Wifi-select on Install media?

Why not put wifi-select package on the install media for easy wifi setup?

netcfg provides wifi-menu with the same functionality. Besides, even if you have something as wifi-select or wifi-menu, you still need to set up drivers before (in case you didn't get lucky with the wireless chipset).

Similar Messages

Wifi driver not installing for windows7 64 Bit edition

HI
i had replaced my operating system to windows ultimate Bit.
My laptop model no: G580 (20157)
after replacing my operating system all the drivers are installed successfully except network controller & USB 3.0 host controller.
then after i tried to reinstall my driver and installed my driver.but wifi is not working
please help me my wifi driver is installed but not working.i had installed energy management then from shortcut i turn on my wifi but it is not turningon.
and when i searched from CMD promt(c:\netsh wlan show drivers),it gives there is no wifi driver found.
please anyone suggest me wether there is any other driver for this problem....

Hi Slape84,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the Wireless driver is not getting installed in your G580 laptop after re-installing OS (Operating System), I suggest you to check if the Wireless is enabled in BIOS first then try to install the drivers. Below is the steps to access BIOS and check if the Wireless is enabled or not:
To enter BIOS setup utility, press F2 when the Lenovo logo appears on the screen while the computer is starting up.
NOTE: To check how the BIOS menu looks and to explore its options click here.
Now select “Configuration” Tab and enable the “Wireless LAN Support” by clicking on Enter Key when you are on the option.
Then Click on “F10” Key and then YES to save the changes that are done in BIOS, the computer will automatically restart.
Now check installing the Wireless driver in the computer, but and while installing while installing the driver right click on the downloaded file and select “Run as administrator” option to get it installed without any error.
NOTE: Please click on "Select Product" then in "QUICK PATH" enter the model no. as G580 select the exact model.
Support Drivers & Software downloads
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Why is Internet Recovery stuck at Wifi selection?

I have a Snow Leopard MBP that I upgraded to Lion. There was a problem with my hard disk and my computer stopped starting up, so I erased my drive and then entered Recovery HD. I purchased a copy of Mountain Lion and tried to Reinstall OS X from the Recovery HD through the Internet. It seemed to be working. I left for an hour and a half, and when I returned, I was back at the Utility page (where it lists Time Machine, Reinstall, Disk Utiliy etc.) and it looked like nothing was installed. I force shut-down my computer and restarted, and when I did, I could no longer reach the Recovery HD. Instead, I can only reach Internet Recovery. However, Internet Recovery is stuck with a rotating globe and Wifi selection. I have my Wifi selected, but there doesn't seem to be anything else happening. It's just a rotating globe with my Wifi selected underneath. I will try to use a faster Internet connection tomorrow, but at this point, I am stuck. I may just have a damaged hard drive and will need to replace it, but please inform me if I can do anything else to reinstall my OS.
Thanks.

I think you timed out on either a slow connection or a data cap, some reason like that.
When you try again on a faster connection preferably with Ethernet cable, I think things will bode better for you, if not then it's likely bad hard drive.
As you should know IR will only do Lion, not Mountain Lion.
Once Mountain Lion is installed, it can be reinstalled via Recovery HD, but Lion is installed via IR, this way one can revert the machine back to the OS that came with it.
Obviously the machine came with 10.6, so that's what your supposed to revert it back to before selling, but Apple likely will cut 10.6 off in a firmware update and stop selling disks, thus 10.7 is what one reverts back too, thus why IR does 10.7 and not 10.8
Does it make sense?

Wifi no hardware installed

I had installed yosemite on macbookpro 15inch mid 2009 and after a week later the wifi one day stalled , the computer restarted and a message on the top right read wifi hardware not installed..... i do not understand why... i have read around the google and some say i need to do something with kext files in the extensions and some say hardware may be fault etc. I can still connect with internet with ethernet cable in osx 10.10.1
under network wifi i have this
Software Versions:
CoreWLAN:    5.0 (500.35.2)
CoreWLANKit:    4.0 (400.35)
Menu Extra:    10.0 (1000.33.2)
System Information:    9.0 (900.9)
IO80211 Family:    7.0 (700.52)
Diagnostics:    4.0 (400.68)
AirPort Utility:    6.3.4 (634.17)
i do not know is it the hardware or the software problem? can somebody help?
Mac OS X (10.3.x)
I have this question too Show 0 Likes (0)
Reply

In some cases, this issue is caused by a hardware fault. A loose connection, a short circuit, or a microscopic break in a solder joint may open and close depending on temperature, making the failure intermittent.
Test after taking each of the following steps that you haven't already taken. Back up all data before making any changes.
1. If you can connect to the Internet via Ethernet, Bluetooth, or a USB network device, make sure all available OS X updates are installed. If Wi-Fi is your only means of network access, skip this step.
2. Reset the NVRAM.
3. Reset the System Management Controller.
4. Start up in Recovery mode. In the menu bar of the OS X Utilities screen, there's a Wi-Fi menu. Try to connect. If it works, select Install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
5. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. Apple may decline to service your model because of its age.

