Wifi router blocks access after some time.

So i have router lynksys WRT120N and the latest 1.0.0.7 firmware. And the problem occured frequently. I'll explain for example what happened yesterday.
At about 13.00 i went out, wifi was working okay. At around 18.00 i returned home and i was trying to connect to the wifi with my android phone, and suprisingly it did not work. I tried on my laptop and on a android tablet. It did not work. The only thing that i could figure it out is to reset the router. I checked the settings, and there was no access policy e.g. time based access blocking.
any ideas?
cheers

You're welcome.

Similar Messages

E1000 Router Wireless signal will disappear after some time

Hi,
I have set up the E1000 this week, i found that the wireless signal would disappear after some time if the wireless connection is not in use.
For example, on my iphone
1. I search for the wireless signal and successfully got the IP
2. after using for some time, i put the iphone aside
3. when i want to use the wireless again, the iphone is not yet connected to the wireless
4. i would then need to search for the wireless signal and connect again.
This causes problems because i am using some VPN connection at my laptop and it would disconnect it.
Is there any config that would keep the wireless signal ?
Thanks!

Try changing the wireless channel on the router.
Also try to change some advanced wireless settings on the router. Click on Wireless tab and go to Advanced wireless settings. Change the Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.
See if that helps you.

Process.getInputStream() block after some time

Hello!
First sorry for my bad english. I have a problem. I hope anybody can help me!
I have this source snipplet
this.Main.ffmpeg = runtime.exec(cmd);
this.is = this.Main.ffmpeg.getInputStream();
while(true) {
     d = this.is.read();
     if(d == -1) {
          //End of file
}The subprocess is ffmpeg with piped output (binary data)
After some time, in this case about 10-15 minutes, the read() function blocks running. I dont understand why, because ffmpeg is still running (not running because it is waiting for output read).
Can anybody help, why read blocks my loop, and why not read more data?
Thanks!

I made some test.
a.)I run process the same process without my application in a shell: ffmpeg -i ..... - > /dev/null.
The process hasn't stopped producing output. I tried many times.
And...
I tried my java program with "cat /dev/urandom". It hasn't blocked the read() function for a long long time.
So I think something wrong with binary data (I can't think another thing). Something isn't good for InputStream.
b.) 'd' is int, but a some lines later I do a cast to byte:
if (d != -1) {
    this.Main.buffer[this.Main.written_byte++] = (byte) d;
    num++;
} else {
     break; //from is.read() loop
}I don't thik this can be problem.
Maybe I need to read not bigger blocks, with read(Byte[] arg0, int arg1, int arg2)?

My ISP requires a http login. I can use the iPad fine if I am logged in on a PC connected to the same wifi network, but if I login on safari on my ipad, the connection drops after some time.. any workaround?

My ISP requires a http login. I can use the iPad fine if I am logged in on a PC connected to the same wifi network, but if I login on safari on my ipad, the connection drops after some time.. any workaround?

TJBUSMC1973 wrote:
The iPhone is working, as designed and advertised. In this case, the user failed to educate themselves properly, either by proper research or asking the right questions, before purchasing the device.
I understand that the OP failed to do research. But then, I wasn't replying to the OP. I was replying to Chris. I have Verizon. I can talk and use data at the same time with my Droid Maxx. Therefore, the problem is not just with the network. It would be technically possible for an iPhone to do that on Verizon/Sprint if Apple had chosen to use a different chip, such as the kind other phone manufacturers have elected to use.
Of course, this is probably all irrelevant to the OP's issue. It was merely a point of clarification, especially for those people who are used to being able to use both voice and data at the same time on Verizon. When they switch to an iPhone, they are often surprized at the limitation.
Best of luck.

My new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

my new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

settings - general - reset - reset network settings.

My Iphone 3G stopped booting and failed to start. After some time, I have restored the Iphone OS using Itunes (ver 4.2). Itunes restored it successfully, but the Iphone didn't responded and remained the same.except apple logo, nothing is displayed.

Hi,
I have an Iphone 3G.
Its 9 months old mobile and it has OS 4.2 in it.
When I am accessing wi-fi, suddenly the display went-off and then I was not able to start my phone again.
Later I tried to restore and update the Iphone using Itunes.
I have updated the Itunes.
Using hard-reset, I tried to restore the OS and did the same successfully.
After installing the same over my Iphone 3G, I didnt recieved any intimation for completion of the process, besides, I was not able to start the mobile even I have reset the OS.
when I push the wake-up button, I am able to see the Apple Logo and after some time, it goes off and remains idle with no more display.
I tried to reset OS twice, it remained the same.
Can any one help me here with this issue.
I am not even able to figure-out the cause of the problem.
Thanks in advance.
Bharath.

