Wifi red cross

i m not able to see the network connection available which are shown in other laptop(wifi).instead it is showing red cross mark on wifi however when i go near to router it is available.it seems problem with adapter.my driver for wireless network connection is Broadcom 4313GN 802.11b/g/n1*1 wifi adapter.my laptop is HP Pavilion g6-1312tu notebook pc .please help me.

Hi,
When trying to connect the Wireless network, please check the “Start the connection automatically” option. Then, when you trying to connect certain Wireless network next time, it should connect
to the Wireless network automatically.
In addition, update the wireless adapter driver to see how it works.
Also, please check this thread:
wireless adaptor disables automatically
Hope this helps.
Vincent Wang
TechNet Community Support

Similar Messages

My laptop wifi connection disables automatically and red cross comes up

Hello
I just bought a new toshiba laptop L850-B211 with win 7 home premium 64 bit and i have noticed that my wifi disables automatically in between and i see a red cross come up on the tower icon....when i click on the tower cross it automatically connects....and
works fine again. But why is it disabling the wifi adapter automatically. this happens in every 30 or 40 mins even when i am surfing the net. Is this a hardware problem or some setting in windows 7 or toshiba power management utility which is causing this
problem. Also to mention i always use my laptop with power cord connected. The model no of wifi adapter is ATHEROS AR9485WB-EG.
Thanks,
Amit T.

Hi,
When trying to connect the Wireless network, please check the “Start the connection automatically” option. Then, when you trying to connect certain Wireless network next time, it should connect
to the Wireless network automatically.
In addition, update the wireless adapter driver to see how it works.
Also, please check this thread:
wireless adaptor disables automatically
Hope this helps.
Vincent Wang
TechNet Community Support

CUPC 8.6.1 with red cross which means no ringing

Hello!
In some way, we have the problem, that cupc change it's presence status from DND to available. The red presence indicators changes from red to green, but sometimes, the red cross on the handset icon didn't change, so I have the setup that I have a green presence indicator, but a red cross which means that I cannot hear incoming calls. If you change status back to DND and then back to available brings no success, also restarting the cupc client is unsuccessfull. I do not know when exactly this happens, a lot of users are telling me about this issue. I then have to manually onhook the DND status in device settings of the framework services client of the cupc endpoint to get it running again, that user hear the sound of incoming calls.
Can someone help? Any idea? Someone aware of this issue/bug?
We are using CUPC 8.6.1 and CUCM 8.6.2
Thanks!

No one an idea?

FEBA :Banking: Red Cross on bank statement upload

Hello Gurus,
I am facing a strange behaviour in electronic bank statement uploads.
The file is uploaded in the system and its shown as Red cross. There are no transactions in the bank statement and the opening and closing balances are same.
There is no activity in the bank account and still on loading the satement it shows a Red Cross for file loaded on June 20th.
The file coming on June23rd is loaded successfully and has a green checkbox where again there were no transactions and opening and closing balances are tallied.
I dont see any value or sign difference. I checked other threads but couldnt get solution and had to open a new discussion
Any thoughts on how we can change the red cross to Green Tick. SAP instance is on ECC 6.0.
Any utility to be developed?
Regards
Rutvij

Hello Rutvij,
FEBAN - give Co.code, house bank, account id, statement date and statement nubmer.
If it is outgoing payment then go to statement items i con in top side of that screen. Then click post option.
In the next screen click on payment order because if you want to clear invoices based on payment orders or click either reference or document number in additional selections tab. And then give your co.code and account type. If required, put additional selection like amount, reference, etc in additonal selections tab.
Press enter and then select open items to be cleared and then save.
Now SAP will display all open invoices against the customers. Activate the invoices that must be cleared. Simulate document. Now enter the payment amount and press enter.
Enter once again in the next screen then press save. Now you will get a message saying that document got posted with no.xxxx in co.code
I hope it will resolve your issue else revert us with your query.
Thanks & Regards,
Lakshmi S

I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" the error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?

