Wifi problems ipad 3rd and Time capsule 4th generation since iOS 8 upgrade

Does anyone have the same issue?... I have wifi problems betwen ipad 3rd generation and Time capsule 4th generation since iOS 8 upgrade. Solution: I must switch on/off airplane mode in order to start using Wifi...
I have the latest updates for all equipment and I don't have similar problems with my iphone, macbook or mini-ipad.

It works ... removing and reestablish the wifi connection works. Thanks ...

Similar Messages

  • Extending wifi with airport express and time capsule

    Hi All
    I'm new to macs and moving over in a big way!
    I started with a time capsule and all was fine apart from the coverage in the house.
    It seemed easy to extend the wifi so purchased an AE 802.11n and extended the network.
    It does extend and I can connect to the internet but the network is now really really slow and the time capsule backup wont work.
    connection is :
    Ethernet modem - Airport express ( as its close to my audio equipment ) - extended WIFI conection via 802.11n.
    Any suggestions? why is it so slow?
    Im at 7.3.1 firmware on both AE and time capsule and the Macbook pro is at 10.5.3.
    Any suggestions?

    I've managed to change the 5gHz of ther Airport Express that's extending the network.
    As mentioned, main AE is on channel 48, and I now have the 2nd AE on channel 36 - which means my TV can now see the network. Also tested speed via my mavbook air on the same 5gHz network as it all seems OK (A while ago I spotted my Time Capsule was on the same channel 48 as main AE and throughput was abysmal! Bad enough to make me reset the TC to factory defaults and setup again - which is when the TC got channel 120).
    Anyway, the fix... I changed the 2nd AE to create a wireless network (instead of extend), and manually set the channel to 36. I then set it back to extend, and it seems to have kept channel 36.

  • Problems with FaceTime and Time Capsule?

    I was wondering if anyone who uses Time Capsule for their WiFi router has ever experienced any problems with FaceTime?  I use that as my router out of state, and when placing calls to my Mom, she has a LinkSys router.  Every time I go to try a FaceTime call, the sound is spotty, and then the call eventually craps out.  However, Skype works just fine.  During a recent visit to her home, I tried a FaceTime call and it worked just fine, which led me to wonder if it had anything to do with us having separate routers, or if it's a strength of the Internet connection signal?  Was just curious if anyone else had similar issues?  Thank you in advance!

    Sounds like a Internet connection problem to me, probably too slow.
    You can try identifing the more problematic router/Internet connection by FaceTime calling a iPhone on a 3rd Wi-Fi network. If it works from your location but not your mom's, then your mom's router or Internet connection is the problem. You can further narrow it down by switching routers after finding the location that has the problem.
    You can check the speed of the Internet connect and make sure the wireless router is updated and configured correctly.
    WTH.

  • Hi can I use Time Capsule 4th generation as a back up at the same time between my iMac and HP PC

    HI Just bought a 4th generation Time Capsule and after a bit of trouble, I was able to do the following...
    1. Connect TC to my modem via ethernet cable
    2. Set up my first time Machine from my iMac to Time Capsule
    3. Set up my HP PC via ethernet cable to Time Capsule
    4. Set up HP Printer Scanner to USB port in Time Capsule, can now print from my PC and iMac using the same printer.
    Here is the question...
    Can I use Time Capsule (2TB version, not that this should matter, I think) as an external back up for my HP PC, running Windows 7?
    I asked this question at Apple Store and they said YES, now I have my doubts as I cannot see Time Capsule as an external drive when I check my PC and computer part there, can see my C drive, D drive (internal backup drive in my PC), E drive (DVD drive) and that is it.
    Installed AirPort utility for Windows, have version 5.5 something. I can see TIme Capsule using this at my PC but can I somehow save my HardDrive to Time Capsule, even manually?
    Or is the problem that as I started Time Capsule with Time Machine Backup first, it has formatted Time Capsule to support only Apple version, and this is why I cannot see Time Capsule as an external harddrive?
    Any help would be appreciated!
    I have already an external HD for my Windows PC, just thought this way I could potentially have all the data in one place and also able to use 1 printer...
    Many Thanks

    Remember Apple Names are not fully SMB compatible..
    Reset the TC and do the setup with all SMB naming.. ie.. short, no spaces, pure alphanumeric.
    That means TC name eg TC
    Wireless name (different for 5ghz) eg TC24ghz and TC5ghz
    And hard disk share name.. eg Data
    Make sure all passwords also match that convention.. but you can use more characters.. up to 20 or more if you are paranoid. Pure alphanumeric though.
    In the file sharing area. set the right workgroup. And it makes life easier turning on the guest account to read and write.
    Then in windows explorer simply type
    \\TCname or \\TCIPaddress .. obviously you change the names with the actual name or IP.

