Wifi switch is not working ios-7.1.1

iphone 4s
version: ios 7.1.1
wifi & bluetooth switch is not working.

Hello there, pragneshgajjar.
The following Knowledge Base article provides some great information that can help you with your issue:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Additional troubleshooting information is located in these articles as well:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
and
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because its a prestiage of Apple Company.
Pls inform me how can i resolve the problem of wifi.

You have to go to autherized iPhone agent.

Satellite A110 - WiFi switch is not working with new WiFi card

Hello Everyone
I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working.
New wifi card is discovered and drivers working correct but when I try to scan for wifi networks with IntelPro/Wireless software I have message to turn on hardware switch but it's turn on and not work. On old wifi card swich is working correct - orange light is on. On new card light is off and swich is not working.
Please help

Hi
Maybe you could enable the Wlan card using different way;
Go to device manager -> WLan card properties -> Advanced tab
There you could check if there is a option which would enables the WLan.
Its worth a try
Otherwise its a compatibility issue like suggested by PinkPanther
I read in different threads that this could happens if there is a different pin assignment on miniPCI WLan card and this could not match with the miniPCI slot on the mobo...

Sound/Wifi switch buttons not working

Hi,
I just booted my computer (pavilion dv6-1120ek) up today & the tactile board isn't working anymore. The light is glowing, but doesn't react to my touch.
Now I can only control sound via sound panel in Windows, but the real problem is the wi-fi, when I try to activate it through Windows, it says "Use the Switch on the front side of the computer, or function keys if available, to enable wirless capability on this computer".
Please if there's anything troubleshooting, that would be great !
Thanks in advance.
This question was solved.
View Solution.

Hi,
Try a Hard Reset as follows.
Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Ios 7 wifi connected but not working

my iphone 5s running ios 7 is connected to my home wifi but its not working, but my pc is doing fine on that wifi. and when i try connecting my iphone to other wifi it seems to work without any problem. i've reseted network settings many times and reseted all settings once but it wouldnt work for me. so whats the problem and how can i fix this?

Try power cycling your router. Remove the router from power for about 30 seconds and then start it back up again. After it is finished configuring, try connecting your device again.

Location switching does not work on Vista

Hi, my location switching does not work. I have reinstalled my Access Connection several time but still does not work. I have several profiles and I need to switch manually depending on my location profile. My Access Connetion however seem to know the right profile (dot next to the profile indicate it picked up the right wireless signal) but never connect to the profile
Is there any Vista feature that is controlling the access as well? Do I need to disable? I remember the older version of Access Connection will ask to disaable some windows services when using Access connection.
My Config is
- R61
- Intel(R) Wireless WiFi Link 4965AG. File Version 11.1.1.16
- OS Vista 32 Business - with up to date patches
- Access Connection 4.42 for Vista Build 7RCN38WW
Thank you in advance for pointers

Hi, my location switching does not work. I have reinstalled my Access Connection several time but still does not work. I have several profiles and I need to switch manually depending on my location profile. My Access Connetion however seem to know the right profile (dot next to the profile indicate it picked up the right wireless signal) but never connect to the profile
Is there any Vista feature that is controlling the access as well? Do I need to disable? I remember the older version of Access Connection will ask to disaable some windows services when using Access connection.
My Config is
- R61
- Intel(R) Wireless WiFi Link 4965AG. File Version 11.1.1.16
- OS Vista 32 Business - with up to date patches
- Access Connection 4.42 for Vista Build 7RCN38WW
Thank you in advance for pointers

HT1222 Certain wifi's will not work on my iPad, it will show that it's connected but will not connect.

Certain wifi's will not work on my iPad, it shows it's connected but will not connect.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Installed iOS7 update and now wifi and Bluetooth not working

My daughters 4s has never skipped a beat - perfectly reliable. Just updated iOS7 with update and now both wifi and Bluetooth not working. Wifi is greyed out and when you go into bluetooth the busy twirly symbol is constantly going round. Can someone please help me as I'm pulling my hair out! My other Daughters iphone 4s is fins BUT she has not downloaded latest update - and she won't until this is resolved. If needs be I will take to store and DEMAND for it to be sorted out - either by repair or replacement as it is wholly a seemingly software issue and nothing wrong with the phone.
Gutted really as I am a huge Apple fan and customer with ipods, phones, iMac & iPads all around. If this is not resolved I fear an Apple drought may begin!

..... ty for the link, however this is the first result googling the issue..... of course it did not work....
it is really unbelivable that plenty 4s devices suffered the wifi troubleshooting just after upgrading to ios7, and finally.... i should burn wifi and bluthoot, and another hardware problems should cause % battery value is disappeared....
all this in one shot....
firmaware is not well working or is somebody bombing our devices to force us to switch to newest?

My hp4530s wifi switch does not enable when selected

hp4530s with windows 7 prof. The wifi switch does not enable when selected in mobility manager in the control panel. The option is shown, however is grayed out and does not enable the wifi

Hi,
When was the last time that WIFI worked on the HP4530s? If you aer using a dock, then remove the laptop from the dock.
You can check the status of the WIFI adapter in Device Manager. You should have something similar to the below image if your model is equipped with WIFI.
The HP Support Assistant and also be used to troubleshoot network issues.
Look under the Internet and Security topics in HPSA for the adapter.
Try diagnostics under the My computer tab in HPSA
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Software Update Point Switching is not working for some Clients

