Wifi problem, switch not responding
wifi switch not responding
Hello,
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
Similar Messages
-
Hi Expert , crystal report export problem. system not responding
Hi,
crystal report export problem. system not responding.
Thanks
Rajkumar GuptaDear Raj,
Please try this
Try
Dim oSubReport As CrystalDecisions.CrystalReports.Engine.SubreportObject
Dim rptSubReportDoc As CrystalDecisions.CrystalReports.Engine.ReportDocument
Dim rptView As New CrystalDecisions.Windows.Forms.CrystalReportViewer
Dim rptPath As String = System.Windows.Forms.Application.StartupPath & "\" & rptName
Dim rptDoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument
rptDoc.Load(rptPath)
rptView.ShowExportButton = True
rptView.ReportSource = rptDoc
For Each oMainReportTable As CrystalDecisions.CrystalReports.Engine.Table In rptDoc.Database.Tables
oMainReportTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
Next
For Each rptSection As CrystalDecisions.CrystalReports.Engine.Section In rptDoc.ReportDefinition.Sections
For Each rptObject As CrystalDecisions.CrystalReports.Engine.ReportObject In rptSection.ReportObjects
If rptObject.Kind = CrystalDecisions.Shared.ReportObjectKind.SubreportObject Then
oSubReport = rptObject
rptSubReportDoc = oSubReport.OpenSubreport(oSubReport.SubreportName)
For Each oSubTable As CrystalDecisions.CrystalReports.Engine.Table In rptSubReportDoc.Database.Tables
oSubTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
Next
End If
Next
Next
'Setting Paper
Dim rawKind As Integer = 0
Dim printSet As New System.Drawing.Printing.PrinterSettings
For i As Integer = 0 To printSet.PaperSizes.Count - 1
If printSet.PaperSizes.Item(i).PaperName.ToUpper = PaperName.ToUpper Then
rawKind = CInt(printSet.PaperSizes.Item(i).RawKind)
Exit For
End If
Next
Dim MyTest As New SaveFileDialog
rptDoc.PrintOptions.PaperSize = CType(rawKind, CrystalDecisions.Shared.PaperSize)
rptDoc.ExportToStream(ExportFormatType.Excel)
'rptDoc.SaveAs("C:\TBKING.xls", True)
'''How to export the report
Try
Dim CrExportOptions As ExportOptions
Dim CrDiskFileDestinationOptions As New _
DiskFileDestinationOptions()
Dim rename As String
rename = rptName.Replace(".rpt", "")
Dim CrFormatTypeOptions As New ExcelFormatOptions
CrDiskFileDestinationOptions.DiskFileName = _
"c:\Report\" & rename & "_Export_File.xls"
CrExportOptions = rptDoc.ExportOptions
With CrExportOptions
.ExportDestinationType = ExportDestinationType.DiskFile
.ExportFormatType = ExportFormatType.Excel
.DestinationOptions = CrDiskFileDestinationOptions
.FormatOptions = CrFormatTypeOptions
End With
rptDoc.Export()
Catch ex As Exception
MsgBox(ex.ToString)
End Try
'' end by kevin shah
rptView.Show()
rptView.ShowExportButton = True
Dim oFrm As New System.Windows.Forms.Form
rptView.DisplayGroupTree = True
rptView.Dock = System.Windows.Forms.DockStyle.Fill
rptView.Location = New System.Drawing.Point(0, 0)
oFrm.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
oFrm.Controls.Add(rptView)
oFrm.Name = "Report Viewer"
oFrm.Text = "Report Viewer11"
oFrm.ResumeLayout(True)
oFrm.WindowState = System.Windows.Forms.FormWindowState.Maximized
oFrm.TopMost = True
oFrm.ShowDialog()
Catch ex As Exception
objMain.objApplication.MessageBox(ex.Message)
End Try
By pressing this button XLS file be generated on C:\report\
Hope this will resolved the issue
Thanks
Kevin -
Wifi problem did not solve!
Hey guys ! After the update if ios6.0.1 ! My wifi still did not solve! It does not connect when it in lock screen mode. It will auto connect back after I unlock my screen! Anyone have the same problem with me? Any solution to contact apple or a solution for me? Thanks!
