Wifi settings always changing even after locking help

I HAVE TO RESET MY WIFI SETTINGS EVEY TIME I START UP MY COMPUTER
I LOCK MY SETTINGS BUT EVEY TIME I LOG IN THE SETTINGS ARE UNLOCKED AND BLANK OR ON
SOMEONE ELSES NETWORK 2011 INTEL IMAC 10.7.5
I HAVE REPLACED MY MODEM,SETUP A NEW NETWORK DELETED ALL OTHER NETWORKS TO NO AVAILE
ANY IDEAS?

If you have not done so, read the user manual for the Verizon modem and/or call Verizon tech support. You can also post in Verizon's user to user message boards.
http://forums.verizon.com/

Similar Messages

I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't w

I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't why rhapsody doesn't work anymore?

Contact Rhapsody to see if they have or plan to release an update for the app. Try uninstalling and reinstalling the app. Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

Why won't my line spacing change even after I change the # in the leading panel

why won't my line spacing change even after I change the # in the leading pane

Is this for text you've already typed? Did you select it first? If that's not it, for PSE 11 and 12 go to the far right of the tool options, click the four-lined square and choose Reset Tool. For PSE 10 and earlier go to the far left options bar, click the tiny triangle (or the tool icon for really old versions) and choose Reset Tool.

I'm using lion 10.7.1 and ever since upgrading my preferances are not saved after I shut off the computer. My screen saver is always photos even after changing it, itune always asks if I want to upgrade, even after telling it never to.

When I turn off the computer my preferances are forgot. My screen saver aways goes to photos. Ittune always ask if I want to upgrade even after telling it not to . firefox always goes the upgrade page a progam I have to save my clipboard resets itself.

This does appear to be an issue with synergy, but I've also noticed on my C2D Macbook Pro that the screen does not wake from sleep when I simply touch or move around on the touchpad. Now, I have to hit a button (like return) to get the monitor to wake up. Submitting a button strike through synergy does not work, though. Neither does a mouse click on either the trackpad or through synergy.
It also appears that synergy is functioning even though the monitor is off. My mouse does move to the screen and progress across it (I have a three monitor setup with the Mac in the middle, so I can move it off my left system to my Mac, keep moving, and eventually it will show up on the third screen). If synergy weren't working, I would expect it to go from screen 1 to screen 3.
So I think there's something up with how Lion detects that the monitor should be reenabled, and synergy is even more affected by that decision.

The wifi is always connected even when screen is off.

The wifi is always connected. Earlier the wifi connection used to get disconnecetd after few minutes if phone is not used. I wish which of the settings are to be used so that wifi gets off automatically if phone is not used.

Wifi will turn off, or go to sleep when the phone goes into sleep mode unless the phone is actively using wifi for something, such as downloading. It will remain connected if the device is plugged into power.
What makes you think the wifi is "always connected"?

Router reference keeps changing itself **even after locked

Greetings!
my partners ibook is possessed! We recently changed the router numbers when we got new setups here at the shop and we had to change the router number to xxx.xxx.xxx.3 instead of .1. Every time my partner steps away from his computer for some reason the configuration of his computer reverts back to .1. Every time he sits down to work he has to go through the whole configuration screen where he chooses "manually" and enters his IP address (which always satys the same) and the new router number and then changes it back to "with DHCP" and then the router number is .3. Then he clicks on the lock mechanism at the bottom left of the config screen to stop any further changes ... and then he can get on the internet. But then he walks away for half an hour and when he returns he cannot connect and he has to go through the whole rigamarole again. Why is this happening to him. He is 10.4.11 and it is an ibookG4.
How can we made the settings for that router stay at .3 and stop erverting to the .1?
thanks
YIPES :: kt

New problem now.
Now he can't get onto the internet if we set it up that way.
We change it to manually, we put in the IP address, and the router and he does not have access to the internet. He needs it to do ordering and the like so it is a thing he steps over to at least ten times a day.
BUT
if we go through the whole rigamarole and he changes everything in the "manually" screen and then he changes the drop down menu to "with DHCP" the router address stays at .3 and then he is able to access the internet. BUT it changes after a few minutes back to .1 and he has to do it again and again. He always clicks the "lock changes" button but somehow it still changes.
Is there a preferences pane I should delete somewhere?
kt

IMac Finder crawling, unusable even after troubleshooting. help!

