Wifi sync works for iPod but not iPad

I've seen lots of questions raised about wifi sync, most of which seem to have been resolved by checking the box in iTunes to enable wifi sync. My issue doesn't seem to be resolved so easily.
I have checked the iTunes box to enable wifi sync and turned off my firewall. I have reset my router. I reinstalled iTunes, and I even just reset my iPad to defaults and reloaded from scratch. Still, wifi sync doesn't work. It is working just fine on the same Windows PC with my iPod.
Anything else I could try?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
 Cheers, Tom

Similar Messages

Ios 5 wifi syncing working on iPhone but not iPad

I've updated all my devices (mbp to 10.7.2, iPhone 4 and iPad 1 to ios5). I've turned on wifi syncing for both the ios5 devices. The iPhone syncs just fine over wifi (when I unplug the usb cable it stays in the DEVICES list, when I plug it into an ac charger the wifi sync starts). The iPad doesn't. When I unplug the usb cable it disappears from the DEVICES list. Any ideas?

When I went to bed last night I unplugged my iPad from my mbp and it disappeared from iTunes. When I got up this morning, it showed up in iTunes (I didn't even have to plug it in). When I plugged the iPad into my AC charger, iTunes saw it and started a wireless sync. Go figure. Maybe it was just a time issue. I'd done my iPhone yesterday morning and my iPad last night. Maybe iTunes needs a few hours to actually recognize the wire connection..........

Wireless works for Toshiba but not IPAD

The wireless in my house via a linksys 2100L. My Toshiba netbook easily picks up the signal in my bedroom but my IPAD does not. The IPAD picks up the signal in the living room so it is not a configuration issue.
Any suggestions? Thanks

Hello mountainpose,
The following article provides troublehsooting steps that can help get your internet connection working correctly.
Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
http://support.apple.com/kb/TS1317
Cheers,
Allen

Airport Express: Wifi works for MacbookPro, but not iPad or iPhone? Defective device?

Hi All,
Just got a brand new Airport express installed, and the wifi works perfectly fine with my macbook pro, but for some reason it does not work with my mobile devices.
My iPhone and iPad both work on other wifi networks. They are able to connect to the wireless network I set up, but there is not internet connectivity.
Do I have a defective device? Is there something else I can do to troubleshoot?
Thanks in advanced

Hmmm, I doubt it's syncing cxausing it.
Try Apple's Express Lane...
https://expresslane.apple.com/

TS1369 I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not in itunes. At this point my ipod is connected to my computer but when it finishes syncing it's no

I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not on itunes. The ipod is initially connected to my computer, I can see it when I look on devices in my computer. However, when it finishes syncing it is no longer detected to my computer. I cannot transfer any of my songs to my new laptop because of this. I have tried to reinstall itunes, reset my ipod and use a different port. None of these things worked. Any ideas?

rubicon53 wrote:
I just bought a new laptop and my ipod nano will not stay connected to my computer.
I cannot transfer any of my songs to my new laptop
How to use your iPod to move your music to a new computer

Album Art works for most, but not all

I was reading previous forums on the subject, but no clear answer was given..
The album art shows up fine in itunes and my library and works for most of my music on my ipod, but how come some album's art does appear? I have it set manually and select 'Get Info' then 'Artwork' and add it from there, then drag in the finished product to my ipod. I've been doing that and it works fine for most of the albums, but every so often, the album art will not appear on my ipod. Am I doing something wrong? I take them all from the same source (amazon.com) but it makes no sense to me how some randomly don't appear.
I tried deleting the artwork and re-adding it, but nothing happened again. If you could answer why it works for most but not all or how I can get the album art to appear for the ones it will not by re-doing something, it would be appreciated. thanks.

I encountered the same problem in the beginning. When I compared the size of the original images, the working ones seemed to be smaller in general, so I reduced the size of all covers I intended to upload on the pod to 300x300 pixels.
This seemed to work - for 2 days. I bought the pod on friday, had pictures on sunday, but on Monday (after the first time the pod was fully discharged) none were left left.
So I ended searching this forum for related problems...
And decided to join my problem to this entry.

