Wifi profiles SCCM 2012 R2 and Windows Intune

Hi All,
A quick question regarding SCCM 2012 R2 and the new Wifi Profiles feature...
Can anyone confirm if you need windows Intune combined with SCCM 2012 R2 to be able to deploy WIFI profiles to users devices i.e Windows 8.1, IOS and Android platforms? Microsoft documentation is not clear on this subject.
Any help would be much appreciated.
Regards PowerShell90

It not as straight forward as one would hope. I am running the latest version of SCCM 2012 R2 CU2 connected to my Windows Intune subscription. There are a lot of hickups. One is that the direct of management needs to be all or nothing. In other words you
either need to use Windows Intune solely to manage your devices or SCCM 2012 R2 (via connector). If the later then you must do everything from in SCCM 2012 R2. You cannot hybrid manage your devices as this will screw things up.
Android for some reason is left out on a lot of features. I would think that MS Devs would work hard on the market share that being Android, not iOS. Any way, accord to some official MS articles Android is supported, but others claim that not all features
are, these being the important ones like Email and Wi-Fi Profiles. They simply do not work.
I think MS is heading in the right direction but there is a lot of work that needs to be done before this is a competitive product. I could care less if connects to my SCCM 2012 R2 server or not. Here are few things that I sent o a MS Support Rep today that
need to be address.
1. Better response time when updating devices after enrollment (e.g. Name change).
2. The ability to locked down uninstalling Windows Intune from device.<o:p></o:p>
3. The ability to locked down certain features in the Windows Intune app on device (e.g. User can reset device with Windows Intune app, rename, etc...).<o:p></o:p>
4. Ability to rename device in either Windows Intune Admin Portal and/or SCCM 2-12 R2.<o:p></o:p>

Similar Messages

Windows 8.1 mobile device management using integrated environment of SCCM 2012 R2 and Windows intune

Can we avoid the dependency on the Symantec certificate for enabling windows phone enrollment under Administration->Cloud services -> Windows InTune subscriptions - Windows Phones. My environment will have only windows 8.1 phones.
Regards
Leela

See http://status.manage.microsoft.com/StatusPage/ServiceDashboard.
Engineers are investigating a service issue impacting access to portal via mobile devices.
(Started on 12/30/2014 8:00:00 AM UTC)
1/8/2015 11:42:49 PM (UTC)
Current Status: Engineers are continuing to troubleshoot potential issues related to Active Directory Federation Services (ADFS). Engineers have gathered additional traces and logging data for deeper analysis. User Experience: Affected users with Windows Phone,
iOS, or Android devices are unable to access their company portal and receive repeated prompts to enter credentials. If incorrect credentials are entered, users will receive an error stating that they have entered a bad password. Customer Impact: Engineers
have received reports that some customers are experiencing this issue. A subset of users are affected by this event. Other users remain unaffected. Incident Start Time: Tuesday, December 30, 2014, at 8:00 AM UTC Next Update by: Tuesday, January 13, 2015, at
12:00 AM UTC
Torsten Meringer | http://www.mssccmfaq.de

SCCM 2012 R2 and windows 7 folder redirection

Hello gurus
I want to ask a quick question. Does anyone know if I can do folder redirection, offline folders, roaming profiles and network drive on Windows 7 using SCCM 2012 R2?
Thanks in advance.
Regards,

The setting does not apply to Windows 7. I tested and DCMagent just thought it is Non-applicable.
Juke Chou
TechNet Community Support

SCCM 2012 R2 and Windows 8.1

Hi,
I have installed SCCM 2012 R2. SCCM client deployed on 10 PCs and I can explore Hardware resources on all PCs except 1 PC which is 8.1
so my question now does SCCM 2012 R2 supports 8.1?
Thanks,
Kareem Behery

Hi,
Yes, ConfigMgr 2012 R2 supports Windows 8.1. Check the Windows 8.1 computer to make sure that the SCCM client is operational and sends in Inventory to the Site server. Inventpryagent.log file on the computer is a good place to start.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Email profile support for Samsung Android (KNOX) devices in integrated environment of SCCM 2012 R2 and Microsoft Intune

Hi,
I could see that lot of TechNet articles are being updated recently with the information on Samsung Knox.
Tried to check the email profile configurations in the SCCM console, could not find Android platform in the supported platforms.
I could see this option available when I login to the admin portal of Intune. Can any one confirm if the extension for enabling email profile support for Samsung Kiosk devices id released or planned to be released.
Regards
Leela

Configuring email profiles on Andriod devices is not yet supported via ConfigMgr integrated with Intune, see also:
https://technet.microsoft.com/en-us/library/dn554226.aspx
It probably will be in the future, but there are no dates available yet.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Microsoft Intune and SCCM 2012 R2 Integration - Windows 7 clients.

