Wifi not working with bootcamp windows 7 install

I have installed window 7 enterprise via bootcamp however I can't get my wifi configured. Windows does not see the built in wifi. So I cant get to the outside world nor configure a wifi printer in window. Everything still works perfectly in OS 10.6.6. Any advise on how get to get the wifi working in windows would be great.

It is not a driver problem, but a problem in the BIOS emulated by bootcamp on some (not all) MBP models. So unless Apple fixes it in bootcamp, there is no real solution. And obviously, Apple doesn't care. They are dropping the Expresscard slot anyway.
Unfortunately, this poster seems right: http://forums.macrumors.com/showthread.php?t=912259 :
The 2008/2009 Macbook Pros don't allow to use the ExpressCard slot because of EFI/Bootcamp errors (Windows Vista/7 cannot allocate an IRQ to the slot). You don't need any drivers for using an ExpressCard slot on Windows, you only need the drivers for the corresponding card you are using.
Bootcamped XP allowed to use the slot, but you could not use hot-plugging.
And from the Sonnet site ( http://www.sonnettech.com/product/tempo_sata_express34.html ) :
Tempo SATA ExpressCard/34 not supported under Windows 7 or Windows Vista when running on unibody MacBook Pro computers. The problem is caused by the MacBook Pro's BIOS emulation, which doesn't allocate enough resources to support certain kinds of Expresscard/34 devices, such as a SATA controller, in these operating systems.
(added link to Sonnet's explanation)

Similar Messages

Zen Micro Photo not working with new XP SP2 install

Okay so my Zen Micro Photo stopped being recognised on my computer about ten months ago when I upgraded to WMP (for BBC iPlayer - it's compulsory to have it). Anyway I li'ved with this and have now got thoroughly sick of the same songs and nothing new so I have done a fresh install (on a brand new hard dri've) of Windows XP SP2 WMP9 with the sole intention of using this install/hard dri've?for the player. I used the original installation disk and it prompted me to upgrade to WMP0 as I installed everything. There were no errors during the install and I rebooted when prompted to.
When I attach the player it is recognised by the machine (task bar icon and correctly labelled in System > Hardware > Device Manager which reports it to be?working okay) but the Creative media software says "player not attached" when it is. It is not visible on My Computer as a dri've so I STILL have no access to the player. Player screen reports "docked" with a logo and is flashes a charging icon. Driver v5.2.0.0. The player plays fine but hasn't had new music on in almost a year
There is nothing else on the XP install (IE6 and everything - argh!) I did the registry permission tweak thing mentioned?here:?http://support.creative.com/kb/showa....aspx?sid=9287?but it didn't do anything.
Any help greatfully received!

Re: Zen Micro Photo not working with new XP SP2 install. Have you installed this plug-in?
Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer
Filesize : 27.9 MBDownload

HD Audio is not working in bootcamp windows in mac mini 2012

HD Audio is not working in bootcamp windows in mac mini 2012

Update to the latest bios: https://forum-en.msi.com/index.php?topic=163918.msg1260356#msg1260356 (Follow the guide)
>>Clear CMOS<<
Afterwards update the Intel Management Engine Driver in Windows.
Reboot and afterwards install current Realtek drivers: http://www.msi.com/service/download/driver-22481.html

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

ExpressCard/34 not working in BootCamp Windows 7 64-bit. Apple's BIOS emulation does not give enough resources.

MacBook Pro unibody, 15" 2009
ExpressCard/34 (Card is by Transcend TS-RDF1, JMicron chip for SD card) is not working in BootCamp Windows 7 64-bit. Windows reports:
"This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system."
Other data points: Card works fine in Mac OSX, worked under Windows XP 32-bit (initially reported same problem, but works after reboot).
Checking the forums there seems to be no actual device suggested to actually remove that would help the problem. And even if it was, the concept is ridiculous. What other device would you like to remove? Display adapter? Network adapter? No way. I use all available devices and don't want to compromise.
It seems like BIOS emulation does not allocate enough resources to ExpressCard.
Are others having the same problem?
Does anyone have a fix for this?
Is there anyone at Apple who cares to provide a solution?