My sound works for music but not apps

My sound works for music but not apps

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

Can firefox support "file:///" format to access local files (note 3 fw slashes) this works for IE but not firefox and is the format used in the "afghan war diary" from wikileaks

can firefox support "file:///" format to access local files (note 3 fw slashes) this works for IE but not firefox and is the format used in the "afghan war diary" from wikileaks

See http://kb.mozillazine.org/Links_to_local_pages_do_not_work

HT3387 When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

http://m10lmac.blogspot.com/2011/06/extra-spell-checking-dictionaries-for.html

Password works for login but not for the Adobe CC Desktop application

Password works for login but not for the Adobe CC Desktop application

Please refer to http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
ou can try deleting OPM.DB from steps below and try again.
Mac OS: You can locate the OPM.db file in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user Library folder, see Access hidden user library files | Mac OS 10.7 Lion. - http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html
Windows: You can locate the OPM.db file in the :\Users\\AppData\Local\Adobe\OOBE folder. To view the hidden AppData folder, see Show hidden files, folders, filename extensions | Windows XP, Vista, Windows 7. -http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-ex tensions.html
3) update to the latest version of the Creative Cloud app.
Also we would like few more details:
When has this issue started occurring, was this after installation of any specific adobe product.
On which platform are you seeing this.
Also we would like to know if after above steps this issue occurs ever again in future.
You can refer to http://forums.adobe.com/thread/1239510
Regards,
Rajshree

Flash shockwave 11.5 works for youtube but not amazon instant video

Shockwave 11.5 r502 works for Youtube but not for Amazon Instant Video.

Hi,
It asked me if I wanted to install something to make the videos load faster -
Check Safari / Preferences - Extensions. Might be lurking there. If so, select the plugin then click Uninstall.
Check:
~/Library/Internet Plug-Ins (~) Tilde character represents your Home folder
Check:
/Library/Internet Plug-Ins
/Library/Application Support
/Library/Input Managers
And check your Safari downloads folder. If the file is still there, double click to open. Might be an uninstaller you can use.
Help here for troubleshooting Flash
Carolyn
Message was edited by: Carolyn

ITunes/Apple Mobile Device works fine w/iPod but not iPad

Hi. I'm getting stuck on this and would like some help to solving this problem. Basically I'm trying to sync my iPad; however, whenever I connect it, this meesage pops up: "this iPad cannot be used because the Apple Mobile Device is not started." The problem is that when I try to plug in an iPod using the same wire, it works fine, no problem, but the iPad just won't connect. I have since uninstall and reinstall all Apple components (iTunes, AMD, QuickTime, etc) and it's still the same thing...iTunes connects fine w/ the iPod, but not the iPad. What to do? Thnx in advance.
EDIT:
Btw, I've tried to connect the iPad while the iPod is connected, and the "Apple Mobile Device is not started" error message pops up too, which is weird, because the iPod is connected and syncing at that time...which means the Apple Mobile Device thing IS started. >.>

The iOS devices use Apple Mobile Device Service, while older iPods use the iPod Service.
Checkout this Apple document -> How to restart the Apple Mobile Device Service (AMDS) on Windows
Are you able to restart the service after following the steps in that article?

Why does my app store account tell me that my payment method does not match my bank's records. my card is valid and works for iTunes but not the app store.

While trying to change my Credit Card info: The app store tells me that my payment method information does not match my bank records and to try again or enter a new payment method. My CC is valid and its the same CC ive had for a while. This CC info works for iTunes but is not being accepted for the App store.I have changed this info online but cannot change it on my iPhone. Can anyone tell me what i need to do?

Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

Table of Contents page numbers works for PDF but not for other formats

Hi,
I followed exactly was indicated here regarding creation of TOC.
http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e12187/T421739T481157.htm
The page numbers generated correctly for PDF but not for RTF, HTML and XLS.
(HTML and XLS are understandably not paginated in nature but why not in RTF?)
Tried to make the simplest example work, with 2 headings each on a separate page. Doesn't work on either MSWord 2003 or 2007.
What am I doing wrong?
Regards,
Jarell
Edited by: Jarell on Jan 11, 2012 8:08 PM

Hi Kavipriya,
What is your email address? I have attached a file in Oracle Metalink, under SR 3-5172030861. named test_toc.rtf
You may use any xml because the template does not use any dynamic binding of values.
The template is basically 2 pages, the TOC in the 1st page. First TOC item (Heading 1) is in Page 1, and Second TOC item is in Page 2.
So the end result should be (PDF result from BI Publisher):
First TOC Item .................. 1
Second TOC Item ............. 2
But for RTF it outputs:
First TOC Item .................. 0
Second TOC Item ............. 0
And after doing Print Preview (once or twice)
First TOC Item .................. Error in Bookmark
Second TOC Item ............. Error in Bookmark
Hope this is detailed enough to illustrate the problem.
Edited by: Jarell on Jan 17, 2012 10:24 PM

AirPlay works on 4s but not iPad Air

Airplay works on my 4s but not my iPad Air. It lags behind or cuts off. I've up dated both devices with 8.2 version. I also reset network on iPad air, and restarted all devices. Can anyone help!! Why would AirPlay work on 4s iPhone but not iPad air?? Oh! I have a 3rd generation apple TV.

It don't work across the internet only over lan network

Wifi sync works for iPod but not iPad

Similar Messages

Maybe you are looking for