This is the way iOS is designed to work.
There is no issue.
Wi-Fi turns off in sleep mode to save battery life. Wi-Fi will stay on in sleep mode if the device is plugged into external power. -
App switcher not responding after closing an application
I'm running OS X 10.9.4 on my late 2012 MacBook Pro Retina and I am experiencing an odd issue where the App Switcher is not responding right after closing an application. It seems that some applications cause this issue more than others. For example: when I closed Numbers and then attempted to go to another application using the App Switcher, the App Switcher did not respond to my respond to my requests for at least 10 seconds. It's as if there is a library that is getting locked by the closing application that prevents the App Switcher from being launched.
Has anyone else experienced this issue? If so, is there a resolution to it?
Thanks for the assistance.
ChrisYou will need to build the application through the project explorer, set the the .rtexe to 'Run as startup', and then deploy it.
'How Do I Deploy a Startup Executable to my Real-Time Controller?'
http://digital.ni.com/public.nsf/allkb/B37FA04A1CB84B6C862571A30060EF03
If that is still not working, you may want to consider:
1. Checking to make sure that you can establish a connection between your project and the myRIO. Right-click on your myRIO target in the project and select 'Connect'
2. Verifying that you can run your code interactively (i.e. run your RT code directly from the host computer)
3. Writing a very simple myRIO application that toggles a user LED. This will allow you to visually see whether or not the application is running.
'NI Community: Toggle User LED on cRIO Target'
https://decibel.ni.com/content/docs/DOC-29852
~ Q ~
-
I keep on comparing my Iphone5 to the Iphone 4s and Ipod touch of my roommate. His Iphone and Ipod have full bar of the wifi connection indicator but my Iphone5 has 1 or 2 bars or more often does not have wifi indicator. We were 15feet away from the wifi machine, but my friend's gadgets has full connection, mine does not have, i need to change position to get one.. so how is that? does my iphone 5 broken?
1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two and tap the minus sign to close app.
2. Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo -
No matter how many times I toggle the Hold Switch, my iPod will not work on it's own. It will only work when docked with my iBook.
Any suggestions?try a reset.. PUSH AND HOLD the menu button and the middle button at the same time for 10 seconds.. it may not work the first time. you may have to try it a few times before it will work..
-
Wifi button does not respond; won't move
Today I lost wifi on my iPhone. Tried to turn it on in settings but the "button" on the screen is totally unresponsive. Help!
Duplicate post: http://forums.ni.com/ni/board/message?board.id=170&message.id=248679
Andrew Alford
Production Test Engineering Technologist
Sustainable Energy Technologies
www.sustainableenergy.com -
Problem: ipod not responding [for eight hours]
well i just got my ipod traded in yesterday afternoon. so i am working with a brand new ipod mini. it took me a while to have everything set up for iTunes to actually recongize the ipod. finally it did. finally i got to listen to music. well so i updated my music files again, delete some songs. got the ipod to update. but then when i tried to eject it: i tried to eject it from my computer first [with this ipod, i want to do everything exactly the right way] so i went to safely remove hardware, and safely removed my ipod from my computer. so then i unhooked it from the computer. and it froze. i have dealt with a frozen ipod before, but this is ridiculious. i tried to reset it [a no go] + i hooked it up to my computer [still a no go] i then looked on apple. nothing but: reset it, ok it isn't reseting? service it. why should it did to be serviced if it hasn't even been working for 24hrs yet? my ipod is next to me laying while being hooked to the computer, i left it attached to my computer all night long with iTunes open. still frozen + won't restart. i am really mad, because i finally got a new ipod and it won't work. any tips? can i just go back to the apple store and have them check it out? or is there a fool proof way to reset it that apple isn't telling me/us?
Hi Coolsmartygirl,
Welcome to Apple Discussions
You might want to try the The Five Rs first before going to back to the Apple Store.
Jon -
Hi. My Ipod Touch switched off in the gym during exercise (got wet or battery wend down). I tried all the troubleshooting hints but nothing helps. It is not responding, not charging and is completely dead. I tried various charging from different sourches but nothing happens.