I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" An error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
You can try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See http://kb.mozillazine.org/Unable_to_save_or_download_files

A red cross has come up on the screen of my Ipod classic, what do I do?

my ipod classic was out of charge so i have charged it for 24 hours. when i went back on to it it came up with a red cross and said that i had to go the support page but i cant find anything and need help. any suggestions.

iPod Displays a Red "X" Icon
tt2

Function will not run (and shows with red cross in SQL Developer)

I have created the function below by typing into the "Enter SQL Statement" box in the SQL Developer tool and running. I see the message "create or REPLACE FUNCTION Statement Processed". I see the Function in the tree view, but it has a red cross icon next to it, so I guess somethings wrong with it. When I try to run it I get the message "The selected program is in an invalid state for running. Recompile the program and try again." If I right-click the function and compile then I get no errors but the red cross remains and I still can't run it.
What am I doing wrong?
Also, I am planning on supplying a SQL script to customers that will have this function at the top of the script, and then I will use the function throughout the rest of the script to decide whether or not to drop a table before re-creating it. Will that be ok? i.e. will the function be available to the rest of the script, or would the function creation need to be followed by a commit/grant/other?
CREATE OR REPLACE FUNCTION CHECK_TABLE_EXISTS(tableName VARCHAR2)
RETURN BOOLEAN IS
    tableExists NUMBER(1,0);
BEGIN
      SELECT COUNT(*) INTO tableExists FROM user_tables WHERE table_name=tableName;
      IF tableExists = 1 THEN
        RETURN TRUE;
      ELSE
        RETURN FALSE;
      END IF;
END CHECK_TABLE_EXISTS;Thanks,
Paul

Hello Try the same at sqlplus and see how it goes. It should not throw any error messages as I tried the same as a normal user Scott with only (connect, resource) priveleges. You dont have to grant any specific previleges for user_tables.
-Sri
SRI>conn scott/tiger@sri
Connected.
SRI>CREATE OR REPLACE FUNCTION CHECK_TABLE_EXISTS(tableName VARCHAR2)
2 RETURN BOOLEAN IS
3      tableExists NUMBER(1,0);
4 BEGIN
5        SELECT COUNT(*) INTO tableExists FROM user_tables WHERE table_name=tableName;
6        IF tableExists = 1 THEN
7          RETURN TRUE;
8        ELSE
9          RETURN FALSE;
10        END IF;
11 END CHECK_TABLE_EXISTS;
12 /
Function created.
SRI>set serverout on
SRI>begin
2 if check_table_exists('EMP') = TRUE
3 THEN
4 dbms_output.put_line('Found');
5 else
6 dbms_output.put_line('Not Found');
7 end if;
8 end;
9 /
Found
PL/SQL procedure successfully completed.

I can't drag and drop any music from iTunes into the iPad tab on the left it just come up with a red cross ? Help !

I just up loaded a load of music onto my computer and then when I press ctrl and s and try to drag the album tag over the iPad one it just comes up with a red cross and won't let me drop anything in it !

You will need to Sync your iPad and all Music/Albums Selected will transfer over from iTunes..
iOS: Syncing your data with iTunes
http://support.apple.com/kb/HT1386

TS1382 My ipod won't reset, tried ALL the steps several times. The 'red cross' always appears, any suggestions?

I have tried to restore this to disc mode as suggested in the apple help section but it doesn't work.
The red cross inside a red circle, with the apple web address at the bottom, keeps returning.
Anything else I can try, or is it a costly repair shop I need?

That symbol,
is also known as the Fatal Red X, which mean that your iPod Hardisk is dying, cannot be booted up or dead. There is nothing much we can suggest here except read this Apple support Article or to send your iPod in to Apple Store or any 3rd Party iPod Repair vendor, for a replacement.

Satellite C660D-1GD: no sound and Red Cross over speaker

Just turned on my Laptop, Satellite C660D - 1GD and my sound isn't working.
There is a red cross over the speaker and the diagnosis didn't help at all.
Tried a system restore, nothing - no change at all. Tried going through the system drivers and there is no driver for sound :o. Ok, came to this site, downloaded the correct driver, installed and restarted and nothing again :s .
Updated the BIOS and then went into and checked the BIOS, and even checked for simple sound to just have my time wasted. Any help would be great.
Thanks in advance.

