Wifi password issues on latest update

Hi, I updated to iOS 6.0.2 and my iphone 5 had troubles connecting to the home wifi. So I reset network and now it won't accept the password. I have done the same to the old iphone 3G (reset network) and used same password and it was accepted, though it says it is upto date with iOS6.0.1. Any ideas??? Cheers :-)

I get this problem too.
Work WEP network with multiple access points. 13 character key. Recurrent 'incorrect password' prompts, although password is entered correctly. Reset all network settings cures the problem for a day. Then go home and connect to WPA network without a problem. Return to work, and can't join network. Re-entering password doesn't work. Repeatedly cancelling password box sometimes allows automatic reconnection at another access point later in the day.
Very frustrating.

Similar Messages

  • Is there a fix for the wifi connectivity issue after ios6 update?

    Is there a fix for the wifi connectivity issue after ios6 update?
    Cannot connect to any wifi since update to 6.0.1
    How do I get update to 6.0.2?
    Will that even help?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • MBPR wifi issues after latest update to 10.9.2

    Hi all,
    After the latest update to 10.9.2 my Macbook Pro Retina (1st gen) seems to be having issues re-connecting to wi-fi after I wake it up from sleep. Although I've read stories about wifi-issues with the retina line in general, I've been lucky enough to have mine run pretty smoothly so far. That is until the latest update ... for some reason, this happens EVERY time i close and open my laptop.
    And yes, it's a easy fix. Usually all i need to do is to turn off wifi and turn it on. But it's getting slightly annoying having to do that every time.
    Has anyone else had this issue? and are there by any chances a solution for this problem?
    Appreciate the help!
    All the best
    Farid

    Hello thegreatbeard,
    Thank you for the details of the issue you are experiencing with Wi-Fi on your MacBook Pro.  I would be concerned about this too.
    I recommend following the steps in the section labeled, "Symptom: The network connection drops unexpectedly" in the article below to resolve an issue like the one you described:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Thank you for posting in the Apple Support Community.
    Best,
    Sheila M.

  • VPN issues following latest update

    Since the latest update in the o/s on February, my IPAD and IPHONE will not allow web pages to be opened once my VPN has connected. I have spoken many times to the VPN provider and they say it is Apple's o/s update that is the problem. The VPN works fine on my laptop. Why is it that no one seems ables to fix this very sensitive issue? As someone who uses their VPN daily, I miss the service very much.

    Same issue here. Vpn does not work on the ipad with ios updated but works fine on the older version ios.
    Been several weeks now. Would be good for apple to fix this!!!!!!!!!

  • Highlight text issue in latest update

    Hi,
    The latest update is great and I run it in iPad 3 and iPhone 5.
    However you can longer highlight individual words or text. You can only highlight full sentences.
    The markers at the left and right cannot be moved closer to each other isolate a word or two, they just highlight the current sentence.
    Is this a known issue?

    Hi Dennis,
    Thank you for your prompt reply.
    So I am presuming the update has been submitted to Apple and is awaiting their approval before its available?
    I understand that process can take time!

  • Open GL issue after latest updates: Missing GL version

    Having issues with OpenGL after latest updates to OSX and Safari. iTunes will not display cover art and Angry Birds responds glewInit failed: Missing GL version. The is a Mac Pro with 10.7.4 and Safari 5.1.7.
    Anyelse seen this? How is this fixed?

    Final chapter in this saga for anyone else who experiences this.......run reparPermissions against your disks prior to upgrading. After having to rebuild the boot disk a couple of times and upgrade, had no problems with 10.7.4 but would always get Missing GL Version after Safari update. Ran DiskUtil and repaired permissions prior to Safari update and finally got it to pdate without causing GL issue.
    Still working on how to not need to delete my previous backups when rebuilding machine (apparently TimeMachine always tries to create a new back sparse folder and thus may waste original space from your previous backups).
    Thanks to A Brody for the suggestion about repairing disk permissions!
    Edward

  • Epson xp-600 wifi password issues

    I need to enter my wifi password everytime I want to print on Epson XP-600.  Is there a solution to this problem?

    No tricks. It is what it is.

  • Safari issues following latest update

    Hello,
    Am having issues with Safari following the ios8 update - pages not loading, menus not selectable. I am running torch as an emergency and have no issues with that.
    All seems to have happened after yesterdays software update.........imac, IOS8
    Any suggestions?
    daz

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Issues with latest update

    I have downloaded and installed the latest version of firefox, when I load firefox all I get is a black window

    hello kidsarocker, other users with this problem all had an embedded intel hd3000 graphics card with an old driver present. in case this also applies to you, here would be a link to update the driver, which in turn should also address the black firefox problem: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764 (for win7 64 bit)
    in case this doesn't solve the issue or does not apply to your system, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • MAJOR Wireless, Safari, Dock & Finder issues after latest updates

    I'm having major issues after the latest AirPort, Security Fix and Safari updates in 10.5.2: Safari keeps crashing every hour, Wireless connections time out and Airport occasionally crashes when I try to turn it off/on. Sometimes the systems gets stalled and has lag - I'm not sure if Safari crashing is causing this or it's the system that causes Safari to freeze and crash - often the dock becomes unresponsive too and makes me force shutdown and reboot. I've had to reboot like this more than 4 times today, something isn't right. My questions, therefore:
    1) Is there a way to restore my Mac to the state BEFORE the latest upgrades?
    2) I can't recall the exact names and versions of the updates, is there a way to access the update log files, so that I can take notes on what actually was updated and when?
    3) Is there any other way to access log files that may have more information on the crashes that I've had lately?
    Thanks in advance!

