WiFi Problems after standby

Hi,
I am having problems with the PB's WiFi connectivity after returning from standby. Even though it appears as connected (full signal) I have to turn the WiFi connection off and on to be able to browse.
Anyone else having this problem?
Thanks in advance.

Just to let you know that I have had a solution for the standby/resume probelm from another site.
FYI below.
However the WiFi Driver and SSL VPN stopping WiFi and WLAN conectivity is still an issue.
PAUL
Solution to Standby Resume error.......
net stop wzcsvc
sc config wzcsvc start= disabled
Another satisfied customer here! I updated a couple of days ago to SP3 on my WinXP Pro system. I had the exact same problem (wzcsvc crash after standby/hibernate) and solution. What I don't know is if WZC was previously running in my SP2 installation or not, though I have no wireless device installed in this computer and SP3 was one of the only variables to consider.
BUT... I DO have an Asus P5B Deluxe motherboard. Now, that alone isn't very interesting except they made two flavors of this board: one with a wireless adapter (Deluxe/WiFi) and one without (just Deluxe). I have the one "without" but if SP3 looked at the system and didn't make that distinction it's possible SP3 decided Wifi was present perhaps based on the BIOS (which is the same for the Wifi and non-Wifi version of the mobo, as I recall) and installed and/or enabled the WZC service!
This bug (in SP3 itself or specifically WZC for failing this way) would be worth noting and fixing because I suspect lots of PCs out there have WiFi capability in the BIOS but possibly not the actual WiFi hardware. I personally hope others I've seen posting about this issue in SP3 find THIS thread useful. I'm very glad to have standby/hibernation working again!
By the way, of all the svchost processes the one with WZC in it had 30 total services attached to it. I'm curious why this process is so "overloaded" (if that's an accurate description) versus the other svchot processes which each only have a few services or less attached to them? Also, when it would fail and restart that svchost process only a handful of them actually came back (less than half!) I'm curious why that is as well...

Similar Messages

Wifi problem after.4.3 update on xperia z

Hi all,
After updating my Xperia Z (C6603) to build number 10.4.1.B.0.101 I've been having connection issues with every Wi-Fi network.
I've checked the forum but I only found problems about people having Wi-Fi issues with their smartwatch, I do not own a smart watch this is just a general networking issues.
Here's the problem in detail:
When having no Wi-Fi switched on while booting the phone the phone will start without any issues, I will receive my 3G/4G signal and I can browse, e-mail, everything.
Once I switch on Wi-Fi it will start connecting to previously stored Wi-Fi access points but will not connect. Eventually it says that there was a problem with connecting, even though this will take several minutes.
I can go into the Wi-Fi settings, select a different Wi-Fi network (if it is in range) and press connect, however the settings app will freeze at that point and eventually I'll get a notification that the settings app has stopped working.
I have found a "work-around": I switch the Wi-Fi to on, power off the phone and power on again. Now the Wi-Fi connection immediately powers on without an issue once the phone has completely booted, it also will connect to the default Wi-Fi connection that is in range. A different issue appears however once I move out of Wi-Fi range, it will no longer pick up my 3G/4G signal. It is also impossible to switch off Wi-Fi or switch Wi-Fi network connections without rebooting the phone.
As I said before this happened to me after updating to version 10.4.1.B.0.101 after having it received through OTA update. I do not have root access on my phone either so this can't be it.
Is there anyone experiencing the same issues? Is this somehow related to the issues people are experiencing with their smart watch connections (as seen in this topic: http://talk.sonymobile.com/t5/Software-Updates/wifi-problem-after-4-3-update-on-xperia-z/td-p/490591...
If there's anyone who is experiencing the same issues, or has found a fix for this I'd gladly hear from you.
Regards,
Danny
Sony Xperia Z
Modelnumber: C6603
Android version: 4.3
Kernal version: 3.4.0-ge09aff8
Build number: 10.4.1.B.0.101

I faced the same problem. So what u did now to connect your 3g or 4g. Did u tried kitkat update? Its works or not?