Hi All,
This is our scenario I am trying to find out more about Intune integration with SCCM 2012 R2 and what solution is best for us.
We have a SCCM 2012 R2 instance up and running which services/monitors machines on our internal network. All of these machines are Windows 7 OS. We have laptops that travel frequently and need for these to report back to our SCCM server whilst connected
via internet connections. Also we have multiple "off domain" machines (ie workgroup machines) which we also need to report back to the same SCCM server.
I have read a lot about Intune integration with SCCM but it appears to be targetted at MDM not around PC management.
What would be the best way for us to move forward?
Thanks in advance.

Just see my reply in the ConfigMgr forums.
Torsten Meringer | http://www.mssccmfaq.de

Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine, tried solutions from other threads with no luck, just thought i'd see if anyone else had any ideas, thanks.

Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine so the problem seems confined to Windows 7. I've tried solutions from other threads -
Making sure everything is allowed through firewall
Rebooting phone/laptop/router
Disabling ipv6
Disabling all networks except the one curently on
Re-installing iTunes
Restoring iPhone
No luck with any of those unfortunately so i just thought i'd see if anyone else is still without wifi sync after trying those as well and if you ever found a fix, thanks.

I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

Deploy Java Updates using SCCM 2012 SP1 and SCUP 2011

What is the best way to deploy Java updates using sccm 2012 SP1 and SCUP 2011?

I didn´t find Kent´s blog useful when talking about Java. I can deploy Adobe products fine, but I have to import Java manually because not having Shavlik certificate. So with that said, I have the fallowing problem;
I have full offline installer unpacked, .msi file and Data1.cab. When I´m importing these binaries to SCUP, I only can point to .msi. Doing that, installation fails in client side fails because of lack of data1.cab fine, which is the main file.
Should I use some other downloaded files of Java? I couldn´t find any Java-update-file only type of files to download.

Just FYI, Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide in Word format in the TechNet Gallery

The Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide is now available for download in Word format in the TechNet Gallery at
http://bit.ly/1pYZT3F
Thanks -
James McIllece

hello again,
meanwhile I was lucky to find this article about Idenity Mapping in TechNet in the Storage Team Blog:
http://blogs.technet.com/b/filecab/archive/2012/10/09/nfs-identity-mapping-in-windows-server-2012.aspx
Likely to be overseen at the end of one paragraph it says:
"Client for NFS does not support NFS V4.1 in Windows 8 or Windows Server 2012"
Question : Is this an official statement and is it still valid with most recent
Windows Server 2012 R2 that NFS client does NOT support NFSv4.x ??
thanks - Rainer

Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012. Everything installs without error. I have acquired a certificate for SCUP signing from the internal Enterprise CA. I have
verified the signing certificate has a 1024 bit key. I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer. When I attempt to publish a Flash update with Full content I receive the following
error:
2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
I have redone the certificates three times with no luck. I can import metadata, but any attempt to download content results in the verification error.
TIA

Hi Joyce,
This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048. Thank you for being my second set of eyes.
I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect? In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic."
No Flash updates in the ConfigMgr console are marked as downloaded. I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works.
Comments and suggestions welcome.

Windows 8.1 Update (with WinPE 5.1) ADK + SCCM 2012 R2 and WinXP

Hello,
I see new ADK version (8.1 Update) is released
http://www.microsoft.com/en-US/download/confirmation.aspx?id=39982
It contains WinPE 5.1 and new USMT (which version?), does it support migration from WinXP to Win7?
Previously I used USMT5 (instead of 6.3) and modified WinPE 5.0 with bootsect.exe from WinPE 4.0 (from ADK 8.0) on SCCM 2012 R2 CU3.
And can I use ADK 8.1 Update with SCCM 2012 R2?

He does answer your question about the USMT version.
The rest still applies in terms of XP support. See below.
http://blogs.technet.com/b/mniehaus/archive/2014/01/09/migrating-from-windows-xp-to-windows-8-1-using-mdt-2013.aspx
Yes, ConfigMgr 2012 R2 is supported.
http://blogs.technet.com/b/configmgrteam/archive/2014/04/03/understanding-the-adk-for-windows-8-1-update-and-configmgr-osd.aspx
Daniel Ratliff | http://www.PotentEngineer.com
in the article I found:
Windows PE version 5.1 is not needed for Configuration Manager and can actually be problematic if you try to use it. Windows PE 5.0 can continue to be used to deploy Windows 8.1 Update. There is a documented process to upgrade Windows PE to version 5.1,
but this should be considered incompatible with Configuration Manager at this time.
So for a new installation of SCCM 2012 R2 I can install ADK 8.1 update because in contains WinPE 5.0 and option to update to 5.1. And unclear about XP, it seems XP is not supported again.
Also fourth release was in September 2014, but article was posted in April 2014.