  • IPAD 2 and Time capsule

    hi, can some one tell me if i have time capsule and an iPad2 and i have some movies on my time capsule would i be able to play them directly to my iPad?
    and qustion 2 can i use the time capusle insted of a Airport device?

    so if i buy the IPad2 and i want to see movies from my computer without transfering it to my ipad2
    how do i do it?
    the thing is that i want to be able to sit arround my house and use my ipad to see the files that is in my computer or hard-drive.
    do you maybe have a solution?

  • WIFI problem when linking two Time Capsule

    Hello community,
    I hope you can help me out here so that I will finally know if I'm doing something wrong or it's just a bug. I own two Time Capsule, an old first 500GB model and a newer 1TB simultaneous double band model.
    I set up my network with the 1TB model and I chose to link all the 802.11n devices I own (MacBook, iMac, 500GB Time Capsule etc) over the 5GHz network and all the others such iPhone, PS3, printer over the 2.4GHz network.
    The kernel is that if I try to connect the 500GB TC model (in order to extend my network and yes, the 1TB model is allowed to be extended) using the 5GHz network I experience problems: green light followed by the amber light...the HDD boots up and the TC connect again but the problem persist...it just keeps connecting/disconnecting.
    On the other hand, If I link the 500GB TC over the 2,4GHz network it just works fine.
    Believe me, I tried resetting many times but nothing happened...I had to switch back to 2,4GHz network in order for it to work properly.
    How can it be? I know that the first TC model can work over 5GHz just fine....(I remember that you could choose which frequency you could use).....so I'm a little astonished...¬¬
    Am I missing something or is it a bug?
    Greetings from Spain

    Did you assign a separate name to the 5 GHz network on our AirPort Extreme
    Hard Drive > Applications > Utilities > AirPort Utility
    Click Manual Setup
    Click the Wireless tab below the row of icons
    Make sure there is a check mark next to "Allow this network to be extended"
    Click the Wireless Options tab
    Assign a separate name for the 5 GHz network
    Then, on the Time Capsule
    Open AirPort Utility, click Manual Setup
    Wireless Mode would be "Extend a wireless network"
    Wireless Network Name would be the exact name of the 5 GHz network that you setup
    Security = Same as Airport Extreme
    Password = Same as AirPort Extreme
    I confirmed that this does work. Does this help you there?

  • Replacing macbook with iPad 3 and time capsule

    ive been looking at an ipad for some time and am wondering if i could replace my macbook with it and a timecapsule. i need to be able to sync my iphone etc or will i still need the macbook? i have searched and found a thread from march last year but that refered to the ipad2, it said it couldnt be done but im wondering if this has changed on ipad 3.
    paul

    You cannot backup an iPad or an iPhone to a Time Capsule because there is no Time Machine for either one. You can only back them up to iCloud provided you have a wireless connection.
    And, an iPad is not a computer. It cannot do everything the computer can do. It's intended to supplement the computer not replace it.

  • HT1218 iPhone 4s connectivity issues with Time Capsule 4th generation

    Out of nowhere, my iPhone 4s all of a sudden quit connecting to my Time Capsule's wifi. Have never had any problems until yesterday. Have read multiple forums that say reset your iphone, turn wifi off and then on, forget and then resgn into network, change the channels on wifi from automatic to different channels. Changing the channels worked for about an hour and then I was back to square one. Everything else failed. iMac and MacBook connect without any problems or delays at all. PLEASE HELP?!?!

    Your TC replaced what?
    Are you extending on 2.4ghz?
    There is a chance the TC is lower than the router it replaced.. you may need to get the second Express closer to get a good signal so it can extend properly.. the idea is to have the express in about the centre of signal strength not distance.. use your laptop if you have one with a wireless analysis program like istumbler to find the signal at the TC from say 3M.. at the express 1 and at the express 2. Work out if the signal is too low and move them as appropiate.
    Or.. think the arrangement and use something like EOP adapters direct to your office.. they can work hugely better than wireless. (or just as badly.. depending on the house wiring).

  • HT201250 Do you need to use a new external hard drive or an erased one to back up once you upgrade to OSX Lion?  My time capsule fails ever since I upgraded the new program to my old mac.