LEAP WIFI problem after updated to 4.2.2

I've just upgraded my tablet to 4.2.2.
Now I can't connect to my company's network which uses password LEAP. Major problem for me.
Seems this is a common problem across a number of Android platforms.
Does anyone know how to resolve on the Tab Z (not rooted). ?

We are looking into this (see http://talk.sonymobile.com/t5/Xperia-Z-ZL-ZR/XPERIA-Z-LEAP-WIFI-problem-after-updated-to-4-2-2/m-p/3...) but at the moment i have no solution. This seems to be a general problem with Android 4.2.2 from what i've been able to find.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How to Fix the iPhone 4S Wifi Problems After 8.2

How to Fix the iPhone 4S Wifi Problems After 8 2 its grayed out

I suggest you describe the problem in more detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received. Telling us you've tried ""all the methods mentioned in the forums" does not help.

Ipad Wifi problem after 7.1.2 update

Hey there! I noticed a big problem after updating my Ipad Air (Wifi Only) to iOS 7.1.2
When I put the device on standby It disconnects from the Wifi network, so I don't receive any push notification. Then when I start using the iPad again, the device reconnects immediately to the Wifi.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

WiFi problem after upgrading to Windows 8.1 Lenovo R400 ThinkPad

I have this problem after updating to 8 to 8.1
Right after updating to 8 to 8.1, all of a sudden my wifi stops working. I used my philips external wifi usb stick and now I'm able to get the internet going.
However if I disconnect my philips usb I no longer get the internet because the built in wifi that came with the R400 ThinkPad no longer works. I went through the device manager and under properties it tells me, 'Device not working properly' however it is up to date.
Im Running Windows 8.1 64bit Laptop Lenovo R400 ThinkPad

Hi Matti,
Thank you for replying back!
I suggest you to reinstall the Windows 8.1, as all the windows driver will not update, if you have upgraded the Windows 8 to Windows 8.1.
Please download Windows 8.1 separately and reinstall the OS, I hope this may resolve the issue.
Note: I am not suggesting for clean installation, only reinstalling the same OS.
Do not update the drivers from ThinkVantage system update utility. I suggest you to uninstall the current drivers and download the drivers manually for Windows 8.1 and install it.
Below is the link to enter the downloads page and download updates accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
http://support.lenovo.com/en_US/downloads/default.page#
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

IPad 2 Wifi Problems after upgrading to iOS 6

I Updated my iPad 2 to ios6 then day iOS6 was released, ever since then i have been unable to connect to the wifi. I've reset the network setting and the wifi works for about 5 minutes until i go on any apple app ( itunes, app store, maps etc). I've reset the Network settings more than once, I've turned the HTTP proxy to auto, I've pressed Renew Lease, I've unplugged the wifi, and I've pressed Forget this network. Reluctantley i updated my ipod touch 4 gen to see if iOS 6 was the problem and I now have the exact same problem on my ipod touch. Someone Help!!

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Wifi problems after update airport configuration

Hello, i have a question about my wifi. After i installed airport configuration 6.1 my computer said there is no wifi hardware installed. Does anybody knows how to fix this?
Or to get back to 6.0 ?

Thank you.
The problem is that I used to have a wifi network that let me go on the internet from my iPad, iPhone and laptop. Two days ago, it disappeared: no access to the internet via wifi from anywhere but my desktop. The old wifi network isn't listed anywhere, on my desktop or other devices that detect wifi.
I access the internet via ethernet from my desktop, via virgin media.
What I want to do is get a home network up and running again. Originally, it was all automatic - I didn't have to know anything to get it working. Then I followed some nifty spec on the forum to slightly alter the address of the device, and my other devices, so that I could use my computer's wifi from my Kindle. For the next 9 months, no problems. Then I casually updated the airport utility and poof, the wifi network vanished. And I don't know how to get a DHCP ID or anything else, because I didn't have to do it originally. I just plugged in my computer and did what I was told to.
This sounds so pathetic. I'm sorry. Is there some way I can just start all over again?

