Wifi scanning doesn't work on HP 5110 e-all-in-one

I have windows 7 netbook. I have had to install the printer manually because the installation software gets stuck at the finding printer on wifi stage (progress bar goes to completion but then freezes and only way to stop is to restart the netbook). So the printer has added itself to wifi succesfully, using the onscreen wizard on the printer itself. I have added the printer to my pc for wifi printing manually using the ip address, and then downloaded the drivers by usb cable connection which automatically added all the drivers (I thought). So printing works over wifi but scanning only works by using USB cable. I would like to be able to scan over wifi too. Any ideas on whether there are additional drivers to install for that or if there is any sort of manual set up I can do?
Thanks

HI @Rprine , and welcome to the HP Forums!
I see you're experiencing driver issues. I would like to help.
Are you able to make a copy?
I would recommend performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

Every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.

every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.

This may sound silly but try your date a time setting my ipod had the same problem and i had even checked the the date and time went all the way to the apple store for help and the genius guy just rest the date and time and it worked just fine.

HP PSC 2355xi Scanning doesn't work with Leopard

Please help! I have an iMac that I've upgraded to Leopard and an HP PSC 2355xi printer. It will print fine but I cannot use the All in One software from Hp and therfore, I cannot scan documents or use it's scanning functionality. I've downloaded the latest All in One software and reloaded it, to no avail. Very Frustrating! Please help with ideas or thoughts.

I've had the same problem with an all-in-one I purchased in Dec. I can't figure it out either. The model I purchased is not listed on the HP web-site. Yes, the web-site is not exactly helpful. I tried the chat support and as soon as the person found out that I was a Mac user, that became the end of the help session. I spent the next hour on the phone with support. I finally hung up and went to other forums to figure it out.
I have uninstalled and reinstalled about 3 times. I even went back to OSX 10.5. I'm assuming HP Scan Pro is the software to use. I get no communication between the all-in-one and my laptop when it comes to scanning. I'm not finding HP to be Mac friendly.

I can`t use apple store. my apple id needs my paswoord, to set the security questions, after I introduce the paswoord it askes for the paswoord again and again! it doesn`t work, and the paswoord is the right one. What can i do?

i can`t use apple store. my apple id needs my paswoord, to set the security questions, after I introduce the paswoord it askes for the paswoord again and again! it doesn`t work, and the paswoord is the right one. What can i do?

I have figured out already. Firstly please try:
1) Installing iBooks on your iPhone via iTunes on PC/MAC
2) Adjust the time of your iPhone to 6 months ahead (e.g. 2013 May)
3) Close all apps currently running, clear Safari cache and history, sign out of Apple ID (Settings>iTunes & App Stores), reboot your device
4) Open iBooks on your iPhone, download any 1 book
5) System should prompt you to enter 3 security questions
6) Enter your answer and click "Done" at bottom right part of your input keyboard (Do not press upper right button)
7) Done!
I cannot imagine the system has gone so stupid. Apple, please retify the problem ASAP.

My Iphoto doesn't work. Suddenly I lost all my pics. Someone know how to repair it?

My Iphoto doesn't work. Suddenly I lost all my pics.The version is the last one.
Someone know how to repair it?

Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

IPhone/iTunes Wifi sync doesn't work

Hi guys,
I don't even have hope to solve this problem anymore but I guess I should post this anyway and show apple the crap software they're giving us.
I'm on Lion 10.7.4 (iTunes 10.6.1) and, after upgrading my iPhone 4 to iOS 5.1.1, my Wifi sync with iTunes stopped working. Out of nowhere. Looking for an answer I started digging on apple foruns and found out there are dozens of threads discussing the problem and literally hundreds of possible solutions. I've tried the following:
- Restart iTunes and iPhone (full power cycle).
- Check the "Sync over Wifi" option on iTunes when iPhone is connected using cable
- Uncheck the "Block iPhone, iPod and iPad from automatically sync" on iTunes > preferences > devices.
- Restart Router
- Reinstalling iTunes
- Restore iPhone
- Move to trash "com.apple.iTunes" and "MobileDevices.framework" files. Restart Mac after.
- Make Airport on Mac and iPhone forget the saved networks and reconfig them
- Open ports on router 123 (all), 3689 (TCP) and 5353 (UDP)
- Disable and enable uPnP on router
- Install Remote app
- Use "Release Liase" option on iPhone under Settings > General > Network > Wifi > Blue Arrow
NONE solved it. I gave up. Apple *****.
Interesting behaviours:
- Remote app doesn't work at all. I can't use it under Home Sharing or that code thing. My phone and Mac simple can't see each other anymore.
- iPhone conects fine using cable. Everything is working and, when I pull out the cable, iPhone vanish from the list. Even with the Wifi option enabled.
So, if any of you can solve it, you will have a place in heaven. And in Apple developing team, probably.
Thank you!