Hi there,
I found nothing similar here and I hope this is the right section.
I´m running ConfigMgr 2012 R2 where one of the Site Systems from one of the Primaries is located in an untrusted Forest in a perimeter Network. The Site System there has the MP, SUP and DB Roles. In general it works great. The Systems in that untrusted Forest
get the SCCM Agent pushed, see and can install published Software packages and receive Windows Updates. But there are a few systems where everything works, except Windows Updates.
So I had a deeper look at what is happening and found out that the SUP switching is not working for them. They always try to contact the SUP from the Primary, which they cannot reach (this is intended).
From how I understand SUP switching as described here
http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx#pi140062=1
the Windows Update Agent tries to connect to a SUP every 30 minutes and after 4 failed attempts he will try to connect to the next one until he finds one which works.
As I said before, this seems to work for most systems in the untrusted forest, but some do not make any intentions to switch the SUP.
So my next step was to find out from where the Update Agent can get the information of the available SUPs. I think they either don´t receive the information that other SUPs exist, or if the Information is there, they don´t realize that there´s an error and
make no attempt to switch.
I used the System Center Support Center to gather all Information from some of the systems with that problems (Log Files, WMI information, registry information, policies etc.) but I cannot find where SCCM or the Update Agent store the information which SUPs
are available in my environment.
I´m sure the problem is on the Systems which fail to connect to the right SUP and not in the SCCM infrastructure itself, because for most of the systems everything is working just perfect. Unfortunately in the Blog Post above there´s also no information
where this information is stored and how it is obtained by the clients. In the comments there´s even one post which describes the same problem I have here, but there was no answer. I hope someone can point me into the right direction, because I´m stuck currently.
Things I tried additionally to all the log file / WMI / registry sniffing:
Removing the Software Distribution Folder and restarting the Windows Update Agent
Removing the WindowsUpdate Registry folder in the HKLM\SOFTWARE\Policies\Windows section in the Registry and restarting the Windows Update Agent.
Tried to reset the WUAgent with wuauclt /Resetauthorization additionally to the steps above.
I also tried to manually set the WUServer and WUStatusServer Keys in the registry to the new Server, but as soon as the next Update Scan cycle runs, the value is set back to the URL of the Primary Sites SUP
Is someone having additional ideas? It seems to me older systems are more affected (which were configured for a standard WSUS before SCCM 2012 was deployed) than newer ones which were installed when SCCM was in place already. But I don´t know what else to
"reset" on those machines without reinstalling them.

Thank you very much for your response. I must have missed that one by looking through numerous Logfiles. In this, there´s indeed a list of all available SUPs. So according to the LocationServices.log the machine should have a choice.
The WMI Key however, contains just one entry and this is the URL of the Primaries SUP which is not reachable in the untrusted forest. Is it OK that the WMI entry includes only one entry? If yes, what process is putting the results from the LocationServices
into WMI? It seems like the Windows Update Agent is feeded from the WMI Key then. If this is the case my problems seems to be the "communication path" between these two components.
Is this the job from the SCCM Agent, the Windows Update Agent or maybe some third component I´m not aware of? I wonder how I can fix this.

Why wifi hotspot is not working with Iphone4S? but with many other friends its working fine.

My wifi hotspot is not working on my Iphone4S

Thanks deggie for replyng.
Actually on my phone personal Hostpot won't turn on. it say contact your service provider. But I could connect to other phone's wifi easily. On of my friends has the same iphone but he could easily turn on personal hotspot and he is using the same carrier "vodafone". Also he has not contacted to vodafone to unable this setting.
only difference is that he purcahsed iphone 2 months back and mine is 10 months old. but its the same Iphone 4S

My wifi driver is not working with windows 8.1 in my MBA2013?

My wifi driver is not working with windows 8.1 in my MBA2013?
i installed windows 8.1 with bootcamp, everythigs seems to be working fine except the wifi,
please help me to solve this problem,,
thanks

neokenchi wrote:
hi erabbath,
Welcome to the Forums.
If you have the Intel Centrino N2230 Wireless + Bluetooth adapter, can you try to:
1. Navigate to the Control Panel (large icon view) > Devices and Printers and try to pair a bluetooth device (i.e. Bluetooth Headset) and observe if it gets detected under the device list.
2. If the Bluetooth Headset is listed but it's not working try toright click on it > choose Properties. On the bluetooth properties Window, go to the Services Tab and check all the appropriate bluetooth services.
Sample picture
Let me know your findings.
Regards
Thank you very much for your answer,
I went to Control Panel > Devices and Printers and i tried to add a new device as the bluetooth doesn't appear this is what i got. By the way the bluetooth was on.
Link to picture
And this is what i have on the Bluettoth
And it search endlessly whereas before the upgrade it was working properly,
All the drivers are up to date as well as windows updates are all installed
Thanks in advance for your help
Regards
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

My off switch is not working

My off switch is not working on my iphone 5

Make an appointment at an Apple Store and have them evaluate the device and possibly replace it if still under warranty.
In the meantime, you can enable AssistiveTouch which floats a virtual button on-screen which can mimic all hardware buttons on the device:
Settings>General>Accessibility>AssistiveTouch: turn ON
*Note* If you power off the device using the AssistiveTouch panel (tap the on-screen AssistiveTouch button, Device>Lock Screen (tap and hold to power off)), you will NOT be able to power on the device if your Sleep/Wake (power) button is not functioning. You will need to connect the powered off device either to a PC's USB port or an external charger to power the device back on.

My i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting general

my i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting >general<reset<reset network setting. but all in vain. tell me the solution

restore your phone as new through itunes. if the issue persists after a factory restore via itunes, it means you've got a hardware issue and the phone needs to be repaired

HT201412 my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

Here you go:
http://support.apple.com/kb/ts1559

Wifi switch is not working ios-7.1.1

Similar Messages

Maybe you are looking for