Wifi state not remembered across reboot after recent upgrade

After a recent upgrade, I noticed that the wireless network is always on after the computer boots (I use NetworkManager in gnome, which I always use to turn the wireless off). Before that, the wireless is on only if I left it on before I shutdown the computer last time.
Are there people who are having similar symptoms or know the cause?
(I have a Broadcom BCM43142 card and use the broadcom-wl driver)

May start my own thread, but I'm having similar issues.
I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
• restart Apple TV
• restart Macbook Pro
• quite iTunes/open
• turn off Home Sharing on iTunes then reconnect it
• unplugging and cycling both my modem and router
None of these have alleviated the problem.
The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them.

Similar Messages

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolutio

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolution from the community, but hope to get the attention of Apple engineers. If you are having same problems or have a miracle cure I am all ears.

May start my own thread, but I'm having similar issues.
I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
• restart Apple TV
• restart Macbook Pro
• quite iTunes/open
• turn off Home Sharing on iTunes then reconnect it
• unplugging and cycling both my modem and router
None of these have alleviated the problem.
The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them.

[SOLVED] netcfg static IP not persisting across reboots in VM

I ran into an issue with netcfg static IP not persisting across reboots in a VM. I figured it out, but it took me awhile as a brand new user, so I thought I'd post it.
Setup
Using VMWare Workstation 8.0.3 build-703057 with bridged networking
Host OS: Linux Mint 14 64-bit
Guest OS: Arch Linux 2013.03.01 x86_64
Given a fresh install on the guest, setup netcfg:
cd /etc/network.d
cp examples/ethernet-static ./myprofile
nano myprofile
# customize this file. I also added NETMASK='255.255.255.0'
systemctl enable netcfg@myprofile
systemctl start netcfg@myprofile
Test the configuration. It should be successful:
ping google.com
Problem
See if the changes survive a reboot.
reboot
ping google.com
I got the error "connect: Network is unreachable".
Check the logs:
journalctl
G
I found the following netcfg failure..
[email protected]: main process exited, code=exited, status=1/FAILURE
..prior to the following device initialization:
kernel: e1000 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection
system-udevd[117]: renamed network interface eth0 to emp2s0
Solution
It looks like netcfg is being started before the device it depends on has been initialized. Inform systemd of the
dependency so they start in the proper order:
# nano /etc/systemd/system/multi-user.target.wants/[email protected]
# Add the following to [Unit]. Remember to replace enp2s0 with your device name.
Requires=sys-subsystem-net-devices-enp2s0.device
After=sys-subsystem-net-devices-enp2s0.device
Test again:
reboot
ping google.com
This should now be successful.

fukawi2 wrote:
$ man netcfg-profiles wrote:
Miscellaneous options
IPCFG
Array of arguments to pass to ip. The power of this options is
that it allows both simple and complicated routing
configurations, within the framework of netcfg.
SKIPNOCARRIER
‘yes’/‘no’. Don’t abort interface setup if no carrier is
found.
Thank you, [Solved].

After recent upgrade to IOS 7 i an seeing systems rebooting very frequently. it just goes offline and comeback online after some time. IS this hardware issue or others also facing the same

After recent upgrade to IOS 7 i an seeing systems rebooting very frequently. it just goes offline and comeback online after some time. IS this hardware issue or others also facing the same

Hello there, Kishoresaraogi.
The following Knowledge Base article provides some great steps to troubleshoot your issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Particularly:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Wifi will not remember my password on my iPad 4?

Wifi will not remember my password on my iPad 4?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT1277 After recently upgrading my desktop I can no longer recieve emails from my IMAP account it continues to come up with password incorrect yet I have not changed it - HELP!

After recently upgrading to Maverick my desktop computer and all other devices will not recieve emails from my IMAP account, it keeps asking me for a password which has never been changed in 8yrs, please help as it was my business account from so long ago and I use it for general 'stuff' and my 'me' account for personal
Cheers

Since it is affecting all your devices also, try going to the e-mail web site and seeing if you can log in there. Who is the e-mail provider?
Try deleting the pass word from Applications/Utilities/Keychain Access.
If that doesn't work, try deleting and adding back the e-mail account.

After recent upgrade Mozilla will open but does not connect - I have Norton Antivirus.

After recent upgrade Mozilla will open but does not connect. I have uninstall/reinstalled several times. I have NortonAntivirus.

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

Motion is not remembering any of my recent projects.

When I open apple motion, it does not remember any of my recent projects. Everytime I want to open a project, I have to go find it in the folder. Fortunately, all of my projects are in one folder, but it is a drag to have to go pull it up everytime.
Thanks
AJ

I'm having the same problem.
I downloaded Preference Manager & trashed Motion 5 preferences.
I restarted Motion5, the preferences were obviously trashed as the dialog to "Create New Project" which I had previously set to not show, showed.
I opened the last project I worked on; close and re-opened.
And still nothing in the "Open Recent" menu.
Even worse, I didn't realize that the setting "At Startup" has a choice to either create new or "Open Last Project".
I'd actually forgotten I'd set that, because of course, it doesn't work either.
If Motion5 doesn't remember any of the most recent projects, it can't open the last one edited.
So basically it still doesn't work.
It's never worked and I've done more permission repairs and checks I can think of.
I even had my hard-drive replaced recently (more or less irrelevant to this problem) - but that didn't change anything.
I'm starting to appreciate the Windows registry just a little more. It must be complicated stuff writing a list of strings to a plist file.

Flash Plug in is crashing after recent upgrade. I tried uninstalling, and reinstalling, still crashing. Firefox and Plug-in are current. What else can I do?