Hi guys,
As I suspected, none of the previous solutions worked. I strongly believe this is some crap in iOS 5.1.1 OR iTunes 10.6.1. More precisely: this is APPLE fault, not something we did wrong or didn't do.
My Wifi sync worked great before this updates (Lion 10.7.2 and iOS 5.0). I can't isolate the problem because I did both updates in less than 24h from one another. Now I'm back to cable and I think I'll still be until Mountain Lion is out.
@rodrigonewtonI sent apple my feedback. Basically everything I wrote here. And I can't connect bluetooth either. Luckily I barely use bluetooth on my Mac.
@ou812ManySushi Lucky you! I'd already tried this without success. What is your iTunes and iOS?
@joejohns90 Doesn't work here, the option is ALWAYS greyed, waiting for my Mac to do something. The only way the "sync over Wifi" button work is pluging the cable. Ironic, isn't it?
Anyway, thanks for the feedbacks guys!

HP Scan doesn't work with HP LaserJet 2840 after upgrade to Leopard

Small bug mucho irritating.
I can't scan documents anymore. The program starts but doesn't give med a scanning window so it's no use at all. The problem is the same on my Intel based MacBook.
Is there a work around? I've seen various solutions by starting the program with rossetta on intel machines but it's not the problem in my case.

Can you elaborate? I'm going through this right now with my HP printer.
It worked fine with Tiger. Worked fine with Leopard when I upgraded. However, when I had to do a complete erase and install of Leopard to try and fix a Mail issue, the scanning no longer worked.
I've escalated with HP and they tell me I am out of luck and can not do scanning (particularly multiple page) to a clean install of Leopard (only if upgraded from Tiger).

HP photosmart C6280 scan doesn't work after once working

I can't understand it - six weeks ago I came on this forum with this problem and it was solved. I used Preview and' import from scanner' which worked fine. I tried it yesterday and it doesn't work again! I've downloaded new drivers from a site suggested to someone else on the forum with the same problem, but it still doesn't work. All I get when I go into System Preferences - printers & fax - is 'No scanner selected' its driving me mad! I had to go and do scanning from my old PC! Heresy! Someone please help!

I seem to have resolved this problem now. I uninstalled ALL stuff I had downloaded including drivers etc., and just went to the page suggested on this forum and put on the new stuff from HP I can now scan properly from my computer without using Preview.

HP photosmart C6280 scan doesn't work

Hi all, I've installed Snow Leopard with no problems at all, until now. I tried to scan a document today (it worked before SL) and it says it can't find the scanner. I downloaded new drivers but it still doesn't work. Any suggestions? thanx

Hi deetroy12,
I am glad to hear, you are mow able to scan from preview.app.
I just want to tell you the full version of HP software is now available here:
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=219&lc=en&dlc=en&cc=us&lang=e n&product=3194498
If you want to install this software (including OCR functionality) you should ensure the former version of HP software is completely removed from your MacOS 10.6.1.
If the HP software is still at your system you should run the HP uninstaller located in /Applications/Hewlett-Packard/. In this uninstaller you can use a hidden function to really remove ALL rests of related HP software: After clicking "Continue" in 1st window of the uninstaller you should press and hold following 3 keys at your keyboard while clicking the "Uninstall" button. the 3 keys are "Ctrl", "Option" and "Cmd". After clicking "Uninstall" while holding the 3 keys you should see a dialog with yellow exclamation mark "Are you sure you want to remove all HP software...?"
Click OK and input your user password. So all related HP software will be gone. After Restart you should install HP software version 10.3 (for MacOS 10.6) from link above.
After this installation the real scan software is "HP Scan" located in path /Applications/Hewlett-Packard/.
With Regards
Fred