I hav installed mac os lion on my MBP 2011 model but it is telling me no wifi hard ware installed what do i do pls suggest me sumthing

i hav installed mac os lion on my MBP 2011 model but it is telling me no wifi hard ware installed what do i do pls suggest me sumthing
so i cannot select my wifi or anything
please tell me what do i do
when i open network prefrences it shows
when i click on "turn on wifi" nothing happens
i have even done a apple hard ware test but it says everything is alright
i am really tensed what do i do pls help me

If AHT doesn't show any issues, your best bet would probably be to take it to the Apple Store. The AirPort (Wi-Fi) card may have been unseated from its original position. If there is a problem with the card Apple should be able to replace it for free.

MacBook Pro 17" Mid 2010 wifi "no hardware installed" fix

Hello,
Wanted to share my "wifi: no hardware installed" fix for my 17" mbp. Story is short - some time ago I noticed that sometimes after sleep there is no wifi. I'm carrying my laptop with me every day in backpack, so it just won't connect to any known network when I open it. Only reboot helped. I tried all available solutions with no luck - no matter what I do, I must reboot it every time I need wifi. Last month it stopped working completely. First, empty wifi icon, I can't turn it off or on. Finally, after reboot it said "no hardware installed". Quick googling points to dead wifi card. So, I opened laptop to see what card I have to order it online. Guess what happen, when I assembled it back? It worked! But only while it was on a table. As soon as I took it with me - it stoped working. So, I opened it again, re-seated cable from m/b to wifi card and that worked again, until next trip in backpack. So, it seems this cable becomes loose and disconnect after some vibrations. Then I put two small pieces of rubber tape (used to seal windows, very soft) on each side of cable. It's high enough to keep connector in its place when you close cover. See attached pictures. Be careful and don't put too much here - otherwise when you close cover it will damage m/b and wifi card.
So, if you're carrying your mbp all the time in backpack and wifi sudden disappear saying "no hardware installed" may be this fix will help. Note, this fix only for mbp mid 2010. I have no idea, what happen in other models. And if you're not sure - take it to service.
Before:
After:

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

After updating to 10.8.1 i can not connect to wifi no hardware installed , it says

When I installed the update to 10.8.1 there comes a message that there was a problem by installing.
Now i can not connect to a wifi network, when i click on the wifi at the bottom
No hardware is installed
Why is there no hardware installed?
Under 10.7 all was fine

I have MacBook unibody late 2008 with OS X Mountain Lion on board. Wifi stopped working suddenly and I spent about four terrible hours to solve a problem.
Actually, none of mentioned and googled advices helped me out to solve this issue with 'WiFi: No Hardware installed'.
Except one thing: using the wifi kext from the Snow Leopard. You may use utility and kext from here: http://rys.sommefeldt.com/2011/09/04/osx-lion-wifi.html
I hope, this can help.

I get a dialogue box asking "What should Firefox do with this file" Options open with or save file. My wife selected save file and now it only opens note pad and displays the text of the file to be saved. OK in windows Internet Explorer.

I get a dialogue box asking "What should Firefox do with this file" Options open with or save file. My wife selected save file and now it only opens note pad and displays the text of the file to be saved. OK in windows Internet Explorer.

P.S. Site is http://www.coldwatercreek.com

Got "wifi: no hardware installed" Problem

this problem had troubled me from 10.6 Snow Leopard to 10.7 Lion
iMac 27" (late 2009)
to be honest
my wifi (airport) can work just fine
BUT
when I "restart" my iMac everytime when I needed (system upgrade or something)
and when I bak to the system
it shows "wifi: no hardware installed" on the upper right menubar
CAN ONLY SOLVE THIS BY
choose "shutdown" , and dont even need to reset SMC or "cmd+option+P+R"
just "shutdown" the computer then press the power button
then the wifi will be back
"Restart" >>>> NO WIFI
"Shutdown" >>>WIFI back to normal

The Google DNS settings should be OK, humor me and change them to
208.67.222.222
AND
208.67.220.220 to see if there is any change. If there isn't go back to the Google settings.

Error when installing Media Sync

I just got my first BlackBerry (Bold with v4.6.0.162) and am in the process of installing the destop software as outlined in this post:
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
I've installed the USB drivers, the Desktop Manager without Roxio Media Manager and was moving on to the installation of the Media Sync tool.
When installing from within the Desktop Manager it stops working and shuts down.
When installing from the downloaded BlackBerryMediaSync.exe file, I receive the following error message:
"Setup could not locate the Software License Agreement information. Setup cannot continue and will now exit."
I'm working with a Dell, Vostro 1510, Vista Basic. I've tried "run as administrator" and also when logged on as the administrator with the same results.
Any thoughts or assistance will be greatly appreciated as I've not been able to track down this problem anywhere.

