WiFi printing not working

System - MAC 10.9.1 Maverics
Printer - HP office jet 4620 all in one 
Product no. - CZ152B
Firmware Ver. - CWM1FN1341DR
Can print with USB cable attached
Can print over the internet (email address)
Can print over the WiFi from HP Utility, - Printer Status Report, Wireless Network Test Results, HP Network Configuration Page all printed by WiFi
Printer attached to 802. wireless and IPv4 settings
Printer can be seen on BT home hub as attached to the network
Just unable to print from any other application.
Unable to set up wifi settings since HP printer update and OS Maverics, have also noticed that iphone and ipad are now unable to locate printer when they used to with ease. 
I have tryed ove rthe last couple of days to enable WiFi but with no success by using HP help list of what to do with no success. 
Can anyone help?
This question was solved.
View Solution.

I have checked all connections and they all did compare with the printer and the router.
I did end up re-installing the driver twice and eventuall the printer and router did started talking together and printing.

Similar Messages

  • Canon ip5200r wifi printing not working

    I have an old ip5200r canon printer.
    It's been a pain over the years - each time i update my operating system i have had to update the drivers and fiddle around to get it to connect to my mac via wifi. USB printing is fine and always works.
    With 10.10 however I am totally stumped. I have managed to connect the printer to the network, and the printers and scanners system preferences can see the printer and it tells me it is installed, but I am unable to print.
    My partner often uses the printer and constantly complains about walking around the house and plugging  a USB cable in. It should be so easy, I am unsure why canon make it so hard.
    I was wondering if anyone could offer any possible insight or recommendation?

    If you haven't done so already, try resetting the printing system.
    OS X Mavericks: Reset the printing system  also Yosemite

  • I have set up my airprint wifi printer which works perfectly with the HP eprint app. However, when i view an email and click on the top right arrow button and select "PRINT" on my ipad nothing happens????...

    I have set up my airprint wifi printer which works perfectly with the HP eprint app. However, when i view an email and click on the top right arrow button and select "PRINT" on my ipad nothing happens????...
    Also, when im viewing websites and i find something i wish to print, same again, if i simply click on the print option at the top right of the screen nothing happens... the only way I can print is if i copy the weblink of the site page then click on my HP eprint app and paste the web link, then select print, it prints off fine.. but its it such a pain to keep copying and pasting links or screen dumping emails just to print...

    Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app.  I am certain other applications also need this information.  Although lengthy, I could not find a more comprehensive place to retrieve this information.  Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Printer not working following iPad uodate

    Printer not working following iPad upgrade

    Hi,
    Is the printer not mechanically working or are you having a problem with printing wirelessly from your device? Was the upgrade to the ipad software or did you get a new ipad?
    Try restarting your apple device - It's a simple fix that sometimes helps re-establish the connection to the printer.
    Other things to check would be that there have been no recent changes to the wifi password.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired

    I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired and i also reset network setting but nothing gonna be worked

    Sounds like the device was dropped at some point and damaged as a result.
    Take it to Apple for evaluation and a replacement.

  • TS4062 My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

    My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

    Hello there, TempestBelcher.
    It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
    Apple - Support - iPhone - Calls Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/calls/#section_0
    If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Wifi is not working in my iphone 4s after upgrading its ios to ios 7.. now i want to downgrade it back to ios 6.1.3.. is it possible to do it and if yes then HOW?? Please help

    wifi is not working on 4s after upgrading its ios version.. please help me, what to do???

    thanks, but what if i restore my iphone using itunes, will it help me? actually i brought this phone from australia and now i am using it in india and it is factory unlocked.. so if i restore it to factory setting then shall i have to go through factory unlock process again or my phone will stay activated for indian telecom network?