    I have not been able to back up in Time capsule since I upgraded my mac to MAC OSX Lion 10.7.5.
    Do I need a new external drive or an erased drive to get it to work with the lion software?

    Either new or an erased drive is fine, as long as it is formated Mac OS Extended (Journaled).
    By the way: I find that Carbon Copy Cloner is a much simpler and efficient "clone"(backup) solution, especially if you're using an external drive.
    http://www.bombich.com/

  • Mountain lion and time capsule. Extremely slow after upgrade...

    After upgrading to the new system, I was trying to copy my iphoto library to my timecapsule, but at this rate, it will be completed within 20 hours... And I´m only transferring 11 gb... I also checked my connection speed to the timecapsule and it´s at 450mb... So, why is it going to take 20 hours??? This is an issue that needs to be adressed... I have the brand new Timecapsule. It´s also not doing a backup while I´m transferring...
    Hoping this will be resolved immedately...

    I noticed that Time Machine erased all of my previous backups and started fresh.  I woudl be willing to bet that the sluggishness you expereinced was because Time Machine was making a full backup.  It proably became more quick once it finished this since it could perform incremental backups thereafter.

  • Time Capsule 1st Generation vs 4th Generation

    Is there a compelling reason why I should upgrade from a Time Capsule (1st Generation) to the latest when my current TC is functioning flawlessly?  I've got a house full of Apple Devices;
    - Time Capsule 802.11n (1st Generation)
    - AirPort Express 802.11n
    - iPod touch (1st Generation)
    - 2x iPhone 4
    - iPad
    - iPad 2
    - Apple TV 2
    - MacBook Pro 13" (Mid 2009)
    - iMac 27" (Mid 2010)
    - MacBook Air 13" (Mid 2011)
    Are there significant performance improvements with the Time Capsule (4th Generation) and/or Airport Extreme (5th Generation) over the Time Capsule (1st Generation?
    Thanks in advance for the advice/recommendations!
    Brian

    The major difference between the two versions is that Generation 2 and higher products allow simultaneous dual band wireless operation.
    Your Time Capsule will produce either a 5 GHz or 2.4 GHz network, but not both simultaneously. Since you have iPhones connecting to the network, you are using the 2.4 GHz band.
    Most of your newer devices are capable of connecting at the much faster 5 GHz speeds, but if you set your current Time Capsule up to operate at 5 GHz, the iPhones and iPod will not be able to connect.
    A newer version Time Capsule produces both a 2.4 GHz and 5 GHz signal simultaneously, so faster devices would connect to the 5 GHz band and slower devices connect to the 2.4 GHz band.
    That being said, there is also something to be said for leaving well enough alone. Your call.

  • TS3972 How can I access the files(movies,music,etc) in my Apple Time Capsule(4th Gen) from my Apple TV(3rd Gen). This is very frustrating Apple has not provided a basic feature, and me buying the Time Capsule and Apple TV is an complete waste of bucks.

    I have an Apple TV (3rd Gen) and Apple Time Capsule (4th Gen). How can I access Movies and Music stored in the Time Capsule from Apple TV. This is very  n't give frustrating that Apple doesn't give their customers with an straight forward access to their customers in between their own products. Iam repenting that buying these products is completely waste of bucks. Appreciate your help...

    Welcome to Apple Support Communities
    The Time Capsule is clearly announced as a router with a hard drive to make backups, not to store anything and share it with your Apple TV.
    To access to movies and music from the Time Capsule, note that the Apple TV can only access to them if they are stored in your iTunes library, so you will have to put your movies and music into iTunes to access to them, and then, put your iTunes library on the Time Capsule in order to access to your data from there

  • Need help setting up WiFi - Xfinity with Network Switch, Time Capsule, Airport Express and Apple TV