Torturously slow Finder in my Intel iMac 2.16ghz OS 10.4.11.
It can take it over a minute to load basic Finder windows. It can take five minutes to get from command- print to actually printing a photo from iPhoto, running the Spinning Beachball of Death for a minute or two each time something is clicked (drop-down menu, etc). Even trying to scroll, or move a window, brings up SBOD for interminable periods before it responds. Spotlight is slow and unreliable. Very slow to start up, very slow to log in. Again, SBOD between all actions. It's been gradually more slow over a couple months, but now it suddenly became unusable.
Safe Boot doesn't change it at all.
Plenty of free HD space and RAM, those aren't an issue.
What i have done, all ineffective:
• run Repair Permissions and Disk Utility (First Aid). No problems found.
• tossed Finder prefs and sidebar prefs
• tried Safe Boot. NO CHANGE whatsoever.
• tried another user account. It was faster in some tests i did, such as iPhoto operations, but that user has only a fraction of the files. And there were still random inexplicable Finder slowdowns while loading Finder windows etc., slow to quit apps, etc... just not as bad as in my User.
• removed all startup items from my login, which was all 3rd-party stuff.
• since slowdowns seem to have started with a Lexmark wireless-network printer install a few months ago, i trashed everything i could find having to do with lexmark (the printer was junk and i got rid of it within 6 weeks anyway).
• I updated the Wacom Tablet driver that i know was outdated (however, i don't have the tablet hooked up).
• i disconnected off all non-essential peripherals- everything except the keyboard ( a MacAlley, with an apple mouse) and the DSL modem.
• Tried Safe Boot again after all of above. No change.
i watched Activity Monitor. Very little CPU usage shown at any given time. However, during the slowdowns, Monitor shows "not responding" for relevant applications i've tried to do something in, including Finder and also something called "System UI Server". Eventually, the app responds and the "not responding" goes away in activity monitor.
other details that may be relevant:
• this iMac sometimes freezes up with what looks like a logic board/graphics chip problem... suddenly video goes awry and clusters a lot of fragmented graphics at top of screen, with rest of screen black. The only way to recover is a hard shutdown, either by holding the power button down or unplugging it.
I really don't want to have to re-install the OS if not necessary, as my install disk is 10.4.3 and i'd have to re-update it all the way to 10.4.11 (i have found i have to do a couple intermediate combo updates to avoid problems).
Do y'all think this is an OS problem, a hardware problem, or what?
Suggestions of what to do now?
PS, urgent, cuz i need to print (or at least export to a flash drive, to move to my iBook) a bunch of images i need for a studio tour.... tomorrow!

What if i boot this clone on my laptop (a G4 iBook with the same amount of RAM) and see how it runs?
Intel iMac 2.16ghz, iBook G4 1.3ghz
Won't work, unfortunately. The clone carries an Intel-specific version of Tiger, which won't run on your PPC iBook.
And if i boot from the clone on the iMac and it runs fine (or, at least, as it was running when the backup was made), that would specifically incriminate the iMac's hard drive, not its other hardware, wouldn't it?
Yes, and so potentially a good diagnostic tool, but I'm not sure it would be totally safe. If the problem is instead bad RAM in the iMac, and you ran the clone from there, I think there would be a chance that the clone could become corrupted. You would then lose your only backup.
It would be nice if there were an "extra" external drive available. That way you could use the iBook to make a second identical "test" clone on it, using your current iMac clone as the source. You could then boot the iMac from the 2nd clone as you proposed, without fear of losing your only backup.
Regarding your install DVD(s):
Intel iMac 2.16ghz OS 10.4.11.
This machine came with grey machine-specific DVDs, I believe 10.4.7 or later.
All i have is my 10.4.3 full retail install DVD.
That is PPC specific, as well as being an earlier Tiger version than the one that came with your machine. It will not re-install Tiger on your Intel iMac.
Disk Utility says HD has no problems (run booted from DVD).
I'm surprised at this. I didn't think an Intel mac would boot from a retail Tiger DVD even just to run Disk Utility.
I'd suggest obtaining the original install disks for your iMac even if you eventually install Leopard. They contain the Apple Hardware Test, and also the original bundled software set, should you ever need to re-install these. Unlike retail DVDs, they should be inexpensive - call Apple and ask; have your serial number available.

Updated to ios6 lost wifi still not working even after resetting networks?

I've tried resetting the networks and changing the HTTP proxy to auto but no iphone users in my office have wifi connectivity after updating.

My suggestion is to see if Verizon will let you treat the modem as a simple modem and attach your own router to it.
I've found these Westells a pain to setup, and it took me once 2 hours to get through to a Mac specialist on Verizon's end to finally get the right setup on a customer's machine. I don't know that customer's number anymore unfortunately since this was a couple years ago.
Message was edited by: a brody

Photos Missing Even After Rebuild - Help!!!

