Wifi options - is there much difference?

I currently have a "g" wireless setup in my home, perhaps someday I'll get the "n" version. I'm trying to configure a T400 and there are four options that allow for "g" and "n" data rates:
ThinkPad WiFi (BGN)   
Intel WiFi Link 5100 (AGN) with My WiFi Technology
Intel WiFi Link 5300 (AGN) with My WiFi Technology  
Intel WiMAX/WiFi Link 5350 (AGN) with My WiFi Technology
Is there any special reason why the Intel WiFi Link versions will give me anything special with my plain-jane wireless router or the ones I'm likely to encounter at airports or hotels?
Also, if I want to play with NetStumbler or similar software, is one wifi option better than the others?
Thanks! 

While I am not sure what the ThinkPad WiFi is (maybe an Atheros based chipset?), the three different Intels offered are actually different despite the similar names.
The 5100 uses a two antenna design and can offered up to a 300mbps raw bandwidth.
The 5300, on the other hand, uses three antenna, and thus can offer up to a 450mbps raw bandwidth.
The last one is simply the addition of WiMAX onto the card.
If you are simply looking for a card that connects well with your router and/airports/wireless APs, then I recommend that you get the Intel WiFi Link 5300 - in my experience, it has very good range and can detect wireless networks fairly well at weak signals. (Most airports / access points only use Wireless B/G)
I wouldn't expect anything "special" with the card when used with your router though, since the card will just default back to 802.11g mode. You might get better range when using this card, however...
Lastly, NetStumbler does not work when you are running Windows Vista Intel drivers - not sure about other chipsets, but if you are running Vista with Intel cards install - NetStumbler won't play very well with it... While you can try running XP drivers under Vista - things tend to crash if you try that.
As for "similar software", it depends on what you are trying to run...
I hope I answered some of your questions.

Similar Messages

  • Is There Much Difference?!

    Is there much difference between the N81 8GB and the N95 8GB?? Any Pros or Cons?!
    AubHill

    So sum it up:
    Designwise: N95s have dual slides, N81 has only one sided slide.
    Look: N95s look more gorgeous, N95 8GB has strong build quality, N82 has it too but has cheap plastic feels.
    Screen: both N95 and N95 8GB has reasonable size screen to enjoy more than N81s.
    Music: N81 8GB has better music quality than N95 8GB.
    Video: watching video is a pleasure on N95s.
    GPS: N81 8GB lacks internal GPS module.
    Battery: Both are more or less almost the same
    RAM and Hardware: almost identical though N81 lacks 3D GFX accelerator.
    If it was possible to edit a post forever I would do so time to time if I have missed something. If anyone finds more let us know.
    But overally N95 8GB wins.

  • Is there much difference btwn dual 1.8ghz and dual 2.0ghz

    Hi,
    I have seen a dual 1.8ghz (M9454LL/A) second hand with this spec:
    Machine Type: Power Mac G5
    Machine Model: PowerMac 7,3
    CPU Type: PowerPC G5 (2.2)
    Number of CPUs: 2
    CPU Speed 1.8GHz
    L2 cache (per CPU): 512KB
    Memory: 1.25 GB
    Bus speed: 900MHz
    Graphics Card: GeForce FX 5200
    ATA Bus (DVD): Pioneer DVD-RW DVR-117D
    Serial-ATA (hard-drive): Maxtor 80GB
    for a good price around £800 which would leave me with money to buy a monitor.
    This model already has airport built in and additional ram added.
    I am a music producer (running digidesign protools LE) and need a studio computer to see me through the next couple of years. I have been looking at getting a dual 2.0ghz machine but these are invariably more expensive and I would have to pay to add the features this model already has, as well as purchasing a flatscreen.
    Basically I want to know how much of a performance difference i will see between a dual 1.8ghz machine and a dual 2.0ghz machine.
    cheers guys

    Ok that dual 1.8 is not much difference from a dual 2
    Your dual 1.8 has a 900 Mhz front-side bus per processor
    The dual 2 has 400 more Mhz total in CPU speed (not much really) and a 1000 Mhz frontside bus per processor.
    So the difference is minimal.
    You could upgrade that video card to a AGP ATI X800 and 3D game all the latest ones with no problem. (I would before they are all gone)
    If you get yourself another internal hard drive, something large like a 250-300GB SATA and keep your user files in there instead of on the 80GB Maxtor, your performance "feel" would be pretty good as well. (no Western Digital, they upgraded their SATA specs)
    And you got a Superdrive, so you can burn dvds.
    If time doesn't equal money, and your not constantly pushing your CPU's day and night, this machine is a good buy IMO. You should get a good 3-4 years out of it, especially if you know when to stop upgrading the OS/apps.
    Yes I say you got yourself a good buy there.