_Firstly:_
Did you check if mute isnt enabled?
Press FN + ESC to enable or disable mute
_Secondly:_
Go to control panel -> sound -> Playback tab
Check if the devices in the playback tab are activated and set as default device
Additionally click right to ensure that options are marked like; show hidden devices, show disabled devices
_Thirdly:_
The sound card is from Realtek.
So you can download the Realtek HD audio driver from Realtek driver page
Before installing new driver, uninstall installed Realtek driver from control panel -> programs & features

The applet fails to load. with 'red cross' screen JVM 1.6.19 and above

After updating the JVM to one of the latest version 1.6 builds, our users started to experience a problem with opening java applets.
All the users have JVM versions 1.6.0_19 – 1.6.0_26 on Windows 7/2008. The browser is IE8. On the server usually there is IIS7, with ‘Integrated Windows authentication’
on applet’s virtual folder. Applet’s classes are packaged into a signed JAR file. Both the client and the server are located in the same local area network with no proxy or firewall between them.
The applet’s website usually belongs to the trusted security zone. When loaded, the applet establishes HTTP connection to the server to get the necessary data.
When the user tries to open an HTML page containing the applet, there can be the following scenarios:
1.     The applet fails to load. We’re getting a ‘red cross’ screen. All the HTML elements except of the applet are loaded OK.
From the IIS log we can see that the loading of the JAR file failed with the error code 401, the user name field in the log for the JAR is empty.
2.     The java asks for the user name and password showing a popup ‘Authentication required’. At this moment we can see the following message in the Java console:
network: Firewall authentication: site=/XX.XX.XX.XX:XX, protocol=http, prompt=, scheme=ntlm
If the user enters the correct credentials, the applet loads OK. Even if the user checks the ‘Save the password in your password list’ checkbox, Java continues to ask for credentials
on every page reload. It’s worth to note that the company’s external firewall doesn’t get any requests from the applet.
The problems happen even when the client and the server are located on the same machine, but never happens when we use localhost as the server name in the page URL.
During investigations we found out the following workarounds:
1.     Enabling anonymous authentication on the virtual folder always solves the problem.
2.     Sometimes, changing security zone from ‘Trusted’ to ‘Local intranet’ solves the scenario 2 (‘Authentication required’ popup) problem.
It’s worth to note that changing the security zone never helps if the page URL contains dots (for example, uses IP address instead the server name).
3.     Upgrading to IE9 solves the scenario 2 problem partly: Java asks for the credentials only once.

I have the same issue. I use single sign-on with IIS 7 and Integrated Window authentication on the tomcat virtual folder. The applet jar file is on the root directory of the web application (the same level of index.html). So I use '.' as the code_base to call the applet from javascript.
So when I launch my web application into a browser, the auto-connection is successfully performed (single sign-on through Upstream, kerberos, remote_user, ...). But when I want to launch the applet in the web application, a new authentication panel (red panel with "authentication required") occurs in order to set credentials (login, password, domain) with the message in the java applet console:
"network: Firewall authentication: site=myApplicationUrl, protocol=http, prompt=, scheme=ntlm"
So why the applet doesn't inherit previous credentials in this case ??
Have you solved this problem ?
Thanks
Edited by: 886341 on 20 sept. 2011 08:56

New 80GB ipod - red cross with support website

Hi
I was connecting my new ipod (only 3 weeks old) to my macbook leopard when suddenly a red cross symbol came up on the screen with the address of the mac support website at the bottom. I went to the website and it suggested I put it in disk mode. The apple sign came up as described - but straight after I toggled the hold button not roughly six seconds after holding the select and menu button as it suggested. Next when I tried to switch 'immediately' to the select and play button, it returns to the red cross with the web address - not to the disk mode screen.
I have tried holding them down for different lengths of time, swapping quicker and faster etc but no change. If I repeat holding the select and menu buttons then the apple symbol goes away momentarily and comes back.
Im on holiday at the moment - so if theres nothing to do but send it off to be fixed then it means Im without my ipod for the long traveling hours - the reason I bought it when I did - only 3 weeks ago - I hadnt expected it to break so soon. I also have a macbook and before that had an ibook and they both had early problems. I am always conflicted with apple - they make the best most advanced and creative products but they are always flawed and undurable - quick to break and succumb to errors. I am starting to think that I may just slum it out with pc in future - it may be better in the long term.
Ironically enough Im not even sure if I kept the HMV receipt at home = I really should have learned after past experiences with apple products. If anyone could save me the hassle and money of paying for repair (if I cant find the proof of purchase) by suggesting another way to fix it for the rest of my journey - I would really appreciate it!
THANKS :)*

Ok researched online and managed to get it in Diagnostics mode.
Ran a test on HDD Specs and HD Smart Data - both resulted in "Error! Diag Halt" flashing across the bottom of the screen.