My iMac crashed after a software update around 10.6.8. This machine is still running 10.6.8.
I had to restore the entire system from Time Capsule.
I am now missing hundreds, if not thousands of photos, from my library of about 35,000 images. All I get is an exclamation mark.
I have rebuilt the library using iPhoto Library Manager and it lists a bunch of images and videos that it can't find.
I can see the meta data from the missing photos (camera, f-stop, iso, etc) but can't see the images as thumbnails or even in the "edit" menu.
I upgraded to iPhoto 11 to see if that would help.
I would be SUPER GRATEFUL for any help! Since this is my Time Capsule back-up that has the corrupt files, I don't have a back-up of the back-up (I WILL NEXT TIME!).

Give the following a try to see if the Masters folder in your problem library contains all of your files even though they are not being recognized by iPhoto:
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects.
If this brings back all of your photos you can start using it but still try other fixes on your current library in hopes of recovering metadata and projects.
OT

I'm having trouble with my iphone4 connecting to my home wifi - nothing has changed so, I need help! Thx

I'm having trouble connecting to wifi. It doesn't recognize any of the networks I usually connect with, including my own. Can anyone help?

Try reboot your router, update router firmware from the manufacturer website.
In iPhone's Settings > General > Reset > Reset Network Settings.
Try reconnect again to your Wi-Fi.
Lastly, do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.

Google Search Settings Not Saving Even After Reset

Hi. I've reset Safari (which also emptied the cache) but still the search settings for Google won't save, although Google says it had saved it. It keeps returning 10 results but I set and saved it to 100 results (it even confirmed that it was saved). When I set search setting again, it's back to 10 results. I'm using 10.6.5 and a late 2009 iMac i7. Thank you in advance.
Gbu.

I wonder if it's a Google search bug itself?
seems so - I get the same thing across browsers, even with the number clearly shown in the page url.
but go to the UK site: http://www.google.co.uk/search?q=aa&hl=en&num=100&lr=&ft=i&cr=&safe=images
and you get a hundred, and the preference sticks in the cookie, as it should. There's likely another .com one that will work, but also likely they'll fix it soon.

Hi this is aruni chakrabarti, icannot connect wifi to my ipad even after following the steps of the article

http://

Hi Aruni,
If you are having WiFi issues on your iPad, you may find the following article helpful:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Regards,
- Brenden

N8's screen doesnt turn off even after locking!

I dont know if someone has reported it here but will like to report it here.
Sometimes, when i restarts my N8 and lock it, screen doesnt dim or turn off, though screen is locked and there is key symbol on the top. To get rid of this I have to restart phone and how many time, that depends on our luck! This is serious man, I cant keep my screen always on! Expecting quick solution from Nokia. Does anyone here is having same problem? And does anyone has better solution?

thanks to G8ZoST :
i've also having the same problem.. but now the problem was clear by G8ZoST idea.. i agree G8ZoST say the correct solution for this problem.. thankz lot

OS X Yosemite WiFi Still Sporadically Disconnecting Even After Update

I have a late-2013 MacBook Pro Retina. I've had Yosemite on it for a while now, and am now only facing this.
I know a lot of other people in the community have had this issue, and I know there was a recent update that fixes it, but it's just not letting up.
There are moments when I find myself turning the wifi off then back on again, only for it to work for a few seconds. Sometimes it just doesn't want to connect at all. I updated it recently, but the problem still occurs.
I've tried everything from SMC/PRAM resets, verifying/repairing my HD, deleting the system configuration files to no avail.
Is there anything I can do before I take it into the Apple store?

Wi-FI connection drops
Wi-Fi Problems in OS X Yosemite
Wi-Fi Problems in OS X Yosemite (2)
Wireless Diagnostics
Also try turning off Bluetooth.
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)

MSG_WAIT_ACK state not changed even after ACK from TP received

Hi All,
We send payload to TP using RosettaNet v2.0 protocol. Our TP also responds with successful ack, but the business message state(outbound for b2b) is still in MSG_WAIT_ACK. We see a row (inbound to B2B) with the ack details(sender: TP name, receiver: Host name, doc type: ack) also in our business message report.
Please let me know what would be the issue.
Thanks.

Hi Anuj,
Thanks for your reply. Refer to Message link is enabled in the business message of Ack. The collaboration id given is: PIP0AA0652813E6C026594000001647E4DC
after clicking the Refer to Message, its taking us to the correct request message and the collaboration id present there is :PIP0AA0652813E6C026594000001647E4DC
In the Wire message tab, this Request message is still showing as "Processing" instead of "Complete". the TP has received the request and have ack'ed back too.
Thanks.

Wifi settings always changing even after locking help

Similar Messages

Maybe you are looking for