Deploy UDI Windows 10 with SCCM 2012 R2 and MDT 2013 Update 1

Hi,
Trying use "User-Driven Installation" with
SCCM 2012
R2 CU4 and MDT
2013 Update 1 for deploy Windows
10.
Created MDT Task Sequences with
template "Client Task sequence"
and Deployment Method "User-Driven Installation".
When I try to deploy I have error like:
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Part smsts.log
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Expand a string: WinPEandFullOS TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: smsswd.exe /run: cscript "%deployroot%\scripts\ztierrormsg.wsf" TSManager 22.04.2015 11:36:57 1160 (0x0488)
[ smsswd.exe ] InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
PackageID = '' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
BaseVar = '', ContinueOnError='' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
SwdAction = '0001' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Set command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Working dir 'not set' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Executing command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft (R) Windows Script Host Version 5.12 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Copyright (C) Microsoft Corporation. All rights reserved. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft Deployment Toolkit version: 6.3.8216.1000 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the action: Error in the task sequence.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionRetCode=5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 22.04.2015 11:36:57 1160 (0x0488)
Clear local default environment TSManager 22.04.2015 11:36:57 1160 (0x0488)
Let the parent group (Gather Logs and StateStore on Failure) decides whether to continue execution TSManager 22.04.2015 11:36:57 1160 (0x0488)
The execution of the group (Gather Logs and StateStore on Failure) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: X:\WINDOWS\system32\cmd.exe /k TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
The command completed successfully. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
Successfully launched command shell. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)

MDT Updates for Windows 10 Technical Preview Build 10041
Если Вам помог чей-либо ответ, пожалуйста, не забывайте жать на кнопку "Предложить как ответ" или "Пометить как ответ".
http://zalozny.com.ua

SCCM 2012 R2 and client content sharing on Windows 7 Pro

Is it possible to use "Allow clients to share content with other clients on the same subnet" option on Windows 7 Pro clients? It's bit confusing because based on documentation, branch cache is only available on Windows 7 Enterprise and
Ultimate editions. Why does Windows 7 Pro have branch cache service when it's not usable?

Hi,
Is Branch Cache working with Windows 7 Professional?
No, it will not work with Windows 7 professional . Only Windows® 7 Enterprise and Windows® 7 Ultimate will support it.
We can confirm that form the official link below:
Client computer. A computer at a branch office that is running either Windows 7 Enterprise or Windows 7 Ultimate and that has BranchCache enabled.
BranchCache Overview
http://technet.microsoft.com/en-us/library/ee307962(WS.10).aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Software Update Point doesn't show Win 2012 R2 and Windows 8.1 updates

I started deploying Windows 2012 R2 Datacenter servers and some Windows 8.1 workstations. I wanted to make sure that my Software Update Point was downloading updates available to those OS's and after going in to Administration -> Overview -> Site Configuration
-> Sites -> Configure Site Components -> Software Update Point, I notice that those OS's weren't available to select.
I then did some searches on the web and thought my problem was two fold:
1 - I was using SCCM 2012 SP1.
2 - My SCCM 2012 Software Update Point was on a Win 2008 R2 server
So the first thing I did was upgrade from SCCM 2012 SP1 to SCCM 2012 R2. I then created a Windows 2012 R2 Datacenter server and installed WSUS on it. I then added the server as a Site System Server, added the Software Update Point to it and configured it.
Unfortunately, this still didn't help me as you can see from the screen shots below:
What am I doing wrong and what needs to be done to have all the updated Operating Systems and Microsoft Software added to my Product list?
Thanks... Frank

