Wifi only / 3g same frame???

I've just finished replacing a screen for a wifi only ipad . The kit was complete with frame, I was thinking of keeping the frame incase I get asked for another screen replacement and I can buy the glass only.
BUT
Is the frame the same for both 3g & wifi,  wirh only the glass thats different, or are the frames different?
Thanks

this may be caused by the network and it may not be strong see if somewhere else will work other wise its the network or the iphone

Similar Messages

  • IPad wifi only vs iPad 3G, same wifi chip or not?

    Does anyone know if the wifi chip in the wifi only ipad and ipad 3g are the same? Sometimes all the radios are on one chip which might indicate a totally different chipset for the two ipads. I am having trouble with slow internet speeds on my wifi only ipad. My iPhone 4 and Core i5 iMac are on the same network and are just fine. I've tried disconnecting and reconnecting from network, forgetting network and rebuilding, ipad hard reset, airport reset....nothing seems to help. I thought maybe I could swap my wifi only model for a 3g if the wifi chip was different.

    HI,
    I've tried disconnecting and reconnecting from network, forgetting network and rebuilding, ipad hard reset, airport reset....nothing seems to help
    Try ... Tap Settings / General / Reset / Reset Network Settings
    I thought maybe I could swap my wifi only model for a 3g if the wifi chip was different.
    If Resetting Network Settings doesn't make a difference, take your iPad in for service.
    Carolyn

  • Why is my internet speed slower on my 4g iPod touch compared to my 1g iPad (Wifi only), though we use the same router?

    i bought my 4g iPod touch just 3 months ago fromt the US. Internet speed was just fine and working consistently while i was using a d-link router.
    my Wi-Fi network is password protected and since has not affected the speeds on my pc or my iPad (wifi only). However, just 4 weeks ago, i bought a new router, an Aztec one. That has not improved or worsened the speeds on my pc or iPad, but worsens only my iPod touch, even though it says its connected and has a full signal strength.
    Here are the symptoms:-
    1. iMessage is now really slow as after i click send, the loading bar at the top lags.
    2. i can't go on to google or any site or app that involves internet connection e.g. Facebook, Twitter
    3. I can't purchase or get apps from the App store as the searching takes way too long.
    4. Now as i pull down the notifications bar, it shows temperature but no stock; i can't even access the Stocks app
    5. I can see the temperature for the day on the notifications, but i cant see the details for the rest of the week like i was able to
    6. I now cant read any updated emails on Mail as it takes way too long
    I live in a country called Brunei, and speeds are the worst there, yet they shouldn't be this slow especialy when my friends and other devices are working.
    So, what's wrong? Is it my new router?

    Have you tried a simple reset of your iPod to see if that helps?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    Otherwise, have you tried any of the troubleshooting mentioned in this Apple support document?
    iOS: Troubleshooting Wi-Fi networks and connections
    B-rock

  • IOS5.0.1 constant error "iPhone can not make or receive calls.  Restore from iTunes":  I get this message and the phone will no longer work (happend once while on airplain mode and now once while in wifi only area, out of cell range).  help!

    All- I get this message ("iPhone can not make or receive calls. Restore from iTunes" (happend once while on airplain mode and now once while in wifi only area, out of cell range)). iPhone 4.  Newest OS.  Never happened with old OS! Cycling phone on/off does not help.  Ignoring message causes phone to cycle off then on.  After first time this happened, I restored.  Six days later...same problem!  Clearly a new fix is necessary.  Suggestions? 

    I have not tried that...I will look up the process so that I can do it correctly (and still transfer all of my files, contacts, etc).  Any suggestions?  What is the advantage of restoring as a new device..is this more akin to a complete wipe of a hard drive?

  • Two separate videos in the same frame, and large format video.

    Hello. 
    I'm very new to this program.
    I've only done basic editing, such as this video where I took scenes from 3 different computer game replays and spliced them together.
    I own an eyefinity system (triple monitor) and record replays from games.
    The replays are half-size, but still 3008x600 pixels. Here's a sample of one reduced to fit in a 1920 pixel width.
    I want to get two of these in to one 16:10 or 16:9 frame.
    So two questions:
    1. Each time I try importing these avi's in to my Premier Project, they get cropped. The largest i've been able to make the sequence is 1280x1080. (sequence preset "DVCPROHD")
    I assume i'm missing something obvious...or there's a limitation of how many pixels wide Premier can deal with. If it's a width issue...I can resize the avi's first. Although I haven't seen a way to resize in Media Encoder without the upper and lower black bars...which I believe will create a problem. (see "Here's a sample" video above)
    2. I want to put two of these long rectangular replays in the same frame. Not overlapping, but one at the top of the frame...and the other at the bottom. Is this possible?
    The only thing I could find that came close was "multi-camera monitor". I was unable to figure that out. Is that what I have to learn about...in order to do this?
    Thanks very much.