  • I'm currently living in Japan. Is there any difference between the US iPad(wifi) and a Japanese iPad(wifi)? Or should I wait till I visit the States to pick one up?

    I'm thinking of buying a new iPad3 but I'm currently living in the Japan. Is there any difference between the US and the Japanese iPad (wifi version)? If so, what are the differences?
    Thanks,
    -F

    Hi, I just watched the video for the Microcell and you have to use your broadband connection to get it to work and the problem is my broadband connection is down the times I'm using my 3G. That's why I use it, because my broadband connection is not working so much of the time.
    Any other suggestions? :-)
    Martha

  • TS1398 hi, my iphone is not connecting to wifi. there is no problem with the connection of wifi. i tried so much but the connection is not stable. some times it connect and sometimes not connecting at all. if connected also its disconnecting again.pls hel

    hi, my iphone is not connecting to wifi. there is no problem with the connection of wifi. i tried so much but the connection is not stable. some times it connect and sometimes not connecting at all. if connected also its disconnecting again.pls help

    At the very least, I recommend you restart your router, (your internet box).
    More detail on your problem is needed - are you in a submarine? On the moon? On a tropical island?
    You can help yourself by providing as much info as you can about your present situation - what kind of router do you have? Have you moved it? DId you update it?  Did you do anything to change your setup, and if you did, what?

  • My Nano 5th Gen loses battery strength rapidly while listening to the radio.  Should there be that much difference than listening to an audiobook or music?

    Should there really be that much difference in the use of battery power between listening to the radio and listening to an audiobook or music?

    http://www.apple.com/feedback/ipodnano.html
    This should be the place.

  • I have the ipad2 wifi and now want the 3G instead, any options out ther besides the obvious.

    I have the ipad2 and now I want the 3G instead. Any options out there besides the obvious??

    The iPad itself can't be upgraded. If you want 3G and you don't want to sell yours (or return it if you are within the returns period), then you could use an iPhone as a personalobile hotpost for it, or get a mifi device which act as a mobile hotspot

  • Is there a difference in Premier and After Effects Performance in terms of intel or AMD?

    Is there a difference in Premier and After Effects Performance in terms of intel or AMD?  Forget the speed issue, assume that the processors are of comparable speed and also assume that the system is built beyond recommended requirements.  When it comes to reliablility and performance of either processor working and managing data with CS5, is there a difference?  I am looking to build a computer with multiple CPU's so i7 if out as well (unless you can convince me that have only one CPU is better than building with multiple)  Thanks for reading and I'm looking forward to any help you may give me!  Bow.

    See Harm, this is why I am a BIG fan of your post!!!  Also thank you John for responding as well.  I have been wrestling with purchasing a new computer for months now looking for a CS5 CPU, trying to find the most economical purchase.  The last computer I had bought was specifically for CS2 and I spent over $8500 dollars for it in 2006.  A dual XEON 2.80 with Hyperthreading.  Back then I thought I had a great machine, but now looking at what I paid for, i feel much wiser.
    I have seen the benchmark test and studied it closely, but until this post, I didn't know how the results translated into real world results.  I figured out pretty quickly AMD is no where near to Intel currently.
    I am looking to edit primarily with AVCHD and will be using After Effects extensively.  So of course, I want processor speed and plenty of RAM.  But it gets expensive.  Sandy Bridge looks like an option but there is a RAM limitation and the recent problems with it.  i7 processors look like a good option but they are also 24 gig limitation.  Of course dual CPU Xeon gives me unlimited RAM practically, BUT i have a limited budget.
    So in looking at the Benchmark Test, (which I love, but can't equate to real world applications - i.e. Time Savings between results - because i don't know what the length of the footage is) it has been hard to gauge a cost/gain benefit when choosing my next machine.
    I noticed your results are 65.0 to ADK's 35.0 under the h.264 CPU performance.  I guess I am asking what is that in a real world time crunch difference?
    P.S. I do realize that the ADK results aren't average.  If you wish, you may reference the #1 system with the top average of 45.0 under the h.264 CPU performance to give me an idea on comparision.  Also, I noticed your machine is overclocked.  Does overclocking make CS5 any less stable?
    Thanks for all you do Harm, I appreciate your dedication to us Adobe followers.  You to John!
    (sorry it has taken some time to respond)
    Also, I noticed you are using Areca ARC-1680iX-12.  Nice!

