Wifi syncing not working since upgrading to iOS 6

Has anyone had an issue with and found a solution to wifi syncing after upgrading to iOS 6?  I have not been able to get either my iPhone 4 or 3d gen iPad to sync since upgrading last week.  I have the latest version of iTunes. I've tried disabling wifi syncing and the closing/restarting iTunes.  I've tried turning my iMac's wifi off and on.  The devices show, but will not automatically wifi sync. 
Thanks in advance!

I have a variation on that problem.  I upgraded my iPhone 4s and my new iPad to iOS6.  No problems synching the new iPad to iTunes wirelessly.  My iPhone will not sync wirelessly unless I turn it off, then on again.  However, if the phone goes out of wireless range, then returns, it will no longer sync wirelessly to iTunes.  Otherwise, the wireless connection appears to be working, e.g., I can connect to the internet.

Similar Messages

  • IMessage not working since upgrading to ios 5.1 iPhone or iPad??!!

    Both myself and my partner have iPhones. I'm on a 4S she has my old 3GS. Since we both updated to 5.1 iMessage doesn't work, anyone I know who hasn't upgraded past 5.0, iMessage still works. Any ideas. Auto time update is on, on both handsets, it's strange as it was working for a few days after the update then it suddenly stopped one afternoon and hasn't worked since.

    Try turning iMessage off, wait a few minutes, then turn it back on.

  • My iphone 4s wifi iz not working after upgrading to ios 7.1

    any sugestions ???

    We need more info to troubleshoot. What do you mean by "not working?" Wireless switch is on? Home router or public networks? Please be more detailed in describing your issues.

  • WiFi not working since upgrading to IOS 7.1.1 on iPhone 4

    Can't connect to any WiFi since the IOS upgrade.  Ive reset networks, turned airplane mode on/off and powered phone off and on.  Nothing works!
    Is this a known bug?   Any fixes available? 

    No, it's not a bug.  It is most likely an issue with your specific device.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If the issue persists, take the device to Apple for evaluation.

  • Wifi Sync not working on iOS 6 and iTunes 10.7 with iPhone 4S

    I am running Windows 7 64-bit but WiFi Sync is not working on either my iPhone 4S or my wife's iPhone 4S.  Worked fine before upgrading.  All settings look correct in iTunes 10.7 and on our iPhones 4S's.  Already tried uninstalling iTunes and all associated Apple programs (Bonjour, Apple Mobile Device Support, Apple Application Support, etc) and reinstalling iTunes but no help.  Temporarily disabling Norton Firewall did not help.  If I hook up either of our two 4S phones via USB wire, they Sync and Backup fine.  Just WiFi Sync not working.  Can't initiate sync from iPhones because button is ghosted stating it is waiting for PC to be present.  Phones don't show up under Devices in iTunes unless hard-wired via USB cable.  Any suggestions?

    I am getting sync issues too (although on OSX) - seems like others are getting issues too:
    https://discussions.apple.com/message/19834721#19834721
    Good luck,
    Chris

  • IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

    iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

    I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

  • HT3258 My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion.  I was wondering if there is a solution to getting this working again?

    My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion.  I was wondering if there is a solution to getting this working again?

    You just need to update it to the latest version.  See:
    http://kb.parallels.com/114449

  • Home sharing on apple tv not working since upgrade to yosimite

    home sharing with my Apple TV (gen 3) and iMac not working since upgrading iTunes (12.0.01.26) and installing Yosemite (10.10) on my iMac (2008).
    everything worked fine before this!

    Hey stephenfromdominion,
    Thanks for the question. I understand that you are experiencing issues with Home Sharing after upgrading to OS X Yosemite. For troubleshooting information, check out the following resource:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Thanks,
    Matt M.

  • IPhone Home Button not working after upgrade to ios 5.1.1

    Hey everyone,
    I'm pretty sure this is a software failure due to the symtoms the iPhone is showing;
    0 - the home button does not work at all when the phone is turned on and running ios 5.1.1, well it used to work okay when i had ios 5.0.1, I upgraded to 5.1.0 and started working randomly, upgraded to 5.1.1 to see if it was fixed with no luck at all.
    1 - When locked the screen does sometime light up, like when you press the home button and don't slide the unlock button. but it does not exit apps anytime, I mean it doesn't act like it's pressing the home button randomly but only when the phone is locked.
    2- The button does work perfectly when iOS is not running: I can get in and get out of recovery and dfu mode at will, that wouldn't be possible if the button were broke.
    3- what else? Oh yea, not really a symtom: Tried the 'home button calibration' several times.
    4 - It's not filthy, since I really cleaned it thoroughly with a powerful tiny nozed air blower I got and gave a rubbing alcohol treatment too.
    5 - when I shut the phone down it instantly turns back on, I can interrupt the turning on for turning the phone into dfu mode (i'm sure It's in DFU mode because the tinyumbrella log monitor tells me)
    I'm now using the 'soft' home button that goes in the accesibility options, but hey, I didn't pay a ton of money for a phone that the same Apple is gonna break down.
    It's out of warranty and I don't have apple stores where I live.
    I'd downgrade to 5.0.1 in a snap if I could but I'm not into jailbreaking, so the shsh blob thingie is not a possibility.
    Any apple dev around that can give me a workaround?
    thanks a lot in advance
    Added more info ~ 