    How do I choose the right sequence settings?
    Picture-in-picture (PIP) and split screen
    Multi-camera sequences are for real time switching between different sources.
    Multi‑camera sequences

  • Adobe Media Encoder for Premiere Pro CS4 stops working on the same frame every time...

    I currently have Adobe Premiere Pro CS4 and have never had these issues exporting before. My timeline is less than 3 minutes long, but it does deal with multiple big files. It rendered perfectly and it plays perfectly in the timeline. When I try to export it using Media Encoder, however, it freezes at the same frame every time (which is actually only a few seconds in!) and then crashes, so that I have to force quit. I have tried exporting it as many different codecs and the problem persists... same frame. I tried creating a new project entirely and whipping together a few titles and exporting that to see if it just won't export anything at all. The new project exported just fine, however, which I suppose is good news. But yeah, my work on that other project is very important to me and I reallllly want to export it. Please help!

    Hi Jim! Thank you for your reply. I think you are right -- and that it lies in the audio somehow!
    It turns out that if I choose to only export the video, and uncheck audio, it will export very well and smoothly. That's great news for me!
    However, now I am trying to work out how to get the audio exported without issues. I actually had the idea of just playing the audio in the timeline and recording it via Stereo Mix, but my Windows 7 driver has Stereo Mix disabled, so it's back to square one. Any ideas of what I can do about the corrupted audio not exporting, which works fine when played in the timeline?

  • Since Apple already has a SMS/MMS app for the iPhone, which can be used over WiFi, can the same app be installed on the iPad 2?

    I have an iPhone 3GS, and realized I do most of my SMS/MMS messaging at home, when connected to my WiFi. Then I began to think, if I'm using the messaging app over WiFi, can the SAME app (which, personally I like much better than the third party apps) be installed on the iPad 2 (which I'm still waiting from back order)?

    Incorrect.
    SMS/MMS is exchanged over the same network as calls.
    "Dumb" phones or phones not in the smart category that don't have internet access in any shape, form, or fashion can exchange SMS/MMS.
    Since SMS/MMS (a poor man's email with cell phones since it is very limited) is a cash cow for carriers and very profitable, why wouldn't cell phone carriers be interested in including SMS/MMS as an additional option (and of course at an additional expense) with a data plan only for the iPad? They certainly are interested in it but they can't since SMS/MMS is exchanged over the same network as calls.
    Get me the IPAD SMS app
    Take your whining someplace else. The self-entitlement displayed here by some is laughable.

  • Does iMessage works on an iPad WiFi only(no 3G)?

    I´m trying to activate iMessage on an iPad Wifi only(no 3G), but it fails saying there´s a problem with my network connection, the same network i use my iPhone 4 where iMessage seems to be activated.

    I´ll have to find out what´s wrong, because Safari does work. I must say its a Ad Hoc connection with my PC at work, where the network uses proxy. But navigation on Safari works fine on the iPad. I´m going into Setting - Messages - and there it asks me to put password and start the session. After sometime it says the session couldn´t be started.

  • Urgent: Gif animation shows only the last frame when reloaded

    I use ImageIcon to show gif animations on screen. I want to use only non-looping gif animation files.
    Always when I show a gif animation for the first time it runs correctly through all the frames.
    However when reloading later the same gif animation only the last frame appears. I want to see all the frames of the animation, not only the last frame.
    So for the first showing of the animation this works well:
         icon = new ImageIcon("first_animation.gif");
           label = new JLabel();
           label.setIcon(icon);Then I show another animation and also it works well:
           icon2 = new ImageIcon("second_animation.gif");
           label.setIcon(icon2);Now I would like to show the first animation again but only the last frame of that first animation appears on screen:
    label.setIcon(icon);And even this alternative way to refresh does not work:
           icon = new ImageIcon("first_animation.gif");
           label.setIcon(icon);
    How can I reload the first animation again so that it shows all the frames not only the last frame???
    I have tried for ex. commands updateUI(); and setImageObserver but they don't seem to help.
    I am only a novice so...
    Please I would really appreciate your detailed advice what lines I should rewrite in my code and how?
    Thank you very much!!

    By flagging your question "urgent", you are implying that either your question is more important than other people's questions, or your time is more valuable than mine (or someone else's answering questions here). Both are not true.

  • I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?

    I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?
    ronald1094

    Try #5.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Location services not working after iOS 6 update (WiFi only)

    After updating my iPad (3 & WiFi only) to iOS 6 the location services no longer work. This stops some apps from working. It was fine before the update. Does anyone have a fix for this yet? I know others have been having the same problem.

    Before IOS 4 iPad and iPhone used Google and Skyhook databases for position info. In April Apple switched to using it's own in house database for location services. In the past one could register the MAC address and position of a router or access point with Skyhook and within 2 to 3 weeks any device with location services could find itself. Now with Apple handling it's own position database and no way to register an access point or router it is hit or miss as to whether an iPad or iPhone can find itself using WIFI only. If you live in a rural area you are less likely to have location services work. Hopefully Apple will emulate Skyhook in future by allowing users to register their access points or router's location in their data base. Until then those of us in rural areas are out of luck. Cheers

  • Can Touch Events and Swipe Events exist in the same frame and/or movie?