Hi,
I have an Iphone 3G.
Its 9 months old mobile and it has OS 4.2 in it.
When I am accessing wi-fi, suddenly the display went-off and then I was not able to start my phone again.
Later I tried to restore and update the Iphone using Itunes.
I have updated the Itunes.
Using hard-reset, I tried to restore the OS and did the same successfully.
After installing the same over my Iphone 3G, I didnt recieved any intimation for completion of the process, besides, I was not able to start the mobile even I have reset the OS.
when I push the wake-up button, I am able to see the Apple Logo and after some time, it goes off and remains idle with no more display.
I tried to reset OS twice, it remained the same.
Can any one help me here with this issue.
I am not even able to figure-out the cause of the problem.
Thanks in advance.
Bharath.

The menu screen does not appear on the apple tv but after some time my photos appearing

When I turn on my apple TV nothing come up but after some time my photo's from my iCloud account start to appear. Why would this be?

Welcome to the Apple Community mecarroll.
The following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

WL 10.3 - Quartz's jobs stops after some time of correct executing

Hi,
I have a webapp (backend only) that is deployed on WebLogic 10.3 AS. In this webapp 5 quartz's job are executed (cron trigger). Two of them run 3 times a day, the next two of them execute every 5 seconds and the last one starts every 20 seconds.
The problem is that after some time of correct execution (about 20 min.) one on the jobs hangs on, then after some time (about 10 min.) the second one hangs on and finally only one of job (it's always the "20" second job) executes correct for a long time, then also stops. Above, concerns the only the "5" and "20" seconds jobs. All of the jobs are stateful and Oracle DB is used for synchronisation.
In DB I see that "TRIGGER_STATE" in "TRIGGERS" tables has value of "BLOCKED" for the jobs that hang on. Whenever the job crashes I see the following entry in the WL's log:
####<2011-05-30 08:50:11 CEST> <Info> <RJVM> <server_name> <AdminServer> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306738211453> <BEA-000513> <Failure in heartbeat trigger for RJVM: -6468277378824263512S:127.0.1.1:[7001,7001,-1,-1,-1,-1,-1]:test_domain:test-server
java.io.IOException: The connection manager to ConnectionManager for: 'weblogic.rjvm.RJVMImpl@559e - id: '-6468277378824263512S:127.0.1.1:[7001,7001,-1,-1,-1,-1,-1]:test_domain:test-server' connect time: 'Mon May 30 08:45:11 CEST 2011'' has already been shut down.
java.io.IOException: The connection manager to ConnectionManager for: 'weblogic.rjvm.RJVMImpl@559e - id: '-6468277378824263512S:127.0.1.1:[7001,7001,-1,-1,-1,-1,-1]:test_domain:test-server' connect time: 'Mon May 30 08:45:11 CEST 2011'' has already been shut down
     at weblogic.rjvm.ConnectionManager.getOutputStream(ConnectionManager.java:1719)
     at weblogic.rjvm.ConnectionManager.createHeartbeatMsg(ConnectionManager.java:1662)
     at weblogic.rjvm.ConnectionManager.sendHeartbeatMsg(ConnectionManager.java:599)
     at weblogic.rjvm.RJVMImpl$HeartbeatChecker.timerExpired(RJVMImpl.java:1584)
     at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>The quartz version I use is 1.8.4.
I use my own implementation of scheduler to start the jobs at the deploy time. Jobs are also always unscheduled when the app is undeployed. After undeploying all entries from quartz's tables are erased excepting the one in "SCHEDULER_STATE" table.
The webapp is tested standalone but it will be in the production environment it will be clustered (two nodes).
What can cause the problem? And how to solve it?
Below is my quartz.properties file as it's deployed with webapp:
#============================================================================
# Configure Main Scheduler Properties
#============================================================================
org.quartz.scheduler.instanceName = SimulatorClusteredScheduler
org.quartz.scheduler.instanceId = AUTO
#============================================================================
# Configure ThreadPool
#============================================================================
org.quartz.threadPool.class = org.quartz.simpl.SimpleThreadPool
org.quartz.threadPool.threadCount = 10
org.quartz.threadPool.threadPriority = 5
#============================================================================
# Configure JobStore
#============================================================================
org.quartz.jobStore.misfireThreshold = 60000
#org.quartz.jobStore.isClustered = true
#org.quartz.jobStore.clusterCheckinInterval = 20000
#org.quartz.jobStore.class = org.quartz.impl.jdbcjobstore.JobStoreTX
org.quartz.jobStore.class = org.quartz.impl.jdbcjobstore.JobStoreCMT
#org.quartz.jobStore.driverDelegateClass = org.quartz.impl.jdbcjobstore.oracle.OracleDelegate
org.quartz.jobStore.driverDelegateClass = org.quartz.impl.jdbcjobstore.StdJDBCDelegate
org.quartz.jobStore.useProperties = false
org.quartz.jobStore.dataSource = myDS
org.quartz.jobStore.nonManagedTXDataSource = myDS
org.quartz.jobStore.tablePrefix = QRTZ_
org.quartz.jobStore.isClustered = true
org.quartz.jobStore.clusterCheckinInterval = 20000
#============================================================================
# Configure Datasources
#============================================================================
org.quartz.dataSource.myDS.jndiURL=${org.quartz.dataSource.myDS.jndiURL}
org.quartz.dataSource.myDS.jndiAlwaysLookup=true
org.quartz.dataSource.myDS.java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory
org.quartz.dataSource.myDS.java.naming.provider.url=${org.quartz.dataSource.myDS.java.naming.provider.url}
org.quartz.dataSource.myDS.java.naming.security.principal=${org.quartz.dataSource.myDS.java.naming.security.principal}
org.quartz.dataSource.myDS.java.naming.security.credentials=${org.quartz.dataSource.myDS.java.naming.security.credentials}
#======================================================================
   # Configure Plugins
#======================================================================
#org.quartz.plugin.jobInitializer.overWriteExistingJobs = true
#org.quartz.plugin.shutdownhook.cleanShutdown = true Any help would be greatly appreciated.