Wifi connection doesn´t work in Mac Book 5.1 with windows 7 x86 via bootcamp 4

I have installed Bootcamp 4 drivers and all features are fully working except the Wireless conncetion.
The airport wifi scans and works but i click connect to my wifi and i get an error saying that it´s not possible to connect.
In the Mac OS X side wifi works perfectly and in an other computer with Win7 works the connection..
Anyone know what can i do?
i tried reinstalling everything (bootcamp drivers, Windows7 OS, installing other version of boot camp)but i can´t fix this problem
thanks for helping

It depends on your Mac model. Please see System requirements to install Windows on your Mac via Boot Camp - Apple Support.
For example, for a 13 inch 2012 MBP it is Boot Camp Support Software 4.1.4586.
Post Date: Mar 14, 2013
File Size: 414.74 MB
System Requirements
Mac mini (Late 2012)
Mac mini Server (Late 2012)
MacBook Pro (Retina, 13-in, Mid 2012)
iMac (21.5-in, Late 2012)
iMac (27-in, Late 2012)
Windows 7

Wifi driver doesn't work properly

HI,I've installed W8.1 instead of W7 but Wifi Dosen't work as a reight Way The Wi-Fi works for then depends on the work and then worked for againe
this affects my Job if i download anything,it stop loading continuesly.
I've tried W8 and the same problem but it works truely with w7.
what should i do for making it works truely with W8.1.
Sorry length of e-mail.

vn7571g_user,
Sorry to hear that you are not having the best possible experience with your new notebook. I'd like to try and address a few of your concerns that you have listed and see if there are some things we can resolve for you.
1. Wifi doesn't work properly:
I see that you have posted in a couple other threads (1st, 2nd) regarding wireless issues with this notebook. We can gladly check this unit at the repair depot for you if you are not keen on changing the card out, PM me the following information and I will see what I can do for you:
SNID or serial number
Contact name
Contact number
Email address
Shipping address
Purchase date
2. Wifi doesn't work after switching on and off 'Airplane mode'
If you have already tried to install/update the drivers, it could be a Windows issue. You can attempt a refresh to see if that helps resolve it.
3. Trackpad response is terrible
This notebook uses a precision touchpad possibly, but since it uses Synaptics drivers you have a couple options:
You can change the way that the touchpad works.
It says Windows 7, but you can see if you have this option in the touchpad settings and see if it helps you out.
4. Speakers jar
Do you have the same issue without the Dolby turned on?
5. Num-Lock is 'Off' after every sleep session
Here is a Microsoft article that discusses this feature. You can follow the steps that they list if you would like.
6. Keyboard-backlight setting is 'On' after every sleep session
The backlit keyboard is working as designed. Here is an article with some FAQ about the backlit keyboard to help customers understand its functionality a bit more.
A couple final thoughts:
Did the issue(s) you are having occur before or after Windows updates, sometime a bad installation of an update can cause all sorts of things to happen.
Worst case, you can always try to restore to factory defaults and test all these things before applying updates or installing any applications or programs.

WIFI pairing doesn't work

I can't seem to make this awesome feature work
I find it awesome, because my goal is to use the Z1 Compact Wirelessly as much as possible - which limits the need to open and close the delicate port opening. also i just hate Micro USB ...
WIFI paring (Network Configuration) require a couple of things to work (apparently):
- Windows Firewall (or other) has to be enabled
- UPnP Framework Rule has to be enabled in Windows Firewall (actually named Portable Device Connection)
- UPnP Device Host Service has to be enabled and running (i guess)
- Network Discovery has to be enabled
- more ?? maybe a sacrificed chicken ??
Well... After doing all that, it still doesn't work -- I guess it's not worth the effort ??
A much simpler solution i've found, is to install "SAMBA FileSharing"
https://play.google.com/store/apps/details?id=com.funkyfresh.samba - which works perfectly !