  • IPhone has no wifi option, only WLAN

    Under Setting in my iphone 4 (in China), I have no wifi option, only WLAN.  And the WLAN is not picking up any of the wifi networks that my husbands wifi picks up fine.  His phone has an option for wifi instead of WLAN.  Software update says I'm up to date, have tried restarting it a number of times.  What should I do?

    Did you setup the iPhone or a store/carrier, etc?
    Do you have very much material or content added to the iPhone?
    If you have not added much if anything, and are comfortable resetting up the iPhone, an option is to go to Settings > General > Reset > Erase All Content and Settings so the iPhone is back to factory, pristine condition and then set it all up again.  Unless there is something strange with this iPhone or the iOS on it, that should revert to the Apple iOS build.
    But first, have you tried going to that sequence and selecting Reset Network Settings instead of the full erase?

  • Wireless sync option not available on Itunes 10.5.  After updating my iphone to IOS 5, the "sync over wifi" option is not being displayed in itunes.

    hi, I managed to update both Itunes and my ios to the latest versions (10.5 and 5 respectively).  I'm unable to see the "Sync over wifi" option in itunes.  Can anyone help?

    Maybe that's why I got lucky?  I have 10.7.2.  I have to tell you howeer that I did not check any check box in settings on the Notebook to enable Wifi sync, or in iTunes on the notebook.  I did have options when setting up the iPad and I selected sync with computer rather than back up to cloud.   Maybe that is another difference?  I feel feel fortunate that as I type this my iPad is syncing over wifi and you're all having trouble.
    Just to confirm I have iTunes 10.5  MacOSX 10.7.2 and iOS5 installed on the iPad.  I'm going to dive in and do the phone now too.  I will report any troubles, or pay more careful attention when the iCloud settings and set up come on the screen.  Maybe I did something else I don't remember.

  • 667 MHz v 800 MHz RAM in a Mac Pro 3,1 (Early 2008), will it make much difference?

    I know that the Mac Pro 3,1 (Early 2008) are supposed to run the 800MHz ram, but I’m aware that they also happily run the slightly less expensive 667MHz ram as well?
    In the real world would you actually notice much difference between the two? Just that I have 24GB of 667MHz that I could swap over from a 2,1 model into this, or would I be better off in the long run biting the bullet and buying some 800MHz ram?
    Interesting to see that OWC seem to ave some kind of exclusive deal on some 8GB 800MHz ram modules that could take the 2008 Macs up to 64GB in total!

    In this case and Early 2008, 667MHz FBDIMMs have never  shown to be an issue, work fine (4% hit at  most, which can also be offset by using all 8 DIMM slots with four sets which improves memory bandwidth to it s best).
    There have been a few 'enterprising' individuals that have had access to and used 8GB DIMMs for 32 and 64GB total memory w/o trouble but in that case you would want 800MHz DIMMs.
    http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#800-memory
    FBDIMMs like many memory modules are not locked to a specific timing and frequency and can be backward compatible.
    These from Amazon are only 2GB DIMMs but known to work in 2006-2008. When you get into 4GB the price has jumped up. And 8GB prices have been in the stratosphere, or had free access to server memory source.
    2x2GB FBDIMM DDR2 667MHz @ $25
    http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
    Komputerbay 8GB (2x 4GB) DDR2 667MHz ECC FB-DIMM (240 PIN)
    http://www.amazon.com/Komputerbay-PC2-5300F-Buffered-FB-DIMM-Heatspreaders/dp/B0 05HIWD5U/
    OWC 8GB FB-DIMM Memory Upgrade Kits for Apple Mac Pro 2008 Released 64GB $320
    http://benchmarkreviews.com/7366/owc-8gb-fb-dimm-memory-upgrade-kits-apple-mac-p ro-2008-released/
    Ideal RAM config is 8 DIMMs - offers 15% improvement memory bandwidth  performance
    667MHz FBDIMMs are cheap, excellent and 4% 'hit' you would never know about.
    http://www.barefeats.com/harper5.html

