Wifi suddenly not working with new networks?

This is already my second iPhone 5, since the last went into warranty because, ironically, of a wifi problem.
The other day, I was just minding my own business when I decided to try to connect to the local wifi of the place I was at the time, and it wouldn't connect. It would find the network, I would put the given password in and it just stayed there. The keyboard would disappear, like it normally would, but instead of returning to the wifi menu in the Setting app, it just stays there saying "Connecting to "X" network..." and nothing happens, unless I do either thing: if I tap the Home button and go back to Settings, it brings me back to the wifi menu, still unconnected; if I drag down Notification Center or bring up Control Center and bring them up/down again, a pop up shows up saying "Can't connect to the network". Apparently, this is to new networks, since when I got home, it automatically connected to my house's wifi. On the spot, I tried reseting everything from factory, and try to connect to another wifi nearby, since I had a copy of my phone on iTunes, and it worked, and when I came back to that same wifi, it didn't but I scratched the option that it was that router problem, because now I'm at my other apartment in the capital, and tried to connect to wifi (since I reseted everything and had no password saved automatically) and the same thing happened.
Help me out here, I'm going insane!

Turn off your router, wait ten seconds and turn it back on.

Similar Messages

  • IPX not working with new Network Configuration

    Here is my situation. I have been engaged with a customer that had the following equipment.
    1x 3640 Router running IOS c3640-d-mz.121-3a.T1
    1x 3550 L3 Switch running IOS 12.1.15 EMI
    8 x 3548XL L2 Switches running IOS c3500xl-c3h2s-mz.120-5.WC13.bin
    When I was asked to look at the network they were experiencing slow LAN speeds (10.8MB file between two LAN hosts around 12 minutes). This network consisted of 10 Class C networks 10.5.60.x - 10.5.69.x, these networks were based on the 3560 split between two interfaces. Odd ranges on FE 0/0 and Even on FE0/1. The router was acting as a stub router on a T1 from the client’s core network provider. This core provider has IPX services that my client has to be able to use. Under the old design there was no VLAN structure and basic network services such as DHCP barely worked.
    Now the network is configured with the 3640 router as the edge routing device and the 3550-48-EMI is configured as the LAN routing devices. I have split the 10.5.60.x range in two using the lower segment for VLAN 60 and using the upper range as the communication network between FE 0/48 on the 3550 (ip addr 10.5.60.130 255.255.255.128) and FE 0/0 on 3640 (ip addr 10.5.60.131 255.255.255.128), these interfaces are connected via an ISL Trunk. Each VLAN is set at the 3550 with the gateway of 10.5.x.1. Each of the 8 3548XL switches is configured with all of the VLANS and are linked to the 3550 via 100 BaseT and 1000BaseT interfaces configured as dot1q trunks. Multicast routing is enabled on the 3550 to allow services like MDNS and Imaging to occur across VLANS.
    With all this said IPX is not working. My 3640 edge router is still seeing all of its upstream IPX servers and networks. This router also sees the local IPX network as connected out of FE 0/0, based on this config setting (ipx network 1368023) FE 0/0. I'm guessing that this piece of the puzzle is based on my L3 changes on the LAN. But I just am not able to wrap my head around what it is. Any help that could be offered concerning this issue would be greatly appreciated.
    Whatever the solution is it needs to happen with no more hardware and this new structure has to stay in place. I have been able to fix all ip network services such as DHCP and the customer reports a 1013% speed increase from the point when I first arrived. The 10.8 MB file mentioned above now transfers in about 8 to 10 seconds across the LAN.
    Again Thanks.

    I was pretty sure of that. Is there anyway to tag the IPX traffic to a VLAN from the 3600 as described in http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t1/ipx_vlan.htm Which so far hasnt worked...
    Or is there a way that I can simply use broadcasts at a L2 level to accomplish connectivity? This was working like a charm under the bad network configuration that was purely L2 and 10 subnets drapped accross two router interfaces. It seems like there should be some sort of simple fix I'm missing.
    Otherwise is there a way to have the VLAN clients talk up to the 3600 in order to get IPX information? In the end this is a short term fix. 3 weeks from now the IPX app is being replaced by and IP app. But I need it for 3 more weeks.
    Thanks,
    Josh

  • HT4623 my voice call services is not working with cellular network...only works fine with wifi..please help?

    my voice call services is not working with cellular network...only works fine with wifi..please help?

    Since you have already done some sort of reset on your Airport Express, you might as well make sure it was a "hard reset" - follow the instructions for a hard reset found at:
    http://docs.info.apple.com/article.html?artnum=108044
    Since your Mac is running Leopard, you need to configure the Airport Express using the Airport Utility found in the Applictions->Utilities folder. You cannot install the old software that was supplied on the CD you got with the Airport Express.
    In future - if you do something bad with network settings on your Mac, do NOT try to fix it with the Airport Utility. The Airport Utility is only used to configure the Airport Express - and since the problem you have created is on the Mac and not the Airport Express, there is no need to be using the Airport Utility and especially there is no need to be resetting the Airport Express.

  • Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

    Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

    Please check the Play Store app for any Flash updates and install them if present.

  • Home sharing does not work with new mountain lion update.

    home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

    Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
    If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
    My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

  • Line-in not working with new driv

    Has anyone else had issues with the line-in jack not working with new drivers? Is there a way to get it to work??Very frustrated. Is there a link to the beta drivers, they worked better for me then the new one.

    The line input on the mini requires a 'line-level' signal, so the only microphones that work are ones that have an amplified output. Standard mics don't generate enough voltage to drive the mini's amplifiers.
    That's the reason the mics work with the Griffin device (it has an amplifier) but not the mini directly.

  • Zen Micro Photo not working with new XP SP2 install

    Okay so my Zen Micro Photo stopped being recognised on my computer about ten months ago when I upgraded to WMP (for BBC iPlayer - it's compulsory to have it). Anyway I li'ved with this and have now got thoroughly sick of the same songs and nothing new so I have done a fresh install (on a brand new hard dri've) of Windows XP SP2 WMP9 with the sole intention of using this install/hard dri've?for the player. I used the original installation disk and it prompted me to upgrade to WMP0 as I installed everything. There were no errors during the install and I rebooted when prompted to.
    When I attach the player it is recognised by the machine (task bar icon and correctly labelled in System > Hardware > Device Manager which reports it to be?working okay) but the Creative media software says "player not attached" when it is. It is not visible on My Computer as a dri've so I STILL have no access to the player. Player screen reports "docked" with a logo and is flashes a charging icon. Driver v5.2.0.0. The player plays fine but hasn't had new music on in almost a year
    There is nothing else on the XP install (IE6 and everything - argh!) I did the registry permission tweak thing mentioned?here:?http://support.creative.com/kb/showa....aspx?sid=9287?but it didn't do anything.
    Any help greatfully received!

    Re: Zen Micro Photo not working with new XP SP2 install. Have you installed this plug-in?
    Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer
    Filesize : 27.9 MBDownload

  • Satellite A110 - WiFi switch is not working with new WiFi card

    Hello Everyone
    I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working.
    New wifi card is discovered and drivers working correct but when I try to scan for wifi networks with IntelPro/Wireless software I have message to turn on hardware switch but it's turn on and not work. On old wifi card swich is working correct - orange light is on. On new card light is off and swich is not working.
    Please help

    Hi
    Maybe you could enable the Wlan card using different way;
    Go to device manager -> WLan card properties -> Advanced tab
    There you could check if there is a option which would enables the WLan.
    Its worth a try
    Otherwise its a compatibility issue like suggested by PinkPanther
    I read in different threads that this could happens if there is a different pin assignment on miniPCI WLan card and this could not match with the miniPCI slot on the mobo...

  • Gmail suddenly not working with Apple Mail

    My gmail suddenly is not working with Apple Mail.
    It said my username or password is wrong, but it was okay this morning.
    Nevertheless, I deleted my gmail account, and re-setup it using Internet Accounts from System Preference.
    However, I got the beow message:
    There was a problem setting up the Mail account. An unknown error occurred.
    I am sure my username and password are correct because I just login it using Safari.
    Does anyone know what the cause is?
    Please help~~~

    Gmail not syncing in mac mail is a problem that is also in snow leopard since the new year.
    OSX 10.6.8  is the highest OS that will run on an Intel Core 2 Duo.  Do not try to install Mavericks on this machine! I will install, but turns it into a dinosaur and many programs will no longer run.
    I had an issue with Mac Mail not syncing with imap.gmail.com. and Safari not being able to find apple.com.
    This was resolved by working with an upper level tech support member for several hours deleating particular system library files, uninstalling most addons, reseting system network settings and a whole lot more! (too much to name here)
    Thank you Apple Tech Support.

  • Printer not working with new router

    I have a new router and my laptop with Windows XP is working Ok
    My printer Deskjet 3520 network test result shows successful setup But it does not print when laptop requests
    What can I do

    Hi @Jobrig,
    Welcome to the HP Forums!
    I see that your HP Deskjet 3520 is not working with your new router, and I am happy to help with this connection issue!
    For further assistance, I will need to know: if you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos, and if the printer is able to make copies.
    In the meantime, please see the following:
    This printing guide, Print Jobs are Stuck in the Print Queue.
    This website, HP Wireless Printing Center, may also help.
    Hope these guides will help you, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Airport express not working with optus network

    Hi there, the airport express seems not working with my optus network. It is keeping me I cannot access the internet but I do have a wifi signal. Initially I thought there was some problems with Enhernet Wan port on the AE, but after I've done some research I found there might some changes needed to be done with my old router. All I know is im using a NETGEAR router, network type is PPPOE. Also, there were people metioned on the forum that theold modern should be changed to brigdeging mode. I have no idea what is it. Please help. cheers.