Thanks for you response,
I have a entry, in web.xml, because of this this working at startup time. (connecting the quarts scheduler)
When server and application started every thing it's working but after some time(mostly after 30 minutes), without any change in server/application we are getting the above error.
We have entry in web.xml file like this.
<ejb-local-ref>
<ejb-ref-name>ejb/DXTrackingSession</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<local>com.sample.app.ejb.tracking.DXTrackingSession</local>
</ejb-local-ref>

I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

Are you trying to update via wifi or connected to your computer?
 Cheers, Tom

BC4j/JSP Application not responding after some time - when deployed on 9ias

Hi,
We are using BC4j/jsp application on 9ias. The application is not responding
after some time. We have installed 9ias on PIII(384MB RAM). We tried to accesses
with 10 users, and server is not responding to BC4J/JSP application.
However the server could able to publish the JSP pages with standerad JDBC code even after that.
many many thanks in advance
null

When the application deployed by BC4J/JSP not responding, does the sample JSP application still works? i.e. does any other application respond? Does 1 user respond? Is the database source (JDBC), running Oracle 8.1.7? What is the platform running the database (e.g. local NT database)?

BC4j/JSP Application not responding after some time - when deployed on 9ias BC4j/JSP

Hi,
We are using BC4j/jsp application on 9ias. The application is not responding
after some time. We have installed 9ias on PIII(384MB RAM). We tried to accesses
with 10 users, and server is not responding to BC4J/JSP application.
However the server could able to publish the JSP pages with standerad JDBC code even after that.
Please....help us.........
many many thanks in advance

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Is there any mechanism that cleans up these connections (back down to the initial or some other minimum I would guess) or do they hang around until either the app server or database shuts down?<HR></BLOCKQUOTE>
There is currently no mechanism for reducing the connection pool size after a period of high activity. Recently this has been frequently requested and as such will be implemented in the next production release.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>We have verified this in manual testing. However, when the load tool script exits it doesn't seem to release resources. We know this because we keep seeing our database connections go up and up as more tests are run. Further, we also seem to see more than one connection per "virtual user". For example, when I connect 5 users to the app in manual testing, I get 5 connections. But, when we run a test using the tool, we get 395 database sessions for 200 users. We are having a bit of difficulty understanding why the behavior is different.<HR></BLOCKQUOTE>
Assuming that the you are performing your manual testing against the same instance of the application on which you are performing your load testing, I would assume that the connections are being released to the pool at the end of the request. One possible reason for the approximate 2:1 ratio between connections and virtual users may be BC4J's use of internal connections. What version of BC4J are you using?
BC4J requires an internal connection to support state management and spill to disk. The internal connections are pooled with the transaction connection and only held for the duration of the persistence operation. However, if the web server is very busy then a large number of synchronous persistence requests may be received which would explain the eventual 2:1 ratio in the pool's high water mark.
If the user start times and think times are staggered in order to reduce the incidence of synchronous persistence requests does the ratio of connections to web sessions stabilize at some lower number (i.e. 1.5:1)