    Hello - I recently got Comcast Xfinity service.  We had switched from a different service.  Our wifi service was never great, but prior to Xfinity, it worked decently.  But now that we have Xfinity, our wifi is much worse and very unreliable.  I am seeking advice on how to setup my various Apple wifi devices in my home.   I have attached a diagram that illustrates what I am dealing with.  We have a large old house with stone walls.  Comcast does not support this issue. 
    To explain the attached diagram, we have a total of 4 levels in our house - an unfinished basement, 1st floor, 2nd floor, and 3rd floor.  The Xfinity router is in the basement and it is connected to a NetGear 10/100 network switch.  I already have ethernet cables running from the network switch in the basement to various locations throughout the house.  So I have ethernet connected to my time capsule and ethernet connected to each of my 3 Airport express devices.  The dark lines running from the network switch to the various devices represents ethernet cable.
    The immediate problem that we are having is that we are unable to connect to our wifi networks.  The networks show on my mac laptop and my iPhone, for example, but I am unable to connect.  I know that I am inputting the correct password, but most of the time, we cannot get in.  Sometimes we can..... Very frustrating!  Also, due to the fact that I setup what I have over several years, I have multiple network names.  I once tried to fix that issue, but was unable to tackle it due to my lack of understanding.
    Here is what I am looking to accomplish:
    1. Seamless wifi access throughout our house.
    2. One name for our wifi network.  Right now we have multiple names for multiple networks.  Just want to simplify and have only one network.  (I guess that an additional "guest network" would be ok, but not absolutely necessary.
    Also, if you think I should disable the Xfinity wifi, and just rely on my mac wifi devices, I am perfectly fine with this.  Just tell me how to do so.
    I have no idea how where to start or how to set this up.  I imagine that I would need to disconnect everything and reset and start from scratch?  Can someone tell me what I should do?  Even general advice would be helpful, but the more specific, the better, given my limited understanding.  Any help or advice would be greatly appreciated.
    Thanks in advance!

    Your photo link is not working. Click on the camera icon to load an image. (Shorten the name of the file to something like WifiNetwork.jpg)
    Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Time capsule 4th gen firmware 7.6.1 and Windows 7 Home Premium

    Hi I have a Time capsule 4th gen firmware 7.6.1 and Windows 7 Home Premium and every time I try to copy a large file from the TC to my Windows 7 laptop the TC crashes.  The time capsule disk dissapears from the network and the wireless is still on but with limited connectivity for everyone including the macs connected to the same network.  On the contrary, I can copy any files to the TC.  No problem.  I've tried all the suggestions.  Lmcompatibilitylevel 1, disable 128-bit encryption, and disabled windows search.  No luck!  Any other suggestions?

    My previous reply: red herring. The problem didn't occur again right away, but eventually it did. Completely repeatable: start copying a 100GB file off the Time Capsue to the ThinkPad, and the entire wi-fi network goes down; nothing to do but pull the plug on the TC and restart it.
    I have tried several different versions of the Intel wi-fi driver under Windows 7 and 8 -- same problem in all cases.
    At least one other thread describing these same symptoms points to the firmware as the culprit (https://discussions.apple.com/thread/3582780?start=0&tstart=0). I have just downgraded the TC firmware from 7.6.1 to 7.5.2 as suggested; so far so good.

  • How do I transfer my pictures and videos from my iPhone and IPad on the time capsule?

    How do I transfer my pictures and videos from my Iphone and IPad onto my time capsule?

    You cannot use Apple TV.. again the TC is not a media device and has no media extensions.
    You can store video files on the TC.. but the ATV must work either via airplay so you run the video on an ipad for instance and send the screen view to the apple tv or you have itunes running on a computer.
    BTW a WD live TV can play video files from a TC.. because it is a true media player.. the Apple TV is not a media player.. it is a streamer.

Maybe you are looking for

  • How do I connect a 2013 Macbook Pro Retina to an Epson Power Lite 61p LCD Projector?

    I am trying to attach an Epson PowerLite 61p LCD Projector to my 2013 Macbook Pro Retina, but I cannot find which type of adapter I need. I would assume whichever adapter is required it must connect via thunderbolt. However, I do not know if the requ

  • SO_SPLIT_FILE_AND_PATH

    Hi Experts, The FM  SO_SPLIT_FILE_AND_PATH is used to separate a file and directory. That means if i give full path of a file ,it will separate the directory name and file name in to two return variables.But it is not working in ECC6.0.If i run in SE

  • List purchased in app store not appear

    List purchased on my iphone 4s did not appear. How do I get them back in order to download the application I have ever bought

  • ACS with patch L 6 and Name column issue

    Has anyone experienced the following? My customer has used the migrate tool to migrate users from the ACS 4.2 to 5.3. He has also applied the patch level 6. However under the Identity Groups listed names (the Name column)- from some - to half of the

  • Graph range problem with tab control

    Hello. I am using LabVIEW 8.2.1 I have five XY-graphs in a tab control, with five tabs. One graph in each tab. When running, theese graphs is constantly written to, but the user is only allowed to watch one at a time. The program also contain a maxim