Any advice please?If you tried everythng here then it is time for an appointment at the Genius Bar of an Apple store. It appears you have a hardware problem.
iOS: Not responding or does not turn on -
My iPhone 4S ios5 has suddenly stopped letting me connect to any wifi. The wifi line in settings has gone grey, reads 'no wifi' and does not respond to touch. How do I get reconnected?
HI there,
You may want take a look at some of the troubleshooting steps found in the article below.
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Hope that helps,
Griff W. -
Problem with adobe premiere CS5 file not responding
I have a problem with Adobe Premiere software, some time ago I was given a file in Adobe Premiere project contains a hard drive to my revision. but when i try to do the project on my computer I was often faced with the problem of not responding. What should I do with this constraint. Thank you.
I would suggest your first action to be logging this question on the user forum for Adobe Premier, not this one for Adobe Captivate.
Try here... -
Strange wifi problem on a brand-new MacBook Pro
Hey there, I'm new here. Desperation has got the better of me, and I hope I can get some advice.
So, last sunday I bought a brand new 13" MacBookPro with 2.8g i7 processor and 10.7.2 OS (I can't update to 10.7.4 because System Update tells me the download has been tampered with or corrupted after I waited 2 hours for it to finish, but I'm trying a direct download from the website). Here's the exact product: http://www.amazon.com/Apple-MacBook-MD314LL-13-3-Inch-VERSION/dp/B005CWIZ4O/ref= sr_1_5?ie=UTF8&qid=1340301247&sr=8-5&keywords=macbook+pro+13
Everything is all perfect except for a strange wifi problem. Note that the wifi does not turn-on or off, it doesn't disconnect after 'sleep', it doesn't get less speed, it doesn't constantly leave a preferred connection (once I chose my home wifi it always connects to it no problem). The wifi bar is always full. What is wrong is that the internet is kinda 'glitchy'. The best metaphor I can think of is that it's like a car that has to be pushed down the road before the engine can start. Please, bear with me because this is kinda hard to explain and I'm not good at tech lingos.
One of the symptoms is browsing can get really slow and inconsistent, almost as if the wifi gets turned off in the middle of browsing. For example: if I look something up on Google and then open 5 new tabs, probably only 2 or 3 of those tabs will eventually load while the other two will not get past the long 'http:.......google.....etc etc' address and will eventually show one of those 'error loading page because there's no Internet connection' notice. This happens a lot. Sometimes I have to refresh/retry loading a page a couple of times before it finally loads, then usually everything will get back to normal and I will be able to open multiple tabs with no problem, but in a couple of minutes I would try to open another site and the problem will start again.
So I tried to see how it does with downloading using iGetter. Fortunately I also have a Macbook (white-plastic casing one) and my brother has an old 2006 MacbookPro so I can compare. With those two older Apples iGetter starts receiving data in less than 8 seconds after I click Start, while my brand-new Macbook Pro can take up to 15-20 seconds, sometimes it doesn't even start at all and I have to re-click the start button. But once the download actually starts (on my new MacBook Pro), it downloads like normal, it doesn't stop and the speed is also as good as I can get. Strange huh? Hence, like a car that has to be pushed before the engine starts.
I also tried 'speed testing' from a website with all 3 laptops. On my old MacBook and my brother's MacBook pro, once I click 'begin test' it takes only a couple of seconds of 'ping' before the download/upload speed measurements start, but with my new MacBook Pro (just like with iGetter) it takes up to almost a minute before the measurements start, sometimes it won't start at all and I have to re-start the test.
Well, thanks for reading. And hope you can help me shed some light into this. Because it is really preventing me from really enjoying my new MacBook Pro. And if this is most likely a hardware problem, I'd better get back to the store and try to get it replace or something while it's only been 5 days. *cheers*Hey guys.. Thanks for the replies. Unfortunately, I bought the MacBook in Indonesia where there are no such thing as an AppleCare. The only option is to leave the Apple product to one of the 'Authorized Apple care centre' and have whoever do whatever to it without guarantee of success. As for returning it and getting a brand new one, I also don't know if there is such a deal here, but that's actually a good idea, will try to go to the store tomorrow. Although, I'm worried that the problem might be with OSX Lion or something and getting a new one won't help.
mark75090, I've tried resetting the router when I first noticed te problem, didn't work though. I've checked my new MacBook's wi-fi (option+click wifi bar) and it says 'PHY Mode: 802.11g', so does my MacBook and the old MacBook Pro. I don't know what those mean though, and I don't know whether or not my router is an N., can you tell me more please.. I have tried with the other two turned off, and only the new MacBook using the wi-fi but the problem persists. I have also tried connecting directly to the router, but as I described, the problem is too subtle for me to notice the difference.