    Hi Reinis,
    In this situation, the first thing I would do is log into a different user account (if you do not have one, create one) and then see if the symptoms persist with the new user account. To directly answer your questions:
    1) Is there a way to restore my Mac to the state BEFORE the latest upgrades?
    Archive and Install using the OS DVD or by using Time Machine if you have it enabled.
    2) I can't recall the exact names and versions of the updates, is there a way to access the update log files, so that I can take notes on what actually was updated and when?
    Fire up System Preferences, click on the Software Update icon and then select the Installed Updates tab.
    3) Is there any other way to access log files that may have more information on the crashes that I've had lately?
    Console, which is in your Applications/Utilities folder.
    Kryten

  • Battery Life / Recharging issues after latest Update

    I bought the Xperia Z2 beginning of April and it was fine. The battery lasted for about 2 days with Active Hotspot continuously running for approx. 18 hours. After updating to the latest software version, the phone runs pretty hot and with Active Hotspot on, while hardly using other programs, the battery is empty after 8 hours, despite having the phone always on the charger. Several times an error message pops up, telling that the phone consumes more power, then the (original) charger is providing! Is that update rather a downgrade? Or is it the intention to get the Hotspot literally hot?

    Hi there!! I've been using my Xperia z for the past one year. Till last week I didn't had any problem but now I'm not sure what happened to my mobile.. I have listed all the issues below. I really need your help and support to solve this issue and please get me a permanent fix..
    1. Battery is draining too fast(very fast)
    2. Mobile is always hot even if I don't use. When start using apps like game, browsing or watch any video, I feel that I'm holding an induction stove in my hand.
    3. "Throw" option is not working
    4. When I make a call I don't hear anything through earpiece rather I'm using loudspeaker speaker.
    Plzzz help me and get me a solution.. I'm afraid to take my mobile to service center.. Please advise what needs to be done..

  • Music syncing issue after latest update

    I'm having issues syncing my music on my iPhone 4 after this latest security update. Some of the files seem to be "stuck" on the phone. They won't remove, others just won't play, I can't add anything to the phone. Etc. SOS!!!

    Have you tried re-installing the firmware through Nokia Suite? Remember to backup all your phone contents when prompted by Nokia Suite.

  • WiFi-Network Issue After Installing Updates, When I turn my mac on from sleep. Help..

    I recently installed updates on my MacBook Pro Lion and after installing MacBook Pro WFI Firmware Updat 2.2 and Thunderbolt Software Update 1.0, when I put my mac on sleep and come back, my mac will not connect to my network automatically. I have to turn off WiFi and turn back on in order for me to connect again. I didnt have this issue before installing these updates. Can anyone help me with this? Is it a software issue or hardware issue with my mac?

    I'm very angry about this. This has been ongoing for quite a while, and the past several point updates (10.7.1 and 10.7.2 haven't fixed it.) I'm on 10.7.2 and still having this problem 100% of the time when I wake my 15" 2010 MacBook Pro from sleep by opening the lid. Even thought it's connected to the same network (Airport Express, fully updated) when I close and open it, WIFI does not reconnect, and I have to manually turn it off and on again before it will work.
    I'm not the only angry one about this though. Do a search on the Apple Communities forums for "macbook pro lion wifi sleep" to see many other users with the same problem.

  • Nokia 301 icon issues following latest update

    I have got a Nokia 301 which usually works fine.
    I`ve just updated the phones software to the latest version. My problem is: -
    When I click on the Mail icon, nothing happens. So I can`t see my email account I added.
    Is there a way of sorting this out?
    Many thanks.
    Ned1 

    I have previously deleted the email account and then added it back in.
    The problem this time is when i click on the Mail Icon, it doesn't open up.
    I don't really want to do a factory reset. If i have to i will.
    I just wandered if there was a way of bypassing the Mail Icon to access my email account, or deleting the icon and reinstalling it.
    Ned

  • Theme graphical issues since latest update - Gnome 3

    Just did a total -Syyu update, so I don't know exactly what caused this, but my Gnome3 theme is now really odd. Text is difficult to read, top banner is changed. Not sure if this was intended or not but it's really ugly and I suspect an issue.
    Screenshot:
    http://i.imgur.com/NOlre.jpg
    Any ideas?

    I believe it that your theme needs to be updated for gtk3.4. See this thread https://bbs.archlinux.org/viewtopic.php?id=140176 post#5

Maybe you are looking for

  • Which driver on the Install DVD is for HFS+ read in Windows?

    I installed Windows 7 Enterprise x64 on my MacBook of course about a week before Snow Leopard was released and have already gone through the tedious, time consuming process of getting all of the Windows drivers working for Win7x64. I really don't wan

  • How to migrate Mac Pro to MacBook Pro?

    After cloning my Mac Pro Boot Camp XP2 to my MacBook Pro via Netrestore I realized I'm not sure how to deal with the hardware differences. XP boots fine on the MacBook Pro but has no trackpad, and no USB mouse support. I tried to reinstall "Boot camp

  • Persistent Hum Is

    I am using a X-FI card, but I believe the hum issue I am trying to address is card independent. I want to run iTunes through my computer sound card to my stereo. That worked for a while, but I made some hardware changes and now I get a loud hum when

  • How to access TC in Windows 7

    How can I access the TC from Windows?

  • Work order material issue request error

    In Oracle EAM Maintenance super user responsibility i am getting following error while trying to request material issue " Picking rule fails to find a source locator that meets the rules restrictions " what went wrong? could any one explain