TS1702 ios 6 not updated in my new i pad, when i tried to update my i pad after some time a error massage shown and download stoped, same thing happen in i tune , i talked to apple customer care india , aftre talked them i disable my window firewall , and

dear all i have facing promblem when i download ios 6 in itune, as well as in ipad, when i start download after some time or after 200 to 300mb it stop, and a error msg shown , i have talked to apple india cutomer care and after that i disabled my window firewall, and as well as my antivirius and i also disabled my modem firewall but after that still i m unable to update my new ipad with ios 6

There is nothing in that other thread that clarifies what you did about Error 3014
Here is the description of that error:
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

Cannot erase authorization. "Unable to erase authorization. Please try after some time." Please help!!

I am having a number of problems with Digital Editions, and I have tried the chat options numerous times but no one seems to be able to help me. I cannot express how disappointed I am with Adobe. I have an ebook that I paid a lot of money for and I need to access it for work, but when I try to download the e-book I get the error message E_ACT_NOT_READY. The forums say I need to deauthorise my account, but when I try to erase authorization I get the message "Unable to erase authorization. Please try after some time." This has been happening for weeks. For 2 weeks I have been trying to solve this problem. Can somebody please help me or give me a phone number to call to reach adobe? I am desperate at this point.

If due to some reason, you are unable to deauthorize ADE, follow the below steps:
Mac:
1. Go-> Go to folder.
Go to folder dialog will appear.
2. Type ~/Library/Application Support/Adobe/Digital Editions
drag the activation.dat file to the trash.
ADE will be deauthorized now.
Now Authorize ADE again.
ADE will be deauthorized now.
Now Authorize ADE again.
Windows:
Choose Start > Run.
In the Open text box, type regedit and then press Enter. The Registry Editor opens.
In the left pane of the Registry Editor, locate the following registry key:
HKEY_CURRENT_USER\Software\Adobe\Adept
Right-click the Adept key and choose Delete.
In the Confirm Key Delete dialog, click OK.
Your authorization will be deleted.
ADE will be deauthorized now.
Now Authorize ADE again.

No http after some time in user account

I have a strange behavior. After a restart (Software Update), I couldn't visit any webpages. Network diagnostics said everything was ok. I could send and receive email. I tried another browser: Same result. I logged into my administrator account: everything worked.
I could fix that problem by changing my proxies settings from "Using PAC-File" to "manually", but the next time, I wanted to use the internet, same problem.
So now, I have to toggle the proxies settings a couple of times until the internet works again, after every sleep or restart. My wife even lost the "connection" after working some time in other programs.
This is very annoying, so help would be appreciated.

Hello @Polysept,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your monitor turns black after some time in use, and I would be happy to assist you in this matter!
Since you mentioned that your desktop was overheating, I recommend following the steps in this document on Reducing heat inside the PC to prevent overheating.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

SA 540 drops wan connectivity after some time interval

hello guys,
I have problem. after a certain period of time (ranging from 2 minutes to several hours) the unit keeps dropping the WAN connection, making the unit unaccessible from the WAN side. The strange thing is, that when the connection is dropped, the unit is perfectly accessible from the LAN side, the WAN LED is still on, status info shows the WAN link up, and packet trace shows broadcasted traffic on the WAN interface, so only the directed communication to and from the ISPs gateway (configured to fix IP) seems to be blocked for some reason. When this happens, then plugging the WAN cable to the Optional WAN port enables traffic again, but it is also dropped after some time, and then only power cycling the unit restores WAN connectivity.
please suggest me as soon as possiblethat how to fix this problem?
Awaiting for valuable reply.....

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Wifi router blocks access after some time.

Similar Messages

Maybe you are looking for