  • Is there a difference in quality between exporting to .dv in iMovie09 & FCP

    I recently purchased FCP to do batch exporting of full quality .dv files because '09 didn't seem to have that option. I've been messing around with it now, though, and it appears as though both are capable of doing this. I've searched for this information and found conflicting results-- is exporting to .dv in iMovie destructive or is there no difference between '09 and FCP?

    This thread sounds mysteriously similar to this one.
    http://discussions.apple.com/thread.jspa?threadID=2380150&start=0&tstart=0
    If you export to .dv with either FCP or iMovie I'm quite certain that you will be re-compressing your video. That's just the nature of the interleaved file structure of .dv
    I you import .dv into FCP you will have to render the audio ONE time. Not the video.
    If you export .mov files using the current settings (which should be DV NTSC) you will NOT be re-compressing the video. but you will have a .mov file.
    FCP is NOT the right application for archival or any sort of file management tasks. File management is one of FCPs weakest attributes.
    You may want to have a look at CatDV
    good luck
    g

  • I received a car charger for xmas. I have an iPhone 4. Is there a difference in the charging dock between the older and newer iphones? I don't want to damage it by shoving a cable in that is designed for a newer model.

    I received a car charger for xmas. I have an iPhone 4. Is there a difference in the charging dock between the older and newer iphones? I don't want to damage it by shoving a cable in that is designed for a newer model.

    there are 2 connectors the old pin30 and the new ligthing bolt
    they don't look very much alike so if anybody were damage byt forcing it in it would be their own fault seeing how diffrent they are

  • Is there any difference of the Downloading speed of Folio if i'm in Enterprise or Professional Editi

    Hi Adobe,
    I have compared the downloading time between Adobe Multi-Viewer and Zinio App(also hosting digital magazine), I found out that it is so much faster in Zinio.
    Are there any difference of the downloading speed if let's say the I'm in Enterprise or in Professional edition?
    Thank you for the response!

    There is no speed throttling that I’m aware of.
    Bob

  • Are there any differences?

    Are there any differences? on Ipod Video bought in USA and Europe? or are they just the same?
    Ive heard that some people have problem with ipods in europe with the pal system when they bought it in USA.
    Regards Kim

    The only difference I would think there would be between iPods sold here or in Europe is the default option for video out display. So, if you buy your iPod in Europe, and you want to display something from your iPod on a TV in the US, you would just have to change and option. Here is an article that goes over that a bit:
    http://docs.info.apple.com/article.html?artnum=300250

Maybe you are looking for

  • Need help connecting to my external drive

    I have an EXTERNAL drive connected to my iMac G5 running 10.4.11. I can not access this drive via the network from my MacBook running 10.5.7. I've check file sharing on both machines prefs. I can connect to the iMac's HD from my MacBook via my networ

  • Transaction/Movement type on the vendor line item

    When we post to a vendor using F-43 (or FB01) using posting key 31. We want the field Transaction type to be available for input in the vendor line item. But this is not happening. note: In the FSG of vendor recon account and Posting key 31 this fiel

  • How to associate hardware information into an Oracle Table?

    Hi, I am new on Windows 2000 . I am using the following script in order to get the windows 2000 hardware information. I am using 8.1.7 version of ORACLE. I am using a table "Server Hardware"(Server list,Network Adapter,RAM). I would like to ask that

  • Reg Business objects Administration Knowledge trasistion of existing system

    Hi Experts,   in my senario i have to attend a BO ADMIN KT,could any one help me on tmpaltes or checklist for KT. Thanks, BharathU

  • Audio lost when converting from standard to widescreen

    I have been working on an iMovie project for about two  weeks and just noticed that there was an option for widescreen vs standard mode.  I read through the instructions and it said that one can convert to widescreen at any time in a project. I conve