Wifi symbol won't show?

I have a 32 Gb 3G+wifi and for some reason my wifi symbol will not show up. I can still connect to it though and my 3G I made sure was turned off so it still works but the symbol won't show up. Right now in the top left it says "iPad" with no symbol next to it. Any suggestions? Thx in advance

thirsty31 wrote:
I have a 32 Gb 3G+wifi and for some reason my wifi symbol will not show up. I can still connect to it though and my 3G I made sure was turned off so it still works but the symbol won't show up. Right now in the top left it says "iPad" with no symbol next to it. Any suggestions? Thx in advance
Quickest thing to try is restarting the iPad. Hold the Sleep/Wake button until the 'slide to off' appears and slide it off. Then restart.
If that doesn't work you can try a full reset. Hold the Sleep/Wake button and the Home button until the Apple logo appears. Let it reboot.
You could also try resetting the network. Settings->General->Reset->Reset Network Settings.

Similar Messages

Changes inside a symbol won't show up on main timeline

So I'm working on the animation of a character, I've set up a main graphic symbol for the whole character and an individual symbol for each part of the character inside the main symbol like each arm, leg, hands, ect. Whenever I click into a specific object and animate it on its own timeline and leave it to the main timeline, the animation I did doesn't show up on the main timeline, if I go back in, it's working just fine. I figure I could animate on the main timeline solely, but I'd like to do it the right way. What's going on?
Thanks, everyone

You could also select the movieclip on your timeline and then switch it to graphic (play once/ or loop) in the properties panel.
This way you can see what happens inside when moving your playhead along in the main timeline.

UltraNav driver symbol won't show up in task bar

Hi,
The little ultranav symbol that was normally in the bottom right, where I could disable the trackpoint or the mouse pad, isn't there anymore. That's been the case since the last update, around beginning of May. I re-installed the driver, same problem. What can I do to make it reappear? Would be quite useful to have the ability to turn off the mouse pad.
Thanks for your reply!

http://support.apple.com/kb/TS1538

No wifi symbol

The wifi symbol isn't showing at the top of the screen on my iPhone 4. It used to but now it only shows the 3G symbol even though it says its connected to the wifi. This is happening while connecting to my own and my mums Internet. What's going on?

Try starting with a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if that appears.
If the WiFi button is greyed out, work thorugh http://support.apple.com/kb/TS1559 and if that doesn't help, some have found it works to:
     Settings > Airplane Mode ON and Do Not Disturb ON
     Power down and wait 5-10 minutes
     Power up
     Settings > Airplane Mode OFF and Do Not Disturb OFF
If that doesn't help, backup the content and Settings > General > Reset > Erase All Content and Settings so it is back to factory condition and then restore from the backup.

Wifi symbol missing plus phone won't switch off

My wifi symbol is missing from my screen, settings say I am connected, checked this by turning cellular data off and I can still access Internet so I must be connected.
Thought by switching off and turning on again might fix the issue but my phone won't switch off.
Can anyone offer any assistance? I'm a bit of a technophobe so need things in laymans terms please.
My iPad and another iPhone are showing as connected to the same wifi network.
I have an iPhone 5.

RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

Why do I have a E showing where my wifi symbol should be.

why do I have an E showing where my wifi symbol should be on my iphone.

Because your iPhone is not connected to a wi-fi network or the wi-fi symbol would be shown.
"E" means your iPhone is connected to your carrier's EDGE network for internet access.

HT4796 I'm transfering info from my old pc to my new macbook pro, using Windows Migration Assistant. All was fine but has now lost connection (wifi) and won't reconnect. Mac is showing transfer window and I cant escape, I'm new to mac.