Wifi problem after install 10.7.3

After update lion osx to 10.7.3, i have got many problem with wifi. The connection is impossible.
Any idea to solve this problem?

emchir wrote:
After update lion osx to 10.7.3, i have got many problem with wifi. The connection is impossible.
Any idea to solve this problem?
There are many threads in the OSX Lion section describing wifi problems with 10.7.3 in general. Personally, I am experiencing wifi drops when my iMac wakes up from sleep. The issues are not isolated on the MacBook Air, but seem to be affecting all Apple products running 10.7.3.
What problems exactly are you having?

WIFI problem after update 2.2

Like many users in this forum I also have problems with the wifi connection after updating to 2.2.
I have the first gen iphone, ever functioned without major problems, but after update 2.2. I found out that my iphone looses the wifi connection after some minutes of being turned off and turned on again. Sometimes the wifi is established but most of the times I have to go to the settings and there try to connect to wifi again and again.
Sometimes I get wifi connection after 2 attempts, most of the times it takes up to 8 tries to have wifi again. I restored my phone three times now, hoping this problem would be solved, but in vain.
I also called the Apple support-first I was told to delete the 2.2. software from my itunes folder and then to restore again and let itunes download 2.2 software again - no improvement! At my next call with the Apple-Iphone support, the agent told me that I should delete my router settings, restore the iphone software- no new strategy at all - and that the problem with the wifi after 2.2. is not a well known issue by Apple; I told the agent to google this topic to see that this is a very common problem concerning hundreds of even thousands of users after the update 2.2. At the end of the call I was offered to send the iphone for a repair, which in my opinion is the common solution for support centers if the don´t have any solutions left. I refused to send my iphone to a "useless" repair, because it´s so obvious that the problem is the 2.2. update! I encourage all of you to call the support-hotline and make pressure to get Apple to release a quick update to fix this annoying problem! Happy New Year to all of you!

Thanks for your advice; I´ve resetted the networks setting twice; a little improvement came with this (the wifi-connection now sometimes establishes faster); but still..after having turned on my phone after some minutes paused there´s only "edge" activated. Seems I´ll have to wait for update 2.3 ?

Xperia Z2 tablet wifi problems after lollipop

xperia Z2 tablet is itself getting off on wifi.this problem after update to lollipop.

Do you experience the same if you boot on safe mode
How to boot on safe mode.
http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008

Wifi problem after updating my phone to ios 7.1.1

Hello everyone ,
I seems to be having wifi problem on my Iphone 5s. Before I updated my iphone to IOS 7.1, the wireless works just fine and without any disconnection. But now since i updated my phone to 7.1, my phones keep getting disconnected or hardly could connect into it. Sometimes when i go into the wifi setting, it detect the wireless but it says "Unable to join the network". However I'm using the same wireless connection on my laptop in the same location where i stand and my laptop wifi connection work just fine and smooth. What could be the problem? I need a solution.
I've Tried to put it on Airplane mode and reset network settings but still unable to solve it out. Secondly i also tried to reset all setting and hold both home and power button. Nothing is solving this. I need a solution, help please society :')

I am having the same problem since updating to 7.1.1. I also would appreciate any help.
I have tried the airplane mode and reset network settings with no luck.
Thanks in advance for any solutions provided.

WiFi problem after upgrading to Windows 8.1

So I have this problem since November 2013 after updating to 8 to 8.1
Right after updating to 8 to 8.1, all of a sudden my wifi stops working. I used my old Belkin external wifi usb drive and now I'm able to get the internet going.
However if I disconnect my Belkin usb I no longer get the internet because the wifi adapter that came with the H520 Desktop no longer works. I went through the device manager and under properties it tells me, 'Device not working properly' however it is up to date.
Anybody else had this problem and had it fixed?
Solved!
Go to Solution.

hi dudameister,
Thanks for Posting!
Open Device Manager and uninstall the WLAN 802.11 driver
"Place a check on the Delete driver software for this device "
the hit on scan for Hardware Changes
Delete the driver again until it does not show you a check box for deleting driver software
then Restart the computer.
Now install this
Realtek 8188EE Wifi
Then try reconnecting again.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