    After having fully tested a file with touch events I decided to add both a touch event and swipe event to a frame.
    I started by importing the following statements:
    Multitouch.inputMode = MultitouchInputMode.TOUCH_POINT;
    Multitouch.inputMode = MultitouchInputMode.GESTURE;
    I then added th appropriate code but only touch events worked. I fiddled so more and only the gesture events worked. So before I move any further, I'm wondering if I'm wasting my time trying to get them to work together.
    So my questions are:
    Can Touch Events and Swipe Events exist together in the same frame?
    Can Touch Events and Swipe Events exist scene?
    A reference to more information about this would be helpful, if you know of any.

    I am aware of the latest releases of the components along with the plug-ins.
    This note is applicable to your scenario but you might face some issues related to organization rule wizard, custom user group creation and EAM DB log collection, as mentioned at the bottom of the note. No matter on what SP level you are with GRCFND_A at 10.1, you would face these issues.
    And so far, i don't think there is any more update from SAP on co-existence of plugins of 5.3 and 10.1
    Ameet

  • After launching Thunderbird I only see the frames of TB without any text or buttons.

    After launching Thunderbird I only see the frames of TB without any text or buttons. No folders, no messages, no menu's...nothing is displayed. I removed the program and profiles, but a re-install results the same error.

    Hey hey Christ1
    I think we are getting closer to this thing being solved...
    The Update --
    I have all my Mail in One of my accounts (work)....but not all the Mail in the other account (aka my Music account).....
    Both I've set up again..using your advice...and changed both now to IMAP..
    Originally after refreshing my laptop, when I set up Thunderbird....I used the POP settings.....and that's when I messed it up.....
    but using IMAP now....I've gotten more of my old emails .....in my INBOX.....not all.....but most....YIPPIE
    My SENT emails....in my Music account.....have all disappeared.......I've looked in both sent folders...in POP...and IMAP....and nothing is there...
    However my sent folder of my work account...I have SOME of the sent emails...
    Address books....Collected and Personal folders.....I have NO Email Addresses at all.
    Sooo now even though I am getting confident we will solve it.....I still have 4 accounts....aka...2 Work (POP and IMAP).....2 Music (POP and IMAP) until you tell me to delete or change one from each.....
    BOTH IMAP accounts.....do not show new messages...when they come in....however the POP shows it.....I did read that If I deleted the POP to change to IMAP I will not be able to get emails.....sooo not sure what to do about that issue now....
    Is there an "automatic" backup feature for Thunderbird...?? All this could have been soo prevented if I did that....sheesh...
    anyway..thanks so far.... :)
    Jay

  • HT201210 please help me, my ipad is troble, i had ipad2 32 giga gsm wifi, but after restored ios, it became change to ipad2 32 giga wifi only..why???? please help me

    my ipad change after restore iosby itunes, from ipad2 gsm wifi, it change became ipad 2 wifi only, and its stuck in activation , pleasehelp meee, what should i do? i already try to restore again, but still same stuck .....

    Did you reactivate your cellular data connection on ipad? The closest info I found on internet is this article http://support.apple.com/kb/ts2818. tell me what happens.

  • My Ipad keeps dropping its wifi connection. This is a wifi only unit... Please help!

    I have a 32 gig wifi only ipad that is 3 months 1 week old...rinning ios 5.0.1... It keeps dropping the wifi signal... even when I am 3 feet from hub... Please help... John

    IPad dropping WiFi every few seconds after updating iOs to version 5.x
    I have the same problem with my iPad 2. It was working fine when my iOS was v.4.3.3. After updating the iOs to version 5.0.1, I kept dropping my WiFi & Internet signal. I am using WPA2, and my SSID is OFF (does not broadcast). 
    To solve the problem, I updated iOs to v5.1. Same problem occurred. I tried using the OpenDNS as suggested.. Did not work too. WiFi stays on for 5-10 seconds before saying signal was lost. Tried to log on again - iPad replied that I cannot join the network. Tried soft & hard reset, forgetting network settings, resetting all network Setting, etc - still nothing works.
    Finally, out of frustration, I turned ON my router's SSID (broadcasting openly). Guess what? My iPad WiFi is working perfectly without any dropped connection. 
    Please try this quick solution. It may just fix your problems. I realized that this solution may be effective for some iPad users out there.  But there is a chance it may not work with others (I tried almost all suggestions in other forums - ranging from updating the wireless router firmware, using an OpenDNS, doing a soft & hard reset of the iPad, etc. Still, nothing worked for my iPad - except this simple SSID setting). Hopefully, this additional solution might help someone. Good luck :-)

Maybe you are looking for