It is not a driver problem, but a problem in the BIOS emulated by bootcamp on some (not all) MBP models. So unless Apple fixes it in bootcamp, there is no real solution. And obviously, Apple doesn't care. They are dropping the Expresscard slot anyway.
Unfortunately, this poster seems right: http://forums.macrumors.com/showthread.php?t=912259 :
The 2008/2009 Macbook Pros don't allow to use the ExpressCard slot because of EFI/Bootcamp errors (Windows Vista/7 cannot allocate an IRQ to the slot). You don't need any drivers for using an ExpressCard slot on Windows, you only need the drivers for the corresponding card you are using.
Bootcamped XP allowed to use the slot, but you could not use hot-plugging.
And from the Sonnet site ( http://www.sonnettech.com/product/tempo_sata_express34.html ) :
Tempo SATA ExpressCard/34 not supported under Windows 7 or Windows Vista when running on unibody MacBook Pro computers. The problem is caused by the MacBook Pro's BIOS emulation, which doesn't allocate enough resources to support certain kinds of Expresscard/34 devices, such as a SATA controller, in these operating systems.
(added link to Sonnet's explanation)

Why i-tunes not working with the windows 8.1?

i have windows 8.1 in my laptop,but i-tunes not working with it.when i connect my iphone with my laptop its not shown in itunes.
can you please help me?

See this support document. http://support.apple.com/kb/TS1538
The latest version of iTunes works just fine with Windows 8.1.

Windows key + left and right arrows not working with RemoteApp windows

My office is deploying RemoteApps to replace certain locally installed applications. I, and many of my coworkers, have 2-3 monitors and the Windows
+ left and right "snap" function has been an extremely convenient way to juggle multiple windows across multiple monitors. Unfortunately, it doesn't seem to work with RemoteApp windows. Does anyone know a way to get this working?

Hi,
Based on my test, I agree with Keith Langmead, it seems Windows key + left or right key cannot work with remoteapp.
Alex Zhao
TechNet Community Support

WLC 2106_AP-1131_dell vostro 14 v3446 wifi not working with WLC

Hi,
I'm facing issue with newly purchased Dell laptops(dell vostro 14 v3446) are not able to join in WLC.
I have check WLAN profile for these laptops ,all mapped correct,but laptops not able to join the same profile.
Only one(newly purchased) laptop is working fine with WLC profile,remaining laptop all config is same but not getting connected with WLC.
Laptop wifi is working with another vendor APs.
But this particular profile working with my exciting user's laptop perfectly.
WLC/-AIR-WLC2106-K9-Firmware version—6.0.199.4
AP-AIR-LAP1131AG-A-K9.
Please advice me here to resolve this problem.
regards,vijesh
This was posted in lieu of blog https://supportforums.cisco.com/node/12292096 which was deleted since questions should be questions as discussions as not as blogs ;-)

Hi Leo,
Thanks for your response.
Client laptop trying to connect the SSID and once authentication key entered ,it will try for a while then error message come "could not connect...."
As our suggested,i will create new profile with open authentication,then try to connect the laptop.
we have planned to upgrade WLC firmware in coming weekend.

Wifi not working with Windows Vista - BT in denial

I run a laptop repair centre in Dundee and have BT Business Broadband which was working fine until a few days ago.
Now, any vista machine refuses to connect to the wifi while XP and Windows 7 are unaffected.
I have hundreds of laptops in stock at any one time and this issue is affecting them every single machine installed with Vista. These same machines work fine when connected to another wifi service (virgin media).
I phoned to report this fault and have been told that it's not BTs problem and I'd have to pay to have someone come and look at it. I was put through to a supervisor who told me that it "was Bill Gate's fault"!!!!!
I've worked with Vista for the 7 or so years it's been out and know the operating system inside out.
This is NOT a fault with the machines, or Vista, this is definitely a router fault but the supervisor refuses to believe this.
I'm now trying to cancel my contract as I'm not receiving a full service.
This is absolutely unbelievable that such a major company can just brush me aside and deny there's any fault. They won't even entertain the idea of sending me another router to try!
Has anyone else had this problem?

After phoning the same number, this time I got someone very helpful who knew their job well.
Apparently there is a known issue affecting certain routers at the moment. This problem causes connection issues with Vista machines on wifi and the fix is to reduce the encryption from WPA to WEP.
This works perfectly.
The person then explained that they were expecting a firmware update to be released soon for the routers which should cure the problem properly.
Why in **bleep** did the person this morning not know that, and even worse, why didn't his supervisor that I demanded to talk to not know that either. He point blank refused to even consider the notion that the fault lay with BT!
Some staff need retrained not only on the technical aspect of their job but how to deal with customers as well....
Thanks for the help folks

Adobe flash does not work on bootcamp windows 2002 xp. down loaded to windows. works with Mac. No program folder for such. shows up in "add delete programs" (in setting) but without a file size. I have a MacBook Pro purchased new in June 2010.