To follow on to narcoticoo's statement, have you actually initiated a catalog sync from within the ConfigMgr console yet? If so, has it completed successfully (you can check the moniotring workspace or you can watch the wsyncmgr.log).
Jason | http://blog.configmgrftw.com
Jason...
I just ran a Synchronize Software Updates from ConfigMgr Console. I then went Monitoring -> Software Update Point Sync Status. It's showing my new WSUS server ( 2012 R2 ) but it's not showing any updates are being sync'd through it. See this screen shot:
I then went to the wsyncmgr.log file on my site server which is the OLD WSUS server ( Win 2008 R2 ) and say this:
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=PREP-SCCM12.<domain.org> SITE=STA PID=5224 TID=4028 GMTDATE=Wed Feb 26 19:00:40.236 2014 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found on site STA. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.236+300><thread=4028 (0xFBC)>
Sync failed. Will retry in 60 minutes $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.279+300><thread=4028 (0xFBC)>
Setting sync alert to active state on site STA $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.313+300><thread=4028 (0xFBC)>
Sync time: 0d00h00m00s $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.360+300><thread=4028 (0xFBC)>
Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\Win 7 Updates up to Aug 2012\0048da55-f46f-4452-b4c1-37c0f295333b\IE9-langpack-Windows7-x86-xho.exe, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.042+300><thread=4028 (0xFBC)>
Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\Win 7 Updates up to Aug 2012, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.067+300><thread=4028 (0xFBC)>
Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\Win2k8 Updates Until Aug 2012\000f8a0a-825c-457b-a15b-57ade145a09b\windows6.0-kb2653956-x64.cab, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.119+300><thread=4028 (0xFBC)>
Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\Win2k8 Updates Until Aug 2012, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.144+300><thread=4028 (0xFBC)>
Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\Win 7 Updates for Sept 2012\10f3ec1c-f096-4a82-ae41-440ba5328467\Windows6.1-RTM-Client-NEUTRAL-X86.EXE, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.173+300><thread=4028 (0xFBC)>
Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\Win 7 Updates for Sept 2012, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.199+300><thread=4028 (0xFBC)>
Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\XP Updates Until Sept 30\17165524-99fa-49f7-91e6-457d43d4a48e\Windows-KB890830-V4.12.exe, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.228+300><thread=4028 (0xFBC)>
Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\XP Updates Until Sept 30, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.254+300><thread=4028 (0xFBC)>
It appears to me that when doing a Sync, it's still trying to use my OLD WSUS server instead of my new one. I removed the Software Update Point from the OLD WSUS server and uninstalled WSUS from it. I'm not sure why it's still trying to sync from the old
server rather than the new one. Any ideas?
Thanks... Frank

Slow logons on windows 2012 server and windows 7 sp 1 devivce

Hello everybody,
I've a windows user reporting slow logons on one of our clients.
The domain is a 2012 domain and the device with the issue is a windows 7 sp1.
The winlogon message event ID 6005 appears (winlogon taking too long to handle notification request)
Also NETLOGON message event id 5719 saying can not secure channel with the DC, because there're no one available).
Profile is not set to roaming.
The system logs are uploaded to this link:
https://onedrive.live.com/redir?resid=2CDBBADCC474A82C!241&authkey=!AM99cXm2AaNp8Wg&ithint=folder%2czip
Resetting the password of the computer object is succesfull but I can not be resetting the password now and then.
The GP setting for process login scripts synchronously is not configured.
The GP setting that makes the computer wait for the network set to 0 then causes a temp profile to be loaded.
Please help me I don't know what else to do.
Regards

Hello Britt,
Thanks a lot for answering.
Looking at the DNS server found no reverse lookup zone configured. I didn't setup the server so I didn't know that. I did a search and AD seems to have no problem with that.
Here's an ipconfig from the SERVER:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : Server
   Primary Dns Suffix . . . . . . . : NEPedi.local
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : NEPedi.local
Ethernet adapter NIC1:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2
   Physical Address. . . . . . . . . : F0-1F-AF-E4-C4-FF
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::586e:e054:8cb2:fd10%13(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.2.10(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.2.1
   DHCPv6 IAID . . . . . . . . . . . : 384835503
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-95-A4-94-F0-1F-AF-E4-C5-00
   DNS Servers . . . . . . . . . . . : ::1
                                       127.0.0.1
                                       8.8.8.8
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 12:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{2C549BDD-1164-4933-8E08-A725CB8E4CB4}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
And the client has this parameters configured:
Network Adapter  Intel(R) 82578DM Gigabit Network Connection
IP Address   192.168.2.135
MAC Address   84:2B:2B:C3:2C:8B
Gateway   192.168.2.1
DHCP Enabled   Yes
DHCP Server   192.168.2.1
DHCP Lease Expires  09/26/2014 09:01:07 AM
DHCP Lease Obtained  09/24/2014 09:01:07 AM
DNS Server Search Order  192.168.2.10
IP Enabled    Yes
IP Subnet    255.255.255.0
WINS Primary Server
WINS Secondary Server
Last Check Date  9/25/2014 12:01:47 AM
I'll post a complete ipconfig from the client later, because I have to remote in and now it's not available.
Regards.

Wifi profiles SCCM 2012 R2 and Windows Intune

Similar Messages

Maybe you are looking for