Wifi signal from Airport Extreme doesn't reach all areas of my house. Is there a way to extend it without sacrificing bandwidth? Airport Extreme version 7.6.1
The wifi signal from my Airport Extreme doesn't reach all areas of my house. Is there a way to extend it without sacrificing bandwidth? I have an Airport Extreme running version 7.6.1.
You will need to add another device like an AirPort Extreme to provide additional wireless coverage in the house.
The only way to preserve bandwidth on a network would be to connect the two AirPort Extremes using an Ethernet cable connection.
While you can "extend" using wireless only, typically half of the bandwidth on the network is sacrificed when you do this.
Similar Messages
-
8,000 miles from home. No OS disks, Is there a way I can reset administrator password without OS disks? thanks lynda
If you can access the Web*, try this link: http://en.kioskea.net/forum/affich-73393-change-mac-admin-password-without-the-d isk
Caveat: not tried by me.
* I assume you have Web access because you posted here. -
How can I transfer a game and game files (Minecraft) from my iphone to my grandson's new ipod touch. Do I have to restore the ipod from my iphone or can I just transfer this one game (plus files).
Back your device via icloud and restore on other ipod via icloud.
-
My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.
Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/ -
How to setup a wrt54g router as a wireless access point to extend wifi signal from e3200
how do i setup a wrt54g router as a wireless access point to extend wifi signal from e3200 which is broadcasting the internet?
everyone keeps saying to remove the stock firmware and instal the dd-wrt firmare to do this. can i do this with the stock firmware?
any tips to avoid interfearance once setup?You have to connect both with a cable.
-
I cannot get a WiFi signal, which means that I cannot access all of the other features on my ipod. Is there anyway I can access all of the other features without Siri or WiFi?
Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
BTW Apple doesn't offer free support for this kind of issue with iTunes.
tt2 -
Wifi not reaching all rooms in the house
Why won't my wifi reach all rooms in my house? Bought an extender, wifi still drops frequently. Very frustrating.
actually i dont hv much knowledge abt networking. i dont know the difference between bridge, access point, repeater.
wat i want is that my current wifi router range is not reaching in all the rooms of my house so i want to extend the range so that i can use internet and share files and printers from all the rooms of my house.
so u only suggest me wat shud i opt for?
on many websites it is mentioned that wrt160nl can b bridged wit any brand router. and also it is compatible wit third party firmware like dd-wrt. with which its quite easy to use it as client bridge.
but as i told u i dont hv much knowledge so there is a big question mark in front of me????
plz suggest some easy cheap n useful solution -
I am having trouble sending an audio signal from my computer (mac pro early 2009) to my TV. Is there some interface or adapter that allows /enables the audio input from my computer to be sent to the TV (R,L signal?) any suggestions
just the audio, eh?. If you were using DVI or DisplayPort that might be different, but for audio alone, it shouldn't be that hard. Just grab a 3.5 mm stereo plug to 2 rca cables adapter. Plug the smaller end into the back of your Mac Pro (or the Front), where you see either the headphone or speaker icon). Alt-click on the speaker icon at the top of your screen to show all audio inputs and outputs. Make sure it's set to Line Out. Plug the red and white end into the audio in jacks on the back of your tv and set it to the correct input. I don't know if your tv will allow just the audio to play. Usually one has to connect up something else, but hopefully I'm wrong. If you were using DVI, or DisplayPort, you'd need an active DVI--HDMI adapter or a DisplayPort to HDMI adapter, but
I don't know for sure
J B -
My computer broke and I got it fixed. It doesn't say that the hard-drive was replaced, but I can tell my data is gone, including Pages that I bought. Is there any way of getting that without paying for it again?
Or if you purchased Pages as part of iWork on a disk, reinstall from the same disk.
Best of luck. -
i updated to maverick, and maybe it's a coincidence but my left shift key doesn't work unless i really press it down. Is there any way to fix this without bringing it into the Genius Bar?
Plugins usually are installed externally to Firefox. However, you can disable them in Firefox so that Firefox does not use them.
SearchReset is supposed to automate the task of resetting certain preferences, but you still can edit them manually if necessary.
'''''Address Bar Search'''''
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''keyword''' and pause while the list is filtered
(3) Right-click '''keyword.URL''' and choose Reset. This should restore Google as the default for address bar search.
Does that work?
'''''Search Box'''''
Usually it works to choose your preferred search engine from the drop-down. To remove an unwanted search engine plugin, usually the Manage Search Engines... choice at the bottom of the drop-down takes care of it.
Do either of those work?
There might be another way to hijack that search box; I think some of the other frequent responders probably are more familiar with it than I am. -
I have downloaded a Audio Book from Itunes Store, but rencently i have had to reinstall windows, is there any way to re-download the audio book from Itunes, i know that the audio books are one time downloads, but is there any way to get the audio book back as i have already paid for it once and i would not like to pay for it twice.
If you haven't got a backup copy and if it's still in the store then you can try contacting iTunes support and see if they will grant you a re-download (there is no guarantee that they will) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?
I suggested contacting Compub in Nassau St as the info is priceless and worth the trouble of trying to regain?
Any thoughts? The poor lady is very distressIf she has backed up her iPhone she can replace that iPhone and set up the new iPhone from her backup.
You can put the iPhone that went into water into a plastic baggie with either new silica gel packets (preferred) or raw rice and let it sit for 4 - 5 days. After that time remove the phone and connect it to power for at least a half hour. While it is still connected to power reset it by holding down the power and hold button, wait for the Apple logo then let go of the buttons. Might take several tries. If it revives immediately back it up. -
So I need to buy a TV series on my family's account, and we want it just to charge the credit card and not the money from an iTunes Card that's already on the account. Is there any way to do this?
I am pretty sure it will always use the credit card unless payment method is set to none.
That has been my experience anyway.
They already have the money from the gift card so would rather collect from your credit card. -
With 10.7.2 update iCal does not allow you to set "Reminders" by draging events from "All Day Events" into "Reminders" is there another way to do this instead of having to type out the entire reminder with date, time, and type?
With Lion 10.7.1. you where able to drag events from "All Day Events" into the "Reminders" bar to create upcoming reminders.Exactly the same question I was about to post!
Great being able to sync reminders (well overdue) however if I have to re-type a calener envent into reminders it's a waste of time!!
Come on Apple!!
Just need an option for the calender event to add to reminder or the old drag to add to reminder functionality back, Please??? -
Someone had my apple id password and bought a game from the App Store. I've changed my password but is there any way to find he number it was downloaded to?
Contact iTunes support
Maybe you are looking for
-
Printing page numbers in report
hi, I want to print the page numbers in report in a format of PAGE 1 OF 10 PAGE 2 OF 10.... can anybody help me in this thanks in advance. neha.
-
Add the carrier description/name on a sales order
On sales order in Tax tab when a carrier is selected, it´s only shown the field with carrier cod without his description/name. How can I add the carrier description/name on a sales order?
-
Update Property Promotion Column Value in InfoPath Document Library
Hello All, I just tried to update a property promotion value using this code: using (SPSite site = new SPSite(webName)) using (SPWeb objweb = site.OpenWeb()) SPList spList = objweb.Lists["XYZ"];
-
All in one C4580 asks 'where do you want to save?
Had lots of problems with this printer. Most sorted. Now the document is sitting in the print queue but a pop up message asks where do I want to save the document to? I have saved it - deleted original and resent but same message appears. Any solu
-
How can I copy all of G/L accounts from one company code to another company code?