you are going to advertise a mac that can run windows "seamlessly", you need to get these major issues fixed, support all new versions of windows before they are even release, and release proper hardware drivers and support software before new hardware is released. All other Windows OEMS are pretty much required to do this to stay in business. I don't dislike OSX, I just use windows for everything I can't use Mac for, so please fix this. You're better than this, you should put a higher standard on this. otherwise, don't advertise macs that can run windows.
Thanks guys, sorry for the information overload. BTW, MBP Retina 15" 16GB RAM 512 SSD, 2.6 haswell, pretty much the max specs other than the SSD.

I have stated every issue I’ve had so far in a fairly clear and concise way. I think if you read what I wrote, it all makes logical sense as to what is going on. Windows 7/8 would work just as well on a Mac if it was supported the same way the OS is for other OEMs.
As I stated earlier in the post, I’m having these same issues in windows 8, not just 8.1, which is the reason for the post. I know the difference between supported by drivers and not supported by the manufacturer. The fact that when Haswell mbp’s came out and no revision to bootcamp for the new hardware was released to fix issues with installing windows on the new hardware shows Apple clearly Is not supporting bootcamp as strongly as they advertise.
I am being realistic on Apple having drivers early. Anyone with an MSDN subscription can download the RELEASE version of windows months ahead of the actual release, I’m 100% sure if any average consumer can do that by paying $100 and saying they are a developer, apple can do it just as easily.
You aren’t much help, you haven’t answered really anything to my post, nor have you contributed any knowledge that wasn’t clearly posted above, so don’t say anything if you don’t have anything to contribute.
By the way, my rant is directed at apple, as you can see because I am saying “Apple, if you are going to…” because this is an Apple forum on Apple’s website. It is not directed to end users, clearly.

Flash catalyst cs5.5 not working when i run the project

when i ran prodjects in flash catalyst cs5 it came up as a webpage that could scroll, now in cs5.5 when i run the prodject it cannot scroll and it doesn't scroll when you export for web servers, help much apreciated.

Vijetha wrote:
Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.
hello vijetha,
window and canvas show scroll bar when it need.
You should show block property
and set block scroll bar
hope this helps..
Hamid

Iphone 4 the mike does not work when making a call. it does work with speaker phone and face time

Just activated new Iphone 4 and the mike does not work when making a call. it does work with speaker phone and face time. Any known fixes?

My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired and i also reset network setting but nothing gonna be worked

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

WIFI not working when WEB is running and using NMA...

Similar Messages

Maybe you are looking for