Flash Plug in is crashing after recent upgrade. I tried uninstalling, and reinstalling, still crashing. Firefox and Plug-in are current. What else can I do?

What I suggest you do here is to use Adobe's uninstaller tool to uninstall Flash first of all: http://kb2.adobe.com/cps/141/tn_14157.html
Then reboot, go to http://get.adobe.com/flashplayer/ and reinstall it.
I notice too that you have an outdated version of Shockwave For Director. You can update that via http://get.adobe.com/shockwave/

Can not send e-mails after iOS5 upgrade

I upgraded my wifes iPhone to iOS 5. After the upgrade she can receive e-mails but can not send them. All the composed e-mails end up in her outbox. I click on the error and it says "The connection to the outgoing server "smtp.***.com" failed. Additional Outgoing Mail Servers can be configured in Setting>Mail, Contacts, Calenders."
Anyone have any suggestions?

Go to Settings => Mail,Contacts,Calenders => select the account and may have to click account again => should be viewing username and password, Scroll down and Select - Outgoing Server => Tap on Primary Server => try entering Username and Password in there even though it says optional... Also try port 25 if that doesn't work and try toggling SSL on/off if that doesn't work.

Keyboard not visible in whatsapp after I upgraded to ios7. I have to type on the chat to get my keyboard visible. This is a bug :( poor testers..

Keyboard not visible in whatsapp after I upgraded to ios7. I have to type on the chat to get my keyboard visible. This is a bug poor testers..

Hello dhiliptcs,
It sounds like the WhatsApp app on your iPhone does not have a visible keyboard. I recommend following the steps in the article below for an issue like this (you can skip step 3 since it is not related to this issue):
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Thank you for using Apple Support Communities.
Best,
Sheila M.

I'm running OS X 10.5.8 & Firefox says that my computer is not compatible with the most recent upgrade. What am I missing? Thanks!

I'm running OS X 10.5.8 & Firefox says that my computer is not compatible with the most recent upgrade. What am I missing? Thanks!

The last version of Firefox which is compatible with PPC architecture is Firefox 3.6.x. 
http://www.mozilla.com/en-US/firefox/all-older.html
For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . 
http://www.floodgap.com/software/tenfourfox/
http://tenfourfox.blogspot.com/

After recent upgrade i lost the contacts icon on the screen

after recent upgrade i lost the contacts icon on the screen

Before doing a Reset (which will wipe out a whole lot of things that you have to reenter) check to make sure the Contacts app didn't simply get pushed to another page by the addition of the Newstand app to the first homescreen.

Lost all sounds except ringtone after recent upgrade

No sound except ringtone after recent upgrade followed by the upgrade fix. Since the ringtone was only affected I didn't notice immediately! If I plug in my headphones everything works. Unable to use volume buttons on side unless headphones are plugged in, the volume symbol with white dots doesn't even appear anymore. The volume control in itunes music only works when plugged into headphones otherwise it can't be adjusted. Worked with apple support tried everything include a restore to new still no go! It appears that a few people are having the same problem and seems weird that it happened after last upgrade!

If you are unable to adjust the volume without headphones even after restoring, then the iPhone thinks it's plugged into a dock or cable. This is the behavor that will happen if you plug your iPhone in to the car or iHome dock to play you music and sounds, but a docked connection will never play ringtones through the dock connection and headphones override that dock connection which is why your headphones work.
How does the phone think its connected to a dock? Well, this can happen if the charging port gets wet at some point or if some trauma happens in there like pushing the cable in when it doesnt fit, etc.
So it happens even after restoring what do I do? Service your iPhone. https://selfsolve.apple.com

Library panel folders state not remembered

I am using LRM3 on Win 7. LRM does not remember the state of the folders in the panel when I re-open the application. For example if I have my folders organized by year. I open 2004 browse to some file. Then I close the folder tree at 2004 and then open 2007 and select a sub folder. I then close the application and reopen it. It shows both 2004 and 2007 folders open even though I shut (collapsed) the 2004 folder before quitting the program. This can be quite annoying when you have lots of folder as the folder with focus, i.e. 2007 subfolder is way off the bottom of the screen. Does everyone have this problem, i.e is it a feature or a bug?

rgb964 wrote:
I have a similar problem with LRM3 on Mac OS X 10.6.3. But it's even worse. Not only does Lightroom insist on opening three of my top-level folders when it starts, it does this every time I perform an operation that affects the file system. For example, with all folders closed, I open folder X, and rename X/OldName to X/NewName. Upon confirming the change, folder X/OldName changes to X/NewName, but then A/ B/ and C/ all open. I can't tell you how much time and mouseclicking this has wasted for me.
I've tried your Alt-Click method for closing the folders, however that doesn't help. A/ B/ and C/ always open at startup and anytime I modify the file system. I've even totally uninstalled Lightroom and re-installed, but that didn't help. Whatever the problem is, it must be in the catalog. I verify and backup the catalog every time I quite Lightroom after doing real work.
Any suggestions from anyone?
OK, I've fixed my problem I hope. After uninstalling and re-installing LR3, I created a new catalog. Then I imported all the photos from my previous catalog using "Import from Catalog..." This took an entire evening. Then I shut down Lightroom. I have it set to backup every time I shut down, and I always set it to verify and optimize the catalog. The backup took quite a while also. Now, my three folders that always opened on startup and anytime I touched the file system all stay closed under those circumstances.
Curiously, my installation of Lightroom still does not remember folder states. It now always starts with all folders closed, even if I left top-level or subfolders open when I shut it down. But this is fine with me!

Wifi state not remembered across reboot after recent upgrade

Similar Messages

Maybe you are looking for