Also, if I create a brand new Wi-Fi connection in network preferences and connect to my router through the new Wi-Fi profile, the problem seems to be gone for an hour or so, then it always comes back though. I have also just finally installed 10.7.4, but it doesn't help either. -
Works in safe mode but following all steps hasn't fixed problem of not responding.
If you have submitted crash reports then please post the IDs of one or more recent crash reports that have a "bp-" prefix:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the Report ID of recent crash reports on the "Help > Troubleshooting Information" page (about:support).
*Click the "All Crash Reports" button on this page to open the <b>about:crashes</b> page and see all crash reports.
If necessary then you can open <b>about:</b> pages via the location/address bar.
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
If you can't open Firefox, see:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
*https://developer.mozilla.org/How_to_get_a_stacktrace_for_a_bug_report -
Power off button not responding
Power off switch not responding... Help!
Try to reset the device (try it even though as you said the power button (or sleep/wake switch) is not functioning)
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.
If the switch is indeed physically bad, you can get by in the meantime (or until you can get it evaluated/fixed) by using the the AssistiveTouch panel (this floats a virtual button on the screen that you can use to access various funtions of the iPad, one of them being the sleep/wake switch). I use this all the time, even though my buttons are just fine (cuts down on wear/tear on the physical buttons).
AssitiveTouch: Settings>General>Accessibility>AssistiveTouch (set to ON) -
Well I read a sollution to my problem but I can't locate the lead to the sollutions for this 'not responding' occuring status of my program. And I connot remember any of them cause I hardly read the options to solve my problem.
One suggestion was about FirFox saving documents of recovery or so and that certain documents should be deleted, but I don't know which ones. And this was only one of the suggestions to solve my program's problem.
Thank you for any lead.Even upgrading to FF 9.0.1 didn't fix it.
Another description to the problem is "not responding for about 10-30 secs while the webpage becomes blurry white or translucent and the mouse cursor just keeps turning around and around until everything comes back to normal".
My addons are AdBlock Plus, AutoPager, FEBE, Foxclocks, iMacros, NoScript, SelectionSK, Webmail Ad Blocker, Webmail Notifier, Web of Trust and Xmarks.
It didn't happen on FF 8.0.1 when I was still using that version.
I've also updated Adobe Flash Player stable release and even tried 11.2.202.183 Beta 4 (Non-IE) version.
Still no luck. :(
Maybe you are looking for
-
My iPhone 5s won't show up under devices, iTunes, or iMovie. Why?
I just set up my Mac Mini last night. It is not the newest one. But was brand new in a box. It has all updates to the newest operating system, exc. I plugged my iphone 5s into the Mac Mini to upload to iMovie to edit a video. But, my device wont show
-
Why is my apple id not showing when I try to download something?
whenever I try to download something to my iPad, it shows up with a different apple id and password. Granted, the ids are in the same house, but there are two different devices with different apple ids. the ipod has one and my ipad has the same apple
-
Wrong Reciever message interface name in SXMB_MONI in PI7.1
Hi All, Some of the interfaces that are getting executed in PI7.1 have wrong reciever message interface name in SXMB_MONI view. In SOAP Envelope 1.Reciever message interface name is getting populated in <SAP:Sender> tag and 2. Sender message interfa
-
This is probably a very basic issue but here it goes: I've been developing a web application in tomcat. Originally we were using the JWSDP 1.3 bundle. I decided to download tomcat 4.1.3 and tried to run the application. I keep getting "bad class erro
-
Is there a way to play a slide show from a CD of pictures (from someone else's camera) without loading them all onto iPhoto? Thanks.