I'm transfering info from my old pc to my new macbook pro, using Windows Migration Assistant. All was fine but has now lost connection (wifi) and won't reconnect. Mac is showing transfer window and I cant escape, I'm new to mac

You'll need to erase the drive by booting up holding command-option-r keys into your Recovery Volume.
Use Disk Utility to erase the disk and then Internet Recovery. That will take a while.
http://support.apple.com/kb/HT4718

My ipod touch wont connect to the internet but shows the wifi symbol

My Ipod touch 5th generation wont connect to the internet. It shows the wifi symbol at the top and says that im connected and all but safari or any apps that need internet to be used like kik instagram tumblr twitter and other apps like that just tell me "no connection" ive reset everything literlly everything. I rejoined my network ive restarted my ipod reset my network settings nd rbooted my router ive reset my entire ipod and nothing works. Help me please?!

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

TS1398 After updating to iOS 7 my iphone 5 won't show any wifi networks or connect to any wifi even after resetting the network connections. HELP!

After updating my iphone 5 to iOS 7 my phone won't show any wifi networks or connect to any. I reset the network connections and still nothing.

I Just found it on the apple site, it arrived on a cd a few days later and worked just fine again.
i would recommend backing everything up just in case. Better safe than sorry, trust me. I've lost so much when i didnt back up once when re-installing the system.
IT shoulldnt erase everything, bt it might, so back up just in case
should you loose everything, then i have some tips on moving stuff fromyour iphone/ipod to the computer

I can't load 1 Imovie project. Imovie shows 5 projects but only 4 icons show of those. 1 projects symbol won't come up so I can't click on it to work on or play. Please help me as there's lots of work on this project I don't want to lose.

I can't load 1 Imovie project. Imovie shows 5 projects but only 4 icons show of those. 1 projects symbol won't come up so I can't click on it to work on or play. Please help me as there's lots of work on this project I don't want to lose.

The performance fixes is a biggy for me, though the other missing
stuff I use makes me have to use both versions for various things:
"but they seem to be committed to another release/version."
Well ... now that's the rub. I would actually welcome this intermediate version to play with (even with the cost of upgrading) if I could rely on it to be finalized into 6.0, full featured, without it taking as long as it has to Upgrade from AA3.0. I would say it was a VERY smart move to give us a preview of 6.0, if I felt in, say, six months they would provide us the fully functional update. But, HOW many years has it been. I felt screwed over while they played around with Sound Booth.
I was with you for a minute in most of what you said, until your credibility went down a couple notches with me on the statement trivializing midi functionality. I though that was a very clueless statement:
"but I have no need for a midi controller and if I want a drummer to keep perfect time I'll get a drum machine."
It does make some of your other statements suspect, tho I won't take it as far as therealdobro's "what's your stake" question.

TS1398 the wifi symbol in the settings have been fainted and showing no wifi, even i cant touch and pen it

hey guyzz plz help me i cant touch my wifi symbol of iphone 3gs.....

Not a good sign. Here is Apple's article on that. Frequently it is due to a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
iOS: Wi-Fi or Bluetooth settings grayed out or dim

Pearl 9105 - WIFI Symbol greyed out

Hello forums,
I have an issue with my Pearl. The WiFi symbol has stayed greyed out even though it says it has connected to my WiFi, home network. It is similar to what happened during the outage that happened.
I have reinstalled the software (OS 5) O2 won't allow upgrade to OS6. I have deleted the WiFi connection and re installed, but still it won't go white and it is affecting my mobile data usage as my phone is using the network signal for internet rather than WiFi.
Any suggestions on how to solve?
Cheers
Martyn