Using bootcamp (windows 2002 xp) I down loaded adobe flash player from the windows platform. told me it installed successfully. however does not work in windows, does works in mac. in xp there is no created program folder for such or created short cut. In the control panel (xp) in add/delete programs it is listed but wihout any file size or frequency used. I've deleted & reinstalled numerous times. Mac OS is 10.6.8. Windows is 32 bit. Can't find a thing that discusses this. THANKS!

I just now posted it Adobe Flash Player 17.0 - Bug 3973913
Adobe Flash Player 17.0 - Bug 3973913
Adobe Flash Player 17.0 - Bug 3973913
Adobe Flash Player 17.0 - Bug 3973913

HT3986 DVD is not working with bootcamp in windows 7

Is there a link for DVD driver to work with windows 7 (using bootcamp)? Thanks.

it has to be plugged into the machine before you power on the machine, it is not hot swapable like on OSX
does the screen work in OSX

HP P1006 laserjet not working with a windows 7 Dell e5510 laptop

Hello
Any help is appreciated. When I plug into the usb I get an error message so therefore I can not continue with the installation of the drivers. aaaaaaahhhhhhhhhhhhhhhhhhh!!! This is frustrating.
thanks for any advice and suggestions

Hi Donaldparis,
After researching from the HP website, I realize that they do not release the HP LaserJet 3050 All-in-One Printer driver for Windows 7. It means that you will install the Windows 7 built-in basic driver and use the basic features. For more information about how to install the basic driver, you may refer to the following link:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=3463669&prodTypeId=18972&objectID=c01856597#category4
Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If it does not work, you may also try to install the printer driver for Windows Vista under compatibility mode.
Install driver under compatibility mode & Administrator level
==================================
1.Right click on the exe file for driver and click Properties.
2.Click on the Compatibility tab.
3.Select “Run this program in compatibility mode for.”
4.Choose Windows Vista (Service Pack 2) from the drop down list.
5.Select “Run this program as an administrator” option under the Privilege Level topic.
6.Click Apply, click OK.
7. Please double click on the exe file again.
Good luck!
Arthur Li - MSFT

Cortana not working with new Windows 10 on Yofga 2 13

I recently updated to the new Windows 10 but am unable to get Cortana to work, even though all my setting are set to English (UK) (required if Cortana is to work). A search online has shown that the only other people I have found with the same issue also own a Yoga 2 13. Just wondering if anyone else with a Yoga 2 13 has had the same problem and if there is any way of overcoming this?

I have the same problem on my Z510. I have installed the very latest audio drivers but still not working. Like you, I have made sure that my region and language settings are all UK and have installed the UK English pack. I am beginning to think this is a Lenovo problem as, otherwise the WEb would be full of this.

Adobe Active X will not work with my Windows 7. Suggestions?

My Adobe Reader 9.xxx was replaced with Active X, which will not work for me. I keep getting a box message that says perhaps the Adobe.com site is too busy at the tine. I would rather have my Adobe reader 9.xxxxx back as it worked very well for me. I have it on my other computer and it work fine. I am using Windows 7. Any suggestions?

Mike Garin wrote:
After making changes to Internet Explorer, per Adobe's instructions, Adobe Reader is now working. Thank you for your patience and your help.
Regards,
Mike Garin
From what I understand from this message, it would seem that your Reader passed from "not working" to "now working", whatever you may mean by these two expressions. I am glad.
May I suggest that next time you have a question, please try to state it clearly and also give enough and accurate details about your problem?
It would also be useful if you coud mark this question as Answered.

WAD 3.x not working with OS Windows 7

Dear Experts,
We are using BI 7.0 with ABAP Services. Hence using BEx WAD 3.x version for Templates instead of WAD 7.x.
On my PC, OS is Windows 7. While opening WAD 3.x it is giving message that "This application requires Internet Explorer 5 or higher. Inform your system administrator." Earlier it was Windows XP SP2 and WAD 3.x was working fine.
Also I have IE 8.0 on my PC. Please suggest the solution on the same.
Regards.
Deeps

Hi,
Please check the OSS Note below:
WAD 3.X is not supported in MS Windows 7
SAP Note Number: 1391689
-Vikram

Wifi not working with bootcamp windows 7 install

Similar Messages

Maybe you are looking for