WiFi problems after changing from WEP to WPA on Actiontec router

I need some help/advice--I've searched the forums but am not seeing my exact problem described so decided to describe it to see if the community can help me figure out what to do now. The situation is this: After recently learning about the insecurity of WEP "security" I decided to change the security settings on our Fios router (an Actiontec MI424WR, Rev C). I first tried to change the settings to WPA2, but then my husband's elderly Dell laptop could not connect, so I changed them to WPA. At first everything seemed fine--we could connect to the internet from our computers (my MacBook Pro, his Dell, and various devices--phones, kindle, iPad).
But we soon noticed some strange problems that I was never able to resolve:
I could never get either of two Airport Expresses to connect to the network, even after repeated tries (with hard resets in between)
Within an hour or two after rebooting the router, I was no longer able to connect wirelessly to a NAS device that is connected to the router via an ethernet cable--I could no longer even see it in the Mac finder. I could see it in Windows Explorer from the Dell but could not connect.
Similarly, I lost contact with a Sonos bridge unit that is also connected to the router via an ethernet cable. In this case the loss of contact was sporadic--various devices that connect over WiFi to the bridge could sometimes see it, sometimes not.
Resetting the router would temporarily restore wireless access to the devices hardwired to the router, but I would always lose the NAS device completely after an hour or two and the Sonos bridge sporadically. The computers and devices, however, had no problems connecting to the router itself and from there to the internet.
I finally gave up and returned the security to WEP, and now everything is fine: the Airport Expresses connect, the NAS remains available, and the connection to the Sonos bridge over WiFi is robust (the Sonosnet mesh, if anyone is wondering, was never affected).
I can't understand why switching to WPA caused such problems, but it clearly did, since switching back to WEP eliminated them completely. The simplest explanation is that there is some problem with the wifi portion of the rev C router that only becomes apparent in certain circumstances, though it seems weird that both wired peripherals and wireless airport expresses were affected.
Whatever the causes of the problem, now I'm back to wondering how to improve the security of my network. Should I:
See if I can convince Verizon to replace the modem with a newer version? We have had this one for more than 4 years, since we first got fios.
Just go ahead and purchase the most recent version of the Actiontec router (rev G)? It's only about $115--worth it to me if I can use WPA with it.
Buy our own wireless router, perhaps an Airport Extreme, and turn off the wireless on the Actiontec.
Thanks in advance for any help. This is driving me crazy, and I really don't like feeling as if the network is vulnerable, especially given how extensively we use it.
Becky

This doesn't sound too uncommon. I had similar issues in the past with some networks I've worked with that were resolved by moving the router actually to WPA2 or by updating the firmware. The ActionTec MI424WR Rev. F, G, and I require the use of WPA2 since they have Wireless N radios in them so WPA wouldn't be of much use. My old Linksys WRT54GX also had similar issues, but that was a result of the Wireless Radio dying along with a mix of newer hardware not playing nice with the old, no-longer-supported firmware. I retired that router, only to bring it back into service as a Wired router at a friend's home (shutting off Wireless and setting up another as an AP) which replaced an old BEFSX41 which didn't have enough power to handle his Cable connection.
Besides a few software bugs at play somewhere, there isn't much that could cause the wireless to slowly stop working like that. I would suggest moving back to WPA2. For the older Dell laptop if it's running Windows XP, make sure at least Service Pack 3 is installed if it hasn't been getting updated. Also, check for updated drivers for the Wireless card since they may be needed as well. A bit of searching on the Wireless card should also indicate whether or not it supports WPA2 encryption. Anything from the mid-2000s should support it.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Wifi problem after connecting to wpa2 enterprise

hi all.
I have iphone 3gs with me. It has doing great on all the wifi connection before. I can connect to my home wpa2 wifi and office hidden wpa2 wifi with no problem. Then, I tried to join my office enterprise wifi with wpa2 enterprise. It was successfull. However, just after that, i can't get connected back to my office hidden wpa2 wifi. it just like deny the connection. I reset the network connection, forget network still fail. Even i disable the wpa2 security but failed also. Anyway, i still able to connect to my home wifi and office enterprise wifi.
please help as. I can't say the hardwar problem as it can get connected at my home network. sight

anybody care to help me please?

WiFi Problems after standby

Similar Messages

Maybe you are looking for