When I put in my new serial number I get a red cross

When I put in my new serial number (after approval from adobe) I get a red cross

I think you better check with Customer Service, make sure that they are all numbers rather than having any letters. 0 the number can look like O the letter.

Materialized view showing red cross in front of it in SQL developer

we created a materialized view in oracle database,it works fine, and other views that select on it return results and work fine too. But it has a red cross in front of it in oracle developer.
I then refresh the view, or recreate the view, it shows green, but after a while when I come back, the red cross show up again.
What does it mean, any error message we can find?
Thanks

878566 wrote:
we created a materialized view in oracle database,it works fine, and other views that select on it return results and work fine too. But it has a red cross in front of it in oracle developer.
I then refresh the view, or recreate the view, it shows green, but after a while when I come back, the red cross show up again.
What does it mean, any error message we can find?
It means your system is working NORMALLY! There is no 'error message' to find because there is no error. What you describe is EXACTLY how MVs are designed to work.
It is NORMAL for MVs to be, and to become, invalid, especially if there refresh setting is ON DEMAND. Don't confuse 'validity' with 'staleness'; they are very different things.
See the section 'Invalidating Materialized Views' in the Data Warehousing Guide'
http://docs.oracle.com/cd/B28359_01/server.111/b28313/advmv.htm#i1007082
Invalidating Materialized Views
Dependencies related to materialized views are automatically maintained to ensure correct operation. When a materialized view is created, the materialized view depends on the detail tables referenced in its definition. Any DML operation, such as an INSERT, or DELETE, UPDATE, or DDL operation on any dependency in the materialized view will cause it to become invalid. To revalidate a materialized view, use the ALTER MATERIALIZED VIEW COMPILE statement.
A materialized view is automatically revalidated when it is referenced. In many cases, the materialized view will be successfully and transparently revalidated. However, if a column has been dropped in a table referenced by a materialized view or the owner of the materialized view did not have one of the query rewrite privileges and that privilege has now been granted to the owner, you should use the following statement to revalidate the materialized view:
ALTER MATERIALIZED VIEW mview_name COMPILE;
The state of a materialized view can be checked by querying the data dictionary views USER_MVIEWS or ALL_MVIEWS. The column STALENESS will show one of the values FRESH, STALE, UNUSABLE, UNKNOWN, UNDEFINED, or NEEDS_COMPILE to indicate whether the materialized view can be used. The state is maintained automatically. However, if the staleness of a materialized view is marked as NEEDS_COMPILE, you could issue an ALTER MATERIALIZED VIEW ... COMPILE statement to validate the materialized view and get the correct staleness state. If the state of a materialized view is UNUSABLE, you must perform a complete refresh to bring the materialized view back to the FRESH state. If the materialized view is based on a prebuilt table that you never refresh, you will need to drop and re-create the materialized view.
As the doc states Oracle will normally 'revalidate' an MV when it is referenced. You can do this manually by using 'ALTER . . . COMPILE'. For an ON DEMAND MV compiling it will NOT alter the contents of the MV - it may stil be STALE.
You don't need to REFRESH or recreate the MV to make it valid; just recompile it. If it doesn't become VALID after you compile it then there is usually an issue with one of the dependent objects that you need to resolve.

My bb 9380 won't turn on while the screen shows one battery sign with red cross mark ( not charging sign )

my bb 9380 won't turn on while the screen shows one battery sign with red cross mark ( not charging sign ), i think the battery drained and switch it for charging but it will show only not charging sign . i bought this phone before 9 months, whats the solution for this ?

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Wifi red cross

Similar Messages

Maybe you are looking for