    Configuration is simple if you start from a factory default condition.  Then connect the Airport to AC power and finally to the Internet modem (or modem/router).  Open Airport Utility on your Mac or other computer and accept all of the recommendations.  After confirming that it works, insert your desired administrative and WiFi passwords.
    Do not expect the Airport to respond instantly to the configuration commands.  BE PATIENT!

  • TS1559 why are 4s's not working with new software and apple won't come good

    I have a iphone 4s with the new update is making my phone slow and the wifi is not working. 200.00 to fix it. I have apple laptop, desktop, 4 iphones two 4s and two 5c's and they will not fix what their update did to my phone. Any feed back to help resolve this would be appreciated. I put it in the freezer( an online solution), restarted it to factory settings, reset my wifi and nothing everyone one says there are many 4s's that are doing this since the new software. Sounds like they just want you to buy new phones and my contract is not up for one year with my provider, I am very frustrated and disappointed.

    burkey7669 wrote:
    I put it in the freezer( an online solution),
    No intelligetent person puts electronics in the freezer.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  If none of this resolves, then the device should be taken to Apple for evaluation.
    If Apple determines the device has suffered a hardware failure, they will either replace under warranty (if under warranty) or offer an Out of Warranty replacement.
    So what exactly is the problem?  They offered an Out of Warranty replacement for the defective device.

  • Hp Photosmart not working with new router

    My Hp Photosmart D110a will not work wirelessly with my new Netgear N600 router. This is the second new router I have tried. With the first one Belkin I could at least get it to print from my PCs. But never with my IPad. Now the printer will not print from anything. I have reset it, entered new passwords etc. spent hours on the phone with tech support. What to do now?

    @Ann99, welcome to the forums
    I understand your Photosmart D110a model is not working with your new router. I will gladly do my best to help you.
    I have some questions and some things for you to try.
    1. Is the printer connecting to the wireless network successfully when you run the wireless setup wizard from the printers front panel or is the printer not found when you are running the installation from your PC?
    2. What did tech support determine the issue was when you called them?
    3. Here are some guides for you to try, these 2 guides relate to the questions I had asked in the first question:
    Unable to Connect to a Wireless Network When Using WEP Encryption and Shared Key Authentication
    The Printer Is Not Found During a Wireless Network Installation
    4. What Operating System are you running on your computer?
    5. Where are you running the installation from (disk, download or HP Printer Install Wizard for Windows for Windows)?
    Please let me know all of the information and results from your troubleshooting above!
    Have a terrific day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Logitech Pro 4000 not working with new Imac 24"

    Just migrated from a G4 to the new Imac 24"
    Cannot get the Logitech Pro 4000 to work with new mac.
    Contacted Logitech and they said
    "please note that the QuickCam Pro 4000 currently only supports up to Mac OS X 10.2.6"
    However,the cam DID work ,even under 10.4.8 with the old G4...
    Any ideas people..
    Thanks!

    Your nwe iMac is Intel based, which is why the old driver failed/ You could try the driver from IOXperts. They do not mention Intel support, but they do list your camera, and have a free trial.
    <http://www.ioxperts.com/products/webcamx.html>

  • Isub not working with new imac

    the help menu is telling me to make sure that the isub is plugged in, and then to make certain it is selected under sound preferences... the only problem is that the imac is not picking up that the usb is even plugged in- there is no isub option that comes up on the sound preferences.
    the isub works fine on my older mac, but just is not being read on the new one. any guesses other than my old isub is obsolete with my new imac?
    thanks
    -pd

    The iSub is sweet! It's the best sub I've ever had! There's no reason for it to NOT work with the new Macs. It's a bummer. I still have my iSub, maybe they'll start supporting it again someday.

Maybe you are looking for

  • How can I add text to a pdf

    How can I add additonal text to a saved pdf?

  • How do I get rid of these rough unfinished lines at the top?

    Hi I tried to attach this image in an ai file, but I got an error saying this: [The content type of this image is not allowed.] Does anyone know why I can't send this ai file. It's not too big, it's only 194 kb. Anyway, my other question refers to th

  • Psc1210xi all-in-one will not "pull in" the paper

    The rollers that "pull" the paper into the printer are not turning ! What could be causing this ?I have enough experience and tools to remove the top of the machine to re-align and/or replace the part (most likely a gear wheel or "belt") if necessary

  • Unable to start JWS

    I had Win 2000 ifs 1.1 loaded and running fine until McAffee was installed. Now JWS will not start. Error log shows "JAVA(tm) Runtime Loader Version 1.1.8 Usage: jre [-options] classname [arguments] Option: (list all cmd line options) Program pathnam

  • TS1398 iPhone 5 forgets netgear password? Any help?

    2 of us with a iPhone 5 wand they ill not remember the netgear wifi password. All the other apple products (iPhone 4, iPad , Macs) all work on the network no problem