MadMartII wrote:
Unfortunately the KB was very useful as I already knew that exsisted. Though it does tell me that my phone has not connected up to the Blackberry Infrastructure but don't know how to get the phone to reconnect?
Wait...so in Manage Connections > Services Status, the status of BIS is "Not Connected"? If so, then you have bigger issues...in which case I suggest (with your BB truly functioning on your carrier network...turn the WiFi radio off to be sure) the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
See if that get's the BIS Services Status to at least say "Mobile Network". If it does, then try WiFi again (a Service Book may have been missing, and the resend may have obtained it). Otherwise, if you can't register and/or can't receive Service Books, then contact O2 for formal support as your BB is not properly connecting to them.
MadMartII wrote:
I have downloaded a version of OS6 but am concerned about branding will downloading it from another carrier cause any issues?
The ONLY thing that happens is if, at some point when you seek formal support from O2, they discover that you are using an OS level that they do not sanction, then they can refuse to provide support to you until you fall back to their supported version. But thousands of folks (maybe millions???) are using OS packages from other carriers all the time with no ill effects whatsoever.
There is a "trick" necessary to use another carriers OS package...let us know if you desire to proceed down that path and we can provide what you need.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

IPhoto suddenly won't show windows anymore, help, anyone?

Since I've been using Lion I expierence all kinds of problems. I regret updating ever since.
For example, my internet connection keep turning of every couple of minutes (while all other divices at home stay connected). My solution is to turn my wifi off, wait a while and than turn it on again. It's really poor when one uses the best iMac there is. But I guess that's Lion. I got used to it.
But my question:
iPhoto suddenly stopped working (at first it did work!). It does start, but it won't show any windows.
I've deleted the cache, restarted my iMac, no result.
It all began when I plugged in my iPhone.
Now I'm no longer able to backup my photo's anymore.
Can anyone help?
I've also tried cicking the icon while pressing alt and cmd, for more options, but it doesn't work...
Hopefully one of you know the solution!
Thx!
A.

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

Songs won't show on iphone5 but itunes on Mac says they are there.

Hi guys,
On my iTunes on my Mac it shows that there are songs and playlists on my iphone (both when usb plugged in and on wifi) but on the actual device they won't show. Only about 10 songs show up. There is plenty of storage space on the device and they were there before but disappeared after an update. I've tried re-syncing and dragging them over manually but nada. Some of the playlists show but are empty on the device. Any ideas? Thanks.

Hi HeyBayLondon!
It sounds like you may want to try restoring your phone and then re-syncing the content from your computer to see if the information will show up after that procedure. Information on doing that can be found right here:
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Thanks for coming to the Apple Support Communities!
Regards,
Braden

HP Photosmart 7510 touch screen, power light and wifi lights won't turn on

I bought my HP Photosmart 7510 over a year ago, just past warranty. I've printed less than 50 pages total at home and only 3 photos. Just as of two days ago, the touch screen decided not to work anymore, and the lights that usually come on next to the power button and wifi icon won't come on either. However, when I turn it on, the same tones sound out and the scanner and ink jets move around in their usual set-up. I've troubleshooted with trying several different ways of restarting it, but to no avail.
HP tech support phone line was a joke, I got told by the first representative (before telling him which product I had or even offering to troubleshoot) that he was going to send a repairman to my house for $149. Over the price of my printer. So I tried calling back and spoke with a young woman who, when I asked if she would help me troubleshoot my printer, said "you can't troubleshoot that, only software". Then insisted that I pay $130 for a new printer. When I asked to be transferred to her supervisor, I was yelled at, told to again buy a new HP printer, and pushed off the phone.
I have had several HP products, I always seek them out for the brand name and have trusted the merchandise. But one year of life in a product is just silly. And unforturnately, I won't be able to convince myself to buy another one for that kind of lifespan unless I can fix this. I know I'm not the first one with this issue, is there a RECALL I'm not aware of? How can I get this puppy working again?

Hello cbroomhead,
I am sorry to hear about your Photosmart 7510's touch screen showing blank and not working. I understand you can still hear the printer warming up when you power it on. I would like to post you a troubleshooting guide below to try in hopes to correct the issue.
If you have tried all of the steps and the screen is still blank, you can also try another power cable if you have one.
Blank Control Panel Display
If you are able to have the screen come back on, also check for a Firmware Update.
I hope this helps!
Regards,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Wifi symbol won't show?

Similar Messages

Maybe you are looking for