  • Wifi Sync not working on iOS 6 and iTunes 10.7 with iPhone 4S

    I am running Windows 7 64-bit but WiFi Sync is not working on either my iPhone 4S or my wife's iPhone 4S.  Worked fine before upgrading.  All settings look correct in iTunes 10.7 and on our iPhones 4S's.  Already tried uninstalling iTunes and all associated Apple programs (Bonjour, Apple Mobile Device Support, Apple Application Support, etc) and reinstalling iTunes but no help.  Temporarily disabling Norton Firewall did not help.  If I hook up either of our two 4S phones via USB wire, they Sync and Backup fine.  Just WiFi Sync not working.  Can't initiate sync from iPhones because button is ghosted stating it is waiting for PC to be present.  Phones don't show up under Devices in iTunes unless hard-wired via USB cable.  Any suggestions?

    I am getting sync issues too (although on OSX) - seems like others are getting issues too:
    https://discussions.apple.com/message/19834721#19834721
    Good luck,
    Chris

  • My iPod Touch 3rd gen is screwed up the backlights screwed and the Wifi is not working its showing no wifi! What should i do??

    My iPod Touch 3rd gen is screwed up the backlights screwed and the Wifi is not working its showing no wifi!

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    For backlight
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                  
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.                     
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • HP Laserjet 1320 attention light on, printer not working.

    I checked for paper jam, reseated printer cartridge, removed and reinserted printer and line cord plugs.  Turned printer on and off.  Attention light remains on and printer not working.

    Hi Robert8695,
    Let's manage one issue at a time. Regarding the error "unable to establish a two-way connection with the device", check out the link below for troubleshooting you can do to resolve it:
    http://goo.gl/u3Snr
    Let me know what happens and if the other problems persist as well.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.

    My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.

    The problem would seem to be in the firewall in your router.  Have you tried disabling it? I assume you've updated the router firmware, right?  Consider bypassing the ISP provided router (using it as a modem only) and unsing another device such as an Aiport Express.

  • Wifi is not working after update to ios5.0.1 in my iPhone 4s

    Recently I update to new version of ios5 after that my wifi connectionis not working .can any one resolve this problem please?

    I had the same issue before. But not any more....
    Step1: Turn off your phone.
    Step2: Unplug the router from supply.and turning off is different. So unplug it.
    Step3: turn on router and phone back.
    Try connecting now; which should work ....
    This fixed my phone
    Check it out.....

  • TS1398 when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to

    when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to

    First, grow up.  Just because YOUR phone isn't working, doesn't mean Apple put out bad software.  I've not had any difficulty, nor has anyone else I know.  And just how is Apple risking lives with Bluetooth kits not working?  It's YOUR decision to talk on the phone or text and drive.  Not Apple's.
    We're users here, volunteering our time to help others.  Posts like yours, which are whiny and ranting, simply means we're likely to ignore you and not provide you with any help.  Not to mention, it makes you look absolutely foolish.
    Further making you look foolish is the fact that you haven't even asked a technical support question, nor have you provided anyone here with any troubleshooting steps you might have taken, including those recommended in the user guide.
    Good luck getting help.
    GDG

  • Wifi is not working properly once i updated to the new operating system.

    My I pphone 4s wifi is not working properly once the softwere is updated to the new IOS.
    It shows the wifi but when selected its says "unable to connect". I tried connecting to many wifi networks but gives the same error message.
    Kindly advice how to rectify this

    I am trying that and itunes says that you have to have icloud backup off. My icloud "button" is a whiteish green and does not respond to touch. I can't turn it off.