Hi lighthouse007:
Can you install Media Sync as a stand alone product? (http://na.blackberry.com/eng/services/media/mediasync.jsp)
Does it work if you launch it outside of Desktop Manager after you do this? Does it work if launched from within Desktop Manager?
Cheers
M
Need additional information on BlackBerry products?
visit: http://www.blackberry.net

Trying to install media encoder cs6

Unfortunately, my system runs on Snow Leopard(10.6). I found out only too late that the media encoder CC did not work on that OS.
Now, I am trying to go back to CS6, but I can't because the apps are no longer available for me on my Applications Manager.
The only ones that are still CS6 are After Effects and Premiere Pro. So, if the manager detect that I need to install premiere pro and AE CS6, why does it install Media Encoder CC and not CS6?

I have temporarely solved my problem. I got the Media encoder CS6 folder out of my trash bin and put it back in the apps folder along with the CC version and everything works like a charm.
Thanks anyway!

Installing media encoder on multiple workstations

I attended Adobe Max and I recall being told that - with the purchase of Premiere CS4 - you are allowed to install Media Encoder on as many systems connected to the same network as you want. Does anyone else recall this, or
are aware of how I can accomplish this without purchasing multiple copies of Premiere?
Thanks.

You can install the software on any number of systems. You can activate it on only two systems used the same person but not concurrently. What you bought was a single license with a feature that gives you the flexibility to use it on your office system and perhaps either a notebook or home system when away from the office. You cannot use the other activation for a co-worker's computer or for someone else in your family, etc.
- Dov

Wifi: no hardware installed, after latest yosemite security update

I just applied Security Update 2015-002 (at the behest of Software Update), along with the Command Line Tools (OS X 10.10) v6.2 update, and after the mini rebooted, it now says Wifi:No Hardware installed. And when I go to Network and Hardware in System Preferences, it gives a preferences error. I have tried resetting the NVRAM and the SMC, to no avail. Anyone else have this issue?

In some cases, this issue is caused by a hardware fault. A loose connection, a short circuit, or a microscopic break in a solder joint may open and close depending on temperature, making the failure intermittent.
Test after taking each of the following steps that you haven't already taken. Back up all data before making any changes.
1. Turn off Bluetooth. If you have a desktop Mac, you'll need a wired keyboard and mouse to take this step. Those are useful to have anyway, because Bluetooth is not completely reliable. If Wi-Fi works with Bluetooth turned off but not when you turn it back on, delete all pairings in the Bluetooth preference pane and recreate them. Restart the computer and test again.
2.. There are a few reports that the problem was solved by unchecking the box marked
Wake for Wi-Fi network access
in the Power Adapter tab of the Energy Saver preference pane. I can't confirm.
3. Reset the NVRAM.
4. Reset the System Management Controller.
5. Start up in Recovery mode. In the menu bar of the OS X Utilities screen, there's a Wi-Fi menu. Try to connect.
6. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Wifi no hardware installed since 10.10.1

Hello,
first, forgive me for my terrible english, and my lack of knowledge of the OS.
I bought a macbook air 3 weeks ago, no problem.
I have an iphone 5 too.
Yesterday, Yosemite updated and, when restarting my computer : ni wifi. wifi hardware not installed message.
I live in Japan and have a small wifi pocket thing, that I linked to my computer by usb to see if I would get internet.
I had internet with the usb, but nothing I tried repaired my wifi not installed problem.
I tried detection test : error CNW001.
I tried recovery : other problem, since I am on internet with usb I cannot access to ICloud or my account anymore from my mac. (I read something about en0 and saw mine was en3 but I honestly don't understand what it is about)
so I cannot log in, so I cannot proceed to recovery, so I cannot repair my wifi settings.
I work until late so I cannot reach the call center, and even if so, explanations in Japanese are possible, but I would prefer to get some help in English.
I feel helpless as I don't know anything... so please could someone explain to me with simple words what could I try to do ?
Best regards

The warranty entitles you to complimentary phone support for the first 90 days of ownership. The machine may need to be repaired or replaced.

Install media 2012.08.04 and latest install scripts - the shell

I'm just curious about this: the latest install media uses zsh, the install scripts are bash scripts - the shell you're dropped in after "arch-chroot" is sh (SHELL=/bin/sh chroot "$@")
Why do we use sh in the chrooted environment?

Allan wrote:Because zsh is not installed by default...
I understand, but let me rephrase : why the shell in the chrooted environment is sh and not bash? Isn't bash installed by default?
In the previous version of the install scripts (present in the previous version of the install cd) the chrooted shell was bash, and in Arch "sh" is a symlink to bash (if I understand correctly, calling "bash" as "sh" make bash behave like sh).
So, there's a reason to use sh in the chrooted installation?

Wifi-select on Install media?

Similar Messages

Maybe you are looking for