    I had the same problem with Home button not responding after upgrading from iOS 5.1 to iOS 5.1.1 on an iPhone4.   I solved it but not sure exactly what fixed it.   Here is what I did.
    1.  Took it local Apple store Genius appointment.   They used a special tool and took some lint out of the connector opening.   The Home button started working.   They said even though the phone was out of warranty, I could buy a new replacement one without a contract for $150. 
    2.   The Home button stopped working when I got home.   I got some compressed air in a can and blew the air through the connector to try and clean out more dust.   I now keep the phone with the connector opening facing down in my pocket.   I also struck the phone downward on my hand or other soft surface to force as much dust out as possible.
    3.  The Home button still was intermittent.  I then tried to do a hard reset by holding the power on key and the Home button simultaneously for about 10 seconds.  This doesn't work if the Home button doesn't respond.
    4.  I connected the iphone to Itunes via the USB to sync the phone.  While connected, I did a Hard Reset by Holding the Power button and Home button simultaneously.  I noticed the Home button responded better when connected to ITUNES via the USB.
    5.  I did a backup of the iphone4 by highlighting the iphone 4 while connected to ITunes and right mouse click and selecting BACKUP.    I was prepared to reset my phone4 in iTUNES and restore it from the backup.
    The phone worked consistently before I had to do this.
    6.  As a last resort which I didn't need to do, I was going to copy all my settings for the iphone by selecting the phone in iTUNES and looking at all the sync settings.   I would then have restored the iphone to original factory settings and then sync the phone using the copied settings.  This would have made sure that the backup didn't include the bug.
    Fortunately, I didn't have to do step 5 and 6.   Things started working after Step 4.  So I don't really know if it was the iOS 5.1.1 upgrade or pure coincidence that the Home button stopped working immediately after the upgrade.

  • My morphie pack does not work since upgrading

    My juice pack (Morphie) Does not work since i have upgraded the ios to 7.1.1
    I have two iphones a 4s that has not been updated yet and also the 5s which has been updated. The 4s is working perfectly well with the juice pack but the 5s is absoultely crap to say the least. I complained to Morphie and to their credit the sent me a new pack and it has the same problem. This MEANS since the update there has been a change with apple and they have made our 100€ chargers redundant as I only get 20 - 25% extra battery when I should be getting a full charge
    This is not acceptable for phones that are expensive and the accessories that we buy to go with them are also an additional expense and very expensieve to. That doesnt matter too much when they work, but then they dont it is NOT good.
    Someone come back to us and give us a solution please.
    Elena - a very loyal apple client with apple imacs in the office, mac book pros and air mac for sale staff along with ipad minis and iphones......... NOT A HAPPY CLIENT

    3l3na t wrote:
    Thanks guys for the responses but I am not convinced this is a MOPHIE problem. Their customer service department have been great and look after their clients. I have two iphone 4s´s which have not been upgraded for fear of being left with the rubbish battery I have with my relatively new iphone 5s. Mophie have replaced the amost new juice pack that I had with a completely new one that has the same problem...... funny how this has happened since the ios 7.1.1. update
    I have been using MOPHIE juice packs for a number of years and have never experienced anything like this before. It seems rather strange that after upgrading I have this problem that APPLE negates to rectify.
    Of course I wouldn´t have to use a 3rd party accessory if the battery was made to last and if APPLE had an alternative, I would of course buy apple but they don´t. I am a huge fan of Apple but cannot run a business with phones that cannot be upgraded for the fear of loosing battery life which would mean loosing clients which would mean loosing my lively hood.
    Full phone restore was done too.
    Still not HAPPY
    Sorry, as already stated your using a 3rd party accessory take it up with mophie.
    I have no issue with my mophie after updating to 7.1.1 - so your theory is flawed.
    My battery life can last up to a day and a 1/2 - I only bought the mophie as a backup battery and because it is bulky and can protect my phone in case I drop it.

  • Canon Printer mx860 not working since upgrade to Yosemite, it is connected to my Mac via usb.  Any suggestions?  Thanks. LL

    My 2009 Canon MX860 Pixma printer not working since an upgrade to Yosemite on my MAC version 10.10. It is connected by USB.  Have had no previous issues with printing, scanning or faxing.  When trying to print my Calendar I only get light vertical dotted lines, none horizontal, no words and vague header colors. Checked printer image on the  on my MAC which shows the same problem.  All of the color and black cartridges are new.
    The recent upgrade to the Canon application says it is completed but it is not, image on application upgrade is a circle with an X.
    Any suggestions?  Could this simply be a compatibility problem?  I'd sure like to keep my Canon printer.
    Thanks,  LL

    Can you open System Information (Applications > Utilities) and select Printers in the left sidebar. If the MX is the only printer connected to the Mac then its information will be shown in the right pane. If you have more than one printer, then a list will be shown in the top right pane. Select the MX to see its information in the bottom right pane. Can you copy this information and paste back here for me to check.
    Also an FYI - this is the Mavericks forum. The Yosemite forum is here

  • TS1559 is there any solution to wifi & bluetooth, not working in 4s post IOS 7.0.4 update?? pl require a solution badly !!!

    is there any solution for wifi & bluetooth (gone grey), not working in 4s post IOS 7.0.4 update?? pl require a solution badly !!!