  • Wifi does not work correctly on iPad Mini w/ Retina display

    I've found that Wifi does not work properly on the iPad mini w/ Retina display.
    Some background: I own three iPads (iPad mini w/ retina display, iPad mini, and iPad 3rd gen), an iPod touch 5th gen, and a Macbook Air, and use them all frequently with my pocket Wifi router.
    None of them exhibit any Wifi problems whatsoever except for my iPad mini w/ retina display.
    Here are the details:
    In the middle of using Wifi with my pocket Wifi router, the Wifi connection will abrubptly drop, then reconnect. After the Wifi reconnects, it is no longer able to connect to the internet (even though Wifi itself is connected).
    Once the iPad mini w/ retina display's Wifi gets into this state, the following may or may not restore WiFi temporarily:
    Restart the device
    Reset network settings
    Yet, even if connectevitiy is restored, the problem will happen again within minutes.
    When the iPad mini w/ retina display gets into this state, the Wifi on my iPod touch, other iPads, and on my Macbook Air work perfectly fine, so I know the problem is not with my Wifi device or it's connection, but specifically with the iPad mini w/ retina display
    Note:
    The iPad mini w/ retina display never has any issues with my home or work Wifi networks. The problem only happens when connected to my pocket Wifi device. Yet, all of my other iOS devices and my MacBook Air work perfectly with my pocket Wifi device, therefore I know the problem is not with the pocket Wifi device, but with the iPad mini with retina display.
    Solutions:
    Resetting the iPad mini w/ retina display to factory settings does not solve the problem
    Resetting network settings on the iPad mini w/ retina display does not solve the problem
    I have even replaced my original iPad mini w/ retina and got a new one. Yet, the new device exhibits the exact same behavior as the original device.
    Conclusion:
    I know this is not a hardware problem (since it happened with both my original as well as replacement device).
    I know this is not a problem with my pocket WiFi router, since it works perfectly with all of my other iOS devices and MacBook Air.
    Therefore, this must be a software / firmware bug with the iPad mini w/ retina display. Apple will need to fix this in a future software update.
    Has anyone else seen this problem?

    I too have experienced this issue over the past two days... I have a 16gb ipad mini retina, for reference. I bought the device one week ago, and had not experience any issues at all until bringing my device to work. I logged into my work's enterprise level wireless network both yesterday and today, maintained normal wifi capabilities for 2-4 hours each day, and was then randomly dropped, both days. I tried hard resets, resetting my network settings, airplane mode, etc. Nothing has worked. I am still offline on my ipad mini retina.
    My iPhone 5 is sitting right next to my iPad mini retina. The iPhone is currently connected to the same very network, and has been for the past two years. I have never lost connection on my iPhone's wifi, just my iPad mini retina.
    This must be some kind of bug, as it does not sound like a hardware nor network issue.
    Hopefully they fix this in 7.1.

Maybe you are looking for

  • I can't sign in...too many apple email addresses

    As of right now my iphone is useless. Too many past Apple email addresses have been assigned by Apple, which I never asked for. Keeps asking me to change password. Sez my birthday is wrong. I cannot update my phone. Try to call, but you want to charg

  • Product type 56A - what do clients use as the underlying

    Hi All I now understand that you associate some borrowing transaction type/product type combination to product type 56A as a facility in the 'Admin' tab. The question I have is what do clients normally use as the product type/transaction type combina

  • Query (Select) that return TRUE  or false

    Hi I Need to do a query that return true or false SELECT TRUE INTO v_Envia_Maplink FROM SNCDE, SNAPL WHERE SNCDE.CDESEQ = OLD.CDESEQ AND          SNAPL.APLCFJSEQ = CFJSEQ_VR AND          SNCDE.APLCOD = SNAPL.APLCODHow can to do it ?

  • GRC 10 - Job Sync Legacy System large files

    When I run the job GRAC_REPOSITORY_OBJECT_SYNC sync with the files from the legacy system, the file "USER_PERMISSION.txt" is about the size of 231 MB, and this happening to this job sincornismo canceled, the error "TSV_TNEW_PAGE_ALLOC_FAILED", the ba

  • Operating system not supporting download of InDesign CC

    Hello, I would like to download a trial version of InDesign CC and have learnt that my operating system does not support the latest version. Is there any (cheap and fast) way I can download it without updating my computer? Thanks, ABurdo