Self-replying, so
Dear Me,
1° To undo the pairing, navigate to folder storage/emulated/0 using "ES File Explorer" and delete file named after the computer you want un-pair.
2° Redo the pairing.
brgds, Me Again
[Edit]
Seems to be ok for now, at least the devices still show on the list.
Would be nice to have shortcut(s) for connecting to pc / laptop on the home screen and / or smart connecting, but could not find either. I must have missed it surely it can not be only accessible via settings, can it?
[/Edit]

Scan doesn't work after downloading Windows 10

After downloading Windows 10, scanning will not work on my HP Officejet Pro 8620 all in one printer. I used HP Print and Scan Doctor program and it stated that it fixed my scanning problem. However, when I attempt to scan I get a message that says it cannot find the application to support the selection. BTW...I have also unistalled and reinstalled the driver for this printer thinking it might been to "reconnect" in some way with Windows 10. On another note, by DVD drive now doesn't work either after downloading Windows 10. HELP !!

Hey there,
Try the following step's, i believe it will help you overcome the issue.
1.Start by dissconnecting the USB cable.
2.Remove the Printer Driver from the "Devices and printer's" which can be found in the control panel.
3.Download this file (http://ftp.hp.com/pub/softlib/software12/COL48430/al-117537-4/DJ1510_188.exe) which is the full solution for the HP Dj 1510 series.
4.Extract the contents from within the file.
5.Open up the "Utils" Folder and within choose the "x64" folder, Inside you should be able to spot a File called "RemovePreInstalledDrivers" >> After you will open that file a Black screen will open, Wait for it to close then move to the next step.
6. Go back to main folder where you have already extracted the software and Right click on the x64.msi file (Name will most likely consist your printer model) and choose the "Repair" Option. >>Afterwards you will be prompted to preformed a restart. (Incase you will get a Messege saying "This action is only valid for products that are currently installed" Just double click the file instead)
7.After the restart, Head into Local Disk C/ProgramFiles/HP/PrinterModelFolder/bin/USBSetupLuncher and double click it.
8.Follow the steps shown to you and connect the USB cable when you are asked to.
That should add the scanner to Your imaging devices.
Best Of luck~

I try everything but the wifi sync doesn't work, please help...

Hello,
I tried:
Restore my iPhone 4 (iOS 5.1.1)
Check router settings (tried default settings and reset also)
Check everything in iTunes
Connect to different wifi
Upgrade my MacBook Air to Mountain Lion (1.0.8.0)
....etc.
I have everything latest, I read almost everything about it, tried tweaks, but none of this doesn't work.
When I've got my iPhone connected to Mac through USB with wifi enabled, sync work well...
Everything worked fine all the time and from day to another it doesn't work anymore.
It's a pain in the ***, I have already lost my mind. Nothing work.
I appreciate any help from you guys, thank you very much
(sorry for english, I'm czech)

I probably do not understand your question. But try this, maybe this is what you want. Try iCloud on your iPhone.
Tap Settings App > Wi-Fi > turn it ON. Then go back to Settings and below General tap > iCloud. Make sure your account is there, turn ON what you like and then at bottom select Storage & Backup. Hopefully this will help you.

Acquire N Scans doesn't work

Acquire N Scans VI (it is an example VI) does't work to collect noise ( no input connected)

The problem is: I don't measure noise, but I measured it before. So, the problem is not the device (it is a PXI-4472) but it is in Labview. Nothing has been modified. Yesterday it worked, today it doesn't work.
Look at the VIs: they are extremely simple. Cont Daq and Acquire N Scans are the same as those in the Example Fider. Only ACQ&Wite has been little modified. They acquire only if signal is more than 0.465 V pk-pk.
Attachments:
Acq2.vi ‏82 KB
Acquisizione.vi ‏278 KB
Acquire_N_Scans_G.vi ‏77 KB

Wifi scanning doesn't work on HP 5110 e-all-in-one

Similar Messages

Maybe you are looking for