    If they are grey then the WIFI card has gone bad at this point, service would be needed

  • ITunes WiFi sync not working after Lion reinstall

    Hello all,
    Here is the situation. Wifi syncing was working superbly well for both my iPhone and my iPad. They could be upstairs while I was downstairs in my office and I would see them both in iTunes and could sync them at will. Great stuff!
    Until yesterday. I bought a new hard drive for my Macbook Pro, installed Lion on it and imported all of my apps and settings on it. Everythings works fine EXCEPT for wifi syncing. When I plug my devices to the USB cable I see them appear in the iTunes sidebar but I soon as I disconnect them, POOF! They're gone!
    The checkbox IS checked. I tried unchecking it, syncing via USB, rechecking it an resyncing to no avail. I just can't get the darned thing to work again!
    Both devices and the laptop have been restarted multiple times.
    Any ideas?
    Thanks!

    Can't believe it was so simple.
    I just restarted my Mac and everything came back to normal.
    Ok then sorry for the disturbance, move along, nothing to see here.

  • Signature field NOT working since upgrade to Adobe Pro X

    Hi Forum,
    Form stop working since upgraded to Pro X (ver 10) in Adobe.  Getting this message:
    IntegriSign
    This plug-in is intended for validating signatuers signed using earlier versions of Acrobat.  To sign using this version of Acrobat use "IntegriSign to Acrobat 9.0 and later" handler
    I have changed settings in Adobe Pro X to the above but still get the same message.
    Do anyone know how to fix this?
    Thanks,
    Patricia

    Download directly from Apple and install over what you have now;
    iTunes 12.0.1

  • IPhone 5 iOS 7/Maverick Wifi Sync Not Working

    Since updating to Maverick on my MacBook Pro Retina I have not been able to sync my iPhone 5 over wifi with iTunes.. It's amazing how used to a feature you get and it's actually really aggrevating not being able to do this now.
    It has worked fine ever since I got the both devices, and yet after upgrading to iOS7 and Maverick wifi sync does not work. Before iTunes update 11.1.3 my phone at least showed up under "devices". Now it does not show up at all in iTunes unless plugged in via USB.
    I've tried rebooting routers, forgetting networks, checking and unchecking "wifi sync" on iTunes, and even going to a different locaiton (i.e. a different router) which also used to work fine and same issues. When I go to Settings>General>iTunes Wifi Sync on my phone and tap "Sync Now" it just says "looking for my MacBook Pro"...and does nothing.
    I have seen varying posts about this feature not being available if you opted out of the iCloud or something with iOS7 but can't find a definitive answer. So, is it something which is definitiely no longer available with the new upgrages, or does anyone have a cure?
    Many thanks.

    This is so unfortunate.  Holmdel, I would also report this to Apple to have it on record. 
    You can make Apple aware of this at: http://apple.com/feedback/iphone.html, and in the meantime you'll have to use AssistiveTouch.  Hopefully when more people come forward, they will fix this bug in the next update.

Maybe you are looking for

  • Segunda via de nota fiscal. ( Português)

    Bom dia! Senhores, Tive um problema com um tablet que comprei em uma das lojas da Best Buy em Orlando. Gostaria de saber como faço para obter este documento? Um amigo levará o equipamento na próxima semana para Orlando e então ira fazer a troca! A co

  • New Value addition in Restricted List under Rules not getting reflected

    Hi, I have created a custom rule for a custom profile. In the rule i have configured a metadata named as Reviewer. Under restricted values of reviewer i have put in 2 values. It is getting reflected properly in the profile check in form. But now when

  • Linking to specific collaboration rooms

    Hello Is it possible to link to a specific collaboration room from elsewhere in the portal (from a page/iView)?  Similar to the Related Links function, except not from within another room. Thanks! Chris EP6SP14

  • Best forum on SDN for WM functionality?

    Good day, I am wondering what forum is best for me, MM logistics is pretty close to my area of knowledge but to much finacial posting questions I was hoping I could get your thoughts. Me: SAP support 3 yrs now in warehouse dealing with ALL warehouse

  • Complex algorithm - improve performance

    HI, I have a complex algorithm which takes almost 900 milliseconds per line to process this . I have to calculate the probability for hundreds of thousand lines. Just imagine if have to calculate this